China Frotec Environmental Co.

, Ltd

China Frotec Environmental Co.,Ltd

Contact Person: Daisy Lee

Mobile/ Skype/ Whatsapp/ Wechat: +8613857405982
Website: www.frotecfilter.com
Email: [email protected]

1
 China Frotec Environmental Co., Ltd

Company Introduction

USA FROTEC technology inc are established in unite states, headoffice is located in florida. our company are
focusing on environmental protection.

Talking about the importance of not only the availability of clean water, but its consumption and attitude in our
life. FROTEC group’s goal is clean water in every home.

Now we already have more than 100.000 square meter space for manufacturing filtration products in
china( anhui, fujian,jiangsu three factory).

With advanced production equipment, quality control instruments and technology, FROTEC designs and
manufactures filtration products in liquid and gas & air, such as membrane pressure vessel, frp tank, uf
membrane, filter cartridge, filter housing and etc.

Our products are applied to bio-pharmaceutical, medical, food & beverage, microelectronic, chemistry,
electronics, water treatment and laboratory application.

With many years' experience in filtration,our products are best introduced by our partners in many countries
and areas, like the usa, canada, the uk, africa, europe, southeast asia, etc.
We aim at working together with our partners to protect our environment. we will continue to carry forward

2
 China Frotec Environmental Co., Ltd
the quality-first, pioneering and innovative spirit to manufacture and supply products with superior quality.

FROTEC ULTRA FILTRATION MEMBRANE

Ultra-filtration is an advanced technology to separate, purify and concentrate substance . It
presents hollow capillary tube shape or hollow fiber shape, micro-pore covers tube wall densely.
Feed liquid is flowing in or out the membrane under the influence of pressure, dissolvent or small
molecule can permeate membrane and become pure liquid by collection, while large molecule
(such as protein, each kind of enzyme, nucleic acid, polysaccharide and so on) ,colloid particle
(such as emulsion, micro-ion) and bacterium are cut off by the membrane and are taken off by
the circulating liquid flow to become concentrating liquid.

FROTEC ULTRA FILTRATION MEMBRANE 4040

Product Code Module Type A (mm) B (mm) C (mm) L1(mm)

UF-4040 UF-4040 101 19 27 1016

FROTEC ULTRA FILTRATION MEMBRANE 4046

Product Code Module Type A (mm) B (mm) C (mm) L1(mm) L2(mm)

UF-4046 UF-4046 169 113 112.5 965 1155

3
 China Frotec Environmental Co., Ltd

FROTEC ULTRA FILTRATION MEMBRANE 6060

Product Code Module Type A (mm) B (mm) C (mm) L1(mm) L2(mm)

UF-6060 UF-6060 195 160 160 1132 1352

FROTEC ULTRA FILTRATION MEMBRANE 8060

Product Code Module Type A (mm) B (mm) C (mm) L1(mm) L2(mm)

UF-8060 UF-8060 320 237 183.5 1020 1415

FROTEC ULTRA FILTRATION MEMBRANE 1060

Product Code Module Type A (mm) B (mm) C (mm) L1(mm) L2(mm)

UF-1060 UF-1060 323 303 173 1600 1713
4
 China Frotec Environmental Co., Ltd

Ultrafiltration membrane module parameters:

Module UF-4040 UF-4046 UF-6060 UF-8060 UF-1060

Inside-
Module type Inside-out Inside-out Inside-out Inside-out
out
PVC,epoxy PVC,epoxy PVC,epoxy PVC,epoxy PVC,epox
Shell and seal materials
resins resins resins resins y resins
Membrane Material PAN/PVC PAN/PVC PAN/PVC PAN/PVC PAN/PVC
Molecular Weight Cut off(
50.000 50.000 100.000 100.000 100.000
Dalton)
Ø200×14 Ø250×17
Size (mm) Ø90×1016 Ø90×1155 Ø160×1352
15 13
Effective membrane area 4m2 4.8m2 15m2 25m2 52m2
1.0mm/1.6m 1.0mm/1.6 1.0mm/1.6m 1.0mm/1. 1.0mm/1
Hollow fiber id/od size
m mm m 6mm .6mm
Max operating pressure 0.3Mpa 0.3Mpa 0.3Mpa 0.3Mpa 0.3Mpa
Suggest operating
<0.2Mpa <0.2Mpa <0.2Mpa <0.2Mpa <0.2Mpa
pressure
Max transmembrane
<0.2Mpa <0.2Mpa <0.2Mpa <0.2Mpa <0.2Mpa
pressure
0.05- 0.05- 0.05-
Backwash pressure 0.05-0.1Mpa 0.05-0.1Mpa
0.1Mpa 0.1Mpa 0.1Mpa
Produced water pollution
<3 <3 <1 <3 <3
index( SDI 25)
Initial flux 0.8m3/h 1.0m3/h 4.5m3/h 5m3/h 9m3/h
40- 40-
40- 40- 40-
Design flux 150L/m2/ 150L/m2
150L/m2/h 150L/m2/h 150L/m2/h
h /h
Cross flo
Cross flow o Cross flow Cross flow o Cross flow
w or dea
Operating mode r dead- or dead- r dead- or dead-
d-
end flow end flow end flow end flow
end flow
Bacteria removal rate >4log >4log >6log >6log >6log
Permeate turbidity <0.1NTU <0.1NTU <0.1NTU <0.1NTU <0.1NTU
Operating temperature 5~40℃ 5~40℃ 5~40℃ 5~40℃ 5~40℃
PH range 2~10 2~10 2~10 2~10 2~10

5
 China Frotec Environmental Co., Ltd

FROTEC MEMBRANE ELEMENTS

Residential membrane elements

Stable
Active membrane Average permeated Minimum
Model rejection
area ft2(m2) flow GPD(M3/D) rejectionrate(%)
rate(%)

RO1812-50 4.0(0.37) 50(0.19) 97.0 96.0

RO1812-75 5.0(0.46) 75(0.28) 97.0 96.0

RO2012-100 6.0(0.56) 100(0.38) 97.0 96.0

RO2812-200 11.0(1.04) 200(0.76) 97.0 96.0
RO3012-300 13.2(1.23) 300(1.13) 97.0 96.0
RO3012-400 13.2(1.23) 400(1.52) 97.0 96.0

Test Condition

Temperature of Testing Solution 25 °C

250ppm(1812-50,1812-75,2012-100)
Concentration of Testing Solution (Tap Wate
r) 500ppm(2812-200,3012-300,3012-400)
60psi(1812-50,1812-75,2012-100)
Testing Pressure
100psi(2812-200,3012-300,3012-400)
PH Value of Testing Solution 6.5-7
Recovery Rate of Single Membrane Element 15%

Operation Conditions

Max. Working Pressure 300psi

45°C
Max. Feedwater Temperature

Max. Feedwater SDI 5.0

PH Range of Feedwater during Continuous O
3~10
peration
PH Range of Feedwater during Chemical Cle
2~12
aning
6
 China Frotec Environmental Co., Ltd
10psi (0.07Mpa)
Max. Pressure Drop of Single Membrane Ele
ment

Industrial membrane elements

Ultra low pressure membrane element

ULP series can work under ultra low pressure to reach as high permeate flow and salt rejection
as regular low pressure membrane.It operates under approximately two thirds of the operating
pressure of regular low pressure composite membrane and achieves a good salt rejection.

Average
Operating Stable
Membrane permeated
Model pressure rejection
area ft2(m2) flow
psi(MPA) rate(%)
GPD(M3/D)
ULP4021 36(3.3) 150(1.05) 1000 (3.8 ) 99.0

ULP4040 78(7.2) 150(1.05) 2500 (9.8 ) 99.0

ULP8040 400(37) 150(1.05) 10500(39.5) 99.0

Test Condition
Temperature of Testing Solution:25 °C
Concentration of Testing Solution (NaCl):2,000ppm
PH Value of Testing Solution :7.5-8
Recovery Rate of Single Membrane Element:15%

Operation Conditions
Max. Working Pressure:600 psi (4.14MPa)
Max. Feedwater Temperature:45°C
Max. Feedwater SDI:5.0
Free Chlorine Concentration of Feedwater:0.1mg/L
pH Range of Feedwater during Continuous Operation:3~10
pH Range of Feedwater during Chemical Cleaning:2~12
7
 China Frotec Environmental Co., Ltd
Max. Pressure Drop of Single Membrane Element:10psi (0.07Mpa)

BW pressure membrane element

BW series has the properties of high permeate flow and excellent desalination.BW series is
mainly applicable to treatment of various industrial water.

