Scribd Logo
Upload

Welcome to Scribd!

  • 34 views

    Model Direct-Acting, Pressure Reducing/relieving Valve With Drain To Port 4

    Uploaded by

    mhasansharifi
    This document provides information about a direct-acting, pressure reducing/relieving valve that reduces a high primary pressure at the inlet to a constant reduced pressure at the outlet port. It includes details such as factory pressure settings, maximum operating pressure, adjustment details, seal kit options, and configuration options for the control, adjustment range, seal material, and material/coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Model Direct-Acting, Pressure Reducing/relieving Valve With Drain To Port 4

    Uploaded by

    mhasansharifi
    34 views1 page
    This document provides information about a direct-acting, pressure reducing/relieving valve that reduces a high primary pressure at the inlet to a constant reduced pressure at the outlet port. It includes details such as factory pressure settings, maximum operating pressure, adjustment details, seal kit options, and configuration options for the control, adjustment range, seal material, and material/coating.

    Original Title

    PSDB_en_us_letter

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about a direct-acting, pressure reducing/relieving valve that reduces a high primary pressure at the inlet to a constant reduced pressure at the outlet port. It includes details such as factory pressure settings, maximum operating pressure, adjustment details, seal kit options, and configuration options for the control, adjustment range, seal material, and material/coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    34 views1 page

    Model Direct-Acting, Pressure Reducing/relieving Valve With Drain To Port 4

    Uploaded by

    mhasansharifi
    This document provides information about a direct-acting, pressure reducing/relieving valve that reduces a high primary pressure at the inlet to a constant reduced pressure at the outlet port. It includes details such as factory pressure settings, maximum operating pressure, adjustment details, seal kit options, and configuration options for the control, adjustment range, seal material, and material/coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    MODEL Direct-acting, pressure reducing/relieving valve with drain to port 4

    PSDB SERIES 1 / CAPACITY: 10 gpm / CAVITY: T-21A

    snhy.com/PSDB

    Direct-acting, pressure reducing/relieving valves reduce a high primary pressure at the inlet (port 2) to a constant
    reduced pressure at port 1, with a full-flow relief function from port 1 to tank (port 3). Draining port 4 makes the
    valve insensitive to pressure at port 3. These valves incorporate a damped construction for stable operation
    allowing the use of high reduced pressure.

    TECHNICAL DATA NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.

    Factory Pressure Settings Established at 0.25 gpm


    Maximum Operating Pressure 5000 psi
    Maximum Valve Leakage at 110 SUS (24 cSt) 2 in³/min.@1000 psi
    Adjustment - No. of CW Turns from Min. to Max. setting 5
    Locknut Hex Size 9/16 in.
    Locknut Torque 80 - 90 lbf in.
    Seal kit - Cartridge Buna: 990021007
    Seal kit - Cartridge Polyurethane: 990021002
    Seal kit - Cartridge Viton: 990021006

    NOTES For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.

    CONFIGURATION OPTIONS Model Code Example: PSDBLAN


    CONTROL (L) ADJUSTMENT RANGE (A) SEAL MATERIAL (N) MATERIAL/COATING
    L Standard Screw Adjustment A 500 - 3000 psi (35 - 210 bar), 700 psi N Buna-N Standard Material/Coating
    C Tamper Resistant - Factory Set (50 bar) Standard Setting V Viton /LH Mild Steel, Zinc-Nickel
    K Handknob B 50 - 1500 psi (3,5 - 105 bar), 200 psi
    O Handknob with Panel Mount (14 bar) Standard Setting
    D 25 - 800 psi (1,7 - 55 bar), 200 psi (14
    bar) Standard Setting
    E 25 - 400 psi (1,7 - 28 bar), 200 psi (14
    bar) Standard Setting
    S 25 - 200 psi (1,7 - 14 bar), 100 psi (7
    bar) Standard Setting
    W 750 - 4500 psi (50 - 315 bar), 1000 psi
    (70 bar) Standard Setting

    c 2019 Sun Hydraulics


    1 of 1

    You might also like