Scribd
Upload
217 views1 page

Insulation CM-IWN.1 For Unearthed DC and Mixed AC/DC V AC and V DC

Uploaded by

El Haj Benazzouz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
217 views1 page

Insulation CM-IWN.1 For Unearthed DC and Mixed AC/DC V AC and V DC

Uploaded by

El Haj Benazzouz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Data sheet

Insulation monitoring relay CM-IWN.1


For unearthed AC, DC and mixed AC/DC systems up to
Un = 400 V AC and 600 V DC

The CM-IWN.1 serves to monitor insulation resistance in


accordance with IEC 61557-8 in unearthed IT AC systems, IT AC
systems with galvanically connected DC circuits, or unearthed IT
DC systems with a voltage up to 400 V AC and 600 V DC. The
measuring range can be extended up to 690 V AC and 1000 V DC St
by using the coupling unit CM-IVN. It can be configured to
the requirements of the applications and therefore used multi¬
functional.
I K
'
5
Characteristics v
»•
- For monitoring the insulation resistance of unearthed IT systems up
Si HI
to Un = 400 V AC and 600 V DC
- According to IEC/EN 61557-8 “Electrical safety in low voltage
distribution systems up to 1 000 V a.c. and 1 500 V d.c. -
s
•
Equipment for testing, measuring or monitoring of protective
measures - Part 8: Insulation monitoring devices for IT systems"
- Rated control supply voltage 24-240 V AC/DC Approvals
- Prognostic measuring principle with superimposed square wave
UL 508, CAN/CSA C22.2 No.14
signal
- Two measuring ranges 1-100 kQ and 2-200 kQ
© GL
- One (1x2 c/o) or two (2 x 1 c/o) threshold values Ran1/R1 1> (final 9S. IEC/EN 60947-5-1, CB scheme
switch-off) and Ran2/R21> (prewarning) configurable2) ® GB1 4048.5 - 2001 , CCC
- Precise adjustment of the threshold values in 1 kQ steps (R1) and
© GOST
2 kQ steps (R2)
- Interrupted wire detection configurable
- Non-volatile fault storage configurable
- Open- or closed-circuit principle configurable Marks
- 45 mm (1.77 in) width C€ CE
- 3 LEDs for status indication C C-Tick
1> term acc. to IEC/EN 61557-8
2> R2 only active with 2 x 1 c/o configuration

Order data
Insulation monitoring relay
Type Nominal voltage U„of the distribution system to I Rated control supply System leakage Order code
be monitored voltage capacitance, max.
CM-IWN.1 0-400 V AC / 0-600 V DC 24-240 V AC/DC 20 pF 1SVR 650 660 R0200

Accessories
Type Description Order code
CM-IVN Coupling unit for connection of the CM-IWN.1 to systems with voltages Un up to 690 V AC and 1000 V DC 1SVR 650 669 R9400
ADR 02 Adapter for screw mounting 1 SVR 440 029 R0100
MAR.02 Marker label for devices with DIP switches 1 SVR 430 043 R0000
COV.02 Sealable transparent cover 1SVR 440 005 R0100

Power and productivity


__ __II
A II __
for a better world™ m m IPIV

You might also like