Sontrach

Client: _____________ SLB designer: ________ Verified: _________ Date: 3/16/2009

___________
SWT Service Delivery Procedure
Revision 1.0 Well: _____________
A1-65/02 Sign: ______________ Sign: ___________ Client app:___________
Step number SWT SDP Help File

15 16 17 18
Identify /
Process

Review Finalize Well Review Well

Prepare
Page-1 Operating Test Design Test Design
Contingency
Procedures Package Package
Plans
FSM, EIC,
FSM, EIC, FSM, EIC, Client
Output / Action Input process or Personnel level

FSM, EIC, SQC,

FE/FS, Client, SQC, Review / edit approved /
required

FE/FS Supervisor,
3 rd Parties Supervisor signed
Client, 3 rd
Design/Planning

Parties Yes
Architest Job Specific
Review Pressure
Generic Report HARC Well test Design No
InTouch Operations
Contingency Package
contents Manual Contingency Design package
Procedures
document

Checklist
HAZOP P&ID / Procedures Sign-Off Sheet
3 rd Party Job Specific (if applicable) Layout
Exemption
Operating Test Program HARC
Request
Procedures
Contingency
Procedures
Location Well Test Design Validated Well Test
Document

Specific Reviewed Test Package Design

Equipment Updated
Operating Program
manuals HARC
Procedures
WCP/DST/SDP-106

19 20 21 22 23 24 25
Verify all SLB & 3 rd Verify SLB & 3 rd Prepare
Process

Assign Verify assigned Verify Well

party equip. is party personnel Equipment
Equipment SWT Equipment Test Container Pre-Job Meeting Page-3
available, certified are available and Load-Out
(inc. 3 rd Party) are green tagged Contents
& mantained competent Sheets
Supervisor, FSM/EIC, Test
EIC, Supervisor, FSM, EIC,
Output / Action Input process or Personnel level

FSM, EIC, Supervisor, FS, FE, supervisor, all job

SFE/ FS2 + SFE/ FS 2+, Supervisor,
Supervisor assigned personnel, 3 rd
required

FE or FS Foreman or
3 rd Parties 3 rd Parties
Dispatcher parties
Job preparation

Packing List Packing List

Packing List Certification LMS
Level 5 Level 7 Well Test
Level 4 Check List Crossover List Test Program
Design Package
FIT / TRIM 3 rd Party /
document

Fixed Asset sheets Consultant CV’s MSDS & DG

List / RITE Packing List Ready Box Contingency Procedures
Documents
Rig Book Records of Level 6 Check List
Personnel Examples
pressure testing
Crossover Planning
Update RITE Certification Crew Task
List Pre-job
Package Lifting Checklist Assignment /
Meeting
Delegation
Document

Crew Signed-off Check Sheet

Competency checklists
Packing List Packing List Packing List
Verification Load-Out Sheet
Level 5 Level 6 Level 7
 Sontrach
Client: _____________ SLB designer: ________ Verified: _________ Date: 3/16/2009
___________
SWT Service Delivery Procedure
Revision 1.0 Well: _____________
A1-65/02 Sign: ______________ Sign: ___________ Client app:___________
Step number SWT SDP Help File

26 27 28 29 30 31 32 33
Process

Client / Rig Visual Check Check for Review Approve new Effective
Any Yes Crew Safety
Page-2 Management of Equipment Well Data complete SDP Through Communication
changes? Meeting
Introduction at Well-Site Changes SDP MOC Process & Handover

Testing Testing
Testing Testing Testing Testing Crew,
Output / Action Input process or Personnel level

Testing Supervisor, Supervisor,

Supervisor, Supervisor, Supervisor, Rig Crew
Supervisor client, FSM, Chief
required

Client client client involved

No EIC Operators
Job Execution

Certification
Crossover List
Packages Local Job
Revised SDP /
Job HARC
Well Test WTDP Updated Daily
Questionnaire
document

Design Load-Out List Fax &

Copy of SDP JSA Template
Package Handovers
ConfirmRig MOC Process
Hard Copy of SDP Interfaces QHSE-S010
SIPP Guidelines Shift Handover
Template
Daily Morning Fax Communicate Confirmed / Changes to MOC in Mechanical Lifting
Document

Template with base for Updated Job SDP ready for QUEST QHSE-S013
additional Questionnaire approval
Job / Operation
equipment Updated JSA
Status Update

34 35 36 37 38 39
Rig-up
Process

Rig-up Pressure Test

Equipment as Perform Pre- Record Events &
Instrumentation SWT
per P&ID / Flow JSA Manual Readings
as per P&ID Equipment
Layout Review Design
& Job checks SLB personnel to be
present at the Choke
Output / Action Input process or Personnel level

for SWT Testing Crew, All personnel

Testing Crew Testing Crew Testing Crew Manifold and Separator at
Cementer involved
required

all times whilst flowing

Job Execution

well.

JSA Standard Reading Sheets

Updated JSA Lab cabin must be
Calibration & P&ID Pre-Flow manned at all times with
Instrumentation Checklist relevant alarms set in
CleanSep Reading Sheets
document

Checks Pressure Testing DART.

P&ID / Layout / Jobs to do List Sequence
Boom Rig-up Foxboro Pre-Flow Sequence of Events
Diagram Barton Safety Template
Thickness Meeting
ESD Pilots Meter Factor Sheet
Testing Page-4
FOH 2
ESD Stations
Events & Readings
Document

PSV Readiness to
Supervisor sign- Pressure Test Charts flow the well
Calibration
off Rig-up is as Signed-off & Completed Meter
Charts
per P&ID Jobs Listing Factors
 Sontrach
Client: _____________ SLB designer: ________ Verified: _________ Date: 3/16/2009
___________
SWT Service Delivery Procedure
Revision 1.0 Well: _____________
A1-65/02 Sign: ______________ Sign: ___________ Client app:___________
Step number SWT SDP Help File

40 41 42 43 44
Process

Flush & Rig-

Clean-Up Flow Main Flow Periods Build-Up Crew Safety
Page-3 Down Test
Period (Drawdowns) Period Meeting
Equipment

Testing Crew,
Output / Action Input process or Personnel level

Testing Crew Testing Crew Testing Crew Rig Crew Testing Crew
required

involved
Job Execution

Test Program
SWT HARC
Test Program Test Program Updated JSA
SDP General
Contingency Information for JSA Template
General
document

Procedure Main Flow General

Information for Periods Information for Crossover List
Clean-Up
Build-Up
Period Manual Calc Period SIPP Guidelines Equipment
Stable Conditions Ready for
(Well cleaned up) Accurate Data Mechanical Lifting Backload
Elimination of Flow Period
QSHE-S013
Document

Foreign Fluids/ Objectives Accurate Data

Solids from Flow Period PVT Samples Completed
Updated JSA Crossovers
Wellbore & Perfs Objectives Completed Packed

45 46 47 48 49 50
Perform Well-
Process

Complete Enter Jobs / Runs in

Site Post-Job Internal SLB Post- Client Close-
Backload RITE, Quest & InTouch
Meeting with Job Meeting Out Meeting
Manifest
Client
FSM, EIC, SQC, Client, FSM,
Testing
Output / Action Input process or Personnel level

Testing Testing supervisor, EIC,Sales,

Supervisor, Testing Supervisor File hardcopy of SWT
Supervisor all job assigned Testing
required

Client SDP, File Electronic

personnel. Supervisor
Copy and WT Report
Job close out

Field Ticket Load Out Completed Completed on server.

