Ac, Ac-At: Vishay Draloric

AC, AC-AT
www.vishay.com
Vishay Draloric
Cemented Leaded Wirewound Resistors
FEATURES
• AEC-Q200 qualified AC-AT series
• High power dissipation in small design
• Non-flammable coating conforming to
UL 94 V-0
• Excellent pulse load capability
• Non-inductive (NI) version available
• WSZ-form lead bending available for SMD mounting
• Material categorization: for definitions of compliance
The AC series is the perfect choice for general purpose please see www.vishay.com/doc?99912
power applications. The AEC-Q200 qualified AC-AT series
is best suited for automotive applications. The robust silicon
cement coating can handle challenging ambient and APPLICATIONS
operating conditions. Typical applications include but are
not limited to energy meters, power supplies and • Automotive electronics
automotive electronics. For a given application, • Industrial electronics
requirements of ohmic value, rated power, peak voltage, • Power supplies
pulse shape, pulse duration, lead bending, and
environmental conditions may be submitted to recommend • White goods
the most suitable product. • Pre-charged applications
Various lead forms are available such as RT (radial taped),
WSZ (Z-form), DK (double kink), EK (single kink) with defined
mounting pitch.
STANDARD ELECTRICAL SPECIFICATIONS

RESISTANCE RESISTANCE RESISTANCE
RATED RATED LIMITING RANGE (1) RANGE (1) RANGE (1)
RESISTANCE
TYPE DISSIPATION DISSIPATION VOLTAGE TCR = TCR = TCR =
TOLERANCE
P40 P70 Umax. -10 ppm/K to +100 ppm/K to ± 100 ppm/K
-80 ppm/K +180 ppm/K
AC01 1W 0.9 W P x R 0.10  to 33  36  to 2.4 k - ±5%

AC01-AT 1W 0.9 W P x R 0.39  to 33  36  to 2.4 k - ±5%
AC03 (2) 3W 2.5 W P x R 0.10  to 390  430  to 3.3 k 3.6 k to 5.1 k ±5%
AC03-AT 3W 2.5 W P x R 0.27  to 390  430  to 3.3 k - ±5%
AC04 4W 3.5 W P x R 0.10  to 620  680  to 6.8 k - ±5%
AC04-AT 4W 3.5 W P x R 0.22  to 620  680  to 6.8 k - ±5%
AC05 5W 4.7 W P x R 0.10  to 910  1.0 k to 10 k - ±5%
AC05-AT 5W 4.7 W P x R 0.62  to 910  1.0 k to 10 k - ±5%
AC07 7W 5.8 W P x R 0.10  to 820  910  to 15 k - ±5%
AC07-AT 7W 5.8 W P x R 1.0  to 820  910  to 15 k - ±5%
AC10 10 W 8.4 W P x R 0.22  to 560  620  to 27 k - ±5%
AC10-AT 10 W 8.4 W P x R 2.0  to 560  620  to 27 k - ±5%
Notes
• The operating temperature range for these resistors is from -55 °C up to 250 °C
(1) Resistance value to be selected for ± 5 % from E24
(2) AC03 WSZ: P = 1.8 W; P
40 70 °C = 1.5 W
Revision: 26-Mar-18 1 Document Number: 28730

For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AC, AC-AT
www.vishay.com
Vishay Draloric
PART NUMBER AND PRODUCT DESCRIPTION

Part Number: AC03000001509JAC00
AC03AT0001509JAC00
A C 0 3 0 0 0 0 0 1 5 0 9 J A C 0 0
A C 0 3 A T 0 0 0 1 5 0 9 J A C 0 0
TCR / TOLERANCE PACKAGING

