Global LCD Panel Exchange Center www.panelook.

com

PRODUCT SPECIFICATION

□Tentative Specification
□ Preliminary Specification
■ Approval Specification

MODEL NO.: V390HJ1

SUFFIX: LE6
ƵƐƚŽŵĞƌ͗ 

WWZKsz      ^/'EdhZ


EĂŵĞͬdŝƚůĞ                                
EŽƚĞ


WůĞĂƐĞƌĞƚƵƌŶϭĐŽƉLJĨŽƌLJŽƵƌĐŽŶĨŝƌŵĂƚŝŽŶǁŝƚŚLJŽƵƌƐŝŐŶĂƚƵƌĞĂŶĚ
ĐŽŵŵĞŶƚƐ͘

Approved By Checked By Prepared By

Chao-Chun Chung Vita Wu Alan Hung

sĞƌƐŝŽŶϮ͘Ϭ                                         ϭ                                     ĂƚĞΚ
ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

CONTENTS

1. GENERAL DESCRIPTION ............................................................................................................................................5

1.1 OVERVIEW.........................................................................................................................................................5
1.2 FEATURES .........................................................................................................................................................5
1.3 APPLICATION.....................................................................................................................................................5
1.4 GENERAL SPECIFICATIONS ............................................................................................................................5
1.5 MECHANICAL SPECIFICATIONS......................................................................................................................6

2. ABSOLUTE MAXIMUM RATINGS ................................................................................................................................7

2.1 ABSOLUTE RATINGS OF ENVIRONMENT ......................................................................................................7
2.2 PACKAGE STORAGE ........................................................................................................................................8
2.3 ELECTRICAL ABSOLUTE RATINGS .................................................................................................................8
2.3.1 TFT LCD MODULE ....................................................................................................................................8
2.3.2 BACKLIGHT CONVERTER UNIT ..............................................................................................................8

3. ELECTRICAL CHARACTERISTICS .............................................................................................................................9

3.1 TFT LCD MODULE .............................................................................................................................................9
3.2 BACKLIGHT CONVERTER UNIT..................................................................................................................... 11
3.2.1 LED LIGHT BAR CHARACTERISTICS ................................................................................................... 11
3.2.2 CONVERTER CHARACTERISTICS........................................................................................................ 11
3.2.3 CONVERTER INTERFACE CHARACTERISTICS ..................................................................................12

4. BLOCK DIAGRAM OF INTERFACE ...........................................................................................................................14

4.1 TFT LCD MODULE ...........................................................................................................................................14

5. INTERFACE PIN CONNECTION ................................................................................................................................15

5.1 TFT LCD MODULE ...........................................................................................................................................15
5.2 CONVERTER UNIT ..........................................................................................................................................18
5.3 LVDS INTERFACE............................................................................................................................................20
5.4 COLOR DATA INPUT ASSIGNMENT...............................................................................................................22

6. INTERFACE TIMING ...................................................................................................................................................23

6.1 INPUT SIGNAL TIMING SPECIFICATIONS.....................................................................................................23
6.2 POWER ON/OFF SEQUENCE ........................................................................................................................26

7. OPTICAL CHARACTERISTICS ..................................................................................................................................27

7.1 TEST CONDITIONS .........................................................................................................................................27
7.2 OPTICAL SPECIFICATIONS ............................................................................................................................28

8. PRECAUTIONS...........................................................................................................................................................31
8.1 ASSEMBLY AND HANDLING PRECAUTIONS................................................................................................31
8.2 SAFETY PRECAUTIONS .................................................................................................................................31
sĞƌƐŝŽŶϮ͘Ϭ                                         Ϯ                                     ĂƚĞΚ
ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

9. DEFINITION OF LABELS............................................................................................................................................32
9.1 CMI MODULE LABEL.......................................................................................................................................32

10. PACKAGING..............................................................................................................................................................33
10.1 PACKAGING SPECIFICATIONS ....................................................................................................................33
10.2 PACKAGING METHOD ..................................................................................................................................33

11. MECHANICAL CHARACTERISTIC...........................................................................................................................35

sĞƌƐŝŽŶϮ͘Ϭ                                         ϯ                                     ĂƚĞΚ
ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

REVISION HISTORY
Version Date Page(New) Section Description
Ver. 2.0 Oct. 02, 2012 All All Approval Specification was first issued.

sĞƌƐŝŽŶϮ͘Ϭ                                         ϰ                                     ĂƚĞΚ
ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

