Scribd
Upload
64 views2 pages

S. G. Balekundri Institute of Technology: Department of Mechanical Engineering

The document is an assignment for a Design of Machine Elements course. It contains 4 questions related to stresses and failure theories for machine components under different loading conditions. The questions cover topics like determining normal and shear stresses on an inclined plane for a tensile load, stresses on a c-clamp, impact stress induced in a rod due to axial impact loading, and determining the diameter of a shaft subjected to varying twisting moments. The assignment provides information on the course code, coordinator, date, questions with their corresponding course outcomes, revised bloom's taxonomy levels, and program outcomes.

Uploaded by

vaijanath patil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
64 views2 pages

S. G. Balekundri Institute of Technology: Department of Mechanical Engineering

The document is an assignment for a Design of Machine Elements course. It contains 4 questions related to stresses and failure theories for machine components under different loading conditions. The questions cover topics like determining normal and shear stresses on an inclined plane for a tensile load, stresses on a c-clamp, impact stress induced in a rod due to axial impact loading, and determining the diameter of a shaft subjected to varying twisting moments. The assignment provides information on the course code, coordinator, date, questions with their corresponding course outcomes, revised bloom's taxonomy levels, and program outcomes.

Uploaded by

vaijanath patil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

S. S.

Education Trust ‘s CET Code: E-175 (UG)/T-942 (PG)

S. G. BALEKUNDRI INSTITUTE OF TECHNOLOGY


Shivabasavanagar, Belagavi- 590 010, Karnataka- India
Office: 0831-2407172, 2554559 Fax: 0831-2407152Website: www.sgbit.edu.in
Department of Mechanical Engineering
Email: [email protected], Department Extension: 511
Form No: SGBIT/Exam/2019-20/2 Revision: R1w.e.f: 27/9/2019
ASSIGNMENT (CBCS FORMAT)
B.E (Mechanical Engineering)
(Version 1)
Course Code:17ME54 Course: DESIGN OF MACHINE ELEMENT-I Max.Marks: 10
Semester & Course Coordinator :Prof. V. V. Patil/Prof. Date: 22.08.2019
Division:5A,B P. S. Shiraguppi

Q. Questions
CO RBT PO
NO.
A rectangular bar of 50mm*25mm is subjected to a
tensile load 25KN. Determine normal and shear stresses
1. 01 L2 1,2,3
on plane 300 with the vertical. Also calculate the
magnitude and direction of maximum shear stress.
Determine normal stresses at extreme fibre on the c/s A-
A of a c-clamp loaded as shown.

2. 01 L3 1,2,3

Derive an equation for impact stress induced in a rod


due to the axial impact load “W” dropped through a
3. 01 L2 1,2,3
height “h” on to the collar attached at the free end of the
rod.
A hot rolled shaft is subjected to twisting moment which
varies from 540 N-m to -45 N-m. Find diameter of shaft,
theoretical stress conc. factor may be taken as 1.652.
4. 02 L3 1,2,3
Given σ u= 520MPa, σ y= 300 MPa, FOS= 1.8, q= 0.9,
size factor= 0.85, surface finish factor=0.89. Take
endurance limit as half of the ultimate strength.

COURSE OUTCOMES (COs)


C314. Describe the design process, by analyzing the behavior of machine
1 components under static load.
C314. Analyze the behavior of machine components under impact and fatigue
2 loading using failure theories.
C314. Design of shafts, joints and couplings.
3
C314. Design of riveted and welded joints.
4
C314. Design of threaded fasteners and power screws.
5

REVISED BLOOMS TAXONOMY LEARNING LEVEL (RBT)


L1: Remember L2: L3: Apply L4: Analyze L5: L6: Create
Understand Evaluate

PROGRAM OUTCOMES (POs)


1 Engineering Knowledge 5 Modern tool usage 9 Individual and Team-
Work
2 Problem Analysis 6 Engineer and Society 1 Communication
0
3 Design / Development 7 Environment and 1 Project Management and
Solutions Sustainability 1 Finance
4 Conduct Investigations of 8 Ethics 1 Life-long Learning
Complex problems 2

Course Coordinator Dept IQAC Coordinator H.O.D

You might also like