MKT 078 04 AG ST Bioactive Surface Treatment

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

BIOACTIVE

SURFACE
TREATMENT
MULTI-PURPOSE. UP TO 12 MONTHS PROTECTION

LONG TERM
SURFACE HYGIENE PRODUCT OVERVIEW
Treating surfaces and
REDUCES TIME & AerisGuard™ Bioactive Surface Treatment systems with Bioactive
Surface Treatment
is used for treating walls, floors, ceilings and
LABOUR THROUGH surfaces including in air-handling systems and ensures:

LESS FREQUENT cold storage rooms, to prevent the growth of


bacteria and mould for up to 12 months. i
Improved surface
hygiene
CLEANING When inadequately maintained, these surfaces Prolonged asset
Over time hard surfaces and equipment life
become colonised with bacteria and mould.
including those in HVAC&R AerisGuard™ Bioactive Surface Treatment is a Prevention of
residual treatment that ensures bacterial and regrowth
systems become dirty from of mould and odour
fungal regrowth is greatly reduced following
the build-up of dirt, dust, mechanical and general cleaning. It can be causing bacteria
pollen, moisture and other applied with a damp mop or wiped onto all Improved air quality
surfaces physically accessible. It can be fogged and efficiency in
contaminants. The prevention
through the system to ensure total coverage. air handling &
of mould, and bacteria refrigeration systems
regrowth on all surfaces, Ideal as part of an annual maintenance
program, applied after cleaning with
leads to improved hygiene
AerisGuard™ Surface Cleaner and Sanitiser.
maintained over
a 12 month period. i

For best practice and


optimal results - pair
Get the Aeris
with Surface Cleaner
& Sanitiser as part of
Advantage!
a two step clean/treat
process UP TO 12 MONTHS
PROTECTION
Surface Cleaner & Sanitiser HIGHLY EFFECTIVE

Bioactive Surface Treatment

PRODUCT NOTES
i. HVAC HESS Fact sheet published https://
MKT-078-04

www.energy.gov.au/sites/default/files/hvac-
factsheet-cleaning-coils.pdf
ii. Refer to SDS-007 AerisGUARD™ Surface
Treatment Aerosol
iii. Refer to SDS-006 AerisGUARD™ Surface
Treatment
BIOACTIVE
SURFACE
TREATMENT
MULTI-PURPOSE. UP TO 12 MONTHS PROTECTION

FEATURES BENEFITS
• Biostatic coating provides up to 12 • Improves air quality in refrigerated systems
months’ protection to control and
prevent mould and odour causing • Reduces maintenance
bacteria
• Extends equipment life
• Remains inert on surfaces until activated • Improves system hygiene
by moisture
• Minimises corrosion
• Application is fast, efficient and easy
• Controls build-up of contamination for up to
• Specifically designed for use on all 12 months
general surfaces within air-conditioning
systems, including high velocity systems • Ease of application including direct spray,
with no off gassing cold fogging and surface wiping

• Used on all surfaces including seals

PREPARATION
Product Code Description Dilution Rate
AG-ST-A Bioactive Surface Treatment Aerosol 400g Ready to Use

AG-ST-5 Bioactive Surface Treament 5L Ready to Use

AG-ST-20 Bioactive Surface Treatment 20L Ready to Use

Product Code Application Rate

AG-ST-A 60ml per m2 / Refer to SDSii

AG-ST-5 60ml per m2 / Refer to SDSiii

AG-ST-20 60ml per m2 / Refer to SDSiii


MKT-078-04

AERIS ENVIRONMENTAL LTD.


5/24-36 Dunning Ave, Rosebery NSW, 2018
[email protected]
aeris.com.au

You might also like