1. GENERAL DESCRIPTION
1.1 OVERVIEW
V390HJ1-LE6 is a 39” TFT Liquid Crystal Display module with LED Backlight unit and 2ch-LVDS interface. This
module supports 1920 x 1080 Full HDTV format and can display 16.7M colors (8-bit). The converter module for
backlight is built-in.
1.2 FEATURES
Ё High brightness (350 nits)
Ё High contrast ratio (3500:1)
Ё Fast response time (Gray to gray average 8.5 ms)
Ё High color saturation (NTSC 68%)
Ё Full HDTV (1920 x 1080 pixels) resolution, true HDTV format
Ё DE (Data Enable) only mode
Ё LVDS (Low Voltage Differential Signaling) interface
Ё Optimized response time for 50Hz/60Hz frame rate
Ё Ultra wide viewing angle : Super MVA technology
Ё Viewing Angle : 176(H)/176(V) (CR ≥ 20) VA Technology
Ё RoHs compliance
Ё T-con input frame rate: 50Hz/60Hz, output frame rate: 50Hz/60Hz
1.3 APPLICATION
Ё Standard Living Room TVs
Ё Public Display Application
Ё Home Theater Application
Ё MFM Application
1.4 GENERAL SPECIFICATIONS
Item Specification Unit Note

Active Area 853.92 (H) x480.33 (V) (39” diagonal) mm

(1)
Bezel Opening Area 861.32 (H) x485.63 (V) mm

Driver Element a-si TFT active matrix - -

Pixel Number 1920 x R.G.B. x 1080 pixel -

Pixel Pitch(Sub Pixel) 0.14825 (H) x 0.44475 (V) mm -

Pixel Arrangement RGB vertical stripe - -

Display Colors 16.7 M color

Display Operation Mode Transmissive mode / Normally Black - -

Anti-Glare coating (Haze 1%)
Surface Treatment - (2)
Hard Hardness (3H)
Rotation Function Unachievable (3)

Display Orientation Signal input with “CMI” (3)

sĞƌƐŝŽŶϮ͘Ϭ                                         ϱ                                     ĂƚĞΚ
ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Note (1) Please refer to the attached drawings in chapter 9 for more information about the front and back outlines.
Note (2) The spec. of the surface treatment is temporarily for this phase. CMI reserves the rights to change this feature.
Note (3)

Back Side Front Side

CMI
Tcon Board

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal (H) 872.32 873.32 874.32 mm (1)

Vertical (V) 500.63 501.63 502.63 mm (1)

Module Size
Depth (D) 17.4 18.4 19.4 mm (2)

Depth (D) 24.6 25.6 26.6 mm (3)

Weight 6764 7120 7476 g -

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) Module Depth is between bezel to T-CON cover.
Note (3) Module Depth is between bezel to Converter cover

sĞƌƐŝŽŶϮ͘Ϭ                                         ϲ                                     ĂƚĞΚ
ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Value
Item Symbol Unit Note
Min. Max.

Storage Temperature TST -20 +60 ºC (1)

Operating Ambient Temperature TOP 0 50 ºC (1), (2)

Shock (Non-Operating) SNOP - 50 G (3), (5)

Vibration (Non-Operating) VNOP - 1.0 G (4), (5)

Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta Љ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The maximum operating temperature is based on the test condition that the surface temperature of display area is
less than or equal to 65 ºC with LCD module alone in a temperature controlled chamber. Thermal management
should be considered in final product design to prevent the surface temperature of display area from being over 65 ºC.
The range of operating temperature may degrade in case of improper thermal management in final product design.
Note (3) 11 ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 200 Hz, 10 min, 1 time each X, Y, Z.
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that the module
would not be twisted or bent by the fixture.

sĞƌƐŝŽŶϮ͘Ϭ                                         ϳ                                     ĂƚĞΚ
ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

2.2 PACKAGE STORAGE

When storing modules as spares for a long time, the following precaution is necessary.
(a) Do not leave the module in high temperature, and high humidity for a long time, It is highly recommended to
store the module with temperature from 0 to 35 к at normal humidity without condensation.
(b) The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or fluorescent
light.

2.3 ELECTRICAL ABSOLUTE RATINGS

2.3.1 TFT LCD MODULE
Value
Item Symbol Unit Note
Min. Max.

Power Supply Voltage VCC -0.3 13.5 V

(1)
Logic Input Voltage VIN -0.3 3.6 V

2.3.2 BACKLIGHT CONVERTER UNIT

Value
Item Symbol Unit Note
Min. Max.