MODEL VARIANT VALUE SPECIAL
MATERIAL CODE CODE
AC01000 = AC01 0 = neutral 0 = standard 3 digit value J = ± 5.0 % (see 00 = standard
AC03000 = AC03 1 = RT 1 digit Packaging 2 digit code =
AC04000 = AC04 2 = SWI multiplier table) customized version (1)
AC05000 = AC05 3 = DK SP 20 mm MULTIPLIER
AC07000 = AC07 4 = DK LP 33 mm 7 = *10-3
AC10000 = AC10 5 = DK LP 17.8 mm 8 = *10-2
6 = NI Non inductive 9 = *10-1
AC01AT0 = AC01-AT 7 = DK LP 25.4 mm 0 = *100
AC03AT0 = AC03-AT 8 = DK SP 25.4 mm 1 = *101
AC04AT0 = AC04-AT 9 = WSZ 6720 2 = *102
AC05AT0 = AC05-AT Z = Value overflow
AC07AT0 = AC07-AT A = EK 22.5 mm
AC10AT0 = AC10-AT B = EK 17.8 mm
C = EK 25.4 mm
D = Cu wire 0.8 mm
E = EK 33 mm
G = DK SP 33 mm
H = EK 20 mm
I = DK SP 17.8 mm

Product Description: AC03 15R 5 % AC
AC03AT 15R 5 % AC
AC03 15R 5% AC
AC03-AT 15R 5% AC
TYPE RESISTANCE TOLERANCE PACKAGING

AC01 AC01-AT R10 = 0.1  5% AC LB
AC03 AC03-AT 75R = 75  A1 LC
AC04 AC04-AT 27K = 27 k AB LK
AC05 AC05-AT AE BM
AC07 AC07-AT
AC10 AC10-AT
Note
(1) For special windings or the non-inductive versions, please contact: [email protected]

AC, AC-AT
www.vishay.com
Vishay Draloric
PACKAGING
TYPE / SIZE CODE DESCRIPTION QUANTITY PACKAGING STYLE WIDTH PITCH DIMENSIONS
AC01 Taped acc. to IEC 60286-1

A1 A1 1000 63 mm 10 mm 260 mm x 85 mm x 70 mm
AC01-AT fan-folded in a box
AC01 DK/EK LC LC 500 Bulk packaging - - 260 mm x 80 mm x 55 mm
Taped acc. to IEC 60286-2

AC01 RT AE RE 2500 - 12.7 mm 200 mm x 46 mm x 334 mm
fan-folded in a box

AC AC 500 63 mm 10 mm 260 mm x 85 mm x 58 mm
Taped acc. to IEC 60286-2

AC03 RT AQ AQ 1800 - 12.7 mm 200 mm x 46 mm x 334 mm
fan-folded in a box
AC03 WSZ Blister taped acc. to

BM BM 1250 - 8 mm 350 mm x 350 mm x 55 mm
AC03-AT WSZ IEC 60286-3 in a box
AC04 (1) Taped acc. to IEC 60286-1 260 mm x 85 mm x 70 mm

AC AC 500 63 mm 10 mm
AC04-AT (1) fan-folded in a box 260 mm x 85 mm x 58 mm
AC04 DK/EK LC LC 500 Bulk packaging - 25.4 mm 224 mm x 82 mm x 54 mm


AC07 DK/EK LB LB 250 Bulk packaging - - 224 mm x 82 mm x 54 mm

AB AB 250 88 mm 10 mm 265 mm x 105 mm x 105 mm
Note
(1) Manufacturing at different production locations may involve use of differently sized box

