Scribd
Upload
38 views3 pages

Micro/Vickers Hardness (HV) Test Results

1. The document reports the results of a micro/Vickers hardness test performed on a part identified as f6. 2. Testing involved taking 19 indent measurements on the sample and calculating the hardness value (HV) at each point, with values ranging from 82.4 to 147.3 and an average of 126.1. 3. Additional information reported includes the machine used, measurement standard, sample dimensions, applied force, and statistics on the hardness values such as maximum, minimum, average, and variation.

Uploaded by

Mohamed Nasr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
38 views3 pages

Micro/Vickers Hardness (HV) Test Results

1. The document reports the results of a micro/Vickers hardness test performed on a part identified as f6. 2. Testing involved taking 19 indent measurements on the sample and calculating the hardness value (HV) at each point, with values ranging from 82.4 to 147.3 and an average of 126.1. 3. Additional information reported includes the machine used, measurement standard, sample dimensions, applied force, and statistics on the hardness values such as maximum, minimum, average, and variation.

Uploaded by

Mohamed Nasr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Micro/Vickers Hardness (HV) Test Results

Submitter Date Submitted


Part Name f6 Part # 6 h
# of Samples Sample Descri.
Qual. UL 650.0 Qual. LL 5.0

Machine ID Meas. Standard


Sample Cyl./Sph. Diam. Force（g） 25
（mm）

Test Results
# Depth Y D1 D2 Hard. Conver. # Depth Y D1 D2 Hard. Conver.
µm µm µm µm HV µm µm µm µm HV

1 28.3 27.2 120.7 20 26.9 25.9 133.0

2 26.8 26.9 128.9 21 26.3 26.4 133.6

3 27.7 27.3 122.7 22 26.8 25.5 135.8

4 27.7 27.2 123.5 23 27.8 27.2 122.5

5 25.6 24.5 147.3 24 33.6 33.5 82.4

6 28.3 27.5 119.2 25 27.1 26.3 130.3

7 27.1 26.1 131.4 26 27.6 26.6 126.4

8 26.2 26.9 132.0 27 27.2 26.4 128.9

9 27.5 25.6 131.5 28 27.4 25.5 132.9

10 29.0 28.1 113.8 29 28.0 26.3 126.2

11 26.1 25.8 137.6 30 28.0 26.7 123.8

12 25.7 26.1 138.5 31 31.8 32.1 90.7

13 26.1 26.6 133.7 32 28.6 29.5 109.8

14 27.3 25.6 132.4 33 26.3 26.7 132.1

15 27.9 25.9 128.0 34 26.4 26.7 131.4

16 26.8 27.2 127.5 35 28.3 27.6 118.4

17 26.3 27.0 130.9 36 27.0 26.4 130.0

18 27.4 26.5 127.7 37 27.7 26.5 126.3

19 27.7 26.9 124.5

Case Hardness(HV) Case Depth(µm)


Indent Images

1. 2. 3. 4.

5. 6. 7. 8.

9. 10. 11. 12.

13. 14. 15. 16.

17. 18. 19. 20.


Statistics
Maximum 147.3 Minimum 82.4
Average 126.1 Std. Dev. 1.9
Cp 55.87 Cpk 20.98

Operator Test Date Auditor Audit date


2020.9.24

You might also like