Light Bar Voltage VW Ё 60 VRMS

Converter Input Voltage VBL 0 30 V (1)

Control Signal Level Ё -0.3 6 V (1), (3)

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Functional operation should be
restricted to the conditions described under normal operating conditions.
Note (2) No moisture condensation or freezing.
Note (3) The control signals include On/Off Control and External PWM Control.

sĞƌƐŝŽŶϮ͘Ϭ                                         ϴ                                     ĂƚĞΚ
ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
(Ta = 25 ± 2 ºC)
Value
Parameter Symbol Unit Note
Min. Typ. Max.
Power Supply Voltage VCC 10.8 12 13.2 V (1)
Rush Current IRUSH Ё Ё 3.21 A (2)
White Pattern PT Ё 4.2 5.04 W
Power consumption Black Pattern PT Ё 4.1 4.8 W (3)
Horizontal Stripe PT Ё 6.96 8.28 W
White Pattern Ё Ё 0.35 0.42 A
Power Supply Current Black Pattern Ё Ё 0.34 0.4 A (3)
Horizontal Stripe Ё Ё 0.58 0.69 A
Differential Input High
VLVTH +100 Ё +300 mV
Threshold Voltage
Differential Input Low
VLVTL -300 Ё -100 mV
LVDS Threshold Voltage
(4)
interface Common Input Voltage VCM 1.0 1.2 1.4 V
Differential input voltage |VID| 200 Ё 600 mV
Terminating Resistor RT Ё 100 Ё ohm
CMOS Input High Threshold Voltage VIH 2.7 Ё 3.3 V
interface Input Low Threshold Voltage VIL 0 Ё 0.7 V
Note (1) The module should be always operated within the above ranges.
The ripple voltage should be controlled under 10% of Vcc (Typ.)
Note (2) Measurement Conditions :

Vcc rising time is 470us

Vcc

0.9Vcc

0.1Vcc

GND
470us

Note (3) The specified power supply current is under the conditions at Vcc = 12 V, Ta = 25 ± 2 ºC, fv = 60 Hz, whereas a power
dissipation check pattern below is displayed.

sĞƌƐŝŽŶϮ͘Ϭ                                         ϵ                                     ĂƚĞΚ
ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

a. White Pattern b. Black Pattern

Active Area Active Area

c. Horizontal Pattern

Note (4) The LVDS input characteristics are as below.

sĞƌƐŝŽŶϮ͘Ϭ                                         ϭϬ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

3.2 BACKLIGHT CONVERTER UNIT

3.2.1 LED LIGHT BAR CHARACTERISTICS
The backlight unit contains 1 pcs light bar. (Ta = 25 ± 2 ºC)
Value
Parameter Symbol Unit Note
Min. Typ. Max.

One String Current IL 94 100 106 mA

One String Voltage VW 33.24 - 37.44 VDC IL =100mA
One String Voltage Variation ϦVW - - 1 V
Life time - 30,000 - - Hrs (1)
Note (1) Dimming Ratio=100%
Note (2) The lifetime is defined as the time which luminance of the LED decays to 50% compared to the initial value, Operating
condition: Continuous operating at Ta = 25±2к, IL =100 mA

3.2.2 CONVERTER CHARACTERISTICS

Value
Parameter Symbol Unit Note
Min. Typ. Max.

Power Consumption PBL - 31.92 36.71 W (1), (2) , IL = 100 mA

Converter Input Voltage VBL 22.8 24.0 25.2 VDC

Converter Input Current IBL - 1.33 1.53 A Non Dimming

VBL=22.8V,
Input Inrush Current IR - - 2.07 Apeak
(IL=typ.) (3)
Dimming Frequency FB 90 160 190 Hz

Dimming Duty Ratio DDR 5 - 100 % (4)

Note (1) The power supply capacity should be higher than the total converter power consumption PBL. Since the pulse width
modulation (PWM) mode was applied for backlight dimming, the driving current changed as PWM duty on and off.
The transient response of power supply should be considered for the changing loading when converter dimming.
Note (2) The measurement condition of Max. value is based on 39" backlight unit under input voltage 24V, average LED
current 106 mA
Note (3) For input inrush current measure, the VBL rising time from 10% to 90% is about 30ms.
Note (4) EPWM signal have to input available duty range. 5% minimum duty ratio is only valid for electrical operation.

sĞƌƐŝŽŶϮ͘Ϭ                                         ϭϭ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

3.2.3 CONVERTER INTERFACE CHARACTERISTICS

Test Value
Parameter Symbol Unit Note
Condition Min. Typ. Max.

