Scribd Logo
Upload

Welcome to Scribd!

  • 329 views

    WRC-107 Lifting Trunnions - Vert. Lift

    Uploaded by

    Manoj Mulik
    This document outlines the 12 step procedure for performing WRC-107 calculations to determine the strength of a trunnion used for vertical lifting of a vessel. The steps include importing vessel data from a software program, selecting the trunnion analysis type, inputting vessel weight and number of trunnions to calculate loads, specifying trunnion dimensions and test parameters, running the analysis, and iterating the design if initial results fail criteria.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    WRC-107 Lifting Trunnions - Vert. Lift

    Uploaded by

    Manoj Mulik
    329 views5 pages
    This document outlines the 12 step procedure for performing WRC-107 calculations to determine the strength of a trunnion used for vertical lifting of a vessel. The steps include importing vessel data from a software program, selecting the trunnion analysis type, inputting vessel weight and number of trunnions to calculate loads, specifying trunnion dimensions and test parameters, running the analysis, and iterating the design if initial results fail criteria.

    Original Description:

    Lifting Trunnions

    Original Title

    WRC-107 Lifting Trunnions- Vert. lift

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines the 12 step procedure for performing WRC-107 calculations to determine the strength of a trunnion used for vertical lifting of a vessel. The steps include importing vessel data from a software program, selecting the trunnion analysis type, inputting vessel weight and number of trunnions to calculate loads, specifying trunnion dimensions and test parameters, running the analysis, and iterating the design if initial results fail criteria.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    329 views5 pages

    WRC-107 Lifting Trunnions - Vert. Lift

    Uploaded by

    Manoj Mulik
    This document outlines the 12 step procedure for performing WRC-107 calculations to determine the strength of a trunnion used for vertical lifting of a vessel. The steps include importing vessel data from a software program, selecting the trunnion analysis type, inputting vessel weight and number of trunnions to calculate loads, specifying trunnion dimensions and test parameters, running the analysis, and iterating the design if initial results fail criteria.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 5

    Page 1 of 5

    PROCEDURE OF WRC-107 CALCULATIONS FOR TRUNNION


    Vertical lift

    SKETCH

    Step 1 Note values from output file of PVElite, as shown below.

    Import data from PV elite

    Step 2 Open PVElite

    Step 3 In PV Elite, Click this button -->


    (To start design of lifting lug)

    Step 4 A new window "COADE CALC" will open, Go to Step 4

    File name:493102501.xls
    Page 2 of 5

    Step 4 Go to 'Analysis'→'Choose Analysis type'→'Legs and Lugs'


    As shown below in sketch

    Step 5 A new window will open. Click " +" new Item button

    Step 6 Fill in the data from Datasheet or PVElite output file and select trunnion in "Analysis Type" box
    as indicated below:

    File name:493102501.xls
    Page 3 of 5

    Input required

    By Program

    Step 7A Provide following values for calculating Axial Load, Normal Load, Tangential Load.
    Weight of Empty Vessel (From Step 1 and convert it into Newtons) W= 15000 N
    No. of Trunnions n= 2

    Load Per Trunnion W/n = 7500 N


    FOR VERTICAL LIFT ORIENTATION
    Axial Load, W/n = 7500 N
    Normal Load 5% of (W / n) = 375 N
    Tangential Load 5% of (W / n) = 375 N

    Step 7B Now click ">>" button as indcated above. New window "Dialog" will open. Fill in the
    specifications for trunnion (as calculated in Step 7A) and check in the box for WRC 107
    calculation as indicated in the figure below:

    Figure shown below helps selecting Dimension of trunnion

    File name:493102501.xls
    Page 4 of 5

    Step 8 Click OK in dialog window, click Load and fill in the vessel empty weight
    (from Step 1) and occasional load factor as shown below:

    Step 9 Now Save your program by clicking →

    Step 10 Analyze your program by clicking →

    File name:493102501.xls
    Page 5 of 5

    Step 11 Read at the end of Report.

    STEP 12 If the results are Fail. Go to Step 7B & try with different geometric dimensions.
    Unless you get passed.

    File name:493102501.xls

    You might also like