Strainer Superflow

Strainer Applications
The pipeline strainers in this catalog have a wide range of industrial and marine applications. In addition to oil and
water service, the strainers detailed in this catalog are suitable for removing impurities from gasoline, chemicals,
paint, food process and many other process fluids. ALL PRODUCTS ARE DESIGNED AND MANUFACTURED
TO ASME SECTION VIII, DIV 1, CURRENT EDITION. U AND UM CODE STAMP AVAILABLE ON CERTAIN
PRODUCTS AS SPECIFIED IN THIS BROCHURE.
A strainer is an inexpensive "insurance" for protecting valuable pumps such as meter pumps, for example.
There is often unwanted matter present which can cause serious problems. Dirt, foreign matter, or even clumps of
product itself, can clog or damage critical and expensive equipment. Another factor to consider is the cost of
downtime. STRAINERS are the solution.
Strainer Applications
Water
The most popular application. From waste and water treatment, boiler feed pumps,
condensate service, irrigation and general and intermediate water service.
Steel Mills
Cooling water for furnaces, rolling mills, lubricating oil, fuel oil, etc.
Petrochemical
Refining crude oil to gasoline. Protection of pumps, meters, etc.
Utilities
Protection for heat exchangers, pumps, and condensers, strain cooling
water, screen transformer oil, etc.
Chemical Plants
Separation of solid impurities from liquids. Protection of process equipment.
Pulp and Paper

An industry which utilizes extensive filtration of water, coatings and pigments.
Marine
General filtration of seawater in cooling, sanitary, and general cleaning of lines.
Fuel, hydraulic fluid, lubricating systems, etc.
Process Equipment
Protection of vital equipment such as flow meters, spray nozzles, heat exchangers,
condensers, pumps, etc.
Other industrial applications include food processing, paint, cement, ink, pharmaceutical, cosmetics,
tank car and trucks, ceramics and many more.
If it flows, a strainer should be there!

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164
International 1-905-335-1350 International Fax: 1-905-332-4993 Page
Email: [email protected] www.sureflowequipment.com 1
Strainer Checklist
For your convenience, we list below some of the more common factors to take into account when selecting a strainer or filter.
Fluid to be strained Flow rate in GPM,

Working pressure in psi Maximum pressure in psi
Working temperature Maximum temperature
pH of fluid (Acid or Alkaline)
Strainer body material preferred
Strainer type: “Y” type; Basket; Duplex; Self-cleaning
Present pipeline size Pipe material
Nature of solids to be strained out
Size of solids to be strained out Size mesh required
Limitation on clearance in proposed strainer location: Above Below
Maximum pressure drop that can be tolerated, with dirty screen psid
Expected cleaning frequency: Daily; Weekly; Monthly; Other
OTHER ITEMS THAT MAY BE OF BENEFIT TO THE APPLICATION
Pressure gauges to show when clean-out is required
Isolating valves to facilitate strainer clean-out
Manual or automatic blow-down valve
Other comments
Most pump, nozzle, valve and instrument specifications will Mesh Thousandths* Microns Mesh Thousandths* Microns
give maximum size of solids that can be passed. See screen 16 0.045" 1143 60 0.010" 254
mesh opening table on right to select appropriate screen. 20 0.032" 813 80 0.008" 203
30 0.021" 533 100 0.005" 127
Screen opening should be approximately 1/3 to 1/2 the size 200 0.003" 76
40 0.016" 406
of maximum allowable solids size. *use numbers after decimal point for strainer part number suffix
The Universe of Industrial Valves from Sure Flow

Duplex Y-Strainers/
Strainers Custom Screens
Pump
Connectors Basket Strainers
Check Valves
Butterfly Valves Knife Gate
Valves
Knife
Gate
Valves
Ball
Valves
Fabricated Sanitary Dual
Basket Strainers
Elastic
Swing
Strainers Sanitary Check
Strainers Valves

Y Strainers
“Y” Strainers take their name from their configuration. They are most commonly used in
pressurized lines, gas or liquid, but can also be used in suction or vacuum conditions. They
are intended for applications where small amounts of solid particulate are expected, and where
clean-out will be infrequent. If solids will flush easily from the screen, and fluid can be exhausted
to atmosphere, a blow-down valve on the drain port will allow clean-out without removal of the
screen, and without interrupting the process flow.
A A
B B
C
A. Pressure gauges to indicate clogged screen
B. Isolation valves for servicing strainer
C. Optional manual or auto blow-down
Flow Rate vs Pressure Drop

Y-Type Strainers - Threaded Y-Type Strainers - Flanged
1000
9 9
8 8
7 7
6
6 3" 5
5 1" 4 20"
4
22 3 18"
16"
3 2" 2 14"
1" 12"
2 1 2 10,000 9
10"
8
11"
4
7
6 8"
5
100 4
9
8
1 3
6"
7 5"
6 3" 2
Liquid Flow (Water) GPM
5 4 4"
3 12 "
4 1,000 9
3"
8
3 7 2 12"
Liquid Flow (Water) GPM
6
5
2 4 2"
Strainer Size
2
10
9 1 12 "
8 100 9
7 8
Strainer Size
6 7
6
5 5
4
4
3
3
2
2
10
.2 .3 .4 .5 .6 .7.8.91 2 3 4 5 6 7 8 910 2
.1
1 Pressure Drop psi
.1 .2 .3 .4 .5 .6 .7 .8 .9 2 3 4 5 6 7 8 9 10
Pressure Drop psi

Y Strainers
Cast Iron NPT Threaded, Cast Bronze NPT Threaded & Sweat End
Types T250G Cast Iron & TB150 & TB300 Bronze, TB150SW
Features
Sure Flow threaded strainers in Cast Iron and Cast Bronze
feature a machined, tapered seat which ensures a perfect fit
for the removable, stainless steel screen. All sizes come
complete with NPT blow-off with plug, which can be replaced
with a ball valve for on-line blow-down of particulate.
Construction
Cast Iron - Body, cover, plug - High Tensile ASTM
A126 Class B Cast Iron
All screens are Stainless Steel
Cast Bronze - Body, cover, plug - ASTM B62 Bronze
Operating Pressures and Temperatures