AC, AC-AT
www.vishay.com
Vishay Draloric
DESCRIPTION ASSEMBLY
Wirewound resistors are best suited for use in high power, The resistors are axial leaded for soldering. The terminals of
high current applications. The silicon cement lacquer the resistors are completely lead (Pb)-free, the special tin
coating enables AC series to withstand challenging plating provides compatibility with lead (Pb)-free and
operating and environmental conditions. The coating is lead-containing soldering processes.
resistant to cleaning solvents specified in IEC 60115-1 (1). Special lead forms may be available on request, please
Production is strictly controlled and follows an extensive set inquire at [email protected]. These components
of instructions established for reproducibility. are high dissipation power resistors, customers are advised
The winding is done with a specific material on a specially to use a high melting point solder.
developed fine ceramic body (Al2O3). The ceramic meets the
highest requirements against mechanical resistance, APPLICATION INFORMATION
thermal shocks, dielectric strength, and insulation The power dissipation of the resistor generates a
resistance at high temperatures. With different diameters temperature rise with respect to the ambient. The
and turn spacings of resistive wire, a large ohmic value permissible dissipation is derated for temperatures above
range can be covered. 40 °C, as shown in the derating diagram, in order to avoid
The resistors are marked with resistance, rated dissipation overheating of the resistor. The heat dissipated from the
(P40) and tolerance. Product quality is verified by testing resistor may affect adjacent components, hence proper
procedures, performed on all individual resistors. clearance will be required in order to avoid overheating. The
Resistance is measured on the lead wires at a distance of resistive wire is encapsulated by a protective lacquer
6 mm from the resistor body. If a greater length of lead wire coating.
is used in the application, the user may need to consider the All materials used are non-flammable and inorganic.
additional wire resistance, particularly with low resistance
These resistors do not feature a limited lifetime when
products.
operated within the permissible limits. However, resistance
value drift increasing over operating time may result in
MATERIALS
exceeding a limit acceptable to the specific application,
Vishay acknowledges the following systems for the thereby establishing a functional lifetime.
regulation of hazardous substances:
• IEC 62474, Material Declaration for Products of and for the APPROVALS
Electrotechnical Industry, with the list of declarable The AC-AT series is AEC-Q200 qualified, specifically for use
substances given therein (2) in automotive applications.
• The Global Automotive Declarable Substance List
(GADSL) (3) RELATED PRODUCTS
• The REACH regulation (1907/2006/EC) and the related list UL approved, special cement coated fusible resistor is also
of substances with very high concern (SVHC) (4) for its available. For details please see the datasheet:
supply chain “AC01-CS, AC03-CS, AC05-CS - Axial Cemented Fusible
The products do not contain any of the banned substances Wirewound Safety Resistors” www.vishay.com/doc?28909
as per IEC 62474, GADSL, or the SVHC list, see For high surge wirewound products, silicon cement coated
www.vishay.com/how/leadfree. Hence the products fully Z300-Cxx series is available, see the datasheet:
comply with the following directives:
“Z300-Cxx - High Surge Axial Cemented Wirewound
• 2000/53/EC End-of-Life Vehicle Directive (ELV) and Resistors” www.vishay.com/doc?21027
Annex II (ELV II)
For precision applications, cement coated PAC series is
• 2011/65/EU Restriction of the Use of Hazardous available, see the datasheet:
Substances Directive (RoHS) with amendment “PAC Series - Cemented Wirewound Precision Resistors”
2015/863/EU www.vishay.com/doc?28731
• 2012/19/EU Waste Electrical and Electronic Equipment 
Directive (WEEE) 
Vishay pursues the elimination of conflict minerals from 
its supply chain, see the Conflict Minerals Policy at
www.vishay.com/doc?49037.
Notes
(1) Other cleaning solvents with aggressive chemicals should be evaluated in actual cleaning process for their suitability
(2) The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at http://std.iec.ch/iec62474
(3) The Global Automotive Declarable Substance List (GADSL) is maintained by the American Chemistry Council and available at www.gadsl.org
(4) The SVHC list is maintained by the European Chemical Agency (ECHA) and available at http://echa.europa.eu/candidate-list-table

