This document contains an answer key for an electricity training course consisting of multiple choice questions and fill-in-the-blank exercises. The answer key is organized by unit and session and provides the correct answers to questions on topics like electricity generation, electrical units, power, wiring components, cable installation, and cable repair. It also includes sections defining acronyms used in the course and glossary terms.
This document contains an answer key for an electricity training course consisting of multiple choice questions and fill-in-the-blank exercises. The answer key is organized by unit and session and provides the correct answers to questions on topics like electricity generation, electrical units, power, wiring components, cable installation, and cable repair. It also includes sections defining acronyms used in the course and glossary terms.
This document contains an answer key for an electricity training course consisting of multiple choice questions and fill-in-the-blank exercises. The answer key is organized by unit and session and provides the correct answers to questions on topics like electricity generation, electrical units, power, wiring components, cable installation, and cable repair. It also includes sections defining acronyms used in the course and glossary terms.
This document contains an answer key for an electricity training course consisting of multiple choice questions and fill-in-the-blank exercises. The answer key is organized by unit and session and provides the correct answers to questions on topics like electricity generation, electrical units, power, wiring components, cable installation, and cable repair. It also includes sections defining acronyms used in the course and glossary terms.
A. Fill in the blanks 1. Electrons 2. repel, attract 3. electricity 4. thermal 5. chemical reactions B. Match the columns 1. (b) 2. (c) 3. (a) 4. (d) C. Multiple choice questions 1. (b) 2. (b) 3. (d) 4. (c) 5. (b)
Session 2: Basic Units and Effects of Electric Current
A. Fill in the blanks 1. heating effect 2. Michael Faraday 3. tungsten 4. electromotive forces B. Match the columns 1. (d) 2. (c) 3. (b) 4. (a) C. Multiple choice questions 1. (a) 2. (b) 3. (d) 4. (a) 5. (b)
Unit 6.indd 94 28-05-2019 14:57:38
Session 3: Concept of Electrical Power and Energy NOTES A. Fill in the blanks 1. generation, transmission 2. Watts 3. Voltmeter 4. kilowatt hour 5. drop B. Match the columns 1. (b) 2. (c) 3. (d) 4. (a) C. Multiple choice questions 1. (a) 2. (b) 3. (b) 4. (b)
Session 4: Importance of Earthing System
A. Fill in the blanks 1. earthing 2. short circuit 3. earthing lead 4. apparatus B. Match the columns 1. (d) 2. (a) 3. (c) 4. (b) C. Multiple choice questions 1. (a) 2. (b) 3. (d) 4. (a) 5. (a)
Unit 2: Handling of Tools and Equipment
Session 1: Tools and Equipment
A. Fill in the blanks 1. rachet 2. metal 3. plastic 4. neon
ANSWER KEY 95
Unit 6.indd 95 28-05-2019 14:57:38
NOTES B. State whether the following statements are True or False 1. True 2. False 3. True 4. False
Session 2: Tools and Equipment used for Cable Laying
A. Multiple choice questions 1. (a) 2. (a) 3. (b) 4. (c) 5. (a) 6. (a) 7. (b) 8. (c) 9. (a) B. State whether the following statements are True or False 1. True 2. True 3. False
Unit 3: Electrical Wiring Components and Accessories
Session 1: Identifying and Selecting the Wiring Material and
Components A. Fill in the blanks 1. conducting, insulating, semiconductor 2. electric circuit 3. capping wiring 4. Circuit breakers B. State whether the following statements are True or False 1. False 2. False 3. True C. Multiple choice questions 1. (a) 2. (a) 3. (a)
Session 2: ICTP Switch and Distribution Board
A Fill in the blanks 1. subsidiary circuits 2. negative side 3. Phase 4. fuse B. Multiple Choice Questions 1. (a) 2. (c) 3. (c) 4. (d)
Cable Jointer−eleCtriCal Power SyStem — ClaSS Xi
96
Unit 6.indd 96 28-05-2019 14:57:38
