Typical Specifications: Model: Description Certifications
Typical Specifications: Model: Description Certifications
Typical Specifications: Model: Description Certifications
Model: AWB
Description: Fan shall be a wall mounted, belt driven, propeller exhaust fan.
Certifications: Fan shall be manufactured at an ISO 9001 certified facility. Fan shall be
listed by Underwriters Laboratories (UL 705) and UL listed for Canada (cUL
705). Fan shall bear the AMCA certified ratings seal for sound and air
performance.
Construction: Fan shall be of bolted and welded construction utilizing corrosion resistant
fasteners. The motor, bearings and drives shall be mounted on a 14 Ga.
steel power assembly. The power assembly shall be bolted to a minimum
14 Ga. steel wall panel with continuously welded corners and an integral
venturi. Unit shall bear an engraved aluminum nameplate. Nameplate
shall indicate design CFM, static pressure, and maximum fan RPM. Unit
shall be shipped in ISTA certified transit tested packaging.
Propeller: Propeller shall be cast aluminum airfoil design with cast aluminum hub.
The blade pitch shall be factory set and locked using set screws and roll
pin. The hub shall be keyed and locked to the shaft utilizing two set screws
or a taper lock bushing. Propeller shall be balanced in accordance with
AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans.
Motor: Motor shall be Nema design B with class B insulation rated for continuous
duty and furnished at the specified voltage, phase and enclosure.
Bearings: Bearings shall be designed and tested specifically for use in air handling
applications. Construction shall be heavy duty regreasable ball type in a
cast iron pillow block housing selected for a minimum L50 life in excess of
200,000 hours at maximum cataloged operating speed.
Belts and Drives: Belts shall be oil and heat resistant, static conducting. Drives shall be
precision machined cast iron type, keyed and securely attached to the
wheel and motor shafts. Drives shall be sized for 150% of the installed
motor horsepower. The variable pitch motor drive must be factory set to
the specified fan RPM.
1/12/12