Standard Screens Type Size PSI @ Temp PSI @ Temp
Size Std. Opening Steam* WOG
T250G 1/4" - 3" 250 400°F 400 150°F
1/4" - 2" 20 mesh 0.032"
TB150 1/4" - 3" 150 358°F 300 150°F
2 1/2" - 3" 3/64" perf 0.045"
TB300 1/2" - 3" 300 400°F 400 150°F
A
Dimensional Data
Shipping
Size A B Blow-Off NPT Weight (lbs)
TB
Inches Prefix TB150 TB150SW T250G TB300 TB150 TB150SW T250G TB300 TB150 150SW T250G TB300 TB150 &
T250G TB300
NPT
Threaded 1/4 0025 3 7/32 3 11/12 2 5/8 2 5/32 2 3/8 2 3/8 3/8 1/4 2
3/8 0038 3 7/32 3 11/12 2 5/8 2 5/32 2 3/8 2 3/8 3/8 1/4 2
Inlet
1/2 0050 3 7/32 3 11/12 3 1/4 3 2 5/32 2 3/8 2 1/4 2 5/16 3/8 3/8 1/4 3/8 2 1/2 2 1/2
B 3/4 0075 3 15/16 4 11/32 3 3/4 3 7/16 2 3/4 2 3/4 2 5/8 2 1/2 3/8 3/8 1/2 3/8 3 3
1 0100 4 17/32 5 4 4 1/16 2 15/16 3 3/16 2 3/4 3 1/8 1/2 1/2 1/2 3/4 5 6
Body
1 1/4 0125 5 11/32 5 29/32 5 4 7/8 3 9/16 3 23/32 3 3/4 3 5/8 1/2 1/2 3/4 3/4 9 9
*Screen
*Gasket 1 1/2 0150 6 7/32 6 29/32 5 13/16 5 3/4 3 27/32 4 1/8 4 4 1/8 1/2 1/2 3/4 3/4 10 11
Cover 2 0200 7 1/2 8 21/32 7 6 3/4 5 7/16 5 3/16 5 5 1/2 1/2 1 3/4 16 19
NPT Blow Off
*Denotes Recommended Spare Parts C/W Plug 2 1/2 0250 9 1/16 9 5/16 7 1/2 5 29/32 6 5 1/4 1/2 1 1/2 1 1/4 29 29
3 0300 10 7/32 10 1/8 8 1/2 6 9/32 7 6 1/2 1/2 1 1/2 1 1/4 38 42
Ordering Information Notes

Example: Include full description Manufacturer reserves
Size Model *Screen the right to modify
(Prefix) Number Opening dimensions, materials, or
0150 - T250G - 032 design. Contact factory
for certification.
1 1/2" NPT, Y Strainer, Cast Iron,
20 Mesh Screen *Must specify if for steam
service.

International Y Strainers
Cast Iron NPT Threaded
Type T250J Cast Iron

Features
Sure Flow threaded strainers in Cast Iron feature a machined
seat which ensures a perfect fit for the removable, stainless
steel screen. All sizes come complete with NPT blow-off with
plug, which can be replaced with a ball valve for on-line blow-
down of particulate.
Construction
Cast Iron - Body, cover, plug - High Tensile ASTM A126
Class B Cast Iron
Operating Pressures and Temperatures Standard Screens

Type Size PSI @ Temp PSI @ Temp Model Size Std. Opening
Steam* WOG
T250J 1/4" - 2" 20 mesh 0.032"
T250J 1/4" - 3" 250 400° F 400 150°F 2 1/2" - 3" 3/64" perf 0.045"
A Dimensional Data
Shipping
Size A B Blow-Off
Size Inches Prefix
Weight
NPT NPT (lbs)
Flow 1/4 0025 3 3/16 2 1/16 3/8 4

1/2 0050 3 3/16 2 1/16 3/8 5
3/4 0075 3 3/4 2 7/16 1/2 6
1 0100 4 2 5/8 1/2 8
1 1/4 0125 5 3 3/8 3/4 13
B
1 1/2 0150 5 3/4 3 7/8 3/4 15
2 0200 7 4 3/4 1 24
2 1/2 0250 9 1/4 5 7/8 1 1/2 37
3 0300 10 6 1 1/2 48
Ordering Information
Example: Include full description
Size Model *Screen
(Prefix) Number Opening
0200 - T250J - 005
2" Threaded Y Strainer, Cast Iron, 250# Class,
20 Mesh Screen with 100 Mesh liner
Notes
Manufacturer reserves the right to modify dimensions,
materials, or design. Contact factory for certification.
*Must specify if for steam service.

Y Strainers
Cast Steel & Cast 316SS, NPT Threaded
Types YT6 Cast Steel and YT6SS Cast 316SS
(or Socket Weld Ends “SW”)
Features
Threaded strainers in Cast Steel and Cast Stainless Steel
are rated for up to 1480 psi for Water, Oil or Gas. A machined,
tapered seat ensures a perfect fit for the removable, stain-
less steel screen. All sizes come complete with blow-off and
plug, which can be replaced with a ball valve for on-line blow-
down of particulate.
Construction
Cast Steel - Body, cover, plug - Carbon steel ASTM
SPEC A216 Grade WCB
Stainless Steel - Body, cover, plug, - ASTM SPEC A351
Grade CF8M
Type Size PSI @ Temp PSI @ Temp Size Std. Opening
Steam* WOG 1/2" - 1" 20 Mesh 0.032"
YT6 1/2" - 3" 600 486°F 1480 100°F 1 1/4" to 2" 1/32" perf 0.032"
YT6SS 1/2" - 3" 600 486°F 1440 100°F 2 1/2" to 3" 3/64" perf 0.045"
A
Dimensional Data
Size A B C Blow-Off Shipping
Size NPT
NPT or Inches Prefix
YT6 YT6 YT6 YT6 Weight
Socket Weld YT6SS YT6SS YT6SS YT6SS lbs.
Inlet Outlet
1/2 0050 3 1/4 2 3/16 3 1/4 4
3/4 0075 3 5/8 2 3/4 3 1/4 1/4 5
1 0100 4 1/4 3 3/16 4 1/8 1/2 6
B 1 1/4 0125 5 1/4 3 7/8 5 1/2 8
C
1 1/2 0150 6 1/4 4 3/4 5 7/8 1/2 10
Clearance 2 0200 7 5/8 6 8 1/8 3/4 18
for Screen 2 1/2 0250 8 3/8 7 8 3/4 1 1/4 25
Removal
3 0300 9 1/2 8 1/2 10 1 1/4 30

Example: Include full description For higher temperature service other gas-
Size Model *Screen ket materials are available upon request.
(Prefix) Number Opening Manufacturer reserves the right to modify
0150 - YT6SS - 032 dimensions, materials, or design. Contact
factory for certification.
1 1/2”NPT, Y Strainer, 316SS, For socket weld add suffix “SW” to model
20 Mesh Screen number.

Y Strainers
High Pressure, NPT Threaded
Type T1500 Cast Steel & Stainless Steel
(or Socket Weld Ends “SW”)
Features
The spiral wound, welded stainless steel construction of the
screen provides high strength, preventing screen collapse.
Continuous slot openings reduce bridging of particles; under-
sized solids pass freely through the “V” shaped slots without
clogging.
Construction
The high strength, cast chrome-moly body and o-ring seal are
designed for higher pressure applications. If all stainless steel
construction is needed, add “SS”’ to the series number shown
below after the screen mesh designation.
Operating Pressures and Cast Steel - Body, cover, plug - ASTM-A487-4N

Stainless Steel - Body, cover, plug - ASTM A351, Grade CF8M
Temperatures All Screens are Stainless Steel
Type Size PSI @ Temp
WOG
Standard Screens
Size Std. Opening
T1500 1/2" - 2" 3000 450°F
T1500SS 1/2" - 2" 3000 450°F 1/2" - 2" Slotted 0.032"
Screen
A
Dimensional Data
Shipping
Size A B Blow-Off Weight
Inches Prefix NPT (lbs)
Flow 1/2 0050 5 1/8 4 3/4 1/4 10
3/4 0075 5 1/8 4 3/4 1/4 10
1 0100 5 1/8 4 3/4 1/4 10
1 1/2 0150 7 1/2 7 3/4 25
B
2 0200 9 5/8 8 3/8 3/4 40
Body
Screen
O-ring Plug

Example: Include full description Manufacturer reserves the right to
modify dimensions, materials, or
Size Model *Screen
(Prefix) Number Opening design. Contact factory for
certification.
0150 - T1500SS - 032 For socket weld add suffix “SW”
1 1/2" NPT, High Pressure Y Strainer, to model number.
Cast Stainless Steel, 0.032" Slotted
Screen

Y Strainers
Cast Iron, Flanged
Type YFC125 & YFC250 Cast Iron with ANSI Flanges

Features
Sure Flow Cast Iron Flanged Strainers feature a machined,
tapered seat which ensures a perfect fit for the removable,
stainless steel screen. All sizes come complete with flanged
blow-off cover, gasket & plug. May be installed in vertical or
horizontal pipelines with blow-off connection at the lower end of
the screen.
Construction
Cast Iron - Body, cover, plug - High Tensile ASTM A126
Class B Cast Iron
Type Size PSI @ Temp PSI @ Temp
Steam* WOG
YFC125 2" - 12" 125 344°F 200 150°F
Standard Screens 14" -24" 100 328°F 150 150°F
Size Std. Opening YFC250 2" - 12" 250 400°F 400 150°F
14" - 24" 125 344°F 300 150°F
2" - 3" 3/64" perf 0.045"
4" - 24" 1/8" perf 0.125" Dimensional Data
Shipping Weight
Size A B Blow-Off NPT (lbs)
Inches Prefix YFC125 YFC250 YFC125 YFC250 YFC125 YF250 YFC125 YFC250
A 2 0200 9 7/8 11 5/8 6 1/4 6 1/2 1 1/2 1/2 36 40
2 1/2 0250 11 1/4 11 1/4 7 5/8 7 1 1 48 52
3 0300 12 1/2 12 5/8 8 1/4 8 1 1/4 1 86 86
INLET
4 0400 14 7/8 15 1/2 10 1/8 10 3/4 1 1/4 1 1/4 106 160
OUTLET
5 0500 17 15/16 19 1/4 12 1/2 13 1/2 1 1/2 1 1/4 156 210
6 0600 18 3/4 20 1/4 13 16 1/4 1 1/2 1 1/2 201 401
8 0800 21 1/4 25 13 7/8 19 1/2 2 1 1/2 321 620
10 1000 28 28 1/2 17 1/8 21 1/4 2 2 370 710
12 1200 34 33 3/4 20 1/2 25 2 2 621 1120
B 14 1400 37 3/8 37 5/8 29 29 1/2 2 2 1084 1300
16 1600 42 1/2 38 5/8 33 33 1/2 2 2 1615 2200
18 1800 46 1/8 47 5/8 35 1/2 36 1/2 2 2 1/2 2600 2800
20 2000 54 1/2 36 3/4 2
Note: On sizes 4” and below, drain is centered.

Example: Include full description Manufacturer reserves the
Size Model *Screen right to modify dimensions,
(Prefix) Number Opening materials, or design. Contact
0400 - YFC125 - 125
*Must specify if for steam
4” FLGD, Y Strainer, Cast Iron, service.
125# ANSI Flanges with 1/8" Perf
Screen

International Y Strainers
Cast Iron & Ductile Iron, Flanged
Type YF125J Cast Iron & YF250J Ductile Iron with
ANSI Flanges Features
Sure Flow Cast Iron and Ductile Iron Flanged Strainers
feature a machined seat which ensures a perfect fit for
the removable, stainless steel screen. All sizes come
complete with flanged blow-off cover, gasket & plug.
May be installed in vertical or horizontal pipelines with
blow-off connection at the lower end of the screen.
Construction
Cast Iron - Body, cover, plug - High Tensile
ASTM A126 Class B Cast Iron.
Ductile Iron - Body, cover, plug – High Tensile
ASTM A536 CI. 65-45-12

Model Size Std. Opening
Steam* WOG YF125J 2" - 3" 3/64" perf 0.045"
4" - 20" 1/8" perf 0.125"
YF125J 2"-12" 125 344° F 200 150° F
YF250J 2" - 4" 1/16" perf 0.063"
14"-20" 100 328° F 150 150° F
5" - 12" 1/8" perf 0.125"
YF250J 2"-12" 250 450° F 500 150° F
Dimensional Data
A Shipping Weight
Size A B Blow-Off NPT (lbs)
Inches Prefix YF125J YF250J YF125J YF250J YF125J YF250J YF125J YF250J
2 0200 7 7/8 8 5/8 7 7 1/8 1/2 1/2 21 34
INLET OUTLET 2 1/2 0250 10 10 5/8 9 3/4 8 7/8 1 1 32 54
3 0300 10 1/8 12 10 9 7/8 1 1 39 72
4 0400 12 1/8 14 1/2 12 12 1/16 1 1/2 1 1/2 69 114
5 0500 15 5/8 16 3/8 17 16 1/4 2 2 110 174
6 0600 18 1/2 19 5/16 20 19 3/8 2 2 153 204
8 0800 21 5/8 23 3/8 22 3/4 22 3/16 2 2 284 432
B 10 1000 25 3/4 27 3/8 28 27 3/8 2 2 426 660
12 1200 29 7/8 32 30 29 1/4 2 2 667 978
14 1400 33 1/4 36 1/2 2 992
16 1600 38 3/4 42 2 1,587
Clearance for 18 1800 43 1/8 45 1/2 2 2,612
Screen Removal 20 2000 49 1/2 54 2 2,910

(Prefix) Number Opening materials, or design. Contact
0400 - YF125J - 125 factory for certification.
4” FLGD, Y Strainer, Cast Iron, 125# ANSI
Flanges, with 1/8" Perf Screen
service.

Y Strainers
Cast Bronze, Carbon Steel, Cast 316SS, 150# Flanged
Type YF150B Cast Bronze, YFC150 Cast Steel, YFC150SS Cast Stainless Steel
Features
Sure Flow 150# ANSI Flanged strainers are available in Carbon
Steel, Stainless Steel and Bronze. A machined, tapered seat
ensures a perfect fit for the removable, stainless steel screen. 2”
and larger come complete with flanged blow-off cover, gasket &
plug. 1 1/2” and smaller come complete with solid threaded cover
and gasket. May be installed in vertical or horizontal pipelines with
Construction
Carbon Steel - Body & Cover, ASTM SPEC A216, Grade WCB
Stainless Steel - Body & Cover, ASTM SPEC A351, Grade
CF8M
Bronze - Body & Cover, ASTM SPEC B62-Bronze