AC, AC-AT
www.vishay.com
Vishay Draloric
PULSE DIAGRAMS
(ti = pulse duration; tp = repetition time)
10 000 10 000
tp/ti = 1000
max. (W)
Pˆ max. (W)
R10
tp/ti = 1000 1R0
1000 1R0 1000 tp/ti = 200 10R
P
ˆ
R10 110R
tp/ti = 200 10R 4K7
100R tp/ti = 50
100 2K0 100
tp/ti = 50
tp/ti = 10
tp/ti = 10
10 10 tp/ti = 2
tp/ti = 2
1 1
10-6 10-5 10-4 10-3 10-2 10-1 1 10-6 10-5 10-4 10-3 10-2 10-1 1
ti (s) ti (s)
AC01 and AC01-AT Pulse on a regular basis; max. permissible AC03 and AC03-AT Pulse on a regular basis; max. permissible
peak pulse power ( P̂ max.) as a function of pulse duration (ti) peak pulse power ( P̂ max.) as a function of pulse duration (ti)
10 000 10 000
tp/ti = 1000
Pˆ max. (W)
max. (W)
R10 tp/ti = 1000
1R0
tp/ti = 200 tp/ti = 200
1000 10R 1000 1R1
P
ˆ
100R R10
tp/ti = 50 6K8 tp/ti = 50 11R
100R
100 100 8K2
tp/ti = 10 tp/ti = 10
tp/ti = 2 tp/ti = 2
10 10
1 1
10-6 10-5 10-4 10-3 10-2 10-1 1 10-6 10-5 10-4 10-3 10-2 10-1 1 10
ti (s) ti (s)
10 000 10 000
tp/ti = 1000 R68
Pˆ max. (W)
Pˆ max. (W)
tp/ti = 1000
1R1 tp/ti = 200 2R2
tp/ti = 200 R10 33R
1000 11R 1000 240R
tp/ti = 50
tp/ti = 50 100R 15K
15K
tp/ti = 10
100 tp/ti = 10 100
tp/ti = 2
tp/ti = 2
10 10
1 1
10-6 10-5 10-4 10-3 10-2 10-1 1 10 10-6 10-5 10-4 10-3 10-2 10-1 1 10
ti (s) ti (s)

AC, AC-AT
www.vishay.com
Vishay Draloric
PULSE DIAGRAMS
Pulse energy in joules or wattseconds is calculated with the help of the R-value to be used in the application. Choose the R
value on X axis and look for the corresponding E (Ws/) value on Y axis. Multiplying both the R () to corresponding E (Ws/),
will be resultant total pulse Energy (Ws or J) for adiabatic conditions.
100 1000
Pulse Energy (Ws/Ω)

100
10
10
1
1
0.1 0.1
0.01
0.01
0.001
0.001
0.0001
0.0001 0.00001
0.1 1 10 100 1000 10 000 0.1 1 10 100 1000 10 000
R (Ω) R (Ω)
AC01 and AC01-AT Pulse capability; E (Ws) as a function of R () AC03 and AC03-AT Pulse capability; E (Ws) as a function of R ()
1000 1000
100 100
10 10
1 1
0.1 0.1
0.01 0.01
0.001 0.001
0.0001 0.0001
0.1 1 10 100 1000 10 000 0.1 1 10 100 1000 10 000
R (Ω) R (Ω)
1000 1000
100 100
10 10
1 1
0.1 0.1
0.01 0.01
0.001 0.001
0.0001 0.0001
0.1 1 10 100 1000 10 000 0.1 1 10 100 1000 10 000 100 000
R (Ω) R (Ω)

AC, AC-AT
www.vishay.com
Vishay Draloric
1500 2000
Vˆ max. (V)
Vˆ max. (V)
1500
1000
1000
500
500
0 0
10-6 10-5 10-4 10-3 10-2 10-1 1 10-6 10-5 10-4 10-3 10-2 10-1 1
ti (s) ti (s)
peak pulse voltage ( Vˆ max.) as a function of pulse duration (ti) peak pulse voltage ( Vˆ max.) as a function of pulse duration (ti)
2500 2500
Vˆ max. (V)
2000 Vˆ max. (V) 2000
1500 1500
1000 1000
500 500
0 0
10-6 10-5 10-4 10-3 10-2 10-1 1 10-6 10-5 10-4 10-3 10-2 10-1 1
ti (s) ti (s)
5000 5000
Vˆ max. (V)
Vˆ max. (V)
4000 4000
3000 3000
2000 2000
1000 1000
0 0
10-6 10-5 10-4 10-3 10-2 10-1 1 10-6 10-5 10-4 10-3 10-2 10-1 1
ti (s) ti (s)

