Scribd
Upload
102 views4 pages

AS101 en

The AS101 oscilloscope is designed to replace analog oscilloscopes. It has a 10 MHz bandwidth and 100 MS/s sample rate. The oscilloscope has a simple control panel similar to analog oscilloscopes and can capture waveforms at a rate of 130,000 wfms/s. It has a 3.7" colored LCD display and compact case. The oscilloscope also has triggers, a 1 MΩ input impedance, and comes with accessories like a power cord, manual, and probe.

Uploaded by

Nguyen Vu Hoang Thach
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
102 views4 pages

AS101 en

The AS101 oscilloscope is designed to replace analog oscilloscopes. It has a 10 MHz bandwidth and 100 MS/s sample rate. The oscilloscope has a simple control panel similar to analog oscilloscopes and can capture waveforms at a rate of 130,000 wfms/s. It has a 3.7" colored LCD display and compact case. The oscilloscope also has triggers, a 1 MΩ input impedance, and comes with accessories like a power cord, manual, and probe.

Uploaded by

Nguyen Vu Hoang Thach
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

…...………………..

……………………………………………………………………………………………………………………………………………

AS101 Oscilloscope
The best choice to replace an analogue oscilloscope
+ The simple control panel is similar to an analogue oscilloscope
+ Bandwidth : 10MHz，Sample rate : 100MS/s
+ 1-Channel
+ 130,000 wfms/s waveform capture rate, easily capturing
exceptional and low probability events
+ 3.7" Colored LCD
+ Compact case

＋Performance Specifications
Model AS101
Bandwidth DC:0~10MHz, AC: 10 Hz~10MHz
Channel 1
Sample Rate 100MS/s
Interpolation (Sinx)/x
Scanning speed
Horizontal system 0.05us/DIV ~ 0.1s/DIV,step by 1 – 2 - 5
(S/DIV)
relay time accuracy ±100 ppm
Trimming Ratio ≧2.5:1
Sensitivity 5 mV/DIV～10 V/DIV
Displacement ±10DIV
Analog bandwidth 10 MHz
Low Frequency ≥10 Hz (at input, AC coupling, -3 dB)
Vertical system
Rise time (at input, ≤ 30 ns
Typical)

Trimming Ratio ≧2.5:1

Input coupling DC, AC , Ground


Input impedance 1 MΩ±2%, in parallel with 20 pF±5 pF
Max. input voltage 400V (DC+AC, PK - PK)
X-Y Model
Sensitivity X:0.5V/DIV Y:0.1V/DIV ~ 1V/DIV
Bandwidth(-3dB) DC: 0 ~ 1MHz AC: 10Hz ~ 1MHz
Trigger
Trigger level range ±4 DIV from the screen center
Trigger level Accuracy (typical) ±0.3 DIV
Trigger Sources Int, Line, Ext

…...………………..……………………………………………………………………………………………………………………………………………
Fujian Lilliput Optoelectronics Technology Co., Ltd

Web: www.owon.com.cn / www.owontme.com E-mail: [email protected] Facebook: fb.me/owontech


…...………………..……………………………………………………………………………………………………………………………………………
Trigger Mode Norm, AUTO, TV
Edge trigger Rising, Falling
Video Trigger Support standard NTSC, PAL and SECAM broadcast systems
Sample Rate / Relay Time ±100ppm
Trigger lock support
Ext. Trigger Input Impedance 1 MΩ±2%, in parallel with 20 pF±5 pF
Ext. Trigger Max. Input Voltage 400Vpp
Trigger Output of the probe
compensator
Output Voltage (Typical) Square, 0.5Vpp±2%
Frequency (Typical) Square wave of 1 kHz(±1%)
Display 3.7" Colored LCD (Liquid Crystal Display)
Power Supply 100V - 240V AC, 50/60Hz, CAT II

Power Consumption ＜15W

Fuse 1A, T class, 250V


Dimension (W x H x D) 117 x 192 x 288 mm
Device Weight About 1.8 kg
Specifications subject to change without prior notice.

＋Application
electronic circuit debugging circuit testing design and manufacture
education and training automobile maintenance and testing

＋Accessories The accessories subject to final delivery.

Power Cord Manual Probe Probe Adjust

…...………………..……………………………………………………………………………………………………………………………………………
Fujian Lilliput Optoelectronics Technology Co., Ltd

Web: www.owon.com.cn / www.owontme.com E-mail: [email protected] Facebook: fb.me/owontech


…...………………..……………………………………………………………………………………………………………………………………………

2. 运行、停止键用来做什么？

旋钮 3 做什么用？

旋钮 5 调整触发电平？可触发电平符号在哪里？屏幕上没有

锁定触发按键：当按下锁定按钮时，无论信号幅度如何，触发电平都自动保持在最佳值。

自动/一般/视频 三种触发模式选择

外部触发/X 轴输入（李沙瑜实验）

触发源选择：内部/交流源/外部源

…...………………..……………………………………………………………………………………………………………………………………………
Fujian Lilliput Optoelectronics Technology Co., Ltd

Web: www.owon.com.cn / www.owontme.com E-mail: [email protected] Facebook: fb.me/owontech


…...………………..……………………………………………………………………………………………………………………………………………

耦合模式选择：直流/交流/接地

…...………………..……………………………………………………………………………………………………………………………………………
Fujian Lilliput Optoelectronics Technology Co., Ltd

Web: www.owon.com.cn / www.owontme.com E-mail: [email protected] Facebook: fb.me/owontech

You might also like