Average
Operating Stable
Membrane permeated
Model pressure rejection
area ft2(m2) flow
psi(MPA) rate(%)
GPD(M3/D)
BW4021 36(3.3) 225(1.55) 900 (3.4) 99.5

BW4040 78(7.2) 225(1.55) 2500 (9.8 ) 99.5

BW8040 400(37) 225(1.55) 10500(39.7) 99.5

Test Condition

Temperature of Testing Solution:25 °C

Concentration of Testing Solution (NaCl):2,000ppm
PH Value of Testing Solution :7.5-8
Recovery Rate of Single Membrane Element:15%

Operation Conditions

Max. Working Pressure:600 psi (4.14MPa)

Max. Feedwater Temperature:45°C
Max. Feedwater SDI:5.0
Free Chlorine Concentration of Feedwater:0.1mg/L
pH Range of Feedwater during Continuous Operation:3~10
8
 China Frotec Environmental Co., Ltd
pH Range of Feedwater during Chemical Cleaning:2~12
Max. Pressure Drop of Single Membrane Element:10psi (0.07Mpa)

FROTEC PRESSURE TANK (FRP Tank)

Features
* Frotec frp tanks are made of high quality composite materials HDPE liner,
with blow molding technique,it
provides continuous seamless inner liner shell.

*Epoxy resin system and FRP filament winding outer shell,

which reinforces the liner and provides strong strength for high pressure application.

Operating Condition
* Operating Pressure: 150psi
* Operating Temperature : 49˚ C

Test
250.000times of cycle test from 10psi to 150psi withstanding pressure

Color
Natural , Blue ,Gray, Black and Blown , others are available on request.

Model Dia. X Height Top Open Bottom Open Mounting Liters

(mm) Mode
610 155×255 2.5"NPSM N/A Top 3.33
613 155×335 2.5" NPSM N/A Top 4.50
618 155×465 2.5" NPSM N/A Top 6.80
629 155×720 2.5" NPSM N/A Top 11.30
635 155×880 2.5" NPSM N/A Top 13.86
713 180×350 2.5" NPSM N/A Top 7.50
717 180×450 2.5" NPSM N/A Top 8.10
735 180×905 2.5" NPSM N/A Top 18.10
744 180×1135 2.5" NPSM N/A Top 24.25
813 205×335 2.5" NPSM N/A Top 7.90
817 205×438 2.5"NPSM N/A Top 11.20
824 205×620 2.5" NPSM N/A Top 17.10
835 205×890 2.5" NPSM N/A Top 24.80
844 205×1130 2.5"NPSM N/A Top 31.20
935 230×910 2.5" NPSM N/A Top 31.20
942 230×1090 2.5" NPSM N/A Top 38.30
948 230×1230 2.5"NPSM N/A Top 44.56
1013 255×340 2.5" NPSM N/A Top 13.10
1017 255×440 2.5" NPSM N/A Top 17.72
1024 255×635 2.5" NPSM N/A Top 25.80
1035 255×905 2.5"NPSM N/A Top 38.40
1044 255×1130 2.5" NPSM N/A Top 49.80
1054 255×1380 2.5" NPSM N/A Top 61.60
1248 300×1220 2.5" NPSM N/A Top 78.39
1252 300×1340 2.5" NPSM N/A Top 90.70
1354 335×1400 2.5" NPSM N/A Top 109.34
1465 355×1650 2.5" NPSM N/A Top 148.2

9
 China Frotec Environmental Co., Ltd

1665 405×1650 2.5" NPSM N/A Top 195.10

4"UN 4"UN Top / Side 203.1
1865 460×1650 2.5’’NPSM N/A Top 248.04
4"UN 4"UN Top / Side 256.00
2069 510×1750 4"UN N/A Top / Side 295.55