AC, AC-AT
www.vishay.com
Vishay Draloric
FUNCTIONAL PERFORMANCE
120
Rated Power in %
100
80
60
40
20
0
-40 0 50 100 150 200 250 300 350
40
Ambient Temperature in °C
Derating
350
Temperature Rise in K
AC10,
300 AC10-AT
250 AC07,
AC07-AT
200 AC05,
AC05-AT
150 AC04,
AC04-AT
100 AC03,
AC03-AT
50
AC01,
AC01-AT
0
0 5 10 15
Temperature Rise Power in W

AC, AC-AT
www.vishay.com
Vishay Draloric
TESTS PROCEDURES AND REQUIREMENTS
All tests are carried out in accordance with the following Unless otherwise specified the following values apply:
specifications: • Temperature: 15 °C to 35 °C
• IEC 60115-1, generic specification (includes tests) • Relative humidity: 45 % to 75 %
The test and requirements table contains only the most • Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar)
important tests. For the full test schedule refer to the
For performing some of the tests, the components are
documents above.
mounted on a test board in accordance with IEC 60115-1,
The tests are carried out in accordance with IEC 60068-2-xx 4.31.
test method and under standard atmospheric conditions in
In test procedures and requirements table, only the tests
accordance with IEC 60068-1, 5.3.
and requirements are listed with reference to the relevant
Climatic category -40 / 200 / 56 (rated temperature range: clauses of IEC 60115-1 and IEC 60068-2-xx test methods.
lower category temperature, upper category temperature; A short description of the test procedure is also given.
damp heat, steady state, test duration: 56 days) is valid.
TEST PROCEDURES AND REQUIREMENTS

IEC 60068-2
IEC 60115-1 REQUIREMENTS
TEST TEST PROCEDURE
CLAUSE PERMISSIBLE CHANGE (RMAX.)
METHOD
Room temperature;
4.13 - Short time overload 10x rated power P40; ± (2 % R + 0.1 )
5s
21 (Ua1)
Robustness of No damage
4.16 21 (Ub) Tensile, bending and torsion
terminations ± (0.5 % R + 0.05)
21 (Uc)
Resistance to Unmounted components
4.18 20 (Tb) ± (0.5 % R + 0.05)
soldering heat (260 ± 5) °C; (10 ± 1) s
30 min at -55 °C and
Rapid change
4.19 - 30 min at +200 °C; ± (1.5 % R + 0.05 )
of temperature
5 cycles
4.23 Climatic sequence:
4.23.2 2 (Ba) Dry heat 16 h; 200 °C
Damp heat
24 h; 55 °C;
4.23.3 30 (Db) (accelerated)
90 % to 100 % RH
1st cycle
4.23.4 1 (Aa) Cold 2 h; -55 °C ± (1 % R + 0.05 )
2 h; 8.5 kPa;
4.23.5 13 (M) Low air pressure
15 °C to 35 °C
Damp heat 5 days; 55 °C;
4.23.6 30 (Db)
remaining cyclic 95 % to 100 % RH; 5 cycles
Damp heat, 56 days; (40 ± 2) °C;
4.24 78 (Cab) ± (5 % R + 0.1 )
(steady state) (93 ± 5) % RH
Endurance 1000 h;
4.25.2 - ± (5 % R + 0.1 )
(at room temperature) loaded with 116 % of P70
Endurance at 125 °C; without load; 1000 h ± (5 % R + 0.1 )
4.25.3 - upper category
temperature 200 °C; 30 % of P70; 1000 h ± (5 % R + 0.1 )
IEC 60695-11-5
4.35 - Flammability No burning after 30 s
needle flame test; 10 s
(85 ± 2) °C; RH (85 ± 3) %;
Damp heat, steady state, 1000 h;
4.37 67 C(y) ± (5 % R + 0.1 )
accelerated 10 % of operation power (P70)
U  0.3 x Umax.
2 discharges, 8 kV
4.38 - Electrostatic discharge test ± (5 % R + 0.1 )
(1 positive, 1 negative)