ON Ё 2.0 Ё 5.0 V
On/Off Control Voltage VBLON
OFF Ё 0 Ё 0.8 V

External PWM Control HI Ё 2.0 Ё 5.0 V Duty on

(5)
Voltage VEPWM Ё Ё
LO 0 0.8 V Duty off

Error Signal ERR Ё Ё Ё Ё Ё Abnormal: Open

VBL Rising Time Tr1 Ё 30 Ё Ё ms 10%-90%VBL

Control Signal Rising Time Tr Ё Ё Ё 100 ms

Control Signal Falling Time Tf Ё Ё Ё 100 ms

PWM Signal Rising Time TPWMR Ё Ё Ё 50 us

PWM Signal Falling Time TPWMF Ё Ё Ё 50 us

Input Impedance Rin Ё 1 Ё Ё MΩ

PWM Delay Time TPWM Ё 100 Ё Ё ms

Ton Ё 300 Ё Ё ms
BLON Delay Time
Ton1 Ё 300 Ё Ё ms

BLON Off Time Toff Ё 300 Ё Ё ms

Note (1) The Dimming signal should be valid before backlight turns on by BLON signal. It is inhibited to change the external
PWM signal during backlight turn on period.
Note (2) The power sequence and control signal timing are shown in the Fig.1. For a certain reason, the converter has a
possibility to be damaged with wrong power sequence and control signal timing.
Note (3) While system is turned ON or OFF, the power sequences must follow as below descriptions:
Turn ON sequence: VBL → PWM signal → BLON
Turn OFF sequence: BLOFF → PWM signal → VBL
Note (4) When converter protective function is triggered, ERR will output open collector status. (Fig.2)
Note (5) The EPWM interface that inserts a pull up resistor to 5V in Max Duty (100%), please refers to Fig.3.

sĞƌƐŝŽŶϮ͘Ϭ                                         ϭϮ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Tr1 Tf1
VBL 9%/ 9%/

9%/ Toff 9%/

0 Ton
VBLON 2.0V
Ton1
0.8V
0
Backlight on duration
Tr Tf

Ext. Dimming Function

TPWMR
2.0V TPWMF
VEPWM
0.8V
0 Floating
TPWM

VW

External External
PWM PWM Duty
Period

100%

Fig. 1

Fig. 2 Fig. 3

sĞƌƐŝŽŶϮ͘Ϭ                                         ϭϯ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

4. BLOCK DIAGRAM OF INTERFACE

4.1 TFT LCD MODULE

ZyϬ;нͬͲͿ

Zyϭ;нͬͲͿ

ZyϮ;нͬͲͿ

^EZ/sZ
Zyϯ;нͬͲͿ

><;нͬͲͿ d&d>WE>
d/D/E' 
;ϭϵϮϬdžϯdžϭϬϴϬͿ
t&ϮϯͲϰϬϮͲϱϭϯϯ;&EͿ


/EWhdKEEdKZ

KEdZK>>Z
KZyϬ;нͬͲͿ

KZyϭ;нͬͲͿ

KZyϮ;нͬͲͿ

KZyϯ;нͬͲͿ

K><;нͬͲͿ
dZ/sZ;DŝŶŝͲ>s^Ϳ

^>>s^
ͬKEsZdZ

sĐĐ
'E

sL  EϮ͗&&ϬϭͲϰϯϬͲϭϮϯ;&EͿŽƌϭϵϲϯϴϴͲϭϮϬϰϭͲϯ;WͲdtKͿ
KEsZdZKEEdKZ
'E

ZZ Eϭ͗:,ϮͲϰͲϭϰϯE;&EͿ <>/',dhE/d

ͺWtD
>KE

sĞƌƐŝŽŶϮ͘Ϭ                                         ϭϰ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

5. INTERFACE PIN CONNECTION

5.1 TFT LCD MODULE
CNF1 Connector Part No.: FCN (WF23-402-5133)
Pin Name Description Note

1 N.C. No Connection

2 N.C. No Connection

3 N.C. No Connection
(2)
4 N.C. No Connection

5 N.C. No Connection

6 N.C. No Connection

7 SELLVDS LVDS data format Selection (3)(4)

8 N.C. No Connection (2)

9 N.C No Connection (2)

10 N.C. No Connection (2)

11 GND Ground

12 ORX0- Odd pixel Negative LVDS differential data input. Channel 0

13 ORX0+ Odd pixel Positive LVDS differential data input. Channel 0
14 ORX1- Odd pixel Negative LVDS differential data input. Channel 1
(5)
15 ORX1+ Odd pixel Positive LVDS differential data input. Channel 1
16 ORX2- Odd pixel Negative LVDS differential data input. Channel 2
17 ORX2+ Odd pixel Positive LVDS differential data input. Channel 2
18 GND Ground
19 OCLK- Odd pixel Negative LVDS differential clock input.
(5)
20 OCLK+ Odd pixel Positive LVDS differential clock input.
21 GND Ground
22 ORX3- Odd pixel Negative LVDS differential data input. Channel 3
(5)
23 ORX3+ Odd pixel Positive LVDS differential data input. Channel 3
24 N.C. No Connection