Packing List RIR / SQ
Light Templates RQC Form FTL ticket Entries in Well Test
Report Archive all reading
Quest
sheets and charts as
Client satisfaction
document

Lifting Completed part of the SWT SDP

rating form RITE Post job
Checklist SWT SDP
meeting
InTouch Best
Information report
Practices,
MSDS & DG entered in RITE / Crew Well Test Testing Supervisor
Signed field ticket Lessons
Documents Quest / InTouch Appraisals Report Finalized Post Job
Learnt
Meeting Report
Document

Check for equipment Including a

damage & ensure client Backload List Continuous
Post job meeting report
witnesses and signs Improvement Plan
Updated RITE system
where applicable.
 Sontrach
Client: _____________ SLB designer: ________ Verified: _________ Date: 3/16/2009
___________
SWT Service Delivery Procedure
Revision 1.0 Well: _____________
A1-65/02 Sign: ______________ Sign: ___________ Client app:___________

Job Job
Design Execution
Page-1 Page-3 Review Design & Job checks for SWT

Job Job Link to Surface Well Test Equipment Guidelines

Preparation Close Out
Page-2 Page-4

ARCHITEST must be used

in every Design process
of a SWT operation

Heater / Steam
Design/Planning

Flowhead Choke Manifold Pump Evergreen

Exchanger
Specifications

Flexible Line ESD Sand Filter Separator Tank

SFCU CSRU
SFDP SFU

InTouch Relevant SWT Technical Alerts that should be Reviewed

prior to any Upcoming Job

Line Securing Guy Line Splices Evergreen Burner Head

PCV Controller Hazard EEx d Junction Boxes & Cables 15K C25 Piping
Burner Boom Failure Flowheads 15K Piping Color Code
Air Driven Pumps Flare Boom Collapse In-Line PSV Selection
SWT Service Delivery Procedure
Packing List Concept
Revision 1.0

The “Packing List” concept is central to the development of the SDP. At a basic level it refers to the continual updating and modification of the equipment planning
process. The following table identifies the level of detail expected at each stage of the planning process and refers directly to distinct steps within the SDP

STAGES DESCRIPTION

STEP 8 – Pre Selection of SWT Equipment

Level 1 This list will be comprised of the equipment set you feel is most suitable to perform the job the client has requested. It will
largely be governed by your fixed asset listing and used as an input to the Architest simulations.

STEP 10 – Final SWT Equipment Selection

This will be a confirmed SWT equipment list following the Architest simulations. It is essentially a wish-list at this early stage
Level 2 and does not take into account equipment availability or other related issues. At this point, the packing list is solely concerned
with SLB assets.
Packing List Development Stages

STEP 11 – Review 3 rd Party or other relevant equipment

Level 3 The packing list is modified at this stage to include 3 rd party equipment. This will vary in scope according to the type of job but
may include: compressors, boiler, sand detection, chemicals, water deluge and a number of other services.

STEP 13 – Prepare Layout Diagram and P&ID

Level 4
At this stage, the P&ID and Layout diagram are available so we can start to refine our supplementary equipment needs such
as piping and hoses.

STEP 18 – Assign equipment (inc. 3rd Party)

Level 5 Now the equipment has been assigned, serial numbers are attributed to the packing list for both SLB and 3 rd party assets.
Crossovers required for SWT equipment can be identified as well as any interfaces required between our equipment and 3 rd
party or rig fixtures.

STEP 19 – Perform necessary maintenance on assigned equipment

Level 6 This stage delineates the successful completion of the necessary maintenance on the assigned equipment . All equipment is
now at an operational status level.

STEP 20 – Verify all SLB & 3rd Party Equipment is available with certification
Level 7 The packing list is now complete. It lists all the equipment required to perform the well-test, comprising both SLB and 3 rd party
assets, with current certification, which have been identified, assigned, maintained and are now ready for dispatch.
 Job File Index
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Index

SWT Service Delivery Procedure

1- Design and Planning

1.1- Communication Log

1.2- Communication Details
1.3- Job Questionnarie
1.3.1- Test Objectives
1.3.2- Well Information
1.3.3- Work Scope
1.4- Resources
1.4.1- Fixed Asset List
1.4.2- Personnel List
1.5- HARC
1.6- Rig Visit Report
1.6.1- Rig Visit Checklist
1.6.2- Rig Layout Drawing
1.6.3- Rig Certification Records
1.6.4- BOP Stack Drawing & Wear Bushing Info
1.6.5- Deck Loading Diagram
1.7- King Post & Boom Installation Plans
1.7.1- Design Drawings, Installation & Deployment Procedures etc.
1.8- Project Specific Items
1.8.1- Manufacturing List
1.8.2- Boom Rigging List
1.9- Selection of SWT Equipment
1.9.1- Packing List
1.10- Architest Simulations
1.10.1- Architest Report
1.11- 3rd Party Equipment
1.11.1- Communications Document
1.11.2- 3rd Party Packing List
1.12- Personnel Planning
1.12.1- Personnel List
1.13- Drawings
1.13.1- Process & Instrumentation Diagram (P&ID)

Prepared by: Reviewed by FSM/EIC: Page WTS-SWT-SDP-043 Rev-1.0

1 of 3

1.13.2- Layout Diagram

 Job File Index
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02
1.13.3- Hazardous Areas Diagram
1.14- Job Specific Procedures
1.14.1- Location (or Job Specific) Operating Procedures
1.14.2- Job Specific Contingency Procedures

1.15- Well Test Design Package

1.15.1- HAZID / HAZOP Proceedings
1.15.2- Safety Analysis Tables
1.15.3- WTDP Contents Checklist
1.15.4- WTDP Sign-Off Sheet

2- Job Preparation

2.1- Checklists
2.1.1- Ready Box Checklists
2.1.2- Crossover List
2.1.3- Lifting Checklist
2.1.4- Pre-Job Meeting Checklist
2.2- Certification
2.2.1- Pressure Certification File (separate folder)
2.2.2- Lifting Certification File (separate folder)

2.3- Logistics
2.3.1- Load Out Lists
2.3.2- DG & MSDS Documents

3- Job Execution

3.1- Management of Change

3.1.1- Management of Change - Requests & Approvals

3.2- Safety
3.2.1- Operation Specific JSA's
3.2.2- Pre-Flow JSA

3.3- Communications
3.3.1- Daily Fax Records
3.3.2- Shift Handover Records

3.4- Pre-Flow Operations

3.4.1- Jobs-to-do Listing
3.4.2- Calibration & Instrumentation Checks
3.4.3- Thickness Testing
3.4.4- Pressure Test Charts
3.4.5- Meter Factors
3.4.6- Pre-Flow Checklist

