WASTEWATER TREATMENT PLANTS IN ISO CONTAINERS

AS–ISO MBR Type Range of wastewater treatment plants is intended for the treatment of municipal wastewater.
The treatment plant use aerobic treatment technology together with membrane separation of activated sludge from cleaned water. The plants
are designed to achieve the best cleaning performance. The water cleaned in this way can be further reused as irrigation or service water.

PROCESS DESCRIPTION

Wastewater is pumped into the mechanical pre-treatment

compartment (A), where floating and sedimentable solids
of diameters larger than 1 mm are removed. From the mechanical
pre-treatment compartment, the wastewater stream flows through
the overflow to the balancing reservoir and from there it is pumped
into the activation tank. In the activation tank (B), impurities are removed
under oxic conditions. Thus, if needed, this space can be used
alternately under oxic and anoxic conditions or it can be used as
an accumulation tank, as necessary. From the activation tank, the water
stream is pumped with a submerged pump (E) into the filtration tank (C), which
accommodates membrane modules (D). At the same time, the filtration tank is used
for biological treatment of wastewater and ultrafiltration through the membranes.
The treatment plant is provided with an aeration system, which is used for wastewater
aeration and, (in the filtration tank), also for cleaning of the membrane modules. CE
RTIFICATE
D

★ ASIO ★
01

UA
Q

LIT Y 90
ISO
ADVANTAGES OF AS–ISO MBR

• Cleaned water can be further used as irrigation PRACTICAL APPLICATIONS OF AS–ISO MBR
(service) water
• Compact mobile design for wastewater treatment • Low discharge concentrations of impurities in cleaned water enable
• The design includes all operating sections to use this water for irrigation purposes or to discharge it in protected
– all included in the price areas, or for wastewater treatment applications in tourist-intensive
• Insulated, lockable container areas, national parks, etc.
• Customer support & services • The plant meets temporary requirements for wastewater treatment such
• Only minimum of builder’s works in connection as seasonal accommodation facilities, camps, tourism localities, etc.
(building preparations) are needed • Confined conditions, restricted space – both external and internal
• Easy handled and reliable operations • Low capital expenditures are required for the building part of the
• Aboveground self-supporting structure wastewater treatment plant
• Possibility of on-site chemical cleaning of membranes
printed 09/2014

ASIO Ltd. Kšírova 552/45, 619 00 Brno, Czech Republic

Phone: +420 548 428 111
E-mail: [email protected], www.asio.cz www.asio.cz
 Parameter Unit AS–ISO MBR 110 AS–ISO MBR 220 AS–ISO MBR 330
Capacity PE 110 220 330
Average daily flow (Q24) m3/d 16,5 33,0 49,5
Maximum daily flow (Qd) m3/d 24,8 49,5 74,2
BOD – inlet kg/d 6,6 13,2 19,8
COD – inlet kg/d 13,2 26,4 39,6
Suspended solids - inlet kg/d 6,1 12,1 18,2
Number of membrane unit - 2 4 6
Dimensions of WWTP mm 6 058 x 2 438 x 2 591 12 192 x 2 438 x 2 591 12 192 x 2 438 x 2 591
Max. weight kg 5 000 8 100 8 200

Parameter-values CODCr (mg/l-1) BOD5 (mg/l-1) Insoluble substances (mg/l-1)

Standard equipment „p“/“m“ 70/90 5/10 3/5
*These values are also confirmed by the achieved measurement results of our treatment plants

INSTALLATION OF THE TREATMENT PLANTS

The treatment plants are installed on a concrete base plate with prepared connections of pipeline systems. Except the connection of the power
supply and possibly the control elements of adjacent structures, the treatment plants do not require any electric installation work.
The wastewater treatment plant is put in operation by the supplier or an authorized service organization. With regard to the installation of the
technology in ISO containers, the treatment plants are transportable both by truck and by boat. In the place of installation, the openings for
pipe passages and ventilation openings must be cut out of the walls of the ISO containers.

MAINTENANCE

Maintenance is carried out by authorized service centres.

Maintenance of the membranes and the setting of the extraction of excess sludge is carried out as necessary, in accordance with the operating
rules, by trained operators of the wastewater treatment plant. The membranes are generally cleaned or replaced once every half a year.

ŘEZ A–A
RTIFICATE
CE

D
★ ASIO ★

01
UA

Q
LIT Y 90
ISO

LEGEND:
A – Mechanical pre-treatment
B – Activation tank
C – Filtration tank
D – Membrane filtration unit
E – Submerged pump for internal
recirculation
F – Aeration elements
G– Blower - activation tank
H– Blower - filtration tank
I – Pumps of treated water
J – Switch board

GUARANTEE

WWTP technology – 24 months; tanks – 5 years.

DOCUMENTATION

Together with the purchase agreement, the customer will receive the Operating and Installation
Documentation. The customer will receive the remaining WWTP documentation together with the
guarantee certificate (Operations Diary, Operating Instructions, and Draft of the Operating Rules).

FOR MORE DETAILED INFORMATION, PLEASE ASK FOR PROJECT AND INSTALLATION DOCUMENTS!