25 N.C. No Connection
(2)
26 N.C. No Connection

27 N.C. No Connection

28 ERX0- Even pixel Negative LVDS differential data input. Channel 0 (5)
29 ERX0+ Even pixel Positive LVDS differential data input. Channel 0
30 ERX1- Even pixel Negative LVDS differential data input. Channel 1

sĞƌƐŝŽŶϮ͘Ϭ                                         ϭϱ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

31 ERX1+ Even pixel Positive LVDS differential data input. Channel 1

32 ERX2- Even pixel Negative LVDS differential data input. Channel 2
33 ERX2+ Even pixel Positive LVDS differential data input. Channel 2
34 GND Ground
35 ECLK- Even pixel Negative LVDS differential clock input
(5)
36 ECLK+ Even pixel Positive LVDS differential clock input
37 GND Ground
38 ERX3- Even pixel Negative LVDS differential data input. Channel 3
(5)
39 ERX3+ Even pixel Positive LVDS differential data input. Channel 3
40 N.C. No Connection
(2)
41 N.C. No Connection

42 GND Ground

43 GND Ground

44 GND Ground

45 GND Ground

46 GND Ground

47 N.C. No Connection (2)

48 VCC Power input (+12V)
49 VCC Power input (+12V)
50 VCC Power input (+12V)
51 VCC Power input (+12V)
Note (1) LVDS connector pin order is defined as below.

Note (2) Reserved for internal use. Please leave it open.

sĞƌƐŝŽŶϮ͘Ϭ                                         ϭϲ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Note (3)
SELLVDS Mode
L JEIDA
H(default) VESA
L : Connect to GND, H : Connect to Open or +3.3V
Note (4) Interface optional pin has internal scheme as following diagram. Customer should keep the interface voltage level
requirement which including panel board loading as below.

3.3V
System Board Panel Board
>16K ohm
1K ohm

IC

Interface Voltage Level

VH > VIH
VL < VIL

Note (5) Two pixel data send into the module for every clock cycle. The first pixel of the frame is odd pixel and the second
pixel is even pixel.

Note (6) LVDS connector mating dimension range request is 0.93mm~1.0mm as below

sĞƌƐŝŽŶϮ͘Ϭ                                         ϭϳ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

5.2 CONVERTER UNIT

CN1(Header):JH2-D4-143N (FCN)

Pin No Symbol Feature

1
2
3 VBL +24V
4
5
6
7
8 GND GND
9
10

Normal (GND)
11 ERR
Abnormal (Open collector)

12 BLON BL ON/OFF

13 NC NC

14 E_PWM External PWM Control

CN2(Header): FF01-430-123A(FCN) or 196388-12041-3 (P-TWO)

Pin No Symbol Feature
1 VLED-
2 VLED-
3 VLED-
4 VLED-
Negative of LED String
5 VLED-
6 VLED-
7 VLED-
8 VLED-
9 NC NC
10 VLED+
11 VLED+ Positive of LED String
12 VLED+

sĞƌƐŝŽŶϮ͘Ϭ                                         ϭϴ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Note (1) If Pin14 is open, E_PWM is 100% duty.

Note (2) Input connector pin order defined as follows

Converter

Pin 1 Pin 14

sĞƌƐŝŽŶϮ͘Ϭ                                         ϭϵ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

5.3 LVDS INTERFACE

VESA Format : SELLVDS = H or Open

Current F\FOH

RXCLK̈́

ORX0̈́ G0 R5 R4 R3 R2 R1 R0

ORX1̈́ B1 B0 G5 G4 G3 G2 G1

ORX2̈́ DE VS HS B5 B4 B3 B2

ORX3̈́ RSVD B7 B6 G7 G6 R7 R6

ERX0̈́ G0 R5 R4 R3 R2 R1 R0

ERX1̈́ B1 B0 G5 G4 G3 G2 G1

ERX2̈́ DE VS HS B5 B4 B3 B2

ERX3̈́ RSVD B7 B6 G7 G6 R7 R6

JEIDA Format : SELLVDS = L

Current F\FOH

RXCLK̈́

ORX0̈́ G2 R7 R6 R5 R4 R3 R2

ORX1̈́ B3 B2 G7 G6 G5 G4 G3

ORX2̈́ DE VS HS B7 B6 B5 B4

ORX3̈́ RSVD B1 B0 G1 G0 R1 R0

ERX0̈́ G2 R7 R6 R5 R4 R3 R2

ERX1̈́ B3 B2 G7 G6 G5 G4 G3

ERX2̈́ DE VS HS B7 B6 B5 B4

ERX3̈́ RSVD B1 B0 G1 G0 R1 R0

sĞƌƐŝŽŶϮ͘Ϭ                                         ϮϬ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