AC, AC-AT
www.vishay.com
Vishay Draloric
DIMENSION AND MASS
L
d
x
B D
DIMENSIONS in millimeters
TYPE Lmax. Dmax. d xmax. B MASS PER UNIT (g)
AC01, AC01-AT 11.0 4.3 2 63 ± 1 0.52
AC03, AC03-AT 13.0 4.8 2 63 ± 1 0.75
AC04, AC04-AT 16.5 5.5 3 63 ± 1 1.10
0.8 ± 0.03
AC05, AC05-AT 18.0 7.5 3 63 ± 1 1.90
AC07, AC07-AT 26.0 7.5 3 73 ± 1 2.60
AC10, AC10-AT 44.0 8.0 3 88 ± 1 4.50
LEAD TERMINATION BENDING FORMS
P1 P1
L L L
ØD
Ød Ød Ød
h h h
P P2 P2
ØB ØB ØB SMAX.
LEAD BENDING STYLE LEAD BENDING STYLE = DK SP LEAD BENDING STYLE = DK LP

= EK (Single Kink) (Double Kink Small Pitch) (Double Kink Large Pitch)
DIMENSIONS - Single and double kink lead type outline

TERMINATION PART
Ø Dmax. Lmax. KINK h ± 1 P ± 0.5 P1 ± 0.5 P2 ± 3 Smax. Ø B ± 0.1 MASS
TYPE (mm) (mm) TYPE WIRE DIAMETER (1) (mm) (mm) (mm) (mm) (mm) (mm) (g) NUMBER
Ø d (mm) VARIANT
EK 0.8 ± 0.03 8.0 17.8 - - 2 1.0 0.52 B
AC01 4.3 11.0 DK SP 0.8 ± 0.03 8.0 - 19.8 17.8 2 1.0 0.52 I
DK LP 0.8 ± 0.03 8.0 - 17.8 17.8 2 1.0 0.52 5
EK 0.8 ± 0.03 8.0 20.0 - - 2 1.0 0.75 H
EK 0.8 ± 0.03 8.0 25.4 - - 2 1.0 0.75 C
DK SP 0.8 ± 0.05 8.0 - 22.0 20.0 2 1.0 0.75 3
AC03 4.8 13.0
DK SP 0.8 ± 0.05 8.0 - 27.4 25.4 2 1.0 0.75 8
DK LP 0.8 ± 0.05 8.0 - 17.8 17.8 2 1.0 0.75 5
DK LP 0.8 ± 0.05 8.0 - 25.4 25.4 2 1.0 0.75 7
EK 0.8 ± 0.05 8.0 25.4 - - 2 1.0 1.10 C
DK SP 0.8 ± 0.05 8.0 - 22.0 20.0 2 1.0 1.10 3
AC04 5.5 16.5
DK SP 0.8 ± 0.05 8.0 - 27.4 25.4 2 1.0 1.10 8
DK LP 0.8 ± 0.05 8.0 25.4 25.4 2 1.0 1.10 7
EK 0.8 ± 0.05 8.0 22.5 - - 2 1.0 1.90 A
AC05 7.5 18.0 EK 0.8 ± 0.05 8.0 25.4 - - 2 1.0 1.90 C
DK SP 0.8 ± 0.05 8.0 - 22.0 20.0 2 1.0 1.90 3
EK 0.8 ± 0.05 8.0 33.0 - - 2 1.0 2.60 E
AC07 7.5 26.0 DK SP 0.8 ± 0.05 8.0 - 35.0 33.0 2 1.0 2.60 G
DK LP 0.8 ± 0.05 8.0 - 33.0 33.0 2 1.0 2.60 4
Note
(1) Terminal wire material is FeCu

AC, AC-AT
www.vishay.com
Vishay Draloric
Z-FORM LEADS FOR SMD MOUNTING in millimeters

A
L
ØD
LEAD BENDING STYLE = WSZ

l
(Z-form) b
L
a
E F Solder pad dimensions
Ød
TYPE WSZ Ød Ø Dmax. A L F H E a b l
AC03, AC03-AT 0.8 4.8 17 ± 0.3 11 - 12 4.8 ± 0.2 3.6 ± 0.2 5.0 ± 0.4 2.5 5.5 14.5
AC01 WITH RADIAL TAPING

