Scribd Logo
Upload

Welcome to Scribd!

  • 74 views

    MtS-2625R1-OVERHEAD CRANES METHOD STATEMENT COMMENTS

    Uploaded by

    Anonymous yniiLti
    This document provides a method statement for installing and testing overhead cranes. It outlines 14 steps for the process, including: [1] providing details of the girder bridge, end trucks, dimensions, and weights; [2] detailing how to shift components inside the building; [3] providing an assembly location sketch; [4] outlining the assembly and installation sequence; [5] confirming runway beam length; [6] indicating total runway beam length and stopper details; [7] providing an assembly sequence sketch; [8] detailing rail and runway beam joining; [9] providing bolt details; [10] specifying anchor embedment and hole sizes; [11] outlining load, travel, and movement tests;

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    MtS-2625R1-OVERHEAD CRANES METHOD STATEMENT COMMENTS

    Uploaded by

    Anonymous yniiLti
    74 views1 page
    This document provides a method statement for installing and testing overhead cranes. It outlines 14 steps for the process, including: [1] providing details of the girder bridge, end trucks, dimensions, and weights; [2] detailing how to shift components inside the building; [3] providing an assembly location sketch; [4] outlining the assembly and installation sequence; [5] confirming runway beam length; [6] indicating total runway beam length and stopper details; [7] providing an assembly sequence sketch; [8] detailing rail and runway beam joining; [9] providing bolt details; [10] specifying anchor embedment and hole sizes; [11] outlining load, travel, and movement tests;

    Original Title

    MtS-2625R1-OVERHEAD CRANES METHOD STATEMENT COMMENTS.xlsx

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a method statement for installing and testing overhead cranes. It outlines 14 steps for the process, including: [1] providing details of the girder bridge, end trucks, dimensions, and weights; [2] detailing how to shift components inside the building; [3] providing an assembly location sketch; [4] outlining the assembly and installation sequence; [5] confirming runway beam length; [6] indicating total runway beam length and stopper details; [7] providing an assembly sequence sketch; [8] detailing rail and runway beam joining; [9] providing bolt details; [10] specifying anchor embedment and hole sizes; [11] outlining load, travel, and movement tests;

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    74 views1 page

    MtS-2625R1-OVERHEAD CRANES METHOD STATEMENT COMMENTS

    Uploaded by

    Anonymous yniiLti
    This document provides a method statement for installing and testing overhead cranes. It outlines 14 steps for the process, including: [1] providing details of the girder bridge, end trucks, dimensions, and weights; [2] detailing how to shift components inside the building; [3] providing an assembly location sketch; [4] outlining the assembly and installation sequence; [5] confirming runway beam length; [6] indicating total runway beam length and stopper details; [7] providing an assembly sequence sketch; [8] detailing rail and runway beam joining; [9] providing bolt details; [10] specifying anchor embedment and hole sizes; [11] outlining load, travel, and movement tests;

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 1

    METHOD STATEMENT FOR INSTALLATIONN AND TESTING OF OVERHEAD CRANES

    DS # 002625R1 (KH/MST/M/027 )

    Provide details for the girder bridge and end trucks - their individual and assembled dimensions
    1
    and weights.

    Provide details of shifting the girder bridge and the runway beams inside the building. List out
    2 the preparations required outside the building and the machinery that would be used for their
    shifting and lifting inside the buildings.

    With chillers already located in their final position in B04 the space available inside the
    building for assembling and maneuvering the individual part and the assembly is limited
    therefore provide a sketch of the floor with chillers marked in their positions indicating the
    3
    location of assembling the unit and the movement of overhead crane components and the
    machinery required for lifting and mounting the assembled unit and the runway beams on to the
    corbels above.

    Provide assembly and installation sequence of bridge girder, end trucks, hoist and trolley
    raceway, runway, rails, conductor system, festoon cable and other components required to make
    4
    the crane assembly fully assembled and operational as per the specifications and other project
    documents.

    Confirm the length of the runway beams on both sides allows the girder bridge travel covering
    5
    the entire floor area of the equipment room.

    Indicate in the drawings the total length of the runway beam and in case where the length of the
    6 runway beam stops short of reaching the last corbel provide sectional details of installation of
    the stopper. (See comments on the Drawing inside.)

    Provide assembly sequence of the runway beam and indicate the sequence on a sketch of the
    7
    floor plans.

    8 Provide details of jointing the flat rail to the runway beam.

    9 Provide details of the bolts to be used on gusset plates on the runway beams.

    Embedment length and hole size required for the chemical anchors shall be as per the chemical
    10
    anchor manufacturer recommendations only.
    Provide details of load test, trolley travel and girder bridge travel tests as per project
    11
    specifications.
    All comments noted on the overhead cranes approved Material Submittals and Material
    12
    Receiving approvals through MIRs 685R2 and 744R1 shall be complied with

    13 All comments noted on the Rev-00 of this Method Statement shall be complied with.

    List out the statutory requirements if any of the civil defence and other relevant governing
    14
    bodies that shall be fulfilled prior to or post installation of the overhead cranes.

    Page 1 of 1

    You might also like