Scribd
Upload
34 views1 page

Steel Design: Project Job Number Engineer

This document contains an analysis of the forces and stresses on steel frame section TS6X3X1/4 located at frame 252 and location 4.453 m. It finds the section satisfies all design checks under the governing AISC-LRFD99 code and load combination COMB4. Demand to capacity ratios are below the limit of 0.950 for axial force, major moment, and minor moment. Shear stresses are below capacity in both the major and minor axes. The section is determined to be adequate for this location and loading.

Uploaded by

Jay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views1 page

Steel Design: Project Job Number Engineer

This document contains an analysis of the forces and stresses on steel frame section TS6X3X1/4 located at frame 252 and location 4.453 m. It finds the section satisfies all design checks under the governing AISC-LRFD99 code and load combination COMB4. Demand to capacity ratios are below the limit of 0.950 for axial force, major moment, and minor moment. Shear stresses are below capacity in both the major and minor axes. The section is determined to be adequate for this location and loading.

Uploaded by

Jay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SAP2000 Steel Design Project

Job Number
Engineer

AISC-LRFD99 STEEL SECTION CHECK


Combo : COMB4
Units : KN, m, C

Frame : 252 Design Sect: TS6X3X1/4


X Mid : 8.250 Design Type: Brace
Y Mid : 5.060 Frame Type : Ordinary Moment Frame
Z Mid : 1.035 Sect Class : Compact
Length : 10.183 Major Axis : 0.000 degrees counterclockwise from local 3
Loc : 4.453 RLLF : 1.000

Area : 0.003 SMajor : 9.778E-05 rMajor : 0.053 AVMajor: 0.002


IMajor : 7.451E-06 SMinor : 6.555E-05 rMinor : 0.031 AVMinor: 9.677E-04
IMinor : 2.497E-06 ZMajor : 1.249E-04 E : 199947978.80
Ixy : 0.000 ZMinor : 7.653E-05 Fy : 248211.284

STRESS CHECK FORCES & MOMENTS


Location Pu Mu33 Mu22 Vu2 Vu3 Tu
4.453 -3.211 -19.241 -0.089 22.789 0.020 0.000

PMM DEMAND/CAPACITY RATIO


Governing Total P MMajor MMinor Ratio Status
Equation Ratio Ratio Ratio Ratio Limit Check
(H1-1b) 0.704 = 0.009 + 0.690 + 0.005 0.950 OK

AXIAL FORCE DESIGN


Pu phi*Pnc phi*Pnt
Force Capacity Capacity
Axial -3.211 185.267 589.461

MOMENT DESIGN
Mu phi*Mn Cm B1 B2 K L Cb
Moment Capacity Factor Factor Factor Factor Factor Factor
Major Moment -19.241 27.895 0.850 1.000 1.000 1.000 0.437 1.558
Minor Moment -0.089 17.096 0.850 1.000 1.000 1.000 0.437

SHEAR DESIGN
Vu phi*Vn Stress Status Tu
Force Capacity Ratio Check Torsion
Major Shear 22.789 259.420 0.088 OK 0.000
Minor Shear 0.020 129.710 0.000 OK 0.000

SAP2000 v15.2.1 - File:D:\jaydelacrux\Documents\1. ON GOING 2020\1 Story with Basement\3. Structural\5. Roof\Roof
November
Base
15,
Model
20184\Roof
0:00 Base Model

You might also like