Excess Flow Valves For Vapor or Liquid A2137 Series and 2139 Series

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Excess Flow Valves for Vapor or Liquid

A2137 Series and 2139 Series

Application
Designed especially for filling, withdrawing or vapor equalizing in
half and full coupling installations. Ideal for container service where
welded-in dip pipes are not provided. For vapor use, mount in the
bottom opening with a threaded dip pipe. For liquid use, mount in the
top opening with a threaded dip pipe. These may also be installed in
pipe lines provided the connection is made to the male inlet thread
and not the female dip pipe connection.

Features
• Precision machined.

• Cotter pin helps prevents loss of spring retainer due to vibration in


service.

• Stainless steel spring provides consistent closing flow and long


service life.

• Generous flow channels provide low pressure drop.

A2137
Typical Installations

Materials
A2137 Series
Body.............................................................. Cadmium Plated Steel
Disc................................................................ Cadmium Plated Steel
Stem.......................................................................... Stainless Steel Container Service Pipe Line Service
Spring........................................................................ Stainless Steel
F Guide............................................................. Cadmium Plated Steel

2139 Series
Body........................................................................................ Brass
Disc.......................................................................................... Brass
Stem.......................................................................... Stainless Steel
Spring........................................................................ Stainless Steel
Guide....................................................................................... Brass

PRODU
GO C

10
RE

TS
Y
10

NT

EA
Y

R WA R R A

NOTE: Multiply flow rate by .94 to determine liquid butane flow


and by .90 to determine liquid anhydrous ammonia flow.

Ordering Information
Approximate Closing Flows***
A B D Vapor SCFH (Propane)
Inlet Connection Outlet Connection C Effective Length Liquid
Part Number NPT F. NPT Wrench Hex Flats (Approx.) (GPM Propane) 25 PSIG Inlet 100 PSIG Inlet
A2137 2” Male and 1¼” 50 10,000 17,000
2”* 27⁄16” 19⁄16”
A2137A Female 70 14,000 25,000
2139 3” Male and 2” 125 26,500 46,000
3”** 3½” 13⁄4”
2139A Female 160 32,700 57,200

* 1¼” F. NPT Dip Pipe Connection


** 2” F. NPT Dip Pipe Connection
*** Based on horizontal installation of excess flow valve. Flows are slightly more when valves are installed with outlet up; slightly less when installed with outlet down.

F14 100 RegO Dr. Elon, NC 27244 USA www.regoproducts.com +1 (336) 449-7707

You might also like