Scribd
Upload
47 views

Nandha College of Technology, Erode - 52. B.E/B.Tech Degree Examinations, Dec-2012

This document contains 5 questions about engineering graphics concepts. The questions involve drawing projections, sections, and isometric views of various objects like prisms, cylinders, cones, and pyramids in different orientations. The objects are described by their geometric properties like diameters, side lengths, heights, and angles of inclination. The tasks require using techniques like change of position, sectioning, and perspective projection to visualize and draw the objects.

Uploaded by

Chandramohan G
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
47 views

Nandha College of Technology, Erode - 52. B.E/B.Tech Degree Examinations, Dec-2012

This document contains 5 questions about engineering graphics concepts. The questions involve drawing projections, sections, and isometric views of various objects like prisms, cylinders, cones, and pyramids in different orientations. The objects are described by their geometric properties like diameters, side lengths, heights, and angles of inclination. The tasks require using techniques like change of position, sectioning, and perspective projection to visualize and draw the objects.

Uploaded by

Chandramohan G
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

NANDHA COLLEGE OF TECHNOLOGY, ERODE – 52. 3.

a) A cone of 45mm diameter and 60mm height is cut by a horizontal plane at a


B.E/B.TECH DEGREE EXAMINATIONS, DEC-2012 distance of 15mm from the apex and other plane inclined at 30˚ to HP and meets
the axis at 15 mm above the base. Draw the development of the cone.
(Or)
DEPARTMENT OF SCIENCE AND HUMANITIES
b) A hexagonal prism of base 20mm and axis height 60mm is resting on the
MODEL EXAMINATION – I
ground on its base with a base edge parallel to VP. A circular hole of diameter
GE 2111-ENGINEERING GRAPHICS
30mm is drilled centrally with the axis perpendicular to VP, bisecting and
Max. Marks: 100 Duration: 3 Hrs intersecting the axis of the prism at right angles. Draw the development of the
lateral surface of the prism.
(Answer all the questions)
4. a) Draw the isometric view of a cylinder of base 30mm diameter and 65mm
(5×20=100marks)
height when it rests with its base on HP.
1. a) A pentagonal prism of base side 30mm and axis length 60mm rests on HP on
(Or)
one of the base corners with the base edges containing it being equally inclined
to HP. The axis is inclined at 45˚ to HP and parallel to VP. Draw the projections of b) Draw the isometric view of a hexagonal prism of side base 30 mm and height
the prism by change of position method. of 70 mm when its base on HP.
(Or)
b) Draw the projections of a cylinder of diameter 35mm and axis 55mm long,
when it lies on HP on one of its generators and the base is perpendicular to HP 5. a) Draw the isometric view of a frustum of a hexagonal pyramid when it is on its
and inclined at 50˚ to VP. base on the HP with two sides of the base parallel to VP. The side of base is
20mm and top 8mm. The height of the frustum is 55mm.

2. a) A hexagonal pyramid side of base 25mm and altitude 70mm long rests with its (Or)
base on HP with two of its base sides parallel to VP. It is cut by a section plane
perpendicular to VP and inclined at 45˚ to HP and passing through a point 15mm b) A square prism of base side 40mm and axis height 60 mm is lying on the
above the base and located on the axis. Draw the sectional view and true shape ground on its base with a face parallel to and 15 mm behind PP. The station point
of the section. is 30mm in front of PP and 60 mm above GP and lies in a central plane passing
through a point 30 mm to the right of the right end of the prism. Draw the
(Or) perspective projection of the square prism.

b) A vertical cone of diameter 60mm, height 80mm is cut by a cutting plane


perpendicular to HP and inclined at 40˚ to VP, passing through a point 15mm
away from the axis. Draw the sectional elevation and true shape of the section.

You might also like