Scribd
Upload
221 views2 pages

PS-M12D06 (Dual Output 5 Watt) : Preliminary Information

This document provides specifications for a dual output 5 watt DC/AC inverter. The inverter is intended as an alternative backlight inverter and has PCB mounting pins. Key specifications include a minimum efficiency of 73%, operating temperature range of 0-70°C, input voltage range of 7-14VDC, and dual outputs of 5mA each to power two CCFL lamps. Pinouts and dimensions are provided.

Uploaded by

979104025
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
221 views2 pages

PS-M12D06 (Dual Output 5 Watt) : Preliminary Information

This document provides specifications for a dual output 5 watt DC/AC inverter. The inverter is intended as an alternative backlight inverter and has PCB mounting pins. Key specifications include a minimum efficiency of 73%, operating temperature range of 0-70°C, input voltage range of 7-14VDC, and dual outputs of 5mA each to power two CCFL lamps. Pinouts and dimensions are provided.

Uploaded by

979104025
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PRELIMINARY INFORMATION

PS-M12D06
(dual Output 5 Watt)

DESCRIPTION :
This DC/AC Inverter is developed as an alternative
Backlight Inverter to Endicot ERG.
The Inverter has PCB mounting pins.
During the Power-Fail-Mode the CCFL inverter can‘t be switched on.

Applicable LCD :
Displays: NEC NL6448AC20-18
Starting Voltage: min. 900 Vrms
Lamp Current: typ. 2x5 mArms (per lamp)
FEATURES :
Efficiency min. 73%
PCB mounting: Pin diameter 1,62 mm
Low noise: With voltage resonant circuit
Wide Input Voltage: 7…14 VDC, must be regulated
Robust construction: Heavy components are protected
TEMPERATURE & HUMDITY :
Operating Temperature Range 0°C… + 70°C
Storage Temperature Range -40 °C… + 85°C
Humidity 95 %RH max

Note: * This inverter is usable for this display but the output current is not correct. The life time for
the CCFL lamp is shorter.

Power Systems - The Power Solution


Web: http://www.Power-Systems.de Address: Dörnet 8; 74360 Ilsfeld / Germany
Email Europe: [email protected] Tel. Europe: + 49 / 7062 / 6759 - 6
Email UK: [email protected] Tel. UK: + 44 / 1234 / 215811
Fax: + 49 / 7062 / 6759 - 80

All specification are subject to change without notice Page ( 1 / 2 ) Version: 19th.May 2014
PRELIMINARY INFORMATION
PS-M12D06
(dual output 5 Watt)

Dimensions:

32.0
17.7
7.62 8
6.10
15.24
2
6 1
39.70

Bottom View

PCB mounting pins 0.64 square


All dimensions in mm
3 5 4
10.16

20.23
5.60

Pinning: Ratings:

Pin Designation Table Rating MinimumTypical Maximum Units


Pin Function Operating Temperature Range 0 25 70 Deg.
Number Storage Temperature range -40 25 85 Deg.
1 Input Positive Input Voltage Range 7 12 14 VDC
2 Input Negative Input Current 500 mA DC
3 Output Common Operating Frequency 27 32 37 kHz
4 Output 1 Lamp Starting Voltage at 0C 1500 Vrms
5 Output 2 Lamp Voltage 700 Vrms
6 NC Efficiency 81 %
Output Current (each lamp) 4 5 6 mArms
Dimming Duty Cycle 10:1 1:1 Ratio
Duty Cycle Input Voltage Range - - - VDC
Duty Cycle Frequency - - - Hz

Power Systems - The Power Solution


Web: http://www.Power-Systems.de Address: Dörnet 8; 74360 Ilsfeld / Germany
Email Europe: [email protected] Tel. Europe: + 49 / 7062 / 6759 - 6
Email UK: [email protected] Tel. UK: + 44 / 1234 / 215811
Fax: + 49 / 7062 / 6759 - 80

All specification are subject to change without notice Page ( 2 / 2 ) Version: 19th.May 2014

You might also like