Ref: MME/ENC/20017/20-21 Date: 11.10.2020: Kind Attn: Mr. Abdus Salam, AE

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Ref: MME/ENC/20017/20-21 Date: 11.10.

2020

To
Head of the Purchase Dept.
ENC
Army Headquarter
Dhaka, Bangladesh

Kind Attn: Mr. Abdus Salam, AE

Sub: Price Quotation for Load Cell with complete calibration set of UTM & CTM

Dear Sir,

This has reference to our discussion regarding above. We are now pleased to give below our offers Load
Cell with complete calibration set of our Principle: Controls, Italy as per your requirement.

We hope and trust that our offer should meet your requirement. If you need any information in this
matter, please feel free to contact us.

Thanking you and assuring you of our best attention and services always.

Sincerely Yours

Md. Masuduzzaman
QUOTATION
Quotation No: MME/ENC/20017/20-21 MME Contact: Engr. Md. Masuduzzaman
Dated: 11/10/2020 Mobile : +88 01722 688866
ENC Phone : +88 02-51040227
Army Headquarter Email : [email protected]
Dhaka, Bangladesh Prepared By: Engr. Md. Masuduzzaman
Mobile: 01769-012890
Email: [email protected]

S/N Item Qty Unit Price Total Price


BDT BDT
01 UTM or CTM calibration unit (DIgital) 01 Set 10,75,000.00 10,75,000.00

Brand: Controls
COO: Italy

Included Items:

 82-P0801/E Digimax Plus tester for force


verification. 230V, 50-60Hz, 1ph.
 82-P0172/M 24 columns serial printer. 110-
230V/50-60Hz/1ph
 82-P0172/1 Serial cable for printer connection.
 82-P0804/E4 Force calibration verification MS
Excel Spread sheet.
 82-Q0800/3 Serial cable RS232 and RS232-
USB adapter for PC connection
 82-E0100/200 Load cell 2000 kN class 1 to EN
ISO 376. Supplied complete with carrying
case. Calibration certificate to be ordered
separately when purchased with digital readout
unit
 82-E0100/ACC4 Official ACCREDIA (EAL)
calibration certificate for the load cell
connected to suitable digital tester for force
verification. Calibration to EN, ISO 376, 10
points, 4 cycles. (increasing forces only).
Suitable for load cells from >1000 to 5000 kN.

Subtotal 10,75,000.00
VAT 5% 53,750.00
G. Total 11,28,750.00
In word: BDT Eleven Lac Twenty Eight Thousand Seven Hundred Fifty Only
Terms and Conditions:
01. Price Validity : 30 days
02. The Price is including VAT & IT
03. Payment terms: 100% Advance along with work order;
04. Lead Time: 8-12 Weeks from the date of Work Order along with advance payment
05. Included: Customs Duty and other foreign costs outside Bangladesh.
06. Warranty: 1 Year Limited Warranty. Warranty will be provided only for manufacturing defects. It
will not cover any consumables
07. Warranty will be void for the following reasons: Physical damage/ Broken/ Burnt cases/
Oxidation/ Time expiration/ Unauthorized maintenance/ Trying to open internal parts
08. Installation and training shall be done by M M ENGINEERING authorized Engineer.

Sincerely Yours

Md. Masuduzzaman

You might also like