0% found this document useful (0 votes)
2K views2 pages

Ruff N Tuff

Texture

Uploaded by

Omkar Borde
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
0% found this document useful (0 votes)
2K views2 pages

Ruff N Tuff

Texture

Uploaded by

Omkar Borde
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 2
Cea SCRATCH , Product Description: 4 Ruff Tutf-Scratchisa popular & preferred trowel applied synthetic grooved finish Texture. The | prothct formulated with modified acryc emulsion and reinforced with quarts aggregates to j ‘withstand humidity rain and variable climates. Used for decoration andlong term protection. tis highly recommended for freshly plastered surfaces and also ideal for reviving old weather beaten. surfaces Ruff‘n’Tuff- Scratch isnow offered in different variants based on the groove patter: ' + Fine (0.8 to 1 mm) + Regular (1.2 to 1.5 mm) «Standard (2 to 2.5 mm) «High Build (3 mm +) recommended for very smooth Surfaces recommended for smooth Surfaces recommended for Medium Rough Surfaces + recommended for Rough Surfaces Recommended Usage Area: Cement Plaster, concrete, bricks, masonry, wood, gypsum board and lime- cement plaster. ForExterioruse. BY BS uy GN BACNET EB { t Ee EDTA ‘ 4 Colour: off White + Gloss Level: Matt when released NF i ‘Drying Time (at 25 + 2°C, Relative Humiity 60%) *Pot Life of Thinned Material:2-3hours |.) ‘Touch dry (hrs. % hr = Density: 195 +0.5, + Dry to recoat: 12 ~ 26hrs. + + Voc: Less than 50 gm/itr 1 | (Drying time may vary as per temperature, EERE FE RR REE ™ ae Theoretical Coverage* Fine (1 mm)~3.5~ 4.5 Sq.ft /Kg/Coat [ Regular(1.Smm)-2.5~ 3.059 Ft/kg/Coat % ¢ Standard (2mm)-2.0~2.5Sq Ft /kg/Coat P High Build (Bmm)-1.6~2.05q.Ft,/kg/Coat | sitsependson many factors ite surfoce condo, surface roughness & pore surface preparation eppleation | © suilwteotnerconatons, tonet The coverage menoned unser idealcondlonsanduilvarydependngan i thes condtion.itsrecommendeatoestblsh coverage onecua te ‘Surface Inspection ~ Before painting the exterior walls, undertake repairs of all surface imperfections cracks, leakages, undulationsand rustcaused by drainage pipes. _ + Scraping & Cleaning ~ Remove all loose paint, dirt, fungus, algae, mass and salt deposits |» ter ©) alternatively by wire brushing the surface. On the fungus affected areas, apply 1 or 2coats of |) s % Berger Paint Bio-Wash solution (5% v/v) by brush. Allow it to dry overnight. Wash it again next 3 g S. daywith potable water thoroughiy. Wash the scraped surface thoroughly and allow tt dry. 3 2 Berger Recommended Tools ~ Express Painting Sander with Paint Seraper attachment end 4 & | Express Painting Jet Washer. Crack Bridging —For filing cracks up to 5 mm use Home Shield Crack Fill Paste. For wider cracks ry filmis non-toxle uuse Home Shield Advance Latex Plusas per the product usage guidelines. ‘and Lead free «+ Waterproofing ~ If required apply Home Shield Latex Shield 2K on the affected areas as per the | product usage guidelines. For highly affected areas Home Shield Dampstop coating system Is recommended, APPLICATION DATA Application Thinning Thinner/ Overcoating time Method, Recommended Cleaner (at 252°C) Este \ 3 Sit = © @ ‘6 months in Bag in original { Senled pack trom the date ‘offmanuractre Dilute approx CS 3% if required, for better consistency ecu) + Weaterost YURI RE BY APRS : Exterior Primer, ¥ SNE ¥ . 2, ime AR mt ON AS BUR Seal-0- \ Acribond Primer 9 > Directions for use | Primer Application — Normally primer is not recommended on new surfaces. However in case of aoe +. chalky substrate or repainting, it is recommended to apply one coat of Weathercoat Exterior Le 4. Primer/Seal-O-Prime /AcribondPrimer. wut’ Tutt Texture Application — Apply one coat of Ruf 'w’Tuff- Scratch with trowel and allow it to dry { pa for 16-18 hrs ‘ | « Recommended Tool: Stee! & Plastic Trowel. ‘ m4 * Thinning: If required, use 3-59 of fresh water for better consistency. s Weathercoat | TePCoat-Apply 2 coats of Borger Weathercoat (Longlf,Allguard,Antidust, Smooth)/ Outsmart aS Ulongitfe, | /Outshine xterior Emulsion with recommended cilution ratio as finishingcoat. mut Allguard, Es 8 Antidust, \ ‘Smooth)/ ) > Outsmart/ Se] uw OO Sekt) & Precautions) : ))® Priortouse, read and follow product specification, MSDS and label information. [LEE EL | + stirthe contents thoroughly before dilution avoidetra thinning, over extend the ler /orush pore * Donot apply when temperature is below 10°C, humidity above 90%. Shipping i * Ensure that existing paints property bonded and, not peeling oft Information Skea peeing + Avoid contact with eyesandskin, + Usessaety equipments lie rubber or polythene gloves, safety goaele /lasses and face mask, a + Keep awayfromehilren. (| + Stir/ MicWellbefore use Freight Clasfieation + Moisture content of the wallshould be ideally below 12% Paint + value ofthe wallsurface should beideally between 7~ 11. | J claimer || Tretfrmaton andthe recommendatonssetforth inti TechicalOat Sheets rebased upon Bonk {._testaconductedby oronealfof Berger Prints Such formation and recommendations ast Acevionmabe | fothhereinae subject change without notice and pertain tothe productoferedat the time of Fasnfort-wate__ | publeaton. Consult your Serger Pats eperemate or the mos recent Techni! Data Nye HSN Code: 32091010, sheet. ae OBI ERY TRA IE IE FUN PR Fa oF : Version No.: BPTEX01/06/2018. Please note that this data sheet supersedes all previous versions Regd Office: BERGER PAINTS INDIA LTD, Berger House, 129 ark street, Kolkata, West Bengal Inia 700017» BERGER & °° srvsvertester tsar one 80010810 toni connaraenceteierintaom Lead content does not exceed 90 pats per milion Category : PANTS

You might also like