Prepared by: Reviewed by FSM/EIC: Page WTS-SWT-SDP-043 Rev-1.0

2 of 3

3.5- Flowing Operations

3.5.1- Sequence of Events
3.5.2- Reading Sheets
 Job File Index
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02
4- Job Close-Out

4.1- Wellsite Post Job Meeting

4.1.1- Signed Field Ticket
4.1.2- CSR (Client Satisfaction Rating)
4.2- Equipment & Logistics
4.2.1- Backload List
4.2.2- Post Job Maintenance List & Equipment Status Report
4.3- Post Job Meeting
4.3.1- Well Test Report
4.3.2- RQC (Report Quality Control)
4.3.3- Crew Appraisals
4.3.4- RIR / SQ Reports
4.3.5- Lessons Learned
4.3.6- Post Job Meeting Report
4.4- Client Close Out Meeting
4.4.1- Client Post Job Meeting Report (or minutes)
4.4.2- Continuous Improvement Plan

Prepared by: Reviewed by FSM/EIC: Page WTS-SWT-SDP-043 Rev-1.0

3 of 3
 Communication Log
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Ref Number Date Contact Name Subject

DST-1-PF Test.E Rabah Barah Programe for DST#1 test
DST-2-PF Test.E Rabah Barah Programe for DST#2 test
DST-3-PF Test.E Rabah Barah Programe for DST#3 test
DST-3A-PF Test.E Rabah Barah Programe for DST#3A test

Prepared by: Reviewed by: Page WTS/SDP-030 - Rev-2.1

of
 Communication Details
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Topic Discussed:

All commnucation Details attached in SDP folder

Actions:
Date Due Assigned to Description

Comments:

Communication Log Number: Prepared by: Reviewed by: WTS/SDP-031 - Rev-2.1

 Job Questionnaire
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Objectives:

Communication
List all contacts, Manager, FSM, Engineer, Drilling Eng, Reservoir Eng, Rig, logistics and other providers as needed
Company name
Name
Title
Phone
Fax:
Cell
Email

Company name
Name
Title
Phone
Fax:
Cell
Email

Rig Information
Rig Type Rig Spudding Date Equip. Delivery Point
Rig Location Equip. Loading Date Personnel Departure

Reservoir
Formation Pressure psi Max. BHT DegF Type (Oil-Gas)
Max. Shut-in WHP psi Flowing WHP psi Flowing WHT DegF
Formation Lithology Permeability mD %
Max Gas Rate MMscf/d Gas SG (Air=1) Hydrates Expected
Max Oil Rate m3/d Oil SG (60 degF) GOR / CGR
Pour Point DegF Oil Viscosity (cP) Foaming Expected
Expected Water Cut % Max Water Rate m3/d Water SG (60degF)
Salinity Emulsions Expected Sand Expected
Max Solids Rate H2S ppm CO2 %

PVT Information Available: Yes No

Surface Equipment Information

When can the rig be visited? Is chemical injection required? (Details?)
Is Coiled Tubing planned through flowhead? Is the rig equipped with booms? (Length?)
Is Slickline planned through flowhead? Burn effluents, flow to tank or pipeline?
Is Electric-Line planned through flowhead? Are 'Green Burners' or 'Evergreens' reqd?
Are long bails required? (Length?) Is sand filtering system reqd?
Separator water filtration system reqd? Is sand monitoring system reqd?

Client Representative: Schlumberger Representative: Reviewed by FSM/EIC: WTS-SWT-SDP-002 Rev-1.0

 Job Questionnaire
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Sampling Information
How many separator gas samples? H2S by UOP212?
Are special teflon lined gas bottles reqd? Mercury in gas by AFS?
How many separator oil samples? Radon in gas? Heavy metals?
Volume of crude oil to be sampled? Prod. water: Chlorides, Ions?
Which lab should samples be sent to? Oil in water analysis?
Cased hole bottomhole sampling - SRS, SCAR?
Openhole bottomhole sampling - MPSR, MRSC, SPMC?
PVT Express - Wellsite GOR, C36 Comp, Saturation pressure?

Subsea Information
Landing string type & weight? Chemical injection reqd at SSTT?
Water depth? SSTT coiled tubing cutting facility reqd?
ID of the subsea tree required? Size of coiled tubing to be cut?
Lubricator valve required? (How many?) Temperature monitoring reqd at BOP stack?
Retainer valve required? BOP stack drawing space out attached?
EZ valve required? (Jack-up only) Deep water system reqd?

Environmental
Minimum ambient temperature? DegF Acceptable heat level at rig edge? (BTU/hr)
Maximum ambient temperature? DegF Wind direction?
Acceptable noise level? Rig orientation?

Downhole Memory Gauges

Quantity of memory gauges to be run in hole? DGA reqd?
Quantity of backup gauges reqd? DGA LINC SRO reqd while flowing?
Total recording time reqd? DGA LINC SRO reqd while shut-in?
Sapphire or Quartz gauges reqd? SRO YoYo reqd?
Gauges ported to annulus? Subsea gauges reqd?

Preferred Gauge Quantities (Types)? WQCR WTQR WTSR SLSR HPTR

Additional Comments:

Client Representative: Schlumberger Representative: Reviewed by FSM/EIC: WTS-SWT-SDP-002 Rev-1.0

 Rig Visit Report
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Burner Boom and Base Plate Details

(Note that all boom support structures must be verified fit-for-purpose according to Step 7 of SDP)
Description (see next tab for dim. details) Value Units Comments
King Post Safe Working Load (SWL) Rig Visit is not done due to client decision
Date of last certification
Distance - A (base plate to vert attachment)
Distance - B1 (base plate to horiz attachment)
Distance - B2 (base plate to horiz attachment)
Offset (O) btw vertical hang-off & base plate
Hinge Pin Diameter
King Pin Diameter
King Pin Length
Base Plate Height
Guy Wire Pad Eye Diameter
Guy Wire Certification Date

Rig Permanent Piping

(Note that all piping must have valid certification records in accordance with the POM. Records must be attached to this report)
Description Y/N Value Units Certs Date Comments
Is kill line available on rig floor?
Height to kill line top connection?
Is standpipe available on rig floor?
Height to standpipe top connection?
Is there a flowline from rig floor to test area?
Is there a gas m'fold from test area to boom?
Is there an oil m'fold from test area to boom?
Is there a water m'fold to the booms?

Rig Permanent Relief Lines & Other Lines

(Note that all piping must have valid certification records in accordance with the POM. Records must be attached to this report)
Description Y/N Value Units Certs Date Comments
Is relief line available on rig floor?
Is there a relief header? No. of connections?
Is there a LP gas line for the surge tank?
Is there a surge tank relief line?
Is there a separator relief line?
Is there a steam exchanger relief line?
Is there a tie-in point for other vent lines?

