ATLAS COPCO

ROCK DRILL OIL

An environmentally safe lubricant
that combines technology and
environment
DO YOUR BEST FOR BOTH THE
ENVIRONMENT AND YOUR EQUIPMENT

Atlas Copco Rock Drill Oil is specially developed for Atlas

Copco pneumatic and hydraulic rock drills and down-the-
hole hammers. The lubricating oil is made of carefully
selected components that gives the highest technical
performance, and has a wide temperature range that gives
you optimum operation in the most different ambient
temperatures.

It is especially suitable for water well drilling since there is

no contamination from mineral oils.

meeting high demands protects from corrosion

The development of lubricating oil for pneumatic Atlas Copco Rock Drill Oil has proprietary
and hydraulic tools has been driven by the high lubricating compounds that preferentially wet the
demands on environment and reliability. It with- steel, so they are resistant to being washed off in
stands heavy loads and protects against wear and a water, saline water, or foam environment. This
corrosion. helps reduce the corrosion (rust) that can develop
in these environments on the internal parts of the
renewable raw materials hammer even after the equipment has been used.
More and more users are recognising the ad- Atlas Copco Rock Drill Oil also has a special
vantages of using environmentally adapted filming additive that prevents piston scuffing and
lubricants. In applications where the lubricant heat build up. Wear of internal hammer parts is
is contaminating the surroundings, the use of reduced dramatically thereby increasing profit-
environmentally adapted lubricants will therefore ability.
become strong in demand. Atlas Copco Rock
Drill Oil is based on renewable raw materials that
are readily biodegradable.

for all types of drilling

Atlas Copco Rock Drill Oil is a unique product
developed for all types of drilling where percus-
sive hammers are used, such as DTH hammer, air
tracks, casing drivers and top hammers to save reduces consumption
wear and improve their performance. We recom- Atlas Copco Rock Drill Oil has a viscosity that
mend the use of Atlas Copco Rock Drill Oil in all allows the lubricant to flow freely to areas requir-
in-line lubricators. ing lubrication. Lubrication can be better con-
trolled and consumption reduced by using Atlas
minimize contamination Copco Rock Drill Oil.
Atlas Copco Rock Drill Oil reduces the potential
of surface or groundwater environmental damage higher efficiency
during mining production, mineral exploration, Atlas Copco Rock Drill Oil is an environmentally
construction of roads and pipelines, quarrying, safe product that lubricates more effectively than
water well drilling, and oil and gas exploration. conventional lubricants, while reducing contami-
Particularly suited for drilling uncontaminated nation of surface and groundwater.
water wells in sensitive areas such as adjacent to
streams and lakes, or where groundwater protec-
tion is important.
 VISCOSITY vs TEMPERATURE
PRODUCT FEATURES
• Reduces the risk of scoring and
abrasion.
• Protects against corrosion and
oxidation.
• Insensitive to ambient temperature
variations.
• Works equally well throughout the
temperature range - 35°C to + 45°C
(-31oF to +113oF).
• Provides a lubricant film in excess of
100,000 PSI / 689 MPa.
• Bio Based - 100% renewable raw
materials.

technical features
Specific density 907 kg/m3
Boiling point > 300oC
Freezing point -30oC
pH 7,0 - 7,3 Atlas Copco Rock Drill Oil
Flashpoint and method > 279oC ISO 68 viscosity/temperature relationship
of determination C.O.C. ISO 46 viscosity/temperature relationship
ISO 32 viscosity/temperature relationship

BIOdeGRADABILITY

Atlas Copco Rock Drill Oil

Mineral oil

TECHNICAL DATA COMPARISON

BioBlend Mobil Shell Chevron Atlas Copco
RDP 100 Almo 527 Torcula 100 Aries 100 Rock Drill Oil
ISO grade 100 not listed 100 100 46
Viscosity @ 40 C o
100,0 112,9 100,0 95,0 46,0
Viscosity @ 100 C o
19,3 11,4 11,6 10,9 8,9
Viscosity index >220 91 104 98 >214
Pour point oC -35 -30 -33 -31 -35
Flash point Co
>315 204 263 230 >279
Timken OK load >27 kg not listed 23 kg 30 kg 35 kg
Falex E.P. 3500 not listed not listed 3200 >10 000
Environmen- Environmen- Environmen-
Biodegradability >90% tally per- tally per- tally per- >99%
sistant sistant sistant
9851 3367 01

CONTAINER LOADING DIAGRAMS

20 ft container 40 ft container 2)
Pallet SIZE QTY PAILS:
B A D D B A 1330 pcs
A 48 x 36 in 60 Pails WEIGHT:
D D
201404 © Atlas Copco Secoroc AB. Subject to alteration without prior notice.

A B A B 53 200 lbs
B 48 x 48 in 80 Pails
23 940 kg
C 36 x 36 in 45 Pails B A D D B A
D 44 x 44 in 4 Drums 2)
Pails only
A B D D
A B
.
C A D D
B A
PAILS: DRUMS:
665 pcs 80 pcs 1) A B
WEIGHT: WEIGHT:
26 600 lbs 36 160 lbs B A
11 970 kg 16 400 kg
A B
1)
Pallets
stacked 2 C A
high
A C

ORDERING INFORMATION

Required order information Minimum LCL (Less than container)

1) Billing address and contact info CC order is 192 pails on 4 pallets
2) Preferred port of delivery
3) Final destination address and 20 ft container order is 665 pails
contact info
4) Business or Tax ID number 40 ft container order is 1330 pails
5) Shipping Terms ( EXWORKS / CIF PC SWEDEN
Port )
6) Preferred customs broker and
freight forwarder contact info
7) P.O. (Purchase order) / Reference
number
8) P.O. issue date
SUPPLIER

PROD. NO. PROD. CODE DESCRIPTION WEIGHT VOLUME

Atlas Copco Rock Drill
89010563 9900 18 kg / 40 lbs 20 l / 4,4 imp.gal. / 5,5 US gal.
Oil, 20 L Pail
Atlas Copco Rock Drill
89010564 9901 205 kg / 452 lbs 205 l / 45,1 imp.gal. / 54,2 US gal.
Oil, 205 L Drum

COMMITTED TO SUSTAINABLE PRODUCTIVITY

We stand by our responsibilities towards our customers,
towards the environment and the people around us. We
make performance stand a test of time. This is what we call -
Sustainable Productivity

Atlas Copco Secoroc AB

Box 521, 737 25 Fagersta, Sweden
Phone: +46 223 461 00
www.atlascopco.com/secoroc