Size Std. Opening
Steam* WOG
YF150B 1/2" - 12" 150 358°F 225 150°F 1/2" - 1 1/2" 1/32" perf 0.031"
YFC150 1/2" - 12" 150 358°F 285 100°F 2" - 3" 3/64" perf 0.045"
YFC150SS 1/2" - 12" 150 358°F 275 100°F 4" - 12" 1/8" perf 0.125"
Dimensional Data
A Shipping
1/2 0050 6 2 9/16 Opt. 9
3/4 0075 7 1/2 3 Opt. 11
1 0100 7 3/8 3 3/8 Opt. 15
Inlet 1 1/2 0150 7 1/4 4 3/4 Opt. 18
2 0200 8 5/8 4 7/8 1/2 30
2 1/2 0250 10 1/4 7 1/2 3/4 44
3 0300 11 5/8 7 3/4 1 60
Body 4 0400 14 3/8 9 1/8 1 1/2 96
B 5 0500 17 5/8 11 2 150
*Screen NPT Blow-Off 6 0600 18 5/8 13 3/8 2 174
c/w Plug
8 0800 24 3/8 14 5/8 2 264
*Gasket
Cover Bolting 10 1000 26 17 1/4 2 414
Sizes 1/2" Thru 12" *Denotes Recommended Spare Parts
12 1200 30 3/8 21 2 615

the right to modify
Size Model *Screen dimensions, materials, or
design. Contact factory
0400 - YFC150SS -125 for certification.
4” FLGD, Y Strainer, Cast Stainless Steel, *Must specify if for steam
150# ANSI Flanges with 1/8" Perf Screen service.

Y Strainers
Cast Steel & Cast 316SS, Flanged
YFC300 Cast Steel, YFC300SS Cast Stainless Steel, with 300# ANSI Flanges
Features
Sure Flow 300# ANSI Flanged strainers are available in
Carbon Steel and Stainless Steel. A machined, tapered seat
ensures a perfect fit for the removable, stainless steel screen.
2” and larger come complete with flanged blow-off cover,
gasket & plug. 1 1/2” and smaller come complete with solid
threaded cover and gasket. May be installed in vertical or
horizontal pipelines with blow-off connection at the lower end
of the screen.
Construction
Stainless Steel - Body & Cover, ASTM SPEC A351, Grade CF8M
Steam* WOG
YFC300 1" - 12" 300 417°F 740 100°F 1" - 3" 3/64" perf 0.045"
YFC300SS 1" - 12" 300 417°F 720 100°F 4" - 12" 1/8" perf 0.125"
Dimensional Data
A Shipping
1 0100H 7 13/16 3 5/8 24
1 1/2 0150 7 9/16 4 3/8 27
2 0200 9 3/4 6 1/8 1/2 47
Inlet 2 0200H 9 3/4 6 1/8 1/2 50
2 1/2 0250 10 11/16 7 7/16 1 64
3 0300 12 9/16 9 1 1/4 87
3 0300H 13 1/2 7 3/4 1 1/4 94
Body 4 0400 14 5/8 11 1 1/2 165
B 4 0400H 16 5/8 10 3/4 1 1/2 170
*Screen NPT Blow-Off
c/w Plug 5 0500 18 1/2 15 3/8 2 186
*Gasket 6 0600 19 3/4 15 1/2 2 260
Cover Bolting 8 0800 25 16 1/4 2 385
Sizes 1/2" Thru 12" *Denotes Recommended Spare Parts 10 1000 29 1/8 19 1/4 2 610
12 1200 33 3/4 24 2 1300

(Prefix) Number Opening materials, or design. Con-
tact factory for certification.
0400 - YFC300SS -125
4" FLGD, Y Strainer, Cast Stainless “H” denotes dimensions
Steel, 300# ANSI Flanges with 1/8" similar to Hayward.
Perf Screen *Must specify if for steam
service.

Y Strainers
Type YFC600 Cast Steel & YFC600SS Cast Stainless Steel,
with 600# ANSI Flanges
Features
Sure Flow 600# ANSI Flanged strainers are available in Carbon
Steel and Stainless Steel. They provide very economical
protection for Water, Oil or Gas service up to 1235 psig for
stainless, and 1480 psig for carbon steel. A machined, tapered
seat ensures a perfect fit for the removable, stainless steel
screen. May be installed in vertical or horizontal pipelines with
Construction
Carbon Steel - Body & Cover, ASTM SPEC A216, Grade
WCB
CF8M
Steam* WOG
YFC600 2" - 12" 600 486°F 1480 100°F 2" - 3" 3/64" perf 0.045"
YFC600SS 2" - 12" 600 486°F 1440 100°F 4" - 20" 1/8" perf 0.125"
A Dimensional Data
Size A B Blow-Off Shipping
Weight
2 0200 11 6 1/8 1/2 53
2 1/2 0250 12 7 1/4 3/4 79
3 0300 13 1/2 8 1 100
Inlet
4 0400 17 15/16 9 3/8 1 1/2 210
5 0500 22 1/4 12 3/8 2 330
6 0600 25 5/8 17 1/4 2 410
Body 8 0800 31 3/4 18 1/2 2 834
B
*Screen 10 1000 37 11/16 21 5/8 2 1200
NPT Blow-Off
c/w Plug 12 1200 45 1/2 26 3/4 2 1445
*Gasket
Cover Bolting
Sizes 1/2" Thru 12" *Denotes Recommended Spare Parts

(Prefix) Number Opening dimensions, materials,
or design. Contact
0400 - YFC600SS - 125 factory for certification.
4", Y Strainer, Cast Stainless Steel,
Screen

Y Strainers
Type YFC1500 Cast Steel & YFC1500SS Cast Stainless
Steel, with 1500# ANSI Flanges
Features
Sure Flow 1500# ANSI Flanged strainers are available in
Carbon Steel and Stainless Steel. They provide very
economical protection for Water, Oil or Gas service up to 3600
psig for stainless, and 3705 psig for carbon steel. A machined,
tapered seat ensures a perfect fit for the removable, stainless
steel screen. May be installed in vertical or horizontal pipelines
with blow-off connection at the lower end of the screen.
Blow-off or drain to be NPT or socket welded. Please specify.
Construction
CF8M
Steam WOG
YFC1500 2" - 8" 1500 596°F 3705 100°F 2" - 3" 3/64" perf 0.045"
YFC1500SS 2" - 8" 1500 596°F 3600 100°F 4" - 8" 1/8" perf 0.125"
A
2 1 Dimensional Data
Shipping
Size A B C Weight
Inches Prefix (lbs)
Inlet Outlet 2 0200 15 1/4 11 11/16 15 3/4 140
3 0300 20 1/4 14 1/2 19 3/4 290
4 0400 23 1/4 18 1/8 26 480
6 0600 30 5/8 22 7/16 29 1/2 1,078
8 0800 39 27 37 1/2 1,560
B Item Description
7
1 Cast Body
3 2 Screen
4 3 Gasket
4 Drain (Drain to be NPT or Socket Weld)
6 C 5 Bolting
5 Clearance for 6 Cover
Screen Removal 7 Name Plate

or design. Contact
0400 - YFC1500SS - 125 factory for certification.
4", Y Strainer, Cast Stainless Steel,
Screen

ASME Section VIII, Div 1,
Y Strainers
High Pressure, Socket Weld
Current Edition:
U and UM CODE STAMP
Available
Type YBC2500 Forged Steel & Stainless Steel High

Pressure Strainer Features
The wedge wire stainless steel construction of the screen
provides high strength, preventing screen collapse. Continuous
slot openings reduce bridging of particles while undersized
solids pass freely through the wedge wire stainless steel screen
without clogging.
Construction
The high strength forged carbon steel or stainless steel
construction is designed for higher pressure applications. If all
stainless steel construction is needed, add “SS”’ to the model
number. Stainless steel spiral wound gasket is standard.
No Name Material Qty

1 Body SA 516 GR. 60 or stainless steel 1
2 Cover SA 516 GR. 60 or stainless steel 1
3 Bolting SA 193 B7 or stainless steel 4
4 Gasket Spiral Wound 1
5 Screen Wedge Wire S.S. 1
Operating Pressures and
Temperatures Standard Screens
Size Std. Opening
Max Temp 1000°F
1/2" - 3" Slotted Screen 0.032"
Max Pressure 10,000 PSI
Dimensional Data
Shipping
Size A B C Drain Weight
Inches Model Size (lbs)
C A 1/2 0050YBC2500SW 6 1/4 6 3 1/2 1/2 124
Ref. Only
Inlet/Outlet 1 3/4 0075YBC2500SW 6 5/8 6 1/4 3 3/4 3/4 124
Size
Socket 1 0100YBC2500SW 7 1/4 7 4 3/4 124
Weld
OUTLET 1 1/4 0125YBC2500SW 7 3/4 7 1/2 4 1/4 3/4 140
INLET 1 1/2 0150YBC2500SW 8 1/4 7 3/4 4 1/2 3/4 140
2
2 0200YBC2500SW 9 1/4 8 1/2 5 1 140
3 2 1/2 0250YBC2500SW 11 9 1/2 6 1 190
B Ref. Only 3 0300YBC2500SW 14 12 8 1 190
5
4 Drain Size
Socket Weld

Example: Include full description Manufacturer reserves the right
Size Model *Screen to modify dimensions, materials,
(Prefix) Number Opening or design. Contact factory for
0150 - YBC2500SW -032 certification.
1 1/2" SW, High Pressure Y Strainer,
Forged 516 GR 60 Steel,
0.032" Slotted Screen

Y Strainers - High Pressure
Cast 316SS & Chrome-Moly (NPT Threaded or Socket Weld)
Type YT1500SSBC Stainless Steel and
YT1500CMBC Chrome-Moly (or Socket Weld ends - SW)
Sure Flow 1500# Flanged Strainers are available in
Stainless Steel and Chrome-Moly WC6. A bolted cover
allows a quick, easy screen removal process. Sure
1
Flow Strainers provide a very economical protection of
unwanted or foreign particles. A machined, tapered
2 seat ensures a perfect fit for the removable stainless
3 steel screen. May be installed in vertical or horizontal
pipelines with blow-off connections at the lower end of
4 screen.
5 Blow-off drain to be NPT or socket welded. Please
D specify.
A
Construction
No Name Material Qty
1 Cast Body A351 CF8M or A217 WC6 1
2 Gasket Spiral wound flexitallic 1
C 3 Cover Flange A351 CF8M or A217 WC6 1
B
Clearance 4 Screen 316SS Perf 1
for Screen 5 Bolting SA 193 B7 Hex Bolt 4
Removal
Standard Screens
Size Std. Opening
1/2 - 2” 1/32 perf 0.032
2-1/2 - 3” 3/64 perf 0.045
Operating Pressures and Temperatures Dimensional Data

Size
Type Size PSI @ Temp PSI @ Temp Inches Model A B C D
Steam WOG
1/2 0050 3 5/8 3 1/2 4 3/4 3 1/2
YT1500SSBC 1/2 to 3” 1500 596°F 3600 100°F 3/4 0075 4 1/4 4 3/4 5 1/2 4 1/8
YT1500CMBC 1/2 to 3” 1500 596°F 3750 100°F 1 0100 4 7/8 5 3/8 6 1/8 4 5/8
1-1/2 0150 6 3/8 6 5/8 8 1/8 6 3/8
2 0200 8 9/16 9 10 3/4 7 1/4
Ordering Information 2-1/2 0250 9 9 1/4 11 7 3/4
Example: Include full description 3 0300 9 5/8 10 13 8 1/2
Size Model *Screen
(Prefix) # Opening
0200 - YT1500SSBC - .045
Notes
Manufacturer reserves the right to modify
2”, Y Strainer, Cast Stainless Steel, 1500# dimensions, materials, or design. Contact
ANSI Flanges with 3/64” Perf Screen factory for certification.

Basket Strainers
Basket Strainers feature top removal of the screen. The screen is in the form of a basket, with a lifting handle,
so that all particulate captured and retained by the screen can be easily removed for disposal. They are
intended for applications where larger amounts of solid particulate are expected, and where clean-out will be
frequent. Most models have a standard or optional “Quick Release Cover” to allow fast and easy screen
removal without the use of tools. For easily flushable solids, a modified cone-bottom basket can be fitted, with
automatic or manual blow-down through the drain port. This will allow clean-out without removal of the screen,
and without interrupting the process flow.
A A
B B
A. Pressure gauges to indicate clogged screen

B. Isolation valves for servicing strainer
10 10
9 9
8 8
SIZE (inches) 3/8 1/2 3/4 1 11/4 11/2 2 2 1/2 3
7 7
6 6
5 5
4 4
Threaded Basket 3 3
Strainers
Pressure Drop psi

2 2
1. Cv 1.
.9 .9
Pressure Drop Table .8
.7
.8
.7
.6 .6
.5 .5
.4 .4
.3 .3
.2 .2
.1
LIQUID FLOW (WATER) GPM .1

4 5 6 7 8 9 10 2 3 4 5 6 7 8 9 100 2 3 4 5 6 7 8 9 1000 2 3
20" 18" 16" 14" 12" 10" 8" 6" 5" 4" 31/2" 3" 21/2" 2" Strainer Size
2
10
9
8
7
6
5
Flanged Basket
Pressure Drop - psi
4
3
Strainers 2
1
.9
Pressure Drop Table .8
.7
.6
.5
.4
.3
.2
.1
1,000 9
8
7
6
5
4
3
2
9
8
7
6
5
4
3
100 9
8
7
6
5
4
3
2
9
8
7
6
5
4
3
2
10,000
10
LIQUID FLOW (WATER) GPM

Current Edition:
U and UM CODE STAMP
Available
Cast Simplex Strainers
Cast Iron, NPT Threaded
BTC125 Cast Iron, Swivel Clamp Cover