For Architest Simulations

(Piping description between equipment will be dictated by the P&ID and Layout Diagram)
Line Length Elbows 45 Deg Gate V Ball V ID WP Others
Rig Flowline
Rig Oil-Line [Port side]
Rig Oil-Line [Stbd Side]
Rig Gas-Line [Port side]
Rig Gas-Line [Stbd Side]
Vent Line 1
Vent Line 2
Comments:
 Rig Visit Report
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Client Representative: Schlumberger Representative: Reviewed by FSM/EIC: WTS-SWT-SDP-003 Rev-1.0

Rig Permanent Piping

(Note that all piping must have valid certification records in accordance with the POM. Records must be attached to this report)
Description Size Connection Comments

Example:
Flow Line Inlet 3" 1502 Thread Confirmed with dummy

FLOW & KILL LINES

Kill Line Outlet
Stand Pipe Inlet
Stand Pipe Outlet
Flow Line Inlet
Flow Line Outlet

PORT SIDE LINES

Oil Line Inlet
Oil Line Outlet
Gas Line Inlet
Gas Line Outlet
Water Line Inlet
Water Line Outlet
Boom Oil Inlet
Boom Oil Outlet
Boom Gas Inlet
Boom Water Inlet
Boom Water Outlet
Boom Air Inlet
Boom Air Outlet

STARBOARD SIDE LINES

Oil Line Inlet
Oil Line Outlet
Gas Line Inlet
Gas Line Outlet
Water Line Inlet
Water Line Outlet
Boom Oil Inlet
Boom Oil Outlet
Boom Gas Inlet
Boom Water Inlet
Boom Water Outlet
Boom Air Inlet
Boom Air Outlet

OTHERS
 Rig Visit Report
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Client Representative: Schlumberger Representative: Reviewed by FSM/EIC: WTS-SWT-SDP-003 Rev-1.0

Rig Utilities & Other

Description Size, Connection, Comments

RIG STEAM SUPPLY

Supply Line Connection
Return Line Connection
Supply Pressure
Max. Flow Rate - lbs/hr, BTU/hr
Is 3rd Party Steam Generator Reqd.?

RIG AIR SUPPLY

Supply Pressure
Crows Foot Type: (Jay-Mac, American etc.)
No. of connections on rig floor
No. of connections in test area

RIG WATER SUPPLY - PRESSURE TESTING

Crows Foot Type: (Jay-Mac, American etc.)
High pressure cleaning water supply?

RIG WATER SUPPLY - TO BOOMS

Supply Pressure
Max. Supply Rate - bbl/day, m3/hr
Supply Pump (Mud, Fire or Ballast)
Additional Cooling System Available? Description?

ELECTRICAL SUPPLY
1 Phase Voltage
Max. Current
3 Phase Voltage & No. of outlets
Max. Current
Any known power supply problems?

DIESEL SUPPLY
Connection on diesel supply hose
Length of hose (will it reach relevant equipment?)

COMPRESSORS
Rig Air Manifold? Connections?
Estimated amount of compressor hose reqd.?

Client Representative: Schlumberger Representative: Reviewed by FSM/EIC: WTS-SWT-SDP-003 Rev-1.0

 Personnel Planning
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Job Description Name Location Offshore Competencies Mobilisation Date

Certification Validity
Date
Night TDA + Supervisor Hashem Khola Tajoura-Libya N/A 25-Mar-09
Day Ch/Op Aimen Aboras Tajoura-Libya N/A 21-Mar-09
Day Op Ali Ben Erhoma Tajoura-Libya N/A 21-Mar-09
Night Ch/Op Mohamed Mansor Tajoura-Libya N/A 21-Mar-09
Night Op Ashaf Boro Tajoura-Libya N/A 25-Mar-09
Day DST Ann Paulin Tajoura-Libya N/A 25-Mar-09
Night DST-TCP Michaiel Tajoura-Libya N/A 25-Mar-09
Day TDA Aimen Tarhony Tajoura-Libya N/A 25-Mar-09
Driver/DST op Ali Bitro Tajoura-Libya N/A 25-Mar-09

Comments:

Schlumberger Representative: Reviewed by FSM/EIC: WTS-SWT-SDP-006 Rev-1.0

 Design Package Contents Checklist
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Job Design Questionnaire

Test Program (summarised)

Equipment Layout Diagram (with verification of deck loadings)

Hazardous Areas Diagram

Architest Report

PSV Sizing & Instrumentation Datasheet (Protection Devices Sheet)

HAZOP

Task / Competency Verification

DST/TCP String Diagram (if appropriate)

Downhole Gauge Specifications (if appropriate)

Design Package Sign-Off Sheet

 Design Package Sign Off Sheet
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Revision Effective Date Description Prepared by: Reviewed by:

Signed:
Last Revision Approved By (name):

Comments:
The controlled source document of this Work Instruction is stored on the Schlumberger Network.
Any paper version of this Standard is uncontrolled and should be compared with the source document at time of usage to ensure it is up-to-date.

Client Representative: Schlumberger Representative: Reviewed by FSM/EIC: WTS-SWT-SDP-008 Rev-1.0

 Crossover List
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

SURFACE WELL TEST EQUIPMENT - CROSSOVER LIST

WP Serial Cert To
Item Description / Location (psig) Inlet connection Outlet connection Number Date Rig Fr Rig
1 X-Over inlet of 10-K CM 2500 psi 602- F 1502- M 68597 Jan-09 X
2 X-Over outlet CM to 5K 2500 psi 1002- M 602- F 453913 Mar-09 X
3 X-Over 4 1/2 Acme pin to 3 1/2 IF 5000 psi 4 1/2 Acme 3 1/2 IF X
4 X-Over Kill Line 5000 psi 3"1002 M 2" 1502 F 68554 Mar-09 X
5
6 Data headr 5000 psi 3" 1002 F 3"1002 M 755 9-Mar-09 X
7 3” 602 f x 4” 602 M 5000 psi 3” 602 F 4” 602 M X
8 3 1/2 New Vam pin X 3 1/2 EUE box 5000 psi 3” 602 F
9 4 1/2 pin IF X 3 1/2 box IF 5000 psi 3 1/2 box IF 4 1/2 pin IF X
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40

Comments:

Prepared by: Reviewed by: Page WTS-SWT-SDP-009 Rev-1.0

1 of 1
 Certification Check List
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Equipment FHD-G 753

CoC / Major Survey Y

NDT / MPI / Ultrasonic Y

Electrical Function Test N/A

FIT / TRIM / Hydrostatic Test Y

PSV or Other N/A

RITE History Card Y

Equipment

CoC / Major Survey

NDT / MPI / Ultrasonic

Electrical Function Test

FIT / TRIM / Hydrostatic Test

PSV or Other

RITE History Card

 Certification Check List
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02
Comments:
The frequency of these inspections are dictated by the Pressure Operations Manual (POM).

