CISCO INTERVIEW QUESTIONS

Which two flags are used in the core handshake of a typical TCP connection
establishment?
Which layer determines if sufficient resources for the intended communication
exist?
Which layer is responsible for Identifying and establishing the availability of
Intended Communication Partner?
Which Protocol will test the connectivity without configuration of Layer 3
Protocols?
What are the important features Of OSI Layer 3-Network Layer? List the
important characteristics of Switches.
What is the access list range for extended ACK, extended IP, and extended
VLANS?
Which layer is responsible for providing mechanisms for multiplexing Upper-
layer Application, Session Establishment, and Teardown of Virtual Circuits?
What is The UDP Datagram Format? Why does networking use a layered
model?
Which service gets data from multiple sources and allocate bandwidth on one?
What things should be considered while designing an enterprise network?
What Is Span Or PSPAN?
What Is TACACS+?
www.imedita.com
What is the Format used for configuring Subnet Mask For an IP Address?
Which Switching Method examines The Destination Mac Address?
What tools are used to Isolate and Troubleshoot Network Issues?
Does extended Ip Access List use Access List Range? If yes which?
State some essential characteristics of ppp Pap Authentication?
What are some ways you can improve network performance?
What are the phases Of ppp Session Establishment? Explain.
Which Authentication Method is used to set up a Session?
Explain Pre, Post, and In Order. State along with examples.
Why is the data link layer used in TCP/IP or OSI layer?
What is the OSI Layers, and what are their functions?
Which Compression Protocols Are Used For Ppp?
Where is the Backup Configuration File found?
Which mechanism happens in a Traffic Light?
List Three Important Properties Of EIGRP?
Provide three features Of IP Access List?
What is the macro to set the nth bit?
Name a X.25 Addressing Standard?
What Is Windowing?
What is a Gateway?
www.imedita.com
What is routing?
What is a node?
What is a link?
What is the Sliding Window Protocol?
What are different routing protocols and how do they function?
Physical Address and Network Topology uses which OSI Layers?
Describe how can you meet challenges associated with IPv6?
What is a real-time OS and how it's different from other OS?
Which Hardware Component stores Buffers, Tables, etc.?
What are some examples of Troubleshooting Methods?
How do you find an IP Address from a Mac Address?
What is the Cisco IOS Exec Command Trace used for?
One Command can specify how many DNS Servers?
Which Is the Serial Encapsulation by Default?
Important Features of Ppp Chap Authentication?
What are the characteristics of an IP Access List?
What Are The Important Characteristics Of Isdn?
Which OSI Layer helps ensure Packet Delivery?
Which Hardware is necessary for Broadcasts?
How can you vary the Router Boot Sequence?
www.imedita.com
Can the Internet Layer handle an IP Packet?
List The Importan Characteristics Of OSPF?
What Are The Important Features Of UDP?
What is The Data Link Mac Layer used for?
What Is The Default Serial Encapsulation?
What is a ‘Window’ in networking terms?
What is the advantage of using a switch?
What is Subnetting, and what is its uses?
List The Default Values In Eigrp Metric?
When does network congestion occur?
Define signal and interrupt handling.
Why Do We Have To Disable CDP?
What are the functions of rarp?
How is a TCP connection made?
OSI Layers and their functions.
What Is The Use Of Dlci?
What Is The Use Of Arp?
What Is Source Quench?
What Is Icmp Protocol?
What happens when a Wildcard Mask Bit is set to 0 in Cisco Routers?
www.imedita.com
State the abbreviation for the Router to tell it to check all numbers?
What Is the Default CDP holdtime in Seconds For Cisco Routers?
What is a firewall? What is the security level in the ASA firewall?
How to convert the User Data from DTE to WAN Service Form?
What Protocols can exist in the Protocol Field of an IP Packet?
Which forms of WAN Services are accessed by Cisco Routers?
What does a Cisco Router check first while using Access Lists?
Cisco Catalyst 5000 uses which LAN Switching Method?
Explain an IP Address to a non-networking professional.
State the use of “IP Name-server 255.255.255.255"?
Which command enables failover in an ASA firewall?
State the different memories used in a Cisco router?
How Many Access Lists are allowed Per Interface?
Which Field in the IP Packet has Network Testing?
What is the Cisco default TCP session timeout?
Explain how cut-through LAN switching works.
What is the Multilink Protocol MLPPP used for?
Describe the end-to-end Network Service?
What Are The Cisco HDLC Protocol?
What is a transparent firewall?
www.imedita.com
What is the purpose of TCP/IP or OSI layer?
What is the purpose of an IP Access List?
What are extended XNS and Extended VINES used for?
How will you use a linked list to stimulate 3 TCP/IP Packets?
Write a program to reverse a linked list.
What is the boundary problem in allocation of size of structures?
What is balanced binary tree?
What Is Flow Or Netflow?
What is VMPS?
What Is The Numbered Range of Ip Access List?

www.imedita.com
Looking for Networking Training?
Join our CCNA, CCNP, CCIE, Checkpoint, F5, Palo Alto, Fortinet Trainings

www.imedita.com