US - 25-33H-Series PRC - R1.indd

25H-33H PAPER ROLL CLAMP
Superior Arm and Pad Profile

Designed to Eliminate Damage
Ultra thin profile are Dual spring pad alignment Excellent visibility through Integrated pad protectors Heavy duty rotator
and pads system and around clamp drivetrain
APPLICATIONS OPTIONS
The H-Series Roll Clamp was designed with a thinner pad ■ Industry's widest offering of contact pads.
profile to eliminate damage while knifing in between rolls in containers, ■ Adaptive Force Control (AFC).
trailers and rail cars. Excellent visibility through the arms and frame
allow for maximum productivity and reduced damage. ■ Full height contact pads (non-split).
■ 180º Stop Group.
FEATURES ■ Hydraulic Force Control (HFC).
■ Split arm or solid arm.
■ Ultra thin profile pads.
■ Pad alignment system utilizing dual spring technology holds the contact
pads in proper alignment.
■ Excellent visibility through arms.
■ Fast arm speed.
■ Pad protectors.
■ Fixed or positionable short arm.
■ Short arm positioning to optimize small roll handling.
■ 360º or 180º rotation.
■ Heavy-duty rotator drivetrain proven to provide superior durability.
25H PAPER ROLL CLAMP
Fixed Frame Solid Arm Split Arm Swing Frame

C C
E
E
B 39.5" 7.9"
32.1" 18.8" 32.1"
A
VCG 15.8"
ET .6" Pad to
9.5" Ground Gap
HCG
D D
360° Rotation
Horizontal Ctr.
Mtg. Angle ➂
Load Center
Vertical Ctr.
Capacity@
Roll Range
Mtg. Class
Thickness
Thickness
Short Arm
of Gravity
of Gravity
Long Arm
Long Arm
Order No.
Effective
Catalog
Weight
Length
Length
lbs@in kg@mm A-B lbs kg ET HCG VCG C D E
Fixed Frame/Po
Frame/Positioned Short Arm/Solid Long Arm
25H-RCP-B001 5,[email protected]" 2,500@650 8"-51" III 0° 1,562 710 7.7" 10.5" 16.9" 35.7" 22.6" 1.7"
Fixed Frame/Positioned Short Arm/Split Long Arm
25H-RDP-B001 5,[email protected]" 2,500@650 8"-51" III 0° 1,535 698 7.7" 10.2" 16.9" 35.7" 22.6" 1.7"
Swing Frame/Positioned
Frame/P Short Arm/Solid Long Arm
25H-RCS-B001 5,[email protected]" 2,500@650 8"-51" III 0° 1,786 812 7.9" 10.4" 16.8" 35.7" 22.6" 1.7"
Swing Frame/Positioned
Frame/P Short Arm/Split Long Arm
25H-RDS-B001 5,[email protected]" 2,500@650 8"-51" III 0° 1,754 797 7.9" 10.1" 16.8" 35.7" 22.6" 1.7"
0º mounting provides the driver with a vertical reference to aid Swing frame clamps require a Solenoid Adaption Group and
in aligning pads to roll i.e. the pads are at the same angle as 3-function hosing over the mast.
the mast. 0º mounting must be used when stacking above 220".
2˚ mounting available. Consult Cascade.
2º mounting provides ease in handling rolls in the horizontal
(bilge) position.
ROTATOR SPECIFICATIONS HYDRAULIC FUNCTIONS

Min. Truck Torque Hydraulic Truck Auxiliary
Model Carriage Width RPM Flow gpm in-lbs @2300 psi Model Functions Valves Required
25H/30H/33H 32" 7.0 15 gpm 63,000 Fixed & Positioned Short Arm 2 2
Optional motors providing faster rotation are available. Reduced torque will result. Swing Frame 3 2
HYDRAULIC FLOW & PRESSURE (gpm)

Rotate Rotate
Max. Pressure Number of Function 1 gpm Function 1 gpm
Model Min. Pressure psi psi/bar Functions Min-Rec-Max Min-Rec-Max
25H/30H/33H 500 2,300/160 2 5 10 15 5 10 15
Fixed Frame Solid Arm Split Arm Swing Frame

