Scribd Logo
Upload

Welcome to Scribd!

  • 54 views

    r44 sl37 PDF

    Uploaded by

    Nick
    This service letter from Robinson Helicopter Company provides requirements for installing new C016-7 main rotor blades on R44 and R44 II helicopters. The new blades can be installed as a matched pair on any fuel-injected R44 II. For carbureted R44 helicopters, certain components must be verified or upgraded prior to installation, including hydraulic flight controls, dual tachometers, main rotor gearboxes, fork assemblies, swashplates, yoke assemblies, and pitch horns. Installation instructions and part numbers are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    r44 sl37 PDF

    Uploaded by

    Nick
    54 views2 pages
    This service letter from Robinson Helicopter Company provides requirements for installing new C016-7 main rotor blades on R44 and R44 II helicopters. The new blades can be installed as a matched pair on any fuel-injected R44 II. For carbureted R44 helicopters, certain components must be verified or upgraded prior to installation, including hydraulic flight controls, dual tachometers, main rotor gearboxes, fork assemblies, swashplates, yoke assemblies, and pitch horns. Installation instructions and part numbers are provided.

    Original Title

    r44_sl37.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This service letter from Robinson Helicopter Company provides requirements for installing new C016-7 main rotor blades on R44 and R44 II helicopters. The new blades can be installed as a matched pair on any fuel-injected R44 II. For carbureted R44 helicopters, certain components must be verified or upgraded prior to installation, including hydraulic flight controls, dual tachometers, main rotor gearboxes, fork assemblies, swashplates, yoke assemblies, and pitch horns. Installation instructions and part numbers are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    54 views2 pages

    r44 sl37 PDF

    Uploaded by

    Nick
    This service letter from Robinson Helicopter Company provides requirements for installing new C016-7 main rotor blades on R44 and R44 II helicopters. The new blades can be installed as a matched pair on any fuel-injected R44 II. For carbureted R44 helicopters, certain components must be verified or upgraded prior to installation, including hydraulic flight controls, dual tachometers, main rotor gearboxes, fork assemblies, swashplates, yoke assemblies, and pitch horns. Installation instructions and part numbers are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Page 1 of 2

    R44 SERVICE LETTER SL-37A


    (supersedes R44 SL-37)

    DATE: 18 June 2010 REV A: 10 September 2014

    TO: R44 & R44 II Owners, Operators, and Maintenance Personnel

    SUBJECT: C016-7 Main Rotor Blade Requirements

    BACKGROUND: RHC has developed a new main rotor blade, p/n C016-7, which
    incorporates an aluminum skin for better dent protection and corrosion resistance at
    the blade tip. The C016-7 blade is part of the C005-12 blade & spindle assembly, and
    a matched pair may be installed on any fuel-injected R44 II. Installing matched C016-7
    blades on carbureted R44 helicopters, however, requires verifying certain components
    are installed or retrofitted.

    COMPLIANCE PROCEDURE:

    Refer to R44 Illustrated Parts Catalog Figure 67-61 dated JAN 2014. Prior to installing
    p/n C016-7 main rotor blades on a carbureted R44, verify the helicopter has:

    1. hydraulic flight controls. R44s with manual flight controls (electric-trim) must be
    upgraded to hydraulic controls; contact RHC Technical Support for details.

    2. C792-4 dual tachometer (101-102% engine rpm green arc; or C792-4R overhaul
    exchange).

    3. C006-5, -6, -7, or -8 main rotor gearbox (or C006-6R overhaul exchange), or C006-
    3 or -4 main rotor gearbox with B900-5 or -9 modification (if modified, a separate
    B900-5 or -9 data plate will be adjacent to the C006 data plate).

    4. lower C204-2 arm (steel, 2.52 inches long), connecting gearbox mast to lower fork
    assy with NAS1305-31 or NAS6605-31 bolts.

    5. lower A205-7 fork assy (3.70 inches center-to-center), attached to non-rotating


    swashplate.

    6. C017-6 swashplate or C017-4 swashplate (or C017-6R overhaul exchange).

    7. upper A205-7 fork assy (3.85 inches center-to-center), attached to rotating


    swashplate.

    (OVER)
    R44 SL-37A
    Page 2 of 2

    8. upper C204-3 arm (steel, 2.87 inches long), connecting upper fork assy to main-
    rotor-shaft yoke assemblies with NAS1305-31 or NAS6605-31 bolts.

    9. two C203-5 yoke assemblies, on C251-2 main rotor shaft.

    10. two C157-3 pitch horns, 16-hole flange (included with C005-12 blade & spindle
    assemblies or C005-12R overhaul exchange).

    COST:

    For replacement C005-12 blade & spindle assemblies, see R44 Service Letter SL-49.

    For replacement of all other parts or components please refer to www.robinsonheli.


    com, under the Customer Support tab, for current prices.

    You might also like