Four columns are provided so that a recent maintenance history can be shown

This checklist should be the covering page for each piece of equipment, with photocopied certificates attached and compiled in a pressure
certification file

Client Representative: Schlumberger Representative: Reviewed by FSM/EIC: WTS-SWT-SDP-010 Rev-1.0

 Lifting Certification
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Item / Seria Number

CCLE Date (CoC Lifting Equipment)

Certificate Number

MPI Date - 3 yrs

Certificate Number

Sling Load Test Date - 6 yrs

Certificate Number

Sling Visual Inspection Date - Annual

Certificate Number

Item Load Test Date - 6 yrs

Certificate Number

Item Visual Inspection Date - Annual

Certificate Number

Comments:
The frequency and nature of lifting inspections will be dependent on local regulations. However all practices must comply (at a minimum) with the
OFS Mechanical Lifting Standard: QHSE-S013

The inspections and frequency suggested in this worksheet is simply a guide. Check with the lifting coordinator for location specific procedures.

This checklist should be the covering page for each piece of equipment, with photocopied certificates attached and compiled in a lifting
certification file

Client Representative: Schlumberger Representative: Reviewed by FSM/EIC: WTS-SWT-SDP-010 Rev-1.0

 Load-Out List
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Sender: Contact: Phone:

Receiver: Contact: Phone:

SURFACE WELL TEST EQUIPMENT

Serial Weight Length Width Height Date from
Item Description Number (kg) (m) (m) (m) Date to Rig Rig Remarks
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33

Comments:

Prepared by: Reviewed by: Page WTS-SWT-SDP-012 Rev-1.0

1 of 1
 Lifting Checklist
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Rigging Check Tick Comments

Head Rings
No damage, cracks, stretching
X
Sling ID tag attached and legible
Has certification tag with Safe Working Load (SWL) and sling angle

Slings
In good condition - no kinks, twists, or broken wires X
(Grease slings for corrosion protection if reqd.)

Thimbles
X
No damage or stretching

Shackles
4 piece shackles should be used - shackle body, pin, nut & split pin

Split pin - should only be used once then replace

Shackle body & pin - material grade stamped and ID marking on head X
and body
Shackle pin/nut is free from welds. (If found - replace shackle)

Ensure shackle moves freely. If any damage visible - replace

Certification Plate
Visible, in good condition? X
Hard stamped with current certification dates?

Markings
ID number on all 4 sides?
ID number 300mm on roof (where applicable)?
TARE, NET, GROSS on one side?

Loose Objects Tick Comments

No visible loose items on equipment or lifting skid/frame -
(spanners, nuts, wire etc.)
X
All hinged items (swinging doors) securely fastened
Hinges are tight, in good condition and fit for task

Certification Tick Comments

Lifting certification & lifting checklist to be cross checked with
EIC/SQC at time of load out and included in the lifting certification
package.

Additional Comments:

Always check whether DG signs are needed

Schlumberger Representative: Reviewed by FSM/EIC: WTS-SWT-SDP-013 Rev-1.0

 SWT Packing List
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09

Flowhead 5K / 10K / 15K

Rating & Size WP: S/N: ID: Temp:
Connections Flow: Kill:
Swab X-Over WP: S/N: Connections:
Kill Check Valve WP: S/N: Connections:
Test Plugs Flow: Kill: Swab: Bottt:
Elevator Bails Length: S/N:
Comments:

Coflexip Hoses 5K / 10K / 15K Acid Job Y/N?

Production WP: S/N: Conn: Size:
Kill WP: S/N: Conn: Size:
Back Up Hose WP: S/N: Conn: Size:
Coflon / Other WP: S/N: Conn: Size:
Clamps Size & Qty:
Seal Rings Size & Qty:
Comments:

SSV 5K / 10K / 15K Connections:

Rating & Size: WP: S/N: Size: In: Out:
Comments:

DP Sand Filter 5K / 10K / 15K Connections:

Screen Sizes S/N: In: Out:
Drain Hoses Length: Size / Conn:
Comments:

Choke Manifold 5K / 10K / 15K Connections:

Size: WP: S/N: In: Out:
Comments:

Sand Filter Unit Flowline Connections: PSV Connections:

WP: S/N: In: Out: In: Out:
Discharge Hose Length: Size / Conn:
Comments:

Steam Exchanger 5K / 10K / 15K Flowline Connections: PSV Connections:

STX - B/C/D S/N: In: Out: In: Out:
PSV Set Pressure Steam In: Steam Out: Orifice Size / Type:
Comments:

Client Representative: Schlumberger Representative: Reviewed by FSM/EIC: WTS-SWT-SDP-005 - Rev 1.0

 SWT Packing List
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09

Separator 1440 / 720 Connections:

S/N: In: Oil Out: Gas Out: Water Out:
PSV Set Pressure Orifice Size / Type: PSV In: PSV Out:
Barton GasP Gas DP Line Bore
Flow Meters
Comments:

Surge Tank 50 / 150 Flowline Connections: Gas / Vent:

S/N: In: Out: Gas Out: PSV Out:
Volume: Drain: Steam In: Steam Out:
PSV Set Pressure Orifice Size / Type:
Flame Arrestor: InLine Choke: Orifice Size (ILC):
Comments:

Gauge Tank Atm Connections:

S/N: In: Out:
Volume: Flame Arrestor:
Comments:

Transfer Pump Type S/N Rating (BPD) Connections:

Electrical In: Out:
Air Driven In: Out:
Comments:

Manifolds WP S/N Size Connections:

Oil In: Out:
Gas In: Out:
Comments:

Burners
Evergreen S/N: Nozzle Size:
3 Header S/N:
4 Header S/N:
Mud Burner S/N:
Ignition System
Spool Pieces
Comments:

Booms
SLB Booms Length: S/N:
Base Plates Turntables Fish Plates
Pin Size King Post Transport Slings
Verical Guy Wires Horizontal Guy Wires Other Accessories
Comments:

Client Representative: Schlumberger Representative: Reviewed by FSM/EIC: WTS-SWT-SDP-005 - Rev 1.0

ESD Panel
S/N: Hydraulic Hose Length: Air Hose Length:
 SWT Packing List
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09
Number of Stations: Erosion Probes:
Hi Pilot Set Pressures
Low Pilot Set Pressures:
Comments:

Miscellaneous Connections:
Inline PSV S/N: Orifice Size / Type: In: Out:
Vent Header S/N: Inlet Conn(s): Outlet Conn:
Chemicals
Chemicals (cont.)
Injection Pumps
Comments:

3rd Party
Compressors Supplier: Serial Nos.
Hoses 4" Length 2" Length Air M'fold:
Steam Generator Supplier: S/N:
Hoses Length Size: Conns:
Comments:

Client Representative: Schlumberger Representative: Reviewed by FSM/EIC: WTS-SWT-SDP-005 - Rev 1.0

 Pre-Job Meeting
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Design and Planning Job Preparation