LEAD BENDING STYLE = RT (Radial Taped)
P
Pitch of components P 12.7 ± 1.0
Lead spacing F 5.0 + 0.6, - 0.1
Width of carrier tape W 18.0 ± 0.5
Height for cutting (max.) L1 11

H1
Height for insertion (max.) H1 32
L1 F
AC03 WITH RADIAL TAPING

LEAD BENDING STYLE = RT (Radial Taped)
P
Pitch of components P 12.7 ± 1.0
Lead spacing F 5.0 + 0.4, - 0.2
Width of carrier tape W 18.0 ± 0.5
H1 Height for cutting (max.) L1 11
Height for insertion (max.) H1 32
L1 F

Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17 1 Document Number: 91000

Ac, Ac-At: Vishay Draloric

Uploaded by

Copyright:

Available Formats

Ac, Ac-At: Vishay Draloric

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ac, Ac-At: Vishay Draloric

Uploaded by

Copyright:

Available Formats

AC, AC-AT

STANDARD ELECTRICAL SPECIFICATIONS

AC01 1W 0.9 W P x R 0.10  to 33  36  to 2.4 k - ±5%

Revision: 26-Mar-18 1 Document Number: 28730

PART NUMBER AND PRODUCT DESCRIPTION

TCR / TOLERANCE PACKAGING

TYPE RESISTANCE TOLERANCE PACKAGING

Revision: 26-Mar-18 2 Document Number: 28730

AC01 Taped acc. to IEC 60286-1

AC01 DK/EK LC LC 500 Bulk packaging - - 260 mm x 80 mm x 55 mm

Taped acc. to IEC 60286-2

AC03 Taped acc. to IEC 60286-1

AC03 DK/EK LC LC 500 Bulk packaging - - 224 mm x 82 mm x 54 mm

Taped acc. to IEC 60286-2

AC03 WSZ Blister taped acc. to

AC04 (1) Taped acc. to IEC 60286-1 260 mm x 85 mm x 70 mm

AC04 DK/EK LC LC 500 Bulk packaging - 25.4 mm 224 mm x 82 mm x 54 mm

AC05 Taped acc. to IEC 60286-1

AC05 DK/EK LC LC 500 Bulk packaging - - 224 mm x 82 mm x 54 mm

AC07 Taped acc. to IEC 60286-1

AC07 DK/EK LB LB 250 Bulk packaging - - 224 mm x 82 mm x 54 mm

AC10 Taped acc. to IEC 60286-1

Revision: 26-Mar-18 3 Document Number: 28730

Revision: 26-Mar-18 4 Document Number: 28730

Revision: 26-Mar-18 5 Document Number: 28730

Pulse Energy (Ws/Ω)

Pulse Energy (Ws/Ω)

Pulse Energy (Ws/Ω)

Revision: 26-Mar-18 6 Document Number: 28730

2000 Vˆ max. (V) 2000

Revision: 26-Mar-18 7 Document Number: 28730

Revision: 26-Mar-18 8 Document Number: 28730

TEST PROCEDURES AND REQUIREMENTS

Revision: 26-Mar-18 9 Document Number: 28730

LEAD BENDING STYLE LEAD BENDING STYLE = DK SP LEAD BENDING STYLE = DK LP

DIMENSIONS - Single and double kink lead type outline

Revision: 26-Mar-18 10 Document Number: 28730

Z-FORM LEADS FOR SMD MOUNTING in millimeters

LEAD BENDING STYLE = WSZ

E F Solder pad dimensions

TYPE WSZ Ød Ø Dmax. A L F H E a b l

AC01 WITH RADIAL TAPING

Lead spacing F 5.0 + 0.6, - 0.1

Width of carrier tape W 18.0 ± 0.5

Height for cutting (max.) L1 11

AC03 WITH RADIAL TAPING

Lead spacing F 5.0 + 0.4, - 0.2

Width of carrier tape W 18.0 ± 0.5

H1 Height for cutting (max.) L1 11

Height for insertion (max.) H1 32

Revision: 26-Mar-18 11 Document Number: 28730

© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

Revision: 08-Feb-17 1 Document Number: 91000

You might also like