R0~R7 Pixel R Data (7; MSB, DE Data enable signal

0; LSB)

G0~G7 Pixel G Data (7; MSB, DCLK Data clock signal

0; LSB)

B0~B7 Pixel B Data (7; MSB,

0; LSB)
Note (1) RSVD (reserved) pins on the transmitter shall be “H” or “L”.

sĞƌƐŝŽŶϮ͘Ϭ                                         Ϯϭ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

5.4 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color.
The higher the binary input, the brighter the color. The table below provides the assignment of the color versus
data input.
Data Signal
Red Green Blue
Color
B B B
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B6 B5 B4 B3 B2
7 1 0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Basic Blue 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Colors Cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Red (0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red (1) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red (2) 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Gray
: : : : : : : : : : : : : : : : : : : : : : : : :
Scale
: : : : : : : : : : : : : : : : : : : : : : : : :
Of
Red (253) 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red
Red (254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red (255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green (0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green (1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0
Green (2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0
Gray
: : : : : : : : : : : : : : : : : : : : : : : : :
Scale
: : : : : : : : : : : : : : : : : : : : : : : : :
Of
Green (253) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0
Green
Green (254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
Green (255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Blue (0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Blue (1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Blue (2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
Gray
: : : : : : : : : : : : : : : : : : : : : : : : :
Scale
: : : : : : : : : : : : : : : : : : : : : : : : :
Of
Blue (253) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1
Blue
Blue (254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0
Blue (255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Note (1) 0: Low Level Voltage, 1: High Level Voltage

sĞƌƐŝŽŶϮ͘Ϭ                                         ϮϮ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

Fclkin
Frequency 60 74.25 80 MHz
(=1/TC)
Input cycle to
LVDS Trcl Ё Ё 200 ps (3)
cycle jitter
Receiver
Spread spectrum
Clock Fclkin_mod Fclkin-2% Ё Fclkin+2% MHz
modulation range
(4)
Spread spectrum
FSSM Ё Ё 200 KHz
modulation frequency
LVDS
Receiver Skew
Receiver TRSKM -400 Ё 400 ps (5)
Margin
Data
Fr5 47 50 53 Hz
Frame Rate
Vertical Fr6 57 60 63 Hz
Active
Total Tv 1090 1125 1480 Th Tv=Tvd+Tvb
Display
Term Display Tvd 1080 1080 1080 Th

Blank Tvb 10 45 400 Th

Horizontal Total Th 1030 1100 1325 Tc Th=Thd+Thb

Active
Display Thd 960 960 960 Tc
Display
Term Blank Thb 70 140 365 Tc
Note (1) Please make sure the range of frame rate has follow the below equationΚ
Fclkin(max) Њ Fr6 Ѽ Tv Ѽ Th
Fr5 Ѽ Tv Ѽ Th Њ Fclkin(min)

sĞƌƐŝŽŶϮ͘Ϭ                                         Ϯϯ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Note (2) This module is operated in DE only mode and please follow the input signal timing diagram below :

Tv
Tvd
Tvb

DE
Th

DCLK

Tc
Thd
Thb
DE

Valid display data (960 clocks)

Note (3) The input clock cycle-to-cycle jitter is defined as below figures. Trcl =| T1 – T|

sĞƌƐŝŽŶϮ͘Ϭ                                         Ϯϰ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Note (4) The SSCG (Spread spectrum clock generator) is defined as below figures.

Note (5) The LVDS timing diagram and the receiver skew margin is defined and shown in following figure.

