Manual

www.coredar.com
 In the Box  Tech Specs

• GLAMOS 1set • Model name : GLAMOS PRO

• USB C TYPE Charge Cable • Bluetooth version : 4.2
• User's Guide • Input voltage : 5V 1A
• Battery capacity : 700mah
• Usable time : 2 hours

 Design

① ②

③ ④ ⑤

① Staus display LED

② Power LED
③ Power Button (ON / OFF)
④ Bluetooth Button/ Calibration Button
⑤ USB-C TPYE connector
 To use

Power ON
• Press the Power Button for 3 seconds.
(When you push the Button, The WHITE LED turn on. And
GLAMOS is working, RGB LED turn on .
WHITE RED GREEN BLUE

3seconds

• When RGB LED is blinking, Please keep your hans off to the
GLAMOS and wait for 3 seconds, (During calibration, the LEDs
turns on and off as follows)
.
YELLOW CYAN MAGENTA

1m

GREEN
Power OFF
• Press the Power Button for 3 seconds
(Flashes green LED while pressing button)
 Status LED Info

RED

• Power On sensor error

• Bluetooth update mode

• Calibration - Bottom Right

GREEN

• When the power button is pressed to power off (Flashing)

• Calibration - Top Right

BLUE

• Sleep mode off (Flashing 3 times)

• Calibration – Top Left

WHITE

• When the power button is pressed to power off

• Calibration Mode on ( GLAMOS in Operation)

RED GREEN BLUE

• GLAMOS Power in test

• Bluetooth pairing mode

YELLOW CYAN MAGENTA

• GLAMOS get ready

 Function

Bluetooth pairing Mode

• Automatically enters pairing mode on initial operation.
• If the connection is lost, pressing the Bluetooth button for 1 second
will make the RGB LED to flash quickly and enter pairing mode.
android

IOS
 Function

Calibration Mode
• Press the Bluetooth button for more than 2 seconds to enter the Calibration
Mode. Touch the 3 corners of the screen you are using to measure the
distance.

* Sequence : Left Top -> Right Top -> Right Bottom

* Keep touching until the calibration is completed

① start-> finished ② start -> finished ③start -> finished

BLUE LED off GREEN LED off RED LED off

① ②

GLAMOS
 Function

Sleep Mode
• It enters sleep mode when there is no touch for 10 minutes.
Wake up Mode
• Cover the GLAMOS, After a while, the blue LED will flash 3 times and
start operation..

GLAMOS Firmware Update Mode

• If GLAMOS is operating, turn off the GLAMOS.
• hold the Bluetooth button while pressing the power button to enter update
mode.
• Hold the power Button.
BLE Firmware Update Mode
• Trun on the GLAMOS
• Press the Bluetooth button, power button at that same time.
 How to Firmware Update (BLE Device)
Android OS

1. Install "CySmart” application in GooglePlay.

2. Download a Firmware file at Coredar homepage (www.coredar.com)

Ex) GLAMOS_BLE_Firmware_v3.0.cyacd

3. Connect your phone and PC.

This PC\”Your Device Name\Phone\CySmart
Copy the file to folder above
(Filename extension is CYACD)

4. Turn on the GLAMOS and press two button

to enter Bluetooth Update Mode
The Red LED lights up until the update is complete. Power
Button BLE
Button

* Bluetooth mode is disabled during update execution

Do not turn off the product or press any other buttons during the update.

* If the product does not work due to an update error, press the power
button for 3 seconds to force shutdown.
5. After entering Bluetooth update mode, run the CySmart application on
your phone.
 How to Firmware Update(BLE Device)

6. In the App, select “GLAMOS-OTA-Bootloader”.

7. Select the “Bootloader” icon.

8. Under “Select Upgrade Option”, select “Application Upgrade”.

9. In Select Firmware Upgrade files, select the

GLAMOS_BLE_Firmware_v3.0.cyacd file and press the UPGRADE
button at the bottom.

10. When finished, close the CySmart App.

11. Shut down and restart GLAMOS.

 How to Firmware Update(BLE Device)
Select GLAMOS-OTA-Bootloader Select Bootloader Service Select Application Upgrade

Select the file and click UPGRADE UPGRADE proceed

 How to Firmware Update(BLE Device)
IOS

1. Install "CySmart” application in Appstore.

2. Download a Firmware file at Coredar homepage (www.coredar.com)

Ex) GLAMOS_BLE_Firmware_v3.0.cyacd

3. Connect your phone and PC.

Run iTunes.
Click iPhone icon( ).

click
 How to Firmware Update(BLE Device)
4. Settings → File Sharing → Apps → CySmart

5. Drag and copy the downloaded firmware file into CySmart Documents.
Ex) GLAMOS_BLE_Firmware_v3.0.cyacd

Drag file
 How to Firmware Update (BLE Device)

6. Turn on the GLAMOS and press two button

to enter Bluetooth Update Mode
The red LED lights up until the update is complete

* Bluetooth mode is disabled during update execution

Do not turn off the product or press any other buttons Power
during the update Button BLE
* If the product does not work due to an update error, Button
press the power button for 3 seconds to force shutdown.

1. After entering Bluetooth update mode, run the CySmart application on

your phone.

6. In the App, select “GLAMOS-OTA-Bootloader”.

7. Select the “Bootloader” icon.

8. Under “Select Upgrade Option”, select “Application Upgrade”.

9. In Select Firmware Upgrade files, select the

GLAMOS_BLE_Firmware_v3.0.cyacd file and press the UPGRADE
button at the bottom.

10. When finished, close the CySmart App.

11. Shut down and restart GLAMOS.

 How to Firmware Update (BLE Device)

Select GLAMOS-OTA-Bootloader Select Pair Select Bootloader Service

Select Application Upgrade Select the file and click UPGRADE UPGRADE proceed
 How To Update (GLAMOS Device)

FIRMWARE UPDATE
• You can update the firmware using the DfuSe Demo
program. Without turning on GLAMOS product,
press the Bluetooth button and the power button to
enter GLAMOS firmware mode.
Power
• If it cannot enter, the white light will illuminate. Button BLE
Button

* After entering DFU Mode, keep the power button

pressed to maintain DFU Mode.(To be updated later)

DFU connection fail DFU connection success

If the DFU connection fails, no information is When the DFU connection is successful, the
displayed. device information appears as shown in the box.
 file selection Upgrade Progress

Download the firmware to update from our If you succeed in importing a file, the phrase
homepage. "File correctly loaded" appears at the bottom of
Choose within the box shown (choose...)Press the program.
the button to select the downloaded file. Press the Upgrade button when the phrase is
File name Ex) confirmed.
GLAMOS_DFU_Firmware_v3.0.dfu
Upgrade Progress Upload complete

A warning window may appear as above. If the upload is successful, you can verify the
Press the Yes (Y) button to proceed with the update. following statement: "Target 00: Upgrade
successful!"
 Warning

• High reflectivity mirrors and metal products can malfunction when used as
recognition objects. We recommend using non-metallic objects whenever
possible.

• The battery usage time is 2 hours. Low battery capacity may cause
malfunction or product power loss. It is recommended to charge the USB-C
cable when using it for a long time.
product warranty