Features
Sure Flow Basket Strainers feature top removal of the screen. The
screen is in the form of a basket, with a lifting handle, so that all
particulate captured and retained by the screen can be easily
removed for disposal. They are intended for applications where
larger amounts of solid particulate are expected, and where clean-
out will be frequent. Models are standard with “Swivel Clamp
Cover” to allow fast and easy screen removal without the use of
tools. Basket and cover both have BUNA-N O-ring seals eliminating
the need to change gaskets each time the strainer is serviced.
Construction
Item Desc. Material Qty
1 Cover ASTM A126 Cast Iron 1
2 Clamp ASTM A126 Cast Iron 1
3 Bolting SAE J429 Grade 2 Zinc Plated 2
4 O-Ring BUNA-N 1
5 Cast Body ASTM A126 Cast Iron 1
6 Basket Assembly Stainless Steel Construction 1
7 Drain Plug ASTM A126 Cast Iron 1
Standard Screens
1/2” to 3” .032 Perf
C
3
Steam WOG
BTC125 3/8" - 3" 125 344°F 200 150°F
D
Size Prefix A B C D E Drain Shipping
Weight
Inlet (lbs)
Outlet
3/8 0038 5 1/4 3 9/16 5 7/16 6 3/8 7 1/2 18

4 1/2 0050 5 1/4 3 9/16 5 7/16 6 3/8 7 1/2 22
E 3/4 0075 5 1/4 3 5/8 5 7/16 6 7/8 7 5/8 1/2 25
A 5
1 0100 5 1/4 3 5/8 5 7/16 6 7/8 7 5/8 1/2 26
1 1/4 0125 7 3/8 4 1/4 5 7/8 8 3/8 9 3/4 3/4 29
6
1 1/2 0150 7 3/8 4 1/4 5 7/8 8 3/8 9 3/4 3/4 32
7
2 0200 7 1/8 5 1/4 6 5/8 9 5/8 9 3/4 1 44
B c/w cover and quick opening clamp assembly 2 1/2 0250 8 5/8 6 3/4 8 3/16 12 3/4 12 1 1/2 82
3 0300 12 6 3/4 8 5/16 13 1/4 15 3/4 1 1/2 96
Example: Include full description Manufacturer reserves the right to modify
dimensions, materials, or design. Contact
Size Model *Screen
(Prefix) Number Opening factory for certification.
Optional Features
0150 - BTC 125 - 016 • Baskets with any chosen perforations
1-1/2" NPT, Basket Strainer, • Baskets are available in other materials
Cast Iron, 40 Mesh Screen • Replaceable inserts available from
20 to 300 mesh.
*Must specify if for steam service.

Cast Simplex Strainers Current Edition:

U and UM CODE STAMP
Available
Cast Bronze, Cast Steel & Cast Stainless Steel, NPT Threaded
SBT150B Bronze, SBT150SS Stainless Steel
& SBT150 Cast Steel
Features
Sure Flow Basket Strainers feature top removal of the screen. The
screen is in the form of a basket, with a lifting handle, so that all
particulate captured and retained by the screen can be easily removed
for disposal. They are intended for applications where larger amounts
of solid particulate are expected, and where clean-out will be frequent.
Models are standard with “Quick Release Cover” to allow fast and easy
screen removal without the use of tools. Basket and cover both have
BUNA-N O-ring seals (Viton for stainless steel), eliminating the need to
change gaskets each time the strainer is serviced.
Construction
Bronze Body & Cover, ASTM SPEC B62-Bronze
Carbon Steel Body & Cover, ASTM SPEC A216, Grade WCB
Stainless Steel Body & Cover, ASTM SPEC A351, Grade CF8M
Standard Screens
Perf Sizes: 3/32”. Others POA.
A
Steam WOG
SBT150B 3/8" - 3" 150 358°F 225 150°F
SBT150SS 3/8" - 3" 150 358°F 275 100°F
D SBT150 3/8" - 3" 150 358°F 285 100°F
INLET
Dimensional Data
Size A B C D E F Shipping
Weight
(CLEARANCE FOR Inches Prefix (lbs)
BASKET REMOVAL)
E 3/8 0038 4 4 6 5/8 2 7/8 11 3/8 10
1/2 0050 4 4 6 5/8 2 7/8 11 3/8 10
3/4 0075 5 3/8 5 8 3/8 4 13 1/2 18
1 0100 5 3/8 5 8 3/8 4 13 1/2 18
C
1-1/4 0125 6 3/4 5 7/8 9 7/8 4 7/8 14 1/2 30
1-1/2 0150 7 6 1/2 10 5/8 6 14 7/8 3/4 30
B
2 0200 8 1/2 7 1/2 11 5/8 7 1/2 17 3/8 1 1/4 50
2-1/2 0250 11 1/2 9 1/8 15 1/4 8 22 3/8 1 1/4 62
3 0300 11 1/2 9 1/8 15 1/4 8 22 3/8 1 1/4 62
F NPT
Notes
Manufacturer reserves the right to modify
Ordering Information dimensions, materials, or design. Contact
Example: Include full description factory for certification.
Optional Features
Size Model *Screen
(Prefix) Number Opening • Baskets with any chosen perforations
• Baskets are available in other materials
0150 - SBT150SS - 016 • Gauge tappings if required
1-1/2" NPT, Basket Strainer, • Replaceable inserts available from 20 to
Cast Stainless Steel, 300 mesh.
40 Mesh Screen *Must specify if for steam service.

Current Edition:
U and UM CODE STAMP
Available
Basket Strainers
Cast Iron, Flanged
Type BF125C Cast Iron & BFC125C with
Quick Release Cover, 125# ANSI Flanges
Features
Sure Flow 125# ANSI Flanged basket strainers in Cast Iron are
available with bolted or quick release clamped cover. Clamp
cover units (Model BFC) are ideally suited for applications
where frequent clean-out of the basket is expected. Having a
spare, clean basket on hand will greatly reduce the cleaning
time, and differential pressure gauges, with alarms, can be
supplied to get the maximum on-stream time between cleaning
cycles.
Construction
Body & Cover, ASTM SPEC A126, Class B
Baskets are Stainless Steel
Standard Screens
Size Std. Opening
Operating Pressures and Temperatures 2" – 3" 3/64” perf 0.045"
Type Size PSI @ Temp 4" – 20" 1/8” perf 0.125"
WOG
BF125C 2" - 20" 150 150°F
Dimensional Data
Clear-
BFC125C 2" - 12" 50 150°F Size Blow ance Shipping
Off For Bskt Weight
Inches Prefix A B C D NPT Removal (lbs)
2 0200 8 1/8 5 3 3/4 7 1/2 3/4 5 3/8 34
A 2 1/2 0250 8 1/4 5 3/8 4 5/16 8 3/4 6 5/16 43
3 0300 9 7/8 6 1/2 4 8 3/4 8 60
4 0400 11 1/2 8 6 9/16 10 1/2 1 9 5/16 120
D 5 0500 13 1/8 8 7 11 1/2 1 10 1/4 140
6 0600 14 7/8 8 5/8 6 5/8 12 1 11 1/8 164
C
8 0800 18 11/16 11 3/4 9 15 1 15 9/16 330
Flow 10 1000 20 1/8 13 3/4 10 1/2 15 1 18 470
12 1200 26 1/4 16 3/8 13 1/8 17 1/2 1 23 1/4 820
14 1400 30 1/4 22 3/8 14 1/2 — 2 26 1/4 1300
B 16 1600 33 1/8 23 5/8 15 9/16 — 2 28 1/8 1600
18 1800 38 3/8 28 3/8 16 — 2 33 3/8 2260
20 2000 41 1/2 32 3/8 17 3/8 — 2 37 3/8 2980
NPT
Drain

right to modify dimensions,
Size Model *Screen
0400 - BFC125C - 125 *Must specify if for steam
4" FLGD, 125# ANSI Flanges, service.
Basket Strainer, Cast Iron,
with 1/8" Perf. Screen & Quick
Release Cover

