Same-Band Combiner
880 – 890 / 925 – 935 MHz 902.5 – 915 / 947.5 – 960 MHz
GSM900 (10 MHz Bandwidth) GSM900 (12.5 MHz Bandwidth)
• Enables antenna and feeder sharing for two base
stations in the same frequency band
• Suitable for two operators with frequency allocations Port 3
within the same frequency band
Port 2
• Very low Tx/Rx insertion loss compared to standard
hybrid combiners Port 6
Port 4
• Double unit for XPol antennas
• Suitable for indoor or outdoor applications
• DC/AISG by-pass for DTMA supply Port 5
Port 1
Block Diagram
Tuning Diagram
Technical Data
Type No. 782 10936
Pass band
BTS 1 (GSM900 / Operator 1) Rx1/Rx2 = 880 – 890 MHz, Tx1/Tx2 = 925 – 935 MHz
BTS 2 (GSM900 / Operator 2) Rx3/Rx4 = 902.5 – 915 MHz, Tx3/Tx4 = 947.5 – 960 MHz
Insertion loss
Port 1 Port 3 / Port 4 Port 6 < 0.5 dB, typically 0.3 dB (880 – 890 MHz) / < 0.7 dB, typically 0.4 dB (925 – 935 MHz)
Port 2 Port 3 / Port 5 Port 6 < 0.7 dB, typically 0.5 dB (902.5 – 915 MHz) / < 0.5 dB, typically 0.3 dB (947.5 – 960 MHz)
Isolation
Port 1 Port 2 / Port 4 Port 5 > 30 dB (880 – 890 / 902.5 – 915 / 925 – 935 / 947.5 – 960 MHz)
VSWR < 1.2 (pass bands)
Impedance 50 Ω
Input power
Subject to alteration.
Tx1 / Tx2 / Tx3 / Tx4 < 100 W / < 100 W / < 100 W / < 100 W
Intermodulation products < –160 dBc (3rd order; with 2 x 20 W)
Temperature range –40 … +60 °C
Connectors 7-16 female (long neck)
Application Indoor or outdoor (IP66)
DC/AISG transparency
Port 1 Port 3 / Port 4 Port 6 Stop
936.4032
Port 2 Port 3 / Port 5 Port 6 By-pass (max. 2500 mA)
Lightning protection 3 kA, 10/350 μs pulse
Mounting Wall mounting: With 4 screws (max. 8 mm diameter) / Mast mounting: With additional clamp set
Weight 6.9 kg
Dimensions (w x h x d) 275 x 176 x 140 mm (without connectors, without mounting brackets)
www.kathrein.de 782 10936 Page 1 of 2
KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494
Same-Band Combiner
880 – 890 / 925 – 935 MHz 902.5 – 915 / 947.5 – 960 MHz
GSM900 (10 MHz Bandwidth) GSM900 (12.5 MHz Bandwidth)
Accessories (order separately) Typical Attenuation Curves
Clamp set BTS 1 (GSM900) BTS 2 (GSM900)
Type No. suitable for mast
Diagram I (Port 1 Port 3 / Port 4 Port 6) Diagram III (Port 2 Port 3 / Port 5 Port 6)
diameter of
734 360 34 – 60 mm
734 361 60 – 80 mm
734 362 80 – 100 mm
734 363 100 – 120 mm
734 364 120 – 140 mm
734 365 45 – 125 mm
Type No. Description
784 10367 50-Ohm load
Clamp Set 50-Ohm load
Diagram II (Port 1 Port 3 / Port 4 Port 6) Diagram IV (Port 2 Port 3 / Port 5 Port 6)
Please note:
As a result of more stringent legal regulations and judgements regarding
product liability, we are obliged to point out certain risks that may arise
when products are used under extraordinary operating conditions.
Extraordinary operating conditions, such as heavy icing or exceptional dynamic
stress (e.g. strain caused by oscillating support structures), may result in
Subject to alteration.
the breakage of a mast mounted device or even cause it to fall to the ground.
These facts must be considered during the site planning process.
The Same-band Combiner is designed to operate under the environmental
conditions as described in ETS 300 019-1-4 class 4.1 E and have passed
environmental tests as recommended in ETS 300 019-2-4.
The installation team must be properly qualified and also be familiar with
the relevant national safety regulations.
936.4032
The details given in our data sheets have to be followed carefully when
installing the combiners and accessories.
The limits for the coupling torque of RF connectors,
recommended by the connector manufacturers
must be obeyed.
Terminate unused inputs with a suitable 50-Ohm load,
e.g. 784 10367.
Any previous datasheet issues have now become
invalid.
Page 2 of 2 782 10936 www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494