2069 510×1900 4"UN 4"UN Top / Side 301.20

2162 550×1750 4"UN N/A Top 315.77

2162 550×1900 4"UN 4"UN Top / Side 323.10

2472 620×1900 4"UN N/A Top 467.04

2472 620×2200 4"UN 4"UN Top / Side 470.10

3072 760×1900 4"UN N/A Top 715.20

3072 760×2100 4"UN 4"UN Top / Side 718.10

3072 760×2210 6"Flange 6"Flange Side 719.10

3672 910×1900 4"UN N/A Top 1012

3672 910×2200 4"UN 4"UN Top / Side 1018

3672 910×2250 6"Flange 6"Flange Side 1031

4272 1050×2250 6"Flange 6"Flange Side 1465

4872 1250×2200 6"Flange 6"Flange Side 1685

4886 1250×2400 6"Flange 6"Flange Side 2487

6086 1500x2400 6"Flange 6"Flange Side 2979

6367 1600×2100 6"Flange 6"Flange Side 2764

6386 1600×2500 6"Flange 6"Flange Side 3719

7296 1800x2400 6"Flange 6"Flange Side 5770

8096 2000x2400 6"Flange 6"Flange Side 7860

10
 China Frotec Environmental Co., Ltd
STRAINER

FROTEC STAINLESS STEEL MEMBRANE HOUSING

11
 China Frotec Environmental Co., Ltd

SMV25E(End Port)
Material: Stainless Steel 304, #316L
Housing tube type: Seamed/Seamless
End cap material: ABS/Stainless steel
Max. working pressure: 250psi
Inlet port:1/4’’, 3/8"
Outlet port: 1/4’’, 3/8"
Model: 2514,2521, 2540

SMV25S(Side Port)
Material: Stainless Steel 304, #316L
Housing tube type: Seamed/Seamless
End cap material: ABS/Stainless steel
Max. working pressure: 250psi
Inlet port:1/2’’
Outlet port: 1/4’’, 3/8"
Model: 2521, 2540

SMV40E(End Port)
Material: Stainless Steel 304, #316L
Housing tube type: Seamed/Seamless
End cap material: ABS/Stainless steel
Max. working pressure: 300psi
Inlet port: 3/4"
Outlet port: 1/2"
Model: 4021, 4040, 4080, 40120, 40160

SMV40S(Side Port)
Material: Stainless Steel 304, #316L
Housing tube type: Seamed/Seamless
End cap material: ABS/Stainless steel
Max. working pressure: 300psi
Inlet port: 3/4"
Outlet port: 1/2"
Model: 4021, 4040, 4080, 40120, 40160

SMV80E(End Port)
Material: Stainless Steel 304, #316L
Housing tube type: Seamless
End cap material: Stainless Steel
Max. working pressure: 300psi
Inlet port: 1 1/2"
Outlet port: 1"
Model: 8040, 8080, 80120, 80160,80200 ...

SMV80S(Side Port)
Material: Stainless Steel 304, #316L
Housing tube type: Seamless
End cap material: Stainless Steel
Max. working pressure: 300psi
Inlet port: 1 1/2"
Outlet port: 1"
Model: 8040, 8080, 80120, 80160,80200....

12
 China Frotec Environmental Co., Ltd
FROTEC FRP MEMBRANE HOUSING

MPV40E(End Port)
Material: FRP
Max. working pressure: 300psi, 450psi, 600psi, 800psi,1000psi
Inlet port: 3/4"
Outlet port: 1/2"
Model: 4021, 4040, 4080, 40120, 40160,40200

MPV40S(Side Port)
Material: FRP
Max. working pressure: 300psi, 450psi, 600psi, 800psi,1000psi
Inlet port: 3/4"
Outlet port: 1/2"
Model: 4021, 4040, 4080, 40120, 40160,40200

MPV80E(End Port)
Material: FRP
Max. working pressure: 300psi, 450psi, 600psi, 800psi,1000psi
Inlet port: 1 1/2"
Outlet port: 1"
Model: 8040, 8080, 80120, 80160,80200...

