Scribd Logo
Upload

Welcome to Scribd!

  • 36 views

    Cpa5 LD PDF

    Uploaded by

    Narin Inverter
    This document provides specifications for the CPA5-LD low fouling spiral wound membrane element. Key details include: - The element is expected to produce 11,000 gallons per day of permeate flow at 99.7% salt rejection under test conditions. - It has a composite polyamide membrane with an active surface area of 400 square feet wound into a low fouling spiral configuration. - Operating limits include a maximum pressure of 600 psi and temperature of 113°F, with a pH range of 2-11 for continuous use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Cpa5 LD PDF

    Uploaded by

    Narin Inverter
    36 views1 page
    This document provides specifications for the CPA5-LD low fouling spiral wound membrane element. Key details include: - The element is expected to produce 11,000 gallons per day of permeate flow at 99.7% salt rejection under test conditions. - It has a composite polyamide membrane with an active surface area of 400 square feet wound into a low fouling spiral configuration. - Operating limits include a maximum pressure of 600 psi and temperature of 113°F, with a pH range of 2-11 for continuous use.

    Original Title

    CPA5-LD.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the CPA5-LD low fouling spiral wound membrane element. Key details include: - The element is expected to produce 11,000 gallons per day of permeate flow at 99.7% salt rejection under test conditions. - It has a composite polyamide membrane with an active surface area of 400 square feet wound into a low fouling spiral configuration. - Operating limits include a maximum pressure of 600 psi and temperature of 113°F, with a pH range of 2-11 for continuous use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    36 views1 page

    Cpa5 LD PDF

    Uploaded by

    Narin Inverter
    This document provides specifications for the CPA5-LD low fouling spiral wound membrane element. Key details include: - The element is expected to produce 11,000 gallons per day of permeate flow at 99.7% salt rejection under test conditions. - It has a composite polyamide membrane with an active surface area of 400 square feet wound into a low fouling spiral configuration. - Operating limits include a maximum pressure of 600 psi and temperature of 113°F, with a pH range of 2-11 for continuous use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Membrane Element CPA5-LD

    (Low Fouling Technology)


    3
    Performance: Permeate Flow: 11,000 gpd (41.6 m /d)
    Salt Rejection: 99.7% (99.6% minimum)

    Type Configuration: Low Fouling Spiral Wound


    Membrane Polymer: Composite Polyamide
    2 2
    Membrane Active Area: 400 ft (37.1m )
    Feed Spacer: 34 mil (0.864 mm)

    Application Data* Maximum Applied Pressure: 600 psig (4.14 MPa)


    Maximum Chlorine Concentration: < 0.1 PPM
    Maximum Operating Temperature: 113 °F (45 °C)
    pH Range, Continuous (Cleaning): 2-11 (1-13)*
    Maximum Feedwater Turbidity: 1.0 NTU
    Maximum Feedwater SDI (15 mins): 5.0
    3
    Maximum Feed Flow: 75 GPM (17.0 m /h)
    Minimum Ratio of Concentrate to
    Permeate Flow for any Element: 5:1
    Maximum Pressure Drop for Each Element: 15 psi

    * The limitations shown here are for general use. For specific projects, operating at more conservative values may
    ensure the best performance and longest life of the membrane. See Hydranautics Technical Bulletins for more detail
    on operation limits, cleaning pH, and cleaning temperatures.

    Test Conditions
    The stated performance is initial (data taken after 30 minutes of operation), based on the following conditions:

    1500 PPM NaCl solution


    225 psi (1.55 MPa) Applied Pressure
    77 °F (25 °C) Operating Temperature
    15% Permeate Recovery
    6.5 - 7.0 pH Range

    A
    C

    B FEED PERMEATE

    CONCENTRATE

    A, inches (mm) B, inches (mm) C, inches (mm) Weight, lbs. (kg)


    40.0 (1016) 7.89 (200) 1.125 (28.6) 33 (15)

    Notice: Permeate flow for individual elements may vary ±15 percent. Membrane active area may vary +/-4%. Element weight may vary. All membrane elements are
    supplied with a brine seal, interconnector, and o-rings. Elements are enclosed in a sealed polyethylene bag containing less than 1.0% sodium meta-bisulfite solution, and then
    packaged in a cardboard box.

    Hydranautics believes the information and data contained herein to be accurate and useful. The information and data are offered in good faith, but without guarantee, as
    conditions and methods of use of our products are beyond our control. Hydranautics assumes no liability for results obtained or damages incurred through the application of the
    presented information and data. It is the user's responsibility to determine the appropriateness of Hydranautics' products for the user's specific end uses. 3/17/16

    Hydranautics Corporate: 401 Jones Road, Oceanside, CA 92058


    1-800-CPA-PURE Phone: 760-901-2500 Fax: 760-901-2578 [email protected]

    You might also like