Scribd
Upload
190 views6 pages

Quiz 6

Sri Ramakrishna Institute of Technology, Coimbatore-10 provides a Mechatronics quiz with 15 multiple choice questions covering topics related to computer numerical control (CNC), computer integrated manufacturing (CIM), digital manufacturing, computer-aided design (CAD), programmable logic controller (PLC), computer-aided process planning (CAPP), and lights-out manufacturing. The document is a practice quiz from the Department of Mechanical Engineering to test knowledge of these mechanical engineering and manufacturing related concepts.

Uploaded by

Veerakumar S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
190 views6 pages

Quiz 6

Sri Ramakrishna Institute of Technology, Coimbatore-10 provides a Mechatronics quiz with 15 multiple choice questions covering topics related to computer numerical control (CNC), computer integrated manufacturing (CIM), digital manufacturing, computer-aided design (CAD), programmable logic controller (PLC), computer-aided process planning (CAPP), and lights-out manufacturing. The document is a practice quiz from the Department of Mechanical Engineering to test knowledge of these mechanical engineering and manufacturing related concepts.

Uploaded by

Veerakumar S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Sri Ramakrishna Institute of Technology, Coimbatore-10

(An Autonomous Institution)


(Approved by AICTE, Affiliated to Anna University)
Accredited by NAAC with ‘A’ Grade
Department of Mechanical Engineering
(Accredited by NBA)

MECHATRONICS
QUIZ-6

1. Which does CNC stand for with respect to machine related manufacturing?
a) Computer Numb control
b) Computer Number control
c) Computer Numerical control
d) Computerised Numerical controller
View Answer

Answer: c
Explanation: CNC with respect to machine related manufacturing stands for Computer
Numerical control. It can control machines such as milling machine, lathe, welding machine
etc by taking digital data as its input which is fed into it by the operator.

2. Which is a false statement on CIM (Computer integrated manufacturing)?


a) Quality of the final goods produced is better
b) The cost of production is less
c) Quantity of produced goods can be changed easily
d) The cost of initial setup is less
View Answer

Answer: d
Explanation: “The cost of initial setup is less” is a false statement on CIM (Computer
integrated manufacturing). The labour cost may be less but the cost of setup and its installation
is high compared to the traditional ones, because the setup consists of costly and advanced
machines.

3. When did the ‘digital manufacturing’ concept became prominent?


a) Early 1950’s
b) Early 1970’s
c) Late 1940’s
d) Late 1960’s
View Answer

Answer: b
Explanation: The concept of ‘digital manufacturing’ became prominent in the early 1970’s. It

Page 1
became famous after the release of the book “Computer Integrated Manufacturing” written by
Dr. Joseph harrington.

4. What is the full form of CAD?


a) Computer aided Design
b) Computer arts Design
c) Computer arts Designing
d) Computer assisted Design
View Answer

Answer: a
Explanation: CAD stands for Computer aided Design. CAD software is used to digitally
design a model. They can create 3-Dimensional model of any desired object. Software such as
“Ansys” can even determine stress or strain falling on an object.

5. CIM (Computer integrated manufacturing) system is same as “lights-out factory”.


a) True
b) False
View Answer

Answer: b
Explanation: CIM(Computer integrated manufacturing) system is not same as “lights-out
factory”. In “lights-out factory” there is no requirement of a single human being. Everything is
done by the robots. But this is not so in the CIM (Computer integrated manufacturing). Here
skilled technicians are needed for the manufacturing.

6. “Lights-out factory” is a factory where there is no need any kind of light source.
a) True
b) False
View Answer

Answer: a
Explanation: “Lights-out factory” is a factory where there is no need any kind of light source.
It is also known as “Dark factory”. Every work inside the factory is automated and is carried
out by programmed robots.

7. Which does DNC stand for with respect to machine related manufacturing?
a) Direct Numb control
b) Direct Number control
c) Direct Numerical control
d) Directed Numerical controller
View Answer

Page 2
Answer: c
Explanation: DNC with respect to machine related manufacturing stands for Direct Numerical
control. It is also called as distributed numerical control. In this machines are controlled by a
programmed computer with the help of direct connections.

8. Which does PLC stand for with respect to machine related manufacturing?
a) Programmed Logic Controller
b) Programmable Logic Controller
c) Programmed Logic Control
d) Programmable Low-key Controller
View Answer

Answer: b
Explanation: PLC with respect to machine related manufacturing stands for Programmable
Logic Controller. It is used in the control of manufacturing process. It can control the assembly
lines, carrier robots etc. It provides ease in programming and in the diagnosis of any fault.

9. What is the full form of CAPP?


a) Computer aided processed plans
b) Computer arts process planning
c) Computer aided process planning
d) Computer assisted process planning
View Answer

Answer: c
Explanation: CAPP stands for Computer aided process planning. It is the use of computer
aided technology to plan or design a product for manufacturing. This process is widely used in
CIM (Computer integrated manufacturing) for the planning purpose.

10. Which is an example of PLC (Programmable Logic Controller)?


a) MSP430G2ET
b) CMCP793V-500
c) SR3B261BD
d) BMP180
View Answer

Answer: c
Explanation: SR3B261BD is an example of PLC (Programmable Logic Controller) developed
by SCHNEIDER Electric. BMP180 is a pressure sensor. MSP430G2ET is a development
board manufactured by the “TEXAS INSTRUMENTS” and CMCP793V-500 is a velocity
sensor.

11. Which software cannot be used for 3D modelling and CAD (Computer aided design)?
a) Creo

Page 3
b) Ansys
c) Blender
d) Adobe premium pro
View Answer

Answer: d
Explanation: Adobe premium pro software cannot be used for 3D modelling and CAD
(Computer aided design). Creo, Ansys and Blender all three are 3D modeling app which can
also be used for CAD (Computer aided design).

12. CIM (Computer integrated manufacturing) implies that there should be at least two
computers between which information is interchanged.
a) True
b) False
View Answer

Answer: a
Explanation: CIM (Computer integrated manufacturing) implies that there should be at least
two computers between which information is interchanged. There can be more than two
systems which works together and exchange information.

13. Who coined the term CAE (Computer aided engineering)?


a) Jerome H. Lemelson
b) Jason Lemon
c) Charles manes
d) Samuel Hunter Christie
View Answer

Answer: a
Explanation: Jason Lemon first coined the term CAE (Computer aided engineering). He was
the founder of SDRC (Structural Dynamics Research corporation). It was founded in the year
1967.

14. Stress analysis can be performed using “ansys” CAD (Computer aided design) software.
a) True
b) False
View Answer

Answer: a
Explanation: Stress analysis can be performed using “ansys” CAD (Computer aided design)
software. Ansys is a 3D modelling CAD (Computer aided design) software through which we
can easily figure out the stress in any part of the object.

Page 4
15. When was the first attempt of lights-out manufacturing made?
a) 1950
b) 1970
c) 1784
d) 1860
View Answer

Answer: c
Explanation: The first attempt of lights-out manufacturing made in the year 1784. It was
carried out by “Oliver Hans”. He was the one who created the world’s first continuous
production line in the year 1784.

Page 5

You might also like