Product Certification and Declaration of Conformity

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

PRODUCT CERTIFICATION AND DECLARATION OF CONFORMITY

Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES), Model Avio 200
This is to certify that this PerkinElmer product was tested and verified to be in conformance with all applicable quality requirements,
including specifications, drawings, calibration, preservation, packing, marking requirements and part identification.

Declaration of EMC, Safety, and RoHS Compliance


This PerkinElmer product conforms to the regulations stipulated in the CE Mark requirements for the EMC Directive (2014/30/EU),
the Low Voltage Directive (2014/35/EU), and the RoHS 2 Directive (2011/65/EU):

EN 55011:2009 + A1:2010 Group 2, Class A, EMC -- RF Characteristics of ISM Equipment


EN 61326-1:2013, EMC -- Requirements for Electrical Equipment for Laboratory Use
EN 61000-4-2:2009, EMC -- Electrostatic Discharge Requirements
EN 61000-4-3: 2006 + A1:2008 + A2:2010, EMC -- Radiated Electromagnetic Field Requirements since
EN 61000-4-4: 2012, EMC -- Electrical Fast Transient/Burst Requirements 2016
EN 61000-4-5:2006, EMC -- Surge Immunity Requirements
EN 61000-4-6:2009, EMC -- Conducted Disturbances (induced by RF fields) Requirements
EN 61000-4-8:2010, EMC -- Power Frequency Magnetic Field Requirements
EN 61000-4-11:2004, EMC -- Voltage Dips, Short Interruptions, Voltage Variations Requirements
EN 61000-3-2: 2006 + A1:2009 + A2:2009, EMC -- Harmonic Current Emissions
EN 61000-3-3:2013, EMC -- Voltage Fluctuations and Flicker
EN 61010-1:2010, Safety Requirements for Electrical Equipment for Laboratory Use

CAN/CSA C22.2 No. 61010-1-12, Safety Requirements for Electrical Equipment for Laboratory Use
UL 61010-1, 3rd edition, Safety Requirements for Electrical Equipment for Laboratory Use
ICES-001, Class A, Radiated and Conducted Emissions
FCC Part 18, Class A, Radiated and Conducted Emissions

AS/NZS CISPR 11:2011


Korean Radio Waves Act, Article 58-2, Clause 3
Law on Metrology of the People’s Republic of China (Pattern Approval)

Declaration of System Validation


The product was found to meet its functional and performance specification prior to shipment. To support this declaration, the following
Engineering, Assembly and Test documents are held by PerkinElmer and are available for reference upon request in justified cases and to
an appropriate extent:

The Product Description The System Design Documentation


The Functional Specification The Source Code Documentation
The User Interface Definition The Evaluation Documentation
NOTE: PerkinElmer will maintain possession of all documents and controls their reproduction, including parts of them.

The existence of these documents and the procedures used in their production are formal requirements of the PerkinElmer Quality
Management System. The integrity of the PerkinElmer Quality Management System is routinely audited and has been certified to
ISO 9001 since 1992.

This declaration of conformity is issued under the sole responsibility of PerkinElmer.


Signed for and on behalf of:

Alan Mears 8 September 2017


Compliance Engineer

9932079B.doc PerkinElmer, 710 Bridgeport Avenue, Shelton, CT 06484 USA


[in the EU: PerkinElmer, Chalfont Road, Buckinghamshire, Seer Green, HP9 2FX, United Kingdom]
An ISO 9001 Company

You might also like