Basket Strainers Current Edition:

U and UM CODE STAMP
Available
Cast Bronze, Carbon Steel, Cast 316SS, 150# Flanged
Type BF150B Cast Bronze, BF150 Cast Steel & BF150SS Cast
Stainless Steel Features
Sure Flow150# ANSI Flanged basket strainers are available
in Cast Bronze, Cast Steel and Cast Stainless Steel. For
contaminant that is easily flushable from the screen, a valve
can be supplied for the blow-off port.
Construction
Bronze - Body & Cover, ASTM SPEC B62-Bronze
WCB
CF8M

WOG
Standard Screens BF150B 2" - 12" 225 150°F
Size Std. Opening BF150 2" - 12" 285 100°F
BF150SS 2" - 12" 275 100°F
2" – 3" 3/64 perf. 0.045"
4" – 12" 1/8 perf. 0.125"
Dimensional Data
D
Size Blow Clearance Shipping
A B C Off For Bskt Weight
A Inches Prefix NPT Removal (lbs)
2 0200 8 1/8 8 3/8 5 1 5 3/8 34
2 1/2 0250 8 3/4 10 5 3/4 1 6 5/16 43
3 0300 9 7/8 11 1/4 6 1/2 1 8 60
4 0400 11 1/2 13 1/2 8 3/4 1 9 5/16 120
5 0500 13 1/8 14 5/8 8 7/16 1 10 1/4 140
B 6 0600 14 7/8 15 5/8 9 1 11 1/8 164
Flow 8 0800 18 11/16 21 12 1/8 1 15 9/16 330
10 1000 20 1/8 24 1/2 13 3/4 1 18 470
12 1200 26 1/4 29 3/4 16 3/8 1 23 1/4 820
C Larger sizes available. 1" and 1 1/2" available. Consult factory.
NPT
Drain

0400 - BF150SS - 125
4", Basket Strainer, Cast Stainless service.
Steel, 150# ANSI Flanges,
with 1/8" Perf. Screen

Current Edition:
U and UM CODE STAMP
Available
Basket Strainers
Cast Steel, Cast 316SS, 300# Flanged
BF300 Cast Steel & BF300SS Cast Stainless Steel
Features
Sure Flow 300# ANSI Flanged basket strainers are available
in Carbon Steel and Stainless Steel. For contaminant that is
easily flushable from the screen, a valve can be supplied for the
blow-off port.
Construction
WCB
CF8M

WOG
Standard Screens BF300 2" - 12" 740 100°F
Size Std. Opening BF300SS 2" - 12" 720 100°F
2" – 3" 3/64 perf. 0.045"

4" – 12" 1/8 perf. 0.125"
Dimensional Data
D
Size Blow Clearance Shipping
A B C Off For Bskt Weight
Clearance A Inches Prefix NPT Removal (lbs)
for screen
removal A 2 0200 8 1/2 5 7/16 5 3/8 1 13 1/4 50
2 1
D 2 1/2 0250 8 11/16 6 7/16 5 3/8 1 15 3/8 72
2 3 0300 9 9/16 7 6 3/4 1 17 5/8 90
4 0400 11 3/4 8 3/16 8 1/16 1 21 160
6 0600 14 3/4 9 1/2 8 3/4 1 23 3/4 240
3
8 0800 18 1/8 11 1/8 11 7/8 1 29 1/8 350
B 10 1000 22 7/8 13 13 15/16 1 34 1/2 550
12 1200 25 3/8 14 3/4 16 9/16 1 40 948
INLET OUTLET 4
Item Description
1 Gasket
2 Bolting
C 3 Cover
4 Basket
5 5 Cast Body
6 Drain Plug
6

0400 - BF300SS - 125
4", Basket Strainer, Cast Stainless service.
Steel, 300# ANSI Flanges,
with 1/8" Perf. Screen

Fabricated Basket Strainers
Current Edition:
U and UM CODE STAMP
Available
Carbon Steel
Type BWEB150 Carbon Steel, BWEB150SS Stainless Steel
Sure Flow Fabricated Flange Basket Strainers were initially
developed for the petrochemical market. With continuous
success it has now become a standard product off shelf on
most sizes. Its unique quick-opening closure and venting
allow the field operator, in a timely and safe fashion, to
remove the basket for cleaning. An o-ring seal provides
positive sealing of the cover.
Type Size PSI @Temp
WOG
BWEB150 2” - 24” 100 @ 150 °F
BWEB150SS 2” - 24” 100 @ 150 °F
Construction
No Description
1 O-Ring Gasket, BUNA-N standard (Viton, EPDM optional)
2 Quick Open Eye Bolts
3 Cover Plate
4 Ring Flange
A 5 Outlet Nozzle
Face to Face 6 Differential Conn.
7 Body
8 Inlet Nozzle
Standard Screens
Size Std. Opening
1 2” - 3” 3/64 perf 0.045”
Vent
4” - 12” 1/8 perf 0.125”
Clearance
for Basket Conn. 2
Removal
D
Dimensional Data
3
Size Body
B 4 Inches Model A B C D
Size
Flow 2 0200 4” 10 7 11 22
5
2 1/2 0250 4 11 7 1/2 11 25
6 3 0300 6 12 7 7/8 13 26
4 0400 6 12 8 5/8 13 27
C 7 5 0500 8 14 7/8 9 3/8 17 31 1/2
6 0600 8 14 7/8 10 17 32 1/2
6 0600 10 18 3/4 10 5/16 20 36
8 0800 10 18 3/4 11 3/8 20 38
Side Drain
8 0800 12 20 1/8 11 7/8 23 40 3/4
Bottom NPT Drain
10 1000 12 21 1/8 13 1/8 23 44
10 1000 14 25 3/8 13 1/4 26 46
12 1200 14 25 3/8 15 3/8 26 51
Ordering Information Notes 12 1200 16 27 5/8 16 5/16 29 55
Example: Include full description Manufacturer 14 1400 16 27 5/8 16 5/16 29 55
reserves the 14 1400 18 29 1/8 17 3/8 32 60
Size Model *Screen 16 1600 18 29 1/8 17 3/8 32 60
(Prefix) # Opening right to modify
16 1600 20 33 5/8 19 34 64
dimensions, 18 1800 20 33 5/8 19 34 64
0200 - BWEB150SS - .045 materials, or 18 1800 24 38 5/8 20 3/4 39 70
2", Basket Strainer, Stainless Steel, 150# design. 20 2000 24 38 5/8 21 5/8 39 72
Contact factory 24 2400 30 46 24 3/8 45 83
ANSI Flanges with 3/64" Perf Screen, Side
for certification.
Drain

