Title Rain Detector Alarm System
Title Rain Detector Alarm System
Introduction
In todays climate change that Our country experiencing such as sudden rain at any time.
We need a solution for a household (such as cloths that almost dry to wet) , Agriculture (
drying some palay crops),industrial( electrical machine that outside the shelves ), also in
vehicle (with automatic wiper) and all the people who will benefit to it. A rain sensor is a
switching device activated by rainfall. The rain detector is a self-contained electronic device that
generates a signal when its sensor is in contact with water.
A rain sensor is a rainfall triggered device. Some applications of rain sensors are; first, connecting the
device to automatic irrigation system to make the system shut down by sensing rain drop. The second is
a device used to shield the interior of automobiles from rain and to support the automatic mode of
windscreen wipers. An additional application in professional satellite communications, antennas are
used to trigger a rain blower on the aperture of the antenna feed to remove water droplets from the
Mylar cover that keeps pressurized and dry air inside the wave-guides
- Oyubu A.O, (2017) d“ esign and implementation of a rain water detector-alarm system ”
International Journal of Advancements in Research & Technology, Vol 4, Issue 6, June .
Rain detection system for power windows by using various components integrated on the PCB is
implemented. The ULN2003 is interfaced through microcontroller AT89C51. The Relay and pre
programmed microcontroller sends the signals to the motor which closes the glass. The glass which is
mounted on the steel channel moves up when it senses the rain. This work is analogues to Automatic
wiper system where wipers are used to remove the droplets of rain. But wipers are not used here. In
this system glass goes upwards when it detects rain and downwards when no rain is detected. This is
helpful for the driver to concentrate on driving to avoid accidents and it also helps in preventing the
interior destruction of the car.
- Design of Rain Detection System for Power Windows Imran Ahmed Khan, Khushboo Gupta
Department of ICE, GCET Greater Noida, India
The project “Rain detection with automatic closing of window ” was designed to control the window
automatically based on the rain sensor detection. Rain operated motor was designed based on
conduction sensor (Tough sensor) circuit, Control Unit, stepper motor . The sensor was used to detect
the rain or water flow. Therefore when it senses window closes automatically & opens when it is not in
contact with rain or water flow.
- Rain Detection With Automatic Close Of Window V Sundara Siva Kumar* P Nagesh
Present development of a light reflection type rain sensor is a key device of our automatic windshield
wiper system. The design concept of the sensor is based on the quantification on both detected rainfalls
and wiping modes in order to match the wiping mode in an operator's mind by optimizing the optical
sensing system and establishing an algorithm for controlling wiping.
- Terakura, O., Kurahashi, A., Wakabayashi, S., Tokunaga, M. et al., "Development of Rain Sensor
for Automatic Wiper System," SAE Technical Paper 2001-01-0612, 2001
Accurate measurements of rainfall are important in meteorology, hydrology (e.g. flood warning),
agriculture, environmental policy and weather forecasting. Atmospheric observation systems currently
include surface stations (rain gauges), weather radiosondes, radar, and satellite systems. They require
costly installation and operation, and the combined measurements are not sufficient in temporal or in
spatial resolution, especially close to the ground.
- “Environmental Sensor Networks Using Existing Wireless Communication Systems for Rainfall
and Wind Velocity Measurements Hagit Messer, Artem Zinevich, and Pinhas Alpert