1 Which is not the “effect of accident on worker” ?

(a) Injury to body

(b) Production stoppage
(c) Loss of job
(d) Financial loss

2 If affected worker is recovered within 10 hours then which type of accident is it ?

(a) Minor
(b) Reportable
(c) Major
(d) Fatal

3 What happens in fatal accident?

(a) Hospitalization
(b) Fractures
(c) Disablement
(d) Death

4 Who can be responsible for accident?

(a) Worker
(b) Management
(c) Working conditions
(d) All the above

5 Who is responsible for "unguarded moving parts?

(a) Workers
(b) Management
(c) Government
(d) None

6 Which is not included in the causes of accidents due to 'Unsafe Working Conditions?
(a) Chemical leakages
(b) Suffocation at work
(c) Irregular floor height
(d) Quarrels of workers

7. Which is not included in the “causes of accidents” due to nature?

(a) Floods
(b) Gas leakage
(c) Heavy rains
(d) Temperature strokes

8 Who gets affected directly or indirectly due to accidents?

(a) Worker
(b) Industry
(c) Family of worker
(d) All
9 Accident is
(a) Unfortunate
(b) Mishappening
(c) Sudden
(d) All the above

10. Which is not included in the cause of accident due to worker?

(a) Lack of concentration
(b) Poor housekeeping
(c) Mischievous behavior
(d) Overconfidence

11. Which is not included in the cause of accident due to management?

(a) Bad habits of worker
(b) Untrained workers
(c) Bad construction of plant
(d) Faulty equipment

12 Injury after accident disables the affected worker forever is____________accident.

(a) Fatal
(b) Major
(c) Permanent
(d) None

13. Internal accident means__________.

(a) Accident in the premises of company
(b) Injury without showing external signs
(c) Both
(d) None

14 Which preventive measure industry should take to avoid accidents?

(a) Safety provisions
(b) Training for safe working
(c) Safety devices
(d) All the above

15 Examples of fire hazards are_____________.

(a) Smoking
(b) Overloading power sockets
(c) Faulty electrical equipment
(d) All the above

16. Faulty electrical equipment may cause

(a) Fire hazards
(b) Industrial accidents
(c) Loss of property
(d) All the above
17. Fire involving solid materials is of type_______.
(a) (A)
(b) (B)
(c) (C)
(d) (D)

18. Fire involving flammable liquids such as petrol diesel etc. is of type_________.
(a) (A)
(b) (B)
(c) (C)
(d) (D)

19. Fire involving gases is of type______.

(a) (A)
(b) (B)
(c) (E)
(d) (D)

20 Fire involving flammable metals is of type_____.

(a) (B)
(b) (C)
(c) (D)
(d) (E)

21. E type of fire is by__________.

(a) Solid materials
(b) Gases
(c) Electrical apparatus
(d) Metals

22 Don't leave temporary equipment plugging____when its_________use.

(a) in, not in
(b) off, in
(C) off, not in
(d) in, in

23. Fire drill is__________.

(a) Drilling in fire
(b) Fire near drill
(c) Demo of fire evacuation training
(d) None of the above

24. Whom to communicate before doing fire drill operation?

(a) Fire Marshall
(b) Fire Commander
(b) Fire Superintendent
(d) Fire Inspector
25 During fire drill______.
1 Communicate evacuation routes to people
2 Create an in house safety committee
(a) only 1 is correct
(b) only 2 is correct
(c) both are correct
(d) both are wrong

26 ___________ensures the safe evacuation of all individuals during fire drill.

(a) Fire Marshall
(b) Supervisor
(c) Fire Warden
(d) Fire Inspector

27 During fire drill_________.

1 Fire alarm system is not used
2 All individuals assembly at the master point
(a) only 1 is true
(b) only 2 is true
(c) both are true
(d) both are false

28 To give practice of evacuation in emergency__________is done

(a) Fire
(b) Fire drill
(c) Fire fight
(d) Fire awareness

29. Frequency of fire drill at fire prone places is__________.

(a) Once in a year
(b) Once in 6 months
(c) Once in 3 months
(d) Once in 2 months

30 Frequency of fire drill at non-fire prone places is

(a) Once in a year
(b) Once in 6 months
(c) Once in 3 months
(d) Once in 2 months

31______is a documented format that authorizes specified people to work under conditions.

(a) Work license

(b) Work permit
(c) Work authority
(d) Work order
32 In work, following facts are important
(a) Specific work
(b) Specified time
(c) Specific area
(d) All the above

33. Work permit sets out the_________ required to do work safely under______
(a) Risk, Permission
(b) Function, Labour law
(c) Process, Higher authority
(d) Precautions, Risk management

34 Work permits is_________

1 Formal recorded process
2. It is for authorized persons
3. There is no clear definition of responsibilities

(a) 1, 2 correct, 3 Incorrect

(b) 1, 2 incorrect, 3 correct
(c) 1 correct, 2, 3 incorrect
(d) 1 incorrect, 2,3 correct

35, Work permit is done at

1 High risk areas
2 Routine activities

(a) only 1 correct

(b) only 2 correct
(b) both correct
(d) both incorrect

36 Work permit is done at________.

(a) High voltage work
(b) Electrical trouble shooting
(c) Pressure testing
(d) All

37 When work permit is not required ?

(a) Complex machinery
(b) Emergency
(c) Work at height
(d) Operational pipelines
38_______is a person authorized by manager who will be responsible for keeping area and
stalf safes
(a) Issuer
(b) Field operator
(c) Responsible person
(d) Executor

39_______is a person who is trained, competent and authorized to issue permit.

