Scribd Logo
Upload

Welcome to Scribd!

  • 199 views

    ASTER 12G2F - Data Sheet: Structure

    Uploaded by

    Koen Bidlot
    This document provides specifications for an ASTER 12G2F conveyor belt material. It is made of 2 plies of polyester fabric with a rigid weft and has a total thickness of 0.22 inches. It has a top PVC cover that is 0.16 inches thick with profile patterns and an internal PVC bottom cover. The belt material has a minimum breaking load of 685.21 lbf/in and works at temperatures between 5 to 212 degrees Fahrenheit. It also lists splicing parameters and recommendations for installing the belt material.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ASTER 12G2F - Data Sheet: Structure

    Uploaded by

    Koen Bidlot
    199 views1 page
    This document provides specifications for an ASTER 12G2F conveyor belt material. It is made of 2 plies of polyester fabric with a rigid weft and has a total thickness of 0.22 inches. It has a top PVC cover that is 0.16 inches thick with profile patterns and an internal PVC bottom cover. The belt material has a minimum breaking load of 685.21 lbf/in and works at temperatures between 5 to 212 degrees Fahrenheit. It also lists splicing parameters and recommendations for installing the belt material.

    Original Title

    ASTER-12G2F

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for an ASTER 12G2F conveyor belt material. It is made of 2 plies of polyester fabric with a rigid weft and has a total thickness of 0.22 inches. It has a top PVC cover that is 0.16 inches thick with profile patterns and an internal PVC bottom cover. The belt material has a minimum breaking load of 685.21 lbf/in and works at temperatures between 5 to 212 degrees Fahrenheit. It also lists splicing parameters and recommendations for installing the belt material.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    199 views1 page

    ASTER 12G2F - Data Sheet: Structure

    Uploaded by

    Koen Bidlot
    This document provides specifications for an ASTER 12G2F conveyor belt material. It is made of 2 plies of polyester fabric with a rigid weft and has a total thickness of 0.22 inches. It has a top PVC cover that is 0.16 inches thick with profile patterns and an internal PVC bottom cover. The belt material has a minimum breaking load of 685.21 lbf/in and works at temperatures between 5 to 212 degrees Fahrenheit. It also lists splicing parameters and recommendations for installing the belt material.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    ASTER 12G2F - Data Sheet

    STRUCTURE

    Total Thickness 0.22 in.


    Nº of plies 2
    Fabric Polyester
    Weft Rigid
    Weight 0.86 lbs/ft2
    Constant Temp. ºF 23 / 176
    Intermittent Temp. ºF 5 / 212
    Top cover PROFILES APPLICATION
    Thickness 0.16 in. Profiles on top cover Yes
    Material PVC Profiles on bottom cover Yes
    Colour Green 00 Runer sidewalls No
    Surface Pattern G2
    Hardness 55 ShA
    SPECIAL CHARACTERST.
    Internal cover
    Antistatic Top Cover
    Material PVC
    Bottom cover
    Thickness 0 in.
    Material -
    Colour Natural
    Surface Fabric
    Hardness 0 ShA

    SUPPORT SURFACE

    TENSIONS lbf/in Slider bed Yes


    Breaking load 685.21 Rollers Yes
    Working load 1% elongation 45.68 Troughed application No
    Max. load at 1.5% elong. 68.52
    FRICTION COEFF. BOTTOM COVER

    MIN. DRUM DIAMETER in. On steel Din/Est. 0.16 / 0.23


    On wood Din/Est. 0.13 / 0.21
    Flexing [F] 1.77 On plastic Din/Est. 0.14 / 0.21
    Back flexing [C] 2.76

    REMARKS

    FASTENERS Longitudinal splice Yes


    1 , MR1 , RS-62 , UX1
    Max. manufacturing width 78.74 in.
    Last Modified 11/03/2010

    SPLICING PARAMETERS (Stratified fibreglass sheets, not metal)

    Pressure Sup. Temp. Inf. Temp.


    Splice Min time Top cov. Flomil / Film Intern. Flomil Sheet
    PSI ºF ºF
    DE (Recommended) 17.78 347 347 8 AVR00G IVR00 1
    DG 17.78 347 347 8 AVR00G IVR00 3

    The splice parameters are for orientation only as they depend on the type of press and the thickness of the sheets used. We recommend carrying out a trial run with pieces of the same
    belt before splicing the belt itself.
    Time starts when the press has reached the stated temperature.

    You might also like