Job Questionnaire data confirmed prior to mobilization Yes No FIT and TRIM entered in RITE Yes No
Client test objectives understood by crew Yes No Pressure and lifting certification files available Yes No
HARC completed Yes No Third Party equipment certification verified Yes No
Rig Visit completed Yes No Personnel competency verification Yes No
Architest simulations performed Yes No Packing lists complete and signed off Yes No
P&ID, Layout Diagrams reviewed Yes No Project specific items checked Yes No
Job specific operating procedures included in program Yes No Load out sheets complete (inc. MSDS, DG) Yes No
Key contingency plans discussed Yes No Crew task assignment completed Yes No
HAZOP conducted Yes No Supervisor familiar with contract T&C's Yes No
Design Package submitted and reviewed by client Yes No Updated copy of Service Delivery Procedure Yes No
QUEST Meeting Report Number (optional) QUEST Client Price book loaded in FTL Yes No

Topics Discussed:

Find attached in SDP folder

Recommendations:

Attendees:

Signed by FSM/EIC: Signed by SWT Supervisor Reviewed by: WTS-SWT-SDP-014 Rev-1.0

 Daily Morning Fax
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

To: Location:
cc: Fax:
Date:
From: Pages (inc.):
Subject:

All Daily Morning Fax Attached in SDP folder

Operations on LAST 24hrs
Schlumberger
>

>

>

>

Rig
>

>

>

>

Operations on NEXT 24hrs

Schlumberger
>

>

>

>

Rig
>

>

>

>

Additional Comments (Equipment / Spares Required, Personnel Movements …etc )

Prepared by: Reviewed by: Page WTS/SDP-102 - Rev-2.0

of
 Shift Handover
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Crew: Time Period:

General Comments and/or issues:

Current Operation:

Next Operation:

Permits and Barriers Status:

Valve Status:
Downhole Tool Subsea Valve Flowhead Valve Choke Manifold and Separator and Well Flowing Status: ESD System Status:
Status: Status: Status: Choke Size: Orifice Plate:

Job operation procedure reviewed and Agreed with Client? Yes No

THA ready and reviewed for next operation step? Yes No
Sequence of Events Updated? Yes No

SWT Crew Chief out going: SWT Crew Chief on duty: Agreed by Testing Supervisor: WTS-SWT-SDP-016 Rev-1.0
 Jobs-to-do List
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Jobs-to-do Listing & Rig-Up Prompt Sheet

Pressure test Flowhead and check valve
Flush through ESD hydraulic lines and pressure / function test
Time ESD stations and ensure they all trip the system
Leak test ESD system (min. 24 hours with panel air supply shut-off)
Ensure no instrument / ESD lines are resting against any part of steam circuit that could cause the hoses to fuse
Function test hydraulic quick exhausts
Check choke seats and zero adjustable chokes
Inventory choke beans
Ensure no reduced bore pipework / x-overs are installed down stream of Choke Manifold (hydrate formation risk)
Steam trap on Steam Exchanger – run boiler to test lines and ensure steam trap is working correctly
Clean Separator sight glasses
Ensure Oil Wizard / Float is responding to liquid level
Check separator gas wizard operation with dead weight tester
Lower plate carrier to confirm alignment and no debris in bottom of meter
Inventory Daniel/Barton orifice plates
Ensure Barton liners are not in contact with Separator body
Measure shrinkage tester volume
Ensure Shrinkage tester is online to be pressure tested with the Separator
Isolate gas wizard prior to pressure testing and drain Barton immediately after testing
Ensure Barton or Daniel orifice meter gate is holding pressure during pressure testing Separator
Ensure Separator inlet check valve is holding after Separator pressure test is bled off
Perform meter factors and ensure Floco and Rotron are working correctly
Blank any manifold outlets not in use with test caps
Install Surge Tank sight glass level indicators. Ensure Magnetic floats are installed
Have electrician complete electrical checks
Function test electric transfer pump to boom
Function test burner ignition system
Function test rig deluge system to burner heads, flushing first
Have mechanic complete mechanical checks on equipment (Compressors)
Run Compressors on full load to flare booms – min. 1 hour
Ensure Compressors and Boiler are fully fuelled
Calibrate Barton
Calibrate Foxboro
Calibrate Hi/Lo Pilots
Install sample points and instrumentation manifolds
Install pressure gauges and thermometers
Install Hi/Lo pilots
Install pipe supports where needed
All flow lines tied down and secured
All instrument air and water lines whip-checked and pinned
All equipment earthed / grounded including pumps and methanol tanks
Well test air and water points labelled
Function test Injection pumps and record pumping rates
Thickness test flow lines prior to pressure testing
Conduct and record pipe tally
Setup centrifuge and ensure adequate centrifuge glasses with spares (min 4 total)
Earth sample point buckets to sample points
Fire Extinguishers placed in test area
Fire fighting foam set up for Methanol

SLB Supervisor Initials: Page 1 of 2 WTS-SWT-SDP-017 Rev-1.0

 Jobs-to-do List
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Place salt around Methanol Tanks and Pumps

Setup Ranarex and power up to confirm it is working and ribbon is intact
Dry Ranarex crystals
Ensure reading sheets are prepared and reflect the job type
Verify entire crew have read test programme and understand objectives
Synchronise watches with STAN time

SLB Supervisor Initials: Page 2 of 2 WTS-SWT-SDP-017 Rev-1.0

 Foxboro Calibration
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Date: Serial Number: Calibration Performed by: Witnessed by:

Pressure Range of Recorder: Calibration Charts Attached:

Comments:

Client Representative: Schlumberger Supervisor: WTS-SWT-SDP-018 Rev-1.0

 Barton Calibration
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Date: Serial Number: Calibration Performed by: Witnessed by:

Differential Pressure Range: Static Pressure Range: Calibration Charts Attached:

Comments:

Client Representative: Schlumberger Supervisor: WTS-SWT-SDP-018 Rev-1.0

 Pilot Calibration
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Pilot Number: Set Point (psi): Calibration Performed by: Witnessed by:

Comments:

Client Representative: Schlumberger Supervisor: WTS-SWT-SDP-018 Rev-1.0

 ESD Station Testing
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

ESD Station Location: Closure Time:

Date: Calibration Performed by: Witnessed by:

Comments:

Client Representative: Schlumberger Supervisor: WTS-SWT-SDP-018 Rev-1.0

 PSV Calibration
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Date: Serial Number: PSV Type & Size: Company which Performed the calibration:

Set pressure:

Comments:

Client Representative: Schlumberger Supervisor: WTS-SWT-SDP-018 Rev-1.0

 Thickness Testing
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

SURFACE WELL TEST EQUIPMENT - THICKNESS TESTING

Pre-Flow Thickness Post-Flow
Item Description / Location Type (mm) Thickness (mm) Comments
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40

Comments:
Refer to table in POM for minimum thickness criteria

Prepared by: Reviewed by: Page WTS-SWT-SDP-019 Rev-1.0

1 of 1
 Meter Factors
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Input Tank Factor (bbl/cm)

Meter: Floco Pump Rate: 0.5bbl/min

Meter Factor # 1
Meter Factor
Time: hh:mm:ss Meter Reading (bbls) Tank Level (cm)
Initial:
Final: #DIV/0!
Delta Time:

Meter: Floco Pump Rate: 1bbl/min

Meter Factor # 2
Meter Factor
Time: hh:mm:ss Meter Reading (bbls) Tank Level (cm)
Initial:
Final: #DIV/0!
Delta Time:

Meter: Rotron Pump Rate: 2bbl/min

Meter Factor # 3
Meter Factor
Time: hh:mm:ss Meter Reading (bbls) Tank Level (cm)
Initial:
Final: #DIV/0!
Delta Time:

Meter: Rotron Pump Rate: 3bbl/min

Meter Factor # 4
Meter Factor
Time: hh:mm:ss Meter Reading (bbls) Tank Level (cm)
Initial:
Final: #DIV/0!
Delta Time:

Meter: Rotron Pump Rate: 4bbl/min

Meter Factor # 5
Meter Factor
Time: hh:mm:ss Meter Reading (bbls) Tank Level (cm)
Initial:
Final: #DIV/0!
Delta Time:

Comments:

Client Representative: Schlumberger Representative: WTS-SWT-SDP-020 Rev-1.0

 Pre-Flow Checklist
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Reviewed by: Name: Signature:

Well Site Manager (Company Man)
OIM / Rig Manager
Client Test Engineer Rabah Barah
SLB Test Supervisor Hashem khula

Certification & Manuals

Equipment certification package valid and held on rig
Vessel name plates checked
Relief valve certification valid and held on rig
Equipment manuals held on rig
SLB Well Testing Operations manual held on rig
SWT equipment electrically inspected and in conformance with rig requirements including grounding
Rig flowlines certification package valid and held on rig (inc. boom piping if rig booms). Rig flowlines are of
welded / flanged construction (not threaded)
Rig gas alarms tested

Surface Test Equipment Installation

Have rig flowlines been checked and confirmed to not contain any hydrocarbons
Are rig flowlines free from scale (have they been flexed and flushed)
Has well test installation been checked against approved P&ID
Has work site inspection been completed and actions closed out
Are access and escape routes clear
Have personnel been briefed on maximum permitted working hours
Have all the NPT threads in the system been inspected prior to pressure testing
Are tapping points clear and situated at the top of piping to minimise potential for blocking
Has surface test equipment been pressure tested as per program
Have separator meter checks been performed over full range of expected liquid flowrates
Has STAN data acquisition system been calibrated
Have flow safety valves (check valves) been function tested
Are flowlines and relief lines adequately whip checked and secured to deck
Is lighting adequate in test area
Are barriers and signs sufficient and appropriate
ESD system function tested including all ESD stations, hoses, pilots, actuators and panel
ESD system leak tested panel air supply isolated
ESD lines inspected and confirmed clear of heat sources (eg. STX vessel) and not exposed to impact damage
Location of ESD stations - signs displayed prominently and personnel briefed
Air supply to test separator labelled and locked off from other users
Fire monitors and portable fire extinguishers in place, including alcohol resistant foam for methanol fire fighting
Has steam generator feed water been quality checked, and is there sufficient available
Heat exchanger condensate returns routed to visible, safe location for overside discharge, or if to header tank,
header tank is not at higher deck level. Steam trap checked for scale, steam trap functioning.
Heat exchanger cleared of water. NRV installed at steam inlet to heat exchanger vessel
Is the age and service history of steam hoses known and acceptable
Has the pressure rating and steam service rating been confirmed
Have steam hoses been routed away from walkways and potential crane set down areas
Is gas line KO drum (if present) fitted with a sight glass and LSH warning device
Has the KO drum level alarm been function tested
Has a minimum level been set in the surge tank sight glasses
Is all sampling equipment on hand and sampling programme fully understod by sampling technician

Client Representative Initials: SLB Representative Initials: Page 1 of 3 WTS-SWT-SDP-021 Rev-1.0

 Pre-Flow Checklist
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Burners & Booms

Boom side stay guy wires secured to secure anchor points without slack. Tensioners should be accessible inboard
Walkways / handrails in safe condition
Ignition system electrically inspected and function tested - buttons/panels accessible and in dry areas
Propane bottles / diesel tanks stored out of the direct radiated heat path
Burner head orientation optimum for wind direction
Water screens function tested - working efficiently with all nozzles clear, water lines flushed and clear of scale
Adequate hoses / cooling in place for rig structure, cranes, winches etc.
Emergency team to have been shown pre laid-out hoses and discussed fire fighting procedures
Have burner compressors been serviced prior to job and supplied with adequate spares
Have air compressors been run onload for 1 hour minimum duration
Are air compressors fitted with spark arrestors and remote ESD buttons (only in Zone 2 area)
Are air compressors positioned for optimum ventilation and cooling
Have air line NRV's (check valves) been tested
Evergreen burner shuttle valve not tied into rig air supply and confirmed operational
Are procedures for refuelling air compressors in place and understood by all parties (rig and well test personnel)
Are diesel supply and air start hoses clearly labelled and on hand

Notifications
Have all relevant authorities been informed that flaring activities are about to commence
Logistics / helicopter company informed of forward test program - no refuelling planned during flow periods

Environmental Checks
Have well test personnel been briefed on environmental sensitivities, requirements and commitments
Has an oil spill contingency plan been arranged for this well
Are adequate oil spill kits available in the well test and air compressor deck areas
Are high efficiency burners being used
Are shutdown and alarm systems fully operational
Have surge tank and KO pot level alarms been function tested prior to flow
Are procedures in place to ensure fast response during emergency shutdowns
Is manual ESD button positioned near flare watch station to minimise response time in an emergency
Is the cementer ready to implement well kill procedures at short notice
Are two flare watchers working on rotating shifts
Are flare watchers positioned to observe tank vent line outlet during flowing to tank
Are flare watchers in full time radio communication with Test Supervisor / Crew Chief
Is there an increased watch provided during night-time flaring
Is the support vessel available for night time spill watch
Is the BCO liaising with the support vessel to maintain a safety exclusion zone during testing
Are dual propane ignitors in operation
Is there the facility to monitor for, and manage, any sand production
Are there logs being kept of the cumulative flared hydrocarbon volumes
All open drains to sea plugged off in the test area

Final Pre-Flow Checks

Surface, Slickline, Subsea and DST/TCP equipment checklists completed and verified
Final safety inspection of well test area (walk-around) conducted by Well Site Manager and OIM
SWT equipment installation checked to be as per P&ID
Warnings/barriers erected to warn personnel of hot/pressurised pipework
STAN data acquisition alarm set points set and understood
Lab cabin shut-down systems checked (positive pressure drop, gas detection)
Is lab cabin air intake routed to safe area

Client Representative Initials: SLB Representative Initials: Page 2 of 3 WTS-SWT-SDP-021 Rev-1.0

