910 21 001 PDF
910 21 001 PDF
910 21 001 PDF
The Y-strainers are installed in water systems to filter out pebbles and other impurities that could damage the equipment.
They are designed with focus on easy maintenance and low head loss.
Product description:
Y-strainer with SS screen
Standards:
· Face to face according to EN 558 Table 2
· Standard flange drilling to EN1092-2 (ISO 7005-2), PN 10/16
Test/Approvals:
· Hydraulic pressure tested to 1.5 X PN
Features:
· Short face to face: DN 50-150 to EN 558 ser. 4, DN 200-300 to ser. 7
· The position of the drain plug enables full drainage without removing the lid
· Quick removal of lid for maintenance
· Lifting eye from DN 100 for easy handling
· Nuts are fixed in cast slots to prevent corrosion of threads
· Screen of stainless steel in robust one-piece design
· Drinking water approved EPDM O-ring
· Fusion bonded epoxy coating according to DIN 30677-2, GSK approved
· Optional pressure transmitter ports for measuring differential pressure
The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range.
Component list:
1 5
Components may be substituted with equivalent or higher class materials without prior notification.
Comments:
Open area ratio: Sum of open area in the screen divided by area of the bore in nominal pipe diameter.
The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range.
The designs, materials and specifications shown are subject to change without notice due to the continuous development of our product range.