Architects

Client :
Mr. RASUL
Notes :

NOTE:
MISC 1. SOIL BEARING CAPACITY.
1. SYSTEM OF UNITS Foundations have been
6. WALLS MARKED (X) SHOULD BE LEFT 12" BELOW SOFFIT OF designed for allowable bearing
a. ALL DIMENSION , SPACINGS ETC. ARE IN INCHES. pressure of 0.95 Tons/ Sft
SLAB AND BE COMPLETED AFTER REMOVAL OF FORMWORK.
b. ALL ELEVATIONS ARE IN MM. PROPS SUPPORTING FORMWORK SHOULD NOT REST ON THESE WALLS
2. STEEL REINFORCEMENT
a. Steel Reinforcement confirming to IS
c. ALL REINFORCEMENT SIZES IN INDIAN STANDARD DESIGNATION. 456:2000 code, FE - 500 grade should be
7. BINDING BARS i,e #3-18" C/C TO TIE TOP BARS. SHOULD NOT BE used.
2. CONCRETE.
PROVIDED IN AREAS WHERE TOP BARS FROM OTHER DIRECTION General Notes :
REINFORCED CONCRETE SHALL HAVE A MINIMUM COMPRESSIVE
STRENGTH FROM 150MM CUBES AT 28 DAYS AS 3000 P.S.I. ARE ALSO PRESENT. THIS IS VERY IMPORTANT TO ECONOMISE 1. All Dimensions in ft/in.
2. Dimensions to be strictly followed
3. REINFORCING STEEL REINFORCEMENT. 3. Drawings to be Read with relevan
architectural drawings
8. TWO LAYERS OF BITUMENOUS PAPER TO BE PROVIDED ON 4. use M20 Concrete
AS PER IS 456 : 2000 M5 = 1:4:8
SUPPORTS UNDER SLABS, BEAMS AND LINTELS. M10= 1:3:6
REINFORCEMENT SHALL BE HIGH STRENGTH DEFORMED STEEL M15= 1:2:4
9. TMX Fe-500D, Fe-550D or HIGHER GRADE STEEL SHOULD BE GOT M20= 1:1.5:3
BARS i.e. TMX Fe-500, Fe-550D OR HIGHER GRADE STEEL. M25= 1:1:2
CHECKED FOR ITS YIELD STRENGTH FROM REPUTED LAB. CLEAR COVER TO MAIN
4. CONCRETE PORTECTION TO REINFORCEMENT. REINFORCEMENT:
10. ALL DRAWINGS ARE ACCORDING TO INDIAN STANDARD CODES 1.FOOTINGS : 50 mm
MINIMUM CLEAR CONCRETE COVER TO REINFORCEMENT SHALL OR RESPECTIVE COUNTRY CODES. 2.RAFT FOUNDATION.TOP : 50 mm
3.RAFT FOUNDATION.
BE AS FOLLOWING UNLESS OTHERWISE SPECIFED ON THE BOTTOM/SIDES : 75 mm
DRAWING 4.STRAP BEAM : 50 mm
5.GRADE SLAB : 20 mm
STRUTURAL ELEMENTS CLEAR COVER(MM) 6.COLUMN : 40 mm
7.SHEAR WALL : 25 mm
a. FOUNDATIONS 40 8.BEAMS : 25 mm
9.SLABS : 15 mm
b. BEAMS & COLUMNS (UP TO STIRRUPS) 25 10.STAIRCASE : 15 mm
c. ROOF SLABS 15 11.WATER RETAINING
STRUCTURES : 20/30 mm
d. STAIRS & LANDINGS 15
e. CONCEALED BEAM 20
5. SOIL BEARING CAPACITY
FOUNDATION HAS BEEN DESIGNED FOR ALLOWABLE BEARING
PRESSURE OF 1.00,0.75 & 0.5 TONS/SFT. SOIL AT CONSTRUCTION
SITE MUST BE GOT TESTED. MINIMUM DEPTH OF FOUNDATION Project :
BELOW GROUND LEVEL SHOULD BE 2'-6" FEET. HOWEVER Proposed Residential
ACTUAL DEPTH WILL DEPEND UPON BEARING CAPACITY REPORT. Building

Scale : NTS

Sheet Title
RCC NOTES

S-12