Scribd
Upload
30 views1 page

Innovative Technology For The Environment: Project: Customer: Application: Capacity: Input: Data

This document discusses a wastewater treatment project for a textile mill in Germany using MaxFlow membrane modules. The project involved treating wastewater from the mill's desizing process, which has a very high chemical oxygen demand (COD) content. Eight A40 MaxFlow membrane modules with a total filtration area of 320 square meters were used to reduce the COD content from an input level of up to 10,000 mg/L to an effluent level of no more than 200 mg/L. The treated water was then reused by the mill.

Uploaded by

Yoo Boyyoo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views1 page

Innovative Technology For The Environment: Project: Customer: Application: Capacity: Input: Data

This document discusses a wastewater treatment project for a textile mill in Germany using MaxFlow membrane modules. The project involved treating wastewater from the mill's desizing process, which has a very high chemical oxygen demand (COD) content. Eight A40 MaxFlow membrane modules with a total filtration area of 320 square meters were used to reduce the COD content from an input level of up to 10,000 mg/L to an effluent level of no more than 200 mg/L. The treated water was then reused by the mill.

Uploaded by

Yoo Boyyoo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Innovative Technology for the Environment Compact

Wastewater Treatment

Ma xFlow
Membrane Modules

Treatment
of Digestate
Wastewater Treatment
with Ma xFlow Membrane Modules:
Industrial Wastewater Water Treatment

Project: Wastewater Recycling in Textile Industry


Customer: Silk Weaving Mill Pongs, Mühltroff, Germany
Application: Industrial Wastewater Treatment
Capacity: 1,100 – 5,000 population equivalent
Input: Wastewater from desizing of cotton and synthetic

Data: Turnkey project of a MBR plant for the treatment


of wastewater used in textile manufacturer (desizing
process) including managing the approval procedure.
The influent has a very high COD content and is
re-used after treatment.

COD Input up to 10,000 mg/L


COD Effluent ma x. 200 mg/L
Membrane Modules A40
Number of Membrane Modules 8 pcs
Filtration area 320 m²
Pore size 0.4 µm

A3 Water Solutions GmbH · Magdeburger Straße 16a · 45881 Gelsenkirchen · Germany


Tel:+49(0)209-980 99-809 · Fa x:+49(0)209-980 99-801 · [email protected] · w w w.a3-gmbh.com

You might also like