C C
E
E
B 39.5" 7.9"
32.1" 18.8" 32.1"
A
VCG 15.8"
ET .6" Pad to
9.5" Ground Gap
HCG
D D
360° Rotation D
Horizontal Ctr.
Mtg. Angle ➂
Load Center
Vertical Ctr.
Capacity@
Roll Range
Mtg. Class
Thickness
Thickness
Short Arm
of Gravity
of Gravity
Long Arm
Long Arm
Order No.
Effective
Catalog
Weight
Length
Length
Fixed Frame/Positioned Short Arm/Solid Long Arm
Swing Frame/Positioned Short Arm/Solid Long Arm
30H-RCS-B007 5,[email protected]" 8"-63" 2,450@800 III 0º 1,938 880 8.1" 11.9" 17.0" 43.2" 32.9" 1.9"
30H-RCS-B008 4,[email protected]" 8"-72" 2,150@915 III 0º 2,082 946 8.1" 12.8" 17.0" 45.4" 33.3" 1.7"
Swing Frame/Positioned Short Arm/Split Long Arm
30H-RDS-B007 5,[email protected]" 2,450@800 8"-63" III 0º 1,924 874 8.1" 11.7" 17.0" 43.2" 32.9" 1.9"
30H-RDS-B008 4,[email protected]" 2,150@915 8"-72" III 0º 2,068 939 8.1" 12.2" 17.0" 45.4" 33.3" 1.7"
Swing frame clamps require a Solenoid Adaption Group and For Class IV mounting use 33H model, consult Cascade.
3-function hosing over the mast.
Split contact pad available at no additional cost,
2˚ mounting available. Consult Cascade. consult Cascade.
0º mounting provides driver with a vertical reference to aid in
aligning pads to roll i.e. the pads are at the same angle as the
mast. 0º mounting must be used when stacking above 220".
(bilge) position.
Horizontal Ctr.
Mtg. Angle
Load Center
Vertical Ctr.
Capacity@
Roll Range
Mtg. Class
Thickness
Thickness
Short Arm
of Gravity
of Gravity
Long Arm
Long Arm
Order No.
Effective
Catalog
Weight
Length
Length
Fixed Frame/Positioned Short Arm/Solid Long Arm
33H-RCP-B003 7,[email protected]" 3,300@700 8"-55" III 0° 1,714 779 8.2" 11.2" 16.9" 37" 24.6" 1.7"
33H-RCP-C001 7,[email protected]" 3,500@650 8"-51" IV 0° 1,807 822 10.0" 11.1" 16.3" 35.7" 22.6" 1.7"
33H-RDP-B001 7,[email protected]" III 3,500@650 8"-51" 0° 1,646 748 8.2" 9.9" 16.9" 35.7" 22.6" 1.7"
33H-RDP-C001 7,[email protected]" IV 3,500@650 8"-51" 0° 1,780 809 10.0" 10.8" 16.3" 35.7" 22.6" 1.7"
Swing Frame/Positioned Short Arm/Solid Long Arm
33H-RCS-C001 7,[email protected]" 3,500@650 8"-51" IV 0° 2,012 915 10.1" 11.8" 16.3" 35.7" 22.6" 1.7"
33H-RCS-C008 5,[email protected]" 2,500@915 8"-72" IV 0° 2,284 1,038 10.1" 13.8" 16.5" 45.4" 33.3" 1.7"
Swing Frame/Positioned Short Arm/Split Long Arm
33H-RDS-B005 6,[email protected]” 3,000@762 8"-60" III 0° 1,936 880 8.3" 11.5" 16.8" 39.6" 27.4" 1.7"
33H-RDS-B008 5,[email protected]” 2,500@915 8"-72" III 0° 2,135 971 8.3" 12.7" 17.0" 45.4" 33.3" 1.7"
33H-RDS-C001 7,[email protected]" 3,500@650 8"-51" IV 0° 1,979 900 10.1" 11.4" 16.3" 35.7" 22.6" 1.7"
33H-RDS-C008 5,[email protected]" 2,500@915 8"-72" IV 0° 2,268 1,031 10.1" 13.6" 16.5" 45.4" 33.3" 1.7"
Swing frame clamps require a Solenoid Adaption 0º mounting provides the driver with a vertical reference to aid
Group and 3-function hosing over the mast. in aligning pads to roll i.e. the pads are at the same angle as
2˚ mounting available, consult Cascade. the mast. 0º mounting must be used when stacking above 220".
(bilge) position.
Cascade Corporation • PO Box 20187 • Portland, OR 97294-0187 • USA • 800 CASCADE (227.2233) • Tel 503.669.6257 • Fax 800.693.3768 • Fax 503.669.6367
Cascade Canada Ltd. • 5570 Timberlea Blvd. • Mississauga, Ontario L4W 4M6 • Canada • 800.380.2272 • Tel 905.629.7777 • Fax 905.629.7785
Cascade is a registered trademark of Cascade Corporation.

© Cascade Corporation 2015. All rights reserved. www.cascorp.com Form 6076192R1_US 04/15

US - 25-33H-Series PRC - R1.indd

Uploaded by

Copyright:

Available Formats

US - 25-33H-Series PRC - R1.indd

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

US - 25-33H-Series PRC - R1.indd

Uploaded by

Copyright:

Available Formats

25H-33H PAPER ROLL CLAMP

Superior Arm and Pad Profile

Fixed Frame Solid Arm Split Arm Swing Frame

ROTATOR SPECIFICATIONS HYDRAULIC FUNCTIONS

HYDRAULIC FLOW & PRESSURE (gpm)

Fixed Frame Solid Arm Split Arm Swing Frame

Cascade is a registered trademark of Cascade Corporation.

You might also like