(a) Responsible person
(b) Issuer
(c) Executor
(d) Field operator

40___________is a person who is trained, competent and authorized as per work permit
(a) Field operator
(b) Executor
(c) Issuer
(d) Responsible person

41__________is a person who is competent person and support the isolator at site and
signs the work permit.
(a) Executor
(b) Field operator
(c) Issuer
(d) Responsible person

42 Match the pairs

1 Cold work (A) Fire
2 Hot work (B) Hand tools
3 Confined space (C) Welding
4 Excavation (D) Pipelines
(a) 1 (B), 2. (C), 3. (D), 4 (A)
(b) 1 (D), 2. (C), 3. (B), 4 (A)
(c) 1.(A) 2. (B),3. (C),4 (D)
(d) 1 (C). 2. (B), 3. (A), 4. (D)

43 Match the pairs

1 Issue (A) Hand back of permit
2 Receipt (B) Pre Job check
3 Clearance (C) Remove isolation
4 Cancellation (D) Handover of permit
(a) 1 (D), 2. (C) 3. (B) 4 (A)
(b) 1 (D), 2. (B), 3. (C), 4 (A)
(c) 1 (A), 2. (B), 3. (C), 4. (D)
(d) 1 (B), 2. (D), 3. (A), 4. (C)
44 Safety management does not ensure_____________
(a) Safe workplace
(b) Time Management
(c) Standardization of operation
(d) Investigation of accident

45. Safety management brings__________ to safety operations.

(a) Repeatability
(b) Avoidance
(c) Control
(d) None

46. Safety management does not apply_______

(a) Standardization
(b) Ensures centralized compliances
(c) Do not use software
(d) Safety investigation process

47 Safety management software do not share data among_________.

(a) Medical staff
(b) Safety Professionals
(c) Customers
(d) Supervisors

48 1 Safety management is not helpful in corrective actions.

2 Safety management brings repeatability to safety operation.
(a) 1 is Correct
(b) 2 is Correct
(c) Both Correct
(d) Both Incorrect

49 Head protection does not help to safeguard_________.

(a) Burn hazards
(b) Impact hazards
(c) Gas fumes
(d) Penetration hazards

50 ___________is required when exposed to object falling from above.

(a) Head protection
(b) Eye protection
(c) Hearing protection
(d) Foot Operation

51 Face protection is not required in____________

(a) Flying particles
(b) Gas vapours
(c) Noise above 85 decibels
(d) Molten metal
52 For extended period we should not be exposed to noise above__________ decibles.

(a) 50
(b) 60
(c) 75
(d) 85

53 Protective clothings are not useful for__________.

(a) Open flames
(b) Falling object
(c) Low temperature
(d) Liquid chemicals

54. Protective clothing must be____________ when exposed to rotating equipment.

(a) Loose
(b) Tight
(c) Both
(d) None

55 Safe clothing includes

1 Shirts tucked in
2 Long sleeves buttoned
(a) Only 1 correct
(b) Only 2 correct
(c) Both correct
(d) Both incorrect

56. All equipments should be______to protect against accidental operation.

(a) Locked in
(b) Locked out
(c) Closed in
(d) Closed out

57. Using hand tools one must care____________.

(a) Work with safety guards
(b) Warning labels
(c) Shields
(d) All the above

58 While working on electrical equipment ensure that all metal hand tools are__________
(a) Insulated
(b) Folded
(C) Protected
(d) None of the above
59 Never use_______ to remove dust and debris from clothing.
(a) hand tools
(b) sticks
(c) clothes
(d) compressed air

60. While using gas cylinders, use only those cylinders that are approved by_________
(a) State transportation
(b) Interstate transportation
(c) District officials
(d) Gas agencies

61. When there is doubt about how to use the cylinder, the user shall contact________.
(a) Police
(b) Supplier
(c) Fire control
(d) None of the above

62. Regarding cylinders_________

1 Cylinders should be kept near elevators for easy transportation
2 Cylinders must be dragged, but not be rolled
(a) Only 1 correct
(b) Only 2 correct
(c) Both correct
(d) Both wrong

63 Match the pairs

1 Gloves (A) Falling objects
2 Hard hats (B) Hot sparks
3. Leather cap (C) Welding
4 Face protection (D) Molten metal

(a) 1. (A), 2. (B), 3. (C), 4 (D)

(b) 1. (B), 2. (C, 3.(D), 4. (A)
(c) 1 (C), 2. (A), 3. (B), 4 (D)
(d) 1 (D), 2. (B), 3. (C).4 (A)