RXCLK+/-

RXn+/-

TRSKM

sĞƌƐŝŽŶϮ͘Ϭ                                         Ϯϱ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

6.2 POWER ON/OFF SEQUENCE

(Ta = 25 ± 2 ºC)
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the diagram
below.
0.9Vcc 0.9Vcc

0.1VCC 0.1Vcc
0V

0.5ɩT1ɩ10ms T1 T3
0ɩT2ɩ200ms
0ɩT3
500ms ɩT4 T2 T4

LVDS Signals 0V

Power On Power Off

0ЉT7ЉT2
0ЉT8ЉT3
T7 T8

Option Signals
(SELLVDS)

Backlight (Recommended) 50% 50%

500msЉT5
100msЉT6

T5 T6

T9
Vcc
Vcc Dip
T9Љ10ms
Vcc(typ.) x 0.85

0V

Note (1) The supply voltage of the external system for the module input should follow the definition of Vcc.
Note (2) Apply the LED voltage within the LCD operation range. When the backlight turns on before the LCD
operation or the LCD turns off before the backlight turns off, the display may momentarily become
abnormal screen.
Note (3) In case of VCC is in off level, please keep the level of input signals on the low or high impedance.
If T2<0,that maybe cause electrical overstress failure.
Note (4) T4 should be measured after the module has been fully discharged between power off and on period.
Note (5) Interface signal shall not be kept at high impedance when the power is on.
Note (6) Vcc must decay smoothly when power-off.

sĞƌƐŝŽŶϮ͘Ϭ                                         Ϯϲ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
o
Ambient Temperature Ta 25±2 C

Ambient Humidity Ha 50±10 %RH

Supply Voltage VCC 12±1.2 V

Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"

LED Current IL 100±3 mA

Vertical Frame Rate Fr 60 Hz

The LCD module should be stabilized at given temperature for 1 hour to avoid abrupt temperature change
during measuring in a windless room.

LCD Module

LCD Panel

CS - 2000

Field of View = 1º

Light Shield Room

500 mm
(Ambient Luminance < 2 lux)

sĞƌƐŝŽŶϮ͘Ϭ                                         Ϯϳ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown in 7.2. The following items should be
measured under the test conditions described in 7.1 and stable environment shown in 7.1.
Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio CR 2450 3500 - (2)

Gray to
Response Time (VA) 8.5 18 ms (3)
gray
2
Center Luminance of White LC 280 350 cd/m (4)

White Variation δW 1.3 - (6)

Cross Talk CT 4 % (5)

Rx 0.623 -
Red
Ry 0.337 -
θx=0°, θy =0°
Gx Viewing angle 0.311 -
Green
Gy at normal direction 0.617 -
Typ. Typ.
-
Bx -0.03 0.150 +0.03 -
Color Blue
Chromaticity By 0.057 -

Wx 0.280 -
White
Wy 0.290 -
Correlated color
- 10000 - K -
temperature

Color Gamut C.G. - 68 - % NTSC

θx+ 80 88 -
Horizontal
θx- 80 88 -
Viewing Angle CR≥20 Deg. (1)
θy+ 80 88 -
Vertical
θy- 80 88 -

sĞƌƐŝŽŶϮ͘Ϭ                                         Ϯϴ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Note (1) Definition of Viewing Angle (θx, θy) :

Viewing angles are measured by Autronic Conoscope Cono-80

Normal
θx = θy = 0º

θy- θy+

θX- = 90º x- 12 o’clock

y+
θx− direction
θx+

6 o’clock y- x+ θX+ = 90º

θy- = 90º

Note (2) Definition of Contrast Ratio (CR) :

The contrast ratio can be calculated by the following expression.
Surface Luminance of L255
Contrast Ratio (CR) = Surface Luminance of L0
L255: Luminance of gray level 255
L 0: Luminance of gray level 0
CR = CR (5), where CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note (6).

Note (3) Definition of Gray-to-Gray Switching Time :

100%
90%

Optical
Response

10%
0%

Time
Gray to gray Gray to gray
switching time switching time
The driving signal means the signal of gray level 0, 31, 63, 95, 127, 159, 191, 223 and 255.
Gray to gray average time means the average switching time of gray level 0, 31, 63, 95, 127, 159, 191,
223 and 255 to each other.

sĞƌƐŝŽŶϮ͘Ϭ                                         Ϯϵ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Note (4) Definition of Luminance of White (LC, LAVE) :

Measure the luminance of gray level 255 at center point and 5 points
LC = L (5), where L (X) is corresponding to the luminance of the point X at the figure in Note (6).

Note (5) Definition of Cross Talk (CT) :

CT = | YB – YA | / YA × 100 (%)
Where:
YA = Luminance of measured location without gray level 255 pattern (cd/m2)
YB = Luminance of measured location with gray level 255 pattern (cd/m2)

Active Area Active Area

(0, 0) (0, 0)
YA,U (D/2,W/8) YB, U (D/2,W/8)

(D/4,W/4)

Gray 128 Gray 255

YA,L (D/8,W/2) YA, R (7D/8,W/2) YB, L (D/8,W/2) YA, R (7D/8,W/2)

(3D/4,3W/4)

YA, D (D/2,7W/8) YB, D (D/2,7W/8)