Session 3: Workplace Health and Safety Measures NOTES A. Fill in the blanks 1. rubber 2. electric hazard 3. Cardio-pulmonary resuscitation 4. Circuit breakers B. Multiple choice questions 1. (d) 2. (c) 3. (c) 4. (d)
Unit 4: Installation of Cables
Session 1: Laying of Underground Cables A. Fill in the blanks 1. Murray loop 2. 240 Amps 3. High Tension (HV) 4. Erection stool
Session 2: Laying of AB Cables
A. Fill in the blanks 1. Jointing 2. Over current 3. Aerial Bundled conductor B. Multiple choice questions 1. (a) 2. (a) 3. (a), (c) and (d) 4. (a) C. Match the columns 1. (c) 2. (a) 3. (b)
Unit 5: Repairing of Cable Joints
Session 1: Electrical Cable Jointing Methods
A. State whether the following statements are True or False 1. False 2. True 3. True
ANSWER KEY 97
Unit 6.indd 97 28-05-2019 14:57:38
ACRONYMS AC: Air Conditioner AC: Alternating Current ADC: Analog-to-Digital Converter BIS: Bureau of Indian Standards BS: British Standards CEA: Central Electricity Authority CT: Current Transformer CTR: Current Transformer Ratio CTS: Cabe Tyre Sheath CVT: Capacitor Voltage Transformer DC: Direct Current EEPROM: Electrically Erasable Programmable Read-only Memory ELPD: Earth Leakage Protective Device ELT: Earth Leakage Temper GI: Galvanised Iron HT: High Tension HV: High Voltage IEC: International Electrotechnical Commission KCL: Kirchhoff’s Current Law KVL: Kirchhoff’s Voltage Law LCD: Liquid Crystal Display LED: Light-emitting Diode LT: Low Tension LV: Low Voltage MCB: Miniature Circuit Breaker MDB: Main Distribution Board MDI: Maximum Demand Indicator MRI: Meter Reading Instrument PD: Potential Difference PT: Potential Transformer PVC: Polymerising Vinyl Chloride REV: Revolution RST: Referred for Phase Sequence
Unit 6.indd 98 28-05-2019 14:57:38
RTC: Real Time Clock NOTES SWG: Standard Wire Gauge T&P: Tools and Plants TRS: Tough Rubber Sheath TV: Television VIR: Vulcanised Indian Rubber VT: Voltage Transformer
ACRONYMS 99
Unit 6.indd 99 28-05-2019 14:57:38
GLOSSARY
AC Supply: AC stands for alternating current. In an AC circuit
the current changes direction in a cyclic manner. In India, the AC frequency is 50 Hz. Ammeter: a device used to measure the current flowing through a circuit. Ammeter is always connected in series. Battery: combination of two or more cells Conductor: is the type of metal which allows the electrical current to flow through it. DP: is erected in mid span of electrical transmission line for sport so that no deflection of single pole and wire take place. Galvanometer: current indicating device Heating element: a resistance which generates heat HT line: High-tension line is a high voltage line. High tension or HT0 supply is applicable for bulk power purchasers who need 11 kilo-Volts or above. LT Line: is a low-tension line is a low voltage line LT supply is of 400 Volts for three-phase connection and 230 Volts for single-phase connection in our country. Potentiometer: is an electric element that has a variable resistance. It is used to change the potential difference across the circuit. Resistor: it resists the flow of a current and thereby produce heat Stay: is used to sport the angular poll and end pole. Stay is mainly used to hold the tension of conductor or cable. Stringing: is the term used for tightening and pulling the cables on poles. Switch: electrical current flow controlling device Transformer: an element used to step up or step down the voltage. In an ideal transformer energy is conserved. So, if the voltage goes up the current goes down and vice versa. Voltmeter: a device used to measure potential difference. Voltmeter is always connected in parallel.
Unit 6.indd 100 28-05-2019 14:57:38
LIST OF CREDITS
Power Sector Skill Council, NSDC, New Delhi
All the figures have been re-casted, redrawn from the book of Consumer Energy Meter Technician Manual, 2016 of the Power Sector Skill Council.
Images other than these have been taken from the following sources:
