Scribd Logo
Upload

Welcome to Scribd!

  • 35 views

    Tutrial 8 Solution

    Uploaded by

    LUZ KARIME LOPEZ ORTEGA
    This document contains 6 questions regarding mechanics problems involving moments of inertia and rotational kinematics. Question 1 asks to determine the angular acceleration of a motor shaft given its constant angular velocities about two axes. Question 2 asks to determine the velocity and acceleration of a point on a rotating disk attached to a rotating arm. Question 3 asks to determine the absolute angular velocity of solar panels on a spacecraft rotating and translating through space. The remaining questions ask to calculate moments of inertia of various objects.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Tutrial 8 Solution

    Uploaded by

    LUZ KARIME LOPEZ ORTEGA
    35 views10 pages
    This document contains 6 questions regarding mechanics problems involving moments of inertia and rotational kinematics. Question 1 asks to determine the angular acceleration of a motor shaft given its constant angular velocities about two axes. Question 2 asks to determine the velocity and acceleration of a point on a rotating disk attached to a rotating arm. Question 3 asks to determine the absolute angular velocity of solar panels on a spacecraft rotating and translating through space. The remaining questions ask to calculate moments of inertia of various objects.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains 6 questions regarding mechanics problems involving moments of inertia and rotational kinematics. Question 1 asks to determine the angular acceleration of a motor shaft given its constant angular velocities about two axes. Question 2 asks to determine the velocity and acceleration of a point on a rotating disk attached to a rotating arm. Question 3 asks to determine the absolute angular velocity of solar panels on a spacecraft rotating and translating through space. The remaining questions ask to calculate moments of inertia of various objects.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    35 views10 pages

    Tutrial 8 Solution

    Uploaded by

    LUZ KARIME LOPEZ ORTEGA
    This document contains 6 questions regarding mechanics problems involving moments of inertia and rotational kinematics. Question 1 asks to determine the angular acceleration of a motor shaft given its constant angular velocities about two axes. Question 2 asks to determine the velocity and acceleration of a point on a rotating disk attached to a rotating arm. Question 3 asks to determine the absolute angular velocity of solar panels on a spacecraft rotating and translating through space. The remaining questions ask to calculate moments of inertia of various objects.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 10

    Ques.

    1 – The small motor M is pivoted about the x-axis through O and gives its shaft OA a constant speed p rad/s
    in the direction shown relative to its housing. The entire unit is then set into rotation about the vertical Z-axis at
    the constant angular velocity  rad/s. simultaneously, the motor pivots about the x-axis at the constant rate 
    for an interval of motion. Determine the angular acceleration  of the shaft OA in term of  . Express your result
    in term of the unit vector for the rotating x-y-z axes.
    Ques.2 – The circular disk of 100-mm radius rotates about its z-axis at the constant speed p = 240 rev/min, and
    arm OCB rotates about Y-axis at the constant speed N = 30rev/min. Determine the velocity v and acceleration a
    of point A on the disk as it passes the position shown. Use reference axes x-y-z attached to arm OCB.
    Ques.3- The center O of the spacecraft is moving through space with a constant velocity. During the period of
    motion prior to stabilization, the spacecraft has a constant rotational rate  = ½ rad/sec about its z-axis. The x-
    y-z axes are attached to the body of the craft, and the solar panels rotate about the y-axis at the constant rate  =
    ¼ rad/sec with respect to the spacecraft. If  is the absolute angular velocity of the solar panels, determine  .
    Also find the acceleration of point A when  = 30o.
    Ques.4– Determine the mass moment of inertia of the steel fixture shown with respect to (a) the x-axis, (b) the y-
    axis, (c) the z-axis. (The density of steel is 7850 kg/m3.)
    Ques.5 – A steel forging consists of a 150 x 50 x 50-mm rectangular prism and two cylinders of diameter 50 mm
    and length 75 mm as shown. Determine the moments of inertia of the forging with respect to the coordinate axes,
    knowing that the specific weight of steel is 7850 kg/m3.
    Ques.6 Compute the component of inertia tensor at the center of a solid sphere of uniform density  as shown
    in Fig.
    ,l t+t 4tM- a.c{ qfr. r'o {r".t,rLas, Oe ,L*uu
    ry Svaf-.
    r yl rt
    ft*n4
    j c,,r e)J I * a,
    a,g+1, 0 tr*r',tzo a

    tr,ffru(- *;!,o J+a.


    =r,ff ,{*i4 e,}qa*,f ,f_f (nn)*df4^
    Intograkrb rcrf\ *Tn ef 4e {; u}z
    ff+
    "ry
    ryy : fJ (9G) Ur) in t-t"jurn'r(g) (ttr) ctn
    fouail*V /t-.r ?o*,
    n Rf In
    ryy: ff $n rJ 7 3"

    r)r^* , ,f g ,< , fuzntz IY) = *.t


    ^4
    Q* P.,W *gortaa*'w1 reLau-t' W\t 0 ,frQ La)
    Dec-ubc ry r (
    al s c scLLl at ctt
    '/ z"^* = LlL ) A1(
    1,
    Btc-auge Wu Uarcc!.ona'lo-*qtw'Pg qtu-)daft 1:lanuerc'k'a
    ^Y
    ry-*^ff
    ,rr)aV d*4.tL td.'rq ltn P* q b 1ftt' zlrcfr'
    fav ll<E* , 'tr "
    b a f|n' a5
    ** u^c. tEe-r4tV -{polaT es'r)
    T h

    a\o 2_

    4D
    / r'rtK" c

    J
    5

    L 0Au j
    J

    You might also like