(D, W) (D, W)

Note (6) Definition of White Variation (δW) :

Measure the luminance of gray level 255 at 5 points
Maximum [L (1), L (2), L (3), L (4), L (5)]
δW =
Minimum [L (1), L (2), L (3), L (4), L (5)]
Vertical Line
W

sĞƌƐŝŽŶϮ͘Ϭ                                         ϯϬ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

8. PRECAUTIONS
8.1 ASSEMBLY AND HANDLING PRECAUTIONS
[1] Do not apply rough force such as bending or twisting to the module during assembly.
[2] It is recommended to assemble or to install a module into the user’s system in clean working areas. The dust
and oil may cause electrical short or worsen the polarizer.
[3] Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight.
[4] Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the
damage and latch-up of the CMIS LSI chips.
[5] Bezel of Set can not press or touch the panel surface. It will make light leakage or scrape.
[6] Do not plug in or pull out the I/F connector while the module is in operation.
[7] Do not disassemble the module.
[8] Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily
scratched.
[9] Moisture can easily penetrate into LCD module and may cause the damage during operation.
[ 10 ] When storing modules as spares for a long time, the following precaution is necessary.
[ 10.1 ] Do not leave the module in high temperature, and high humidity for a long time. It is highly
recommended to store the module with temperature from 0 to 35кat normal humidity without
condensation.
[ 10.2 ] The module shall be stored in dark place. Do not store the TFT-LCD module in direct sunlight or
fluorescent light.
[ 11 ] When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the
response time will become slow, and the starting voltage of CCFL will be higher than that of room
temperature.

8.2 SAFETY PRECAUTIONS

[1] The startup voltage of a Backlight is approximately 1000 Volts. It may cause an electrical shock while
assembling with the converter. Do not disassemble the module or insert anything into the Backlight unit.
[2] If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of
contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
[3] After the module’s end of life, it is not harmful in case of normal operation and storage.

sĞƌƐŝŽŶϮ͘Ϭ                                         ϯϭ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

9. DEFINITION OF LABELS
9.1 CMI MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

V390HJ1-LE6 Rev. XX
MADE IN CHINA

CAPG
XXXXXXXYMDLNNNN
RoHS

(a) Model Name: V390HJ1-LE6

(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.
(c) Serial ID: X X X X X X X Y M D L N N N N

Serial No.

Product Line

Year, Month, Date

CMI Internal Use

CMI Internal Use

Revision

CMI Internal Use

Serial ID includes the information as below:
(a) Manufactured Date: Year: 0~9, for 2010~2019
Month: 1~9, A~C, for Jan. ~ Dec.
st st
Day: 1~9, A~Y, for 1 to 31 , exclude I ,O, and U.
(b) Revision Code: Cover all the change
(c) Serial No.: Manufacturing sequence of product
(d) Product Line: 1 → Line1, 2 → Line 2, …etc.

sĞƌƐŝŽŶϮ͘Ϭ                                         ϯϮ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

10. PACKAGING
10.1 PACKAGING SPECIFICATIONS
(1) 7 LCD TV modules / 1 Box
(2) Box dimensions : 954(L)x378(W)x602(H)mm
(3) Weight: Approx. 54.5Kg (7 modules per carton)

10.2 PACKAGING METHOD

Packaging method is shown as following figures.

Note:T-CON
Downward
Note:T-CON
Downward

Cushion(Bottom) Module*7 pcs Cushion(Top)

Note:T-CON
Downward

Carton Label

Carton

sĞƌƐŝŽŶϮ͘Ϭ                                         ϯϯ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

Sea / Land Transportation

(40ft HQ / 40ft Container)

sĞƌƐŝŽŶϮ͘Ϭ                                         ϯϰ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

11. MECHANICAL CHARACTERISTIC

sĞƌƐŝŽŶϮ͘Ϭ                                         ϯϱ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

sĞƌƐŝŽŶϮ͘Ϭ                                         ϯϲ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

sĞƌƐŝŽŶϮ͘Ϭ                                         ϯϳ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
 Global LCD Panel Exchange Center www.panelook.com

PRODUCT SPECIFICATION

sĞƌƐŝŽŶϮ͘Ϭ                                         ϯϴ                                     ĂƚĞΚ

ΚϬϮKĐƚ͘ϮϬϭϮ       
dŚĞĐŽƉLJƌŝŐŚƚďĞůŽŶŐƐƚŽ,/D//ŶŶŽ>Ƶdž͘ŶLJƵŶĂƵƚŚŽƌŝnjĞĚƵƐĞŝƐƉƌŽŚŝďŝƚĞĚ

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com