MA1903-EA © 2019 CASIO COMPUTER CO., LTD.

Operation Guide 5619

x Be sure to keep all user documentation handy for future reference. Crown Operations Crown
x Your watch may differ somewhat from the one shown in the illustration. Some water-resistant models (100 meters, 200 meters) have a
screw-in crown. When you need to perform a crown operation,
rotate it towards you to unscrew it. Then pull the crown out.
Stopwatch Second Hand Minute Hand Avoid applying undue force when pulling. The watch loses its
water resistance while the crown is unscrewed. After performing
a crown operation, fully screw the crown back in.

Click 2 Loosen

Hour Hand Click 1 If your watch has a rotary bezel...

Start
You can rotate the bezel to align its ▼ mark with the
minute hand. Then you will be able to tell how much
Second Hand
30 time has elapsed since aligning the ▼ mark.
Crown
Elapsed time

Current

Stopwatch Minute Hand Day Indicator

Using the Stopwatch
The stopwatch measures elapsed time in 1-second increments up to 29 minutes,
59 seconds.
Stopwatch functions
Elapsed time
A A A A B
To adjust the time setting Start Stop Resume Stop Reset
Note Split time
When the second hand is at 12 o’clock, pull
the Crown out to Click 2. x Take care that you set the
correct AM or PM time. A B B A B
x When changing the time, Start Split Split release Stop Reset
move the minute hand
four or five minutes past
Rotate the Crown to change the time setting. your final setting, and then Important!
back it up to the setting x Do not operate the stopwatch with the crown pulled out.
you want.
Note
Push the Crown back in on a time signal to x An elapsed time operation will stop automatically at the end of 30 minutes.
resume timekeeping.

Correcting the 0 Positions of the Hands

To change the day indicator setting Perform the following procedure if the stopwatch hands do not return to their 0 (zero)
Note positions when you reset the stopwatch.
Pull the Crown out to Click 1.
x The day indicator setting
uses a 31-day month. Pull the Crown out to Click 2.
Make adjustments for
months of shorter lengths.
Rotate the Crown away from you to set the x Avoid changing the day
day. indicator setting between
Use A to align the Stopwatch Second Hand with 12 o’clock, and B to align
the hours of 9:00 p.m.
and 1:00 a.m. Otherwise, the Stopwatch Minute Hand with 12 o’clock.
the day indicator may
Push the Crown back in. not change correctly at
midnight.
After all of the hands are the way you want, push the Crown back in.

Important!
Low Battery Alert x Timekeeping stops while the crown is pulled out. Correct the current time setting
after performing the above operation.
x The second hand will jump at two-second intervals to alert you when the charge is low.
x Have the battery replaced as soon as possible after low battery alert is indicated.
x Stopwatch operation is disabled during low battery alert.
x If low battery alert occurs during a stopwatch operation, the stopwatch will
automatically reset to all zeros and stop. Specifications
Battery life
Accuracy at normal
Module No. Battery type (30 minutes stopwatch
temperature (per month) operation per day)

5619 ±20 seconds SR927SW Approx. 5 years

Stopwatch: Measuring Capacity: 29'59" (30 minutes)

Measuring Unit: 1 second
Measurements: Elapsed time; split time
Other: Low battery alert

Specifications are subject to change without notice.