MPV80S(Side Port)
Material: FRP
Max. working pressure: 300psi, 450psi, 600psi, 800psi,1000psi
Inlet port: 1 1/2"
Outlet port: 1"
Model: 8040, 8080, 80120, 80160,80200...

13
 China Frotec Environmental Co., Ltd

FROTEC PLASTIC FILTER HOUSING

Specification

Flow rate and pressure loss depend on filter elements type

Inlet/outlet port: plastic or brass

Port size : PSH101—PSH056 1/4", 1/2", 3/4"

PSH107—PSH112 1/2", 3/4", 1"
PSH113—PSH114 3/8", 1/2", 3/4",1"
PSH115-PSH118 3/4", 1", 1.25",1.5"

PSH-101 PSH-102 PSH-103 PSH-104 PSH-055 PSH-056

PSH-107 PSH-108 PSH-109 PSH-110 PSH-111 PSH-112

PSH-113 PSH-114 PSH-115 PSH-116 PSH-117 PSH-118

FROTEC POLYPROPYLENE PLEATED FILTER CARTRIDGE

14
 China Frotec Environmental Co., Ltd

Features and Benefits

A. High surface area

B. Wide selection of micron rating to meet different filtration requirement
C. Increased dirt holding capacity.Longer service life
D. Constructed of all polypropylene high purity media,meets FDA requirements.
E. Multiple layered micro-porous construction ensures consistent filtration performance.
F. No adhesive,thermal bonded manufacturing enable the smallest contaminant extraction and
high durability.
G. Wide selection of micron rating to meet different filtration requirement.

Typical Application
A. Pre-filtration or RO system,DI water
B. Solvents,selected acids&lyes,chemical industry
C. Semiconductor,Eletronic industry ultrapure water system
D. FOOD and beverage,drinking water treatment
E. Oil industry

Specifications

Filter media Polypropylene

Support Layers Polypropylene
Micron rating 0.1,0.2,0.45,0.65,1.0,2.0,3.0,5.0,1
Material Of 0,30,50,70,100 μm
Construction Inner core Polypropylene
Outer cage,End Cap Polypropylene
Seal Method Thermal Bonded,No Adhesives
O-ring/Gaskets EPDM,Slicone,Buna,Viton
Cartridge Dimensions Outer Diameter 69mm(2.75”)
Inner Diameter 28mm(1.10”）
Length(Based on DOE End Cap) 10”-254mm,20”-508mm,30”-
762mm,40”-1016mm
Filtration Area(m2) 0.65m2 per 10”
Operating Conditions Normal Operating Temperature Up to 65℃ (140℉)
Max.Operating Temperature 90 ℃ (194 ℉ ) at P ≤ 1.0 bar
(14.5psi)
Forward Flow Direction 4.2 bar (60 psi) at 25℃ (77℉)
Reverse Flow Direction 2.1 bar (30psi) at 25℃ (77℉).
PH Value Compatibility 1-14
Sterilization Temperature Time Steam Sterilization for 30 minutes
at 121±2 ℃, 100 cycles,
Autoclave 30minutes (optional)

Cartridge Safety Endotoxin <0.25 EU/ml

Extractables 0.03g / 10"

15
 China Frotec Environmental Co., Ltd

Ordering Guide
Model PPF Micron Rating End Adaptor Configuration Seal Length

PPF-N(Nominal) 010: 0.1μm Code0-DOE( no end caps) E-EPDM 5"

PPF-A(Absolute) 022: 0.22μm Code 3 -SOE flat closed end/ 222 N-Buna 10"
045: 0.45μm Orings S-Silicone 20"
…….. Code 6-SOE flat closed end/226 V-Viton 30"
10: 1μm Orings 40"
30: 3μm Code 7 -SOE fin/ 222 orings
........ Code 8-SOE fin /226 orings

Other HOT Sale filters

16
 China Frotec Environmental Co., Ltd
PE FILTER MELT BLOWN FILTER

CTO FILTER GAC FILTER

STRIN WOUND FILTER HIGH FLOW FILTER

Other Conponents

17
 China Frotec Environmental Co., Ltd

High pressure switch Low pressure switch Bottom type Back type Back type with border

Flow meter RO system ozone machine

Brine tank Pump

Solenoid valve UV Sterilizer

18