Has the test deck and surrounding area been checked for non-IS electrical equipment and ignition sources
Permits to work in place including review/cancellation of all other hot-work permits
 Pre-Flow Checklist
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02
Crane operations shut down and on boom rest as required
All explosives off the rig (on boat) or on jettisonable bunkers
Air intakes/vents open/closed as appropriate and tagged as required
ESD system function tested, witnessed and logged (all stations)
JSA/JHA conducted prior to flowing the well
Personnel assigned with gas detector to check line for leaks while flowing
Propane pilots alight
Rig water screens operating
Burner boom water screens operating
All water-tight doors and hatches closed and tagged out
Non essential personnel clear of test area
Valve status board current and line-up confirmed
Cement unit isolated and lined up ready to pump kill fluid (confirmed by cementer)
Sufficient number of air compressors on load for anticipated flowrate
Steam generator / heat exchanger up to temperature
All low pressure pilots isolated during well opening
All needle valves on sample points and vents closed
STAN data acquisition system running on rapid scanning rate as per program
Flare watchers in position and aware or responsibilities, radio communication checked
Flare watcher positioned to observe tank vent (initial flow to tank)
Support vessel notified of impending flaring operations and briefed on duties during testing
Radio check - Driller, Flare Watch, Test Crew. Channel confirmed and all batteries charged
PA announcements made

Client Representative Initials: SLB Representative Initials: Page 3 of 3 WTS-SWT-SDP-021 Rev-1.0

 Pre-Flow Safety Meeting
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Pre-Flow JSA & Prompt Sheet

Final Walk-Around

Go through final pre-flow check list. Complete and signed

Well Test Permit-Hot work: Includes flowing the well, flaring of hydrocarbons, pressure testing,
running compressors, rig deluge. ALL other hot work permit to cease

JSA's available for well testing operations, compressors, pumping methanol, etc.

Discussion of well test program: Clean up / Shut-in / Multi rate / Final shut in

SAFETY:

1. No Incident. Spot all hazards, STOP cards.

2. No spills. Continuous monitoring around the rig and the sea for sheen. Spill kits ready at designated areas.
3. PPE: Full coverall, gloves, hard hat, ear plugs, double ear protection for noisier areas.
4. Communications: SLB radios. Rig floor / driller as focal point, Radios with fully charged batt (confirm channel),
handovers
5. Emergency response: 2 x escape routes for every person working anywhere on the rig.
6. Well test supervisor or designated crew chief as in-charge of operations.
7. ESD stations around the rig. Activate when something is not right. Instruction on how to operate
8. Barrier tape, signs, tags
9. Essential personnel only.
10. Firewatchers in place.
11. Do not close/remove SLB air, water points.Tagged out.
12. No crane ops. Correct position away from flare.
13. Stay away from pressurized lines, hot & cold pipework & hoses, flammable gases during sampling, possible H2S,
slippery floor, trip hazards, clear combustible materials. Report anything not quite right
14. Buddy system
15. Flare boom selection as per wind direction. Continue monitoring & report any wind changes.
16. Flare watchers on 2 hr shifts next to ESD station.
17. Designated rig crew member for gas monitoring/leaks.
18. Heat monitoring of rig, choke back as necessary.
19. Fire hoses ready. Portable fire extinguishers on various locations.
20. Foam fire extinguisher ready for methanol (if used).
21. Water deluge ready
22. Pilots on.
23. Required compressors online.
24. Boiler on temperature.
25. Flowlines valves and directions confirmed.
26. Manning equipment: 1 x c/m, 1 x sep & tank, 1 x rig floor at all times
27. PA announcement

Other Business:

SLB Supervisor Initials: Page 1 of 1 WTS-SWT-SDP-022 Rev-1.0

 Sequence of Events
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Time Events

Prepared by: Reviewed by: WTS-SWT-SDP-023 Rev-1.0

 Maintenance List
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

SURFACE WELL TEST EQUIPMENT

Serial Maintenance Required Assigned
Item Description Number (Outline areas for improvement) to (initials):

Generator : GEN 275 Generator :

Electric Switches
1
Oil-filters etc.

Lab cabin: LTU Lab cabin:

Electric socket ,AC ,lights
2
Shelves ,Out side lights and
sockets,inventory to be ready for
next job.
Choke manifold LTU Choke manifold
TRIM , stamp choke with size.
3
Check ready box and set of choke
beans as per ready box check
list
Flowhead: FHD-782 Flowhead:
TRIM,Check oil of swivel.
4

Choke manifold of green LTU LTU Choke manifold of green LTU:

TRIM,or Repleace if needed.
5

Separator: SEP-773 Sliding door of danial Orifice hard to

TRIM,check all manifold valves, move ,preesure test barton manifold
6
Water meter need redress and Function test all of fisher wizard
meter factor including PCV ,LCV
oil meter needs meter factor
Check for plug in Sight glass Safty
ball valve.
7

Prepared by: Assigned by (EIC / Foreman): Page WTS-SWT-SDP-024 Rev-1.0

of

Maintenance List
 Client Well Field Rig Date Job Reference

CONTINUED…

10

11

12

13

14

15

16

Prepared by: Assigned by (EIC / Foreman): Page WTS-SWT-SDP-024 Rev-1.0

of
 Post-Job Meeting
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Job Execution Close Out

Signed off test charts, reading sheets, field report etc. Yes No CSR (Client Satisfaction Rating) Yes No
Detailed Sequence of Events Yes No RQC review Yes No
Updated JSA's Yes No RIR reviewed and captured in QUEST Yes No
Shift Handover forms Yes No Lesson Learnt reviewed and submitted to In-Touch Yes No
Daily fax records Yes No Equipment status / post job maintenance list Yes No
Copy of gauge data for QC Yes No Client Job Report delivered Yes No
Copy of backload lists Yes No Copy of Client Job Report included in SDP binder Yes No
Spares usage documented (ready box checklists) Yes No Service Delivery Procedure binder updated Yes No
Service Delivery Procedure updated electronically Yes No
Crew appraisals reviewed Yes No
Field Ticket Lite reviewed and submitted Yes No
Update RITE.Net Yes No

Topics Discussed:
1- General Job Feedback

2 - Highlights

3 - Lowlights

Lesson Learnt and Recommendations:

Attendees:

Signed by FSM/EIC:

Signed by SWT Supervisor Reviewed by: WTS-SWT-SDP-026 Rev-1.0

 Client Satisfaction Rating
Client Well Field Rig Date Job Reference
Sontrach A1-65/02 Ghadames Basin TP-215 16-Mar-09 2009-001-SOF-02

Schlumberger is committed to improving our overall performance, and services offered to our clients. To assist us in achieving
that goal, we would appreciate a few minutes of your time to complete the questions below. We are interested in identifying spec

Services:
Find attached to SDP folder

Design: N/A Above Expectations Meets Expectations Below Expectations

Design and Planning

Communication

Support

Quality

Delivery

Follow-up and Responsiveness

Execution:
Safety and Environment Performance

Personnel Competency

Crew Enthusiasm / Attitude

Crew Communication

Equipment Performance

Equipment Appearance

Data Quality

Time against performance objectives

A QUEST report must be made for any score "Below Expectations".

QUEST report number must be recorded here:

Job Performance Summary (this information must be completed)

Total Operation Time Lost Time: Runs Miss Runs:

Client additional comments on the job performance

Client Representative: Schlumberger Representative: Reviewed by FSM/EIC: WTS/SDP-043 - Rev-2.1