Current Edition:
U and UM CODE STAMP
Available
Type BW Carbon Steel
& BWSS Stainless Steel
with ANSI Flanges
Features & Construction
Sure Flow Fabricated Flanged Basket Strainers can be designed to
your specific application in Carbon Steel or Stainless Steel. 1 1/2" to
24" pipe sizes in 150# and 300#. ANSI flanges are standard, with
the capability to supply larger pipe sizes, or 600#, 900#, 1500# and
2500# ANSI ratings. Basket size can be tailored to hold sufficient
solids for the required time between clean-outs. Flange sizes can
be chosen to fit existing piping, or to achieve the required clean
pressure drop. Maintenance reducing features include Automatic
Flush and Hinged Cover, with or without Davit Assembly.
Dimensional Data
Size A B C D
Inches Prefix
1 1/2 0150 8 7 8 17
Model BW150/BW150SS and BW300/ 2 0200
2 1/2 0250
8
8 3/4
7
7
8
9
19
21
Clearance
for basket
A BW300SS 3 0300 9 7/8 7 11 23
A 4 0400 11 1/2 8 13 27
removal 3
2 5 0500 13 1/8 9 15 30
D 1 Item Description
2 4 6 0600 14 7/8 9 17 33
1 Vent Assembly 8 0800 18 11/16 9 20 39
2 Gasket 10 1000 20 1/8 13 23 42
3 Bolting 12 1200 26 1/4 14 26 50
B 4 Cover
14 1400 34 17 29 55
5 5 Inlet/Outlet Flange
16 1600 36 18 32 59
6 Body Assembly
7 Basket 18 1800 42 20 34 63
INLET 8 Drain Assembly 20 2000 44 21 39 69
OUTLET
24 2400 48 26 45 87
*Larger sizes available. Consult factory.
6 Operating Pressures and Temperatures

C
Type Size PSI @ Temp PSI@ Temp
7 Steam WOG
BW150 1 1/2" - 24" 150 366°F 285 100°F
BW150SS 1 1/2" - 24" 150 366°F 275 100°F
8 BW300 1 1/2" - 24" 300 422°F 740 100°F
BW300SS 1 1/2" - 24" 300 422°F 720 100°F
[Section through center line] Manufacturer reserves the right to modify dimensions,

Current Edition:
Fabricated Basket Strainers U and UM CODE STAMP

Available
Type BWH150 & BWH300 with Quick Opening Hinged Cover

A Dimensional Data
Size A B C D
A 1 Inches Prefix
2
D
1 1/2 0150 12 6 1/8 8 17
Clearance 2 0200 12 6 5/8 8 19
for 2 1/2 0250 12 7 1/8 9 21
basket
removal 3 0300 12 1/2 7 3/8 11 23
B 2
4 0400 12 3/4 8 1/8 13 27
5 0500 15 3/8 9 1/8 15 30
6 0600 15 3/4 9 5/8 17 33
INLET OUTLET Item Description 8 0800 18 1/4 11 3/8 20 39
1 Quick Opening Cover 10 1000 20 3/4 13 5/8 23 42
2 Inlet/Outlet Flange 12 1200 22 15 5/8 26 50
3 Body Assembly 14 1400 27 17 1/8 29 55
4 Basket 16 1600 28 19 1/8 32 59
3 5 Drain Assembly 18 1800 35 21 1/8 34 63
C
20 2000 41 23 7/8 39 69
4 24 2400 44 26 5/8 45 87
Manufacturer reserves the

5 right to modify dimensions,
materials, or design. Contact
Quick Opening Davit

Blind flange
in open position
Turn clockwise to
open strainer
Turn counter clockwise
to close strainer
Numerous quick-opening covers,

which conform to the ASME Boiler
A and Pressure Vessel Code, are
available from Sure Flow.
To the left is the “Davit
Assembly” which is usually
used on larger, custom
B
FLOW
products in order to
facilitate screen removal.
Flanged The cover simply lifts and
or NPT
Drain swings, a function easily
C
performed by a technician.
Refer to page 26 for other
Strainer options.


Current Edition:
U and UM CODE STAMP
Available
Type Class 600 Model BW600/BW600SS Strainers

A
Dimensional Data
A Size A B C D
2 Inches Prefix
3
2 0200 10 7 3/4 8 22
1
2 2 1/2 0250 12 9 1/4 9 25
D 4
Clearance 3 0300 12 9 5/8 11 28
for basket
removal 4 0400 15 11 7/8 13 32
5 0500 18 13 15 38
B
6 0600 18 14 1/2 17 45
5 8 0800 21 16 3/4 20 50
10 1000 23 18 3/4 23 58
INLET OUTLET 12 1200 25 20 26 63
Item Description 14 1400 31 21 3/4 29 70
16 1600 33 24 32 78
1 Vent Assembly
6 2 Gasket 18 1800 39 25 1/2 34 80
C 3 Bolting 20 2000 46 28 39 90
7 4 Cover 24 2400 58 42 45 120
5 Inlet/Outlet Flange *Larger sizes available. Consult factory.
6 Body Assembly
8 7 Basket
8 Drain Assembly
[Section through center line]
Steam WOG
BW600 2" - 24" 600 489°F 1480 100°F
BW600SS 2" - 24" 600 489°F 1440 100°F
Standard Screens
To be specified - sizes available in stainless steel material:
Perforated Sheet: 1/32, 3/64, 1/16, 3/32, 1/8, 3/16, 1/4, 1/2
Mesh Lined: 20, 30, 40, 60, 80, 100, 120, 160,
200 - and down to 5 microns

Example: Include full description • Higher ANSI pressure ratings available
Size Model *Screen • Auto or manual blow-down feature available
BW = Bolted Cover
BWH = Hinged Cover Manufacturer reserves the right to modify dimensions,
0400 - BWH600SS - 125 materials, or design. Contact factory for certification.
Basket Strainer, Stainless Steel, 4", 600# ANSI
Flanges, with 1/8" Perf. Screen & Hinged Cover

Strainer Options
Davit Assembly
Flanged or NPT
Offset Vent Assembly
Inlet/Outlet
Inlet
Outlet
Quick Opening
T-Bolt Closure
Leg Flanged or
or NPT
Assembly (3) Drain Double Bolt
Flanged or NPT Legs are Vertical/Horizontal
Side Drain spaced apart at Closure
120° intervals
Inlet
Flow Flow
Differential Outlet
Oversized Pressure
Body Connections
Optional Features
• Quick opening covers
• Body materials of stainless steel or special alloys
• Custom Baskets: of 316 SS steel, monel, and special alloys
• Davit Assembly
• Larger sizes available
• Single or multiple baskets
• Oversized body design to reduce pressure drop
• Automatic air vent
• Pressure gauges or differential pressure switch
• Special internal and external coatings
• Many codes & designs are available
Special Construction
• Backwash connections
• High pressure 600 lb, 900 lb, 1500 lb, and 2500 lb
• Special perf or mesh as low as 5 microns

Fabricated Basket Strainers, Flanged
40,000
30,000
20,000
24"
20"
10,000
9,000
8,000 18"
7,000
16"
6,000
5,000
14"
4,000
12"
3,000
10"
2,000
8"
Flow Rate (Water) GPM
1,000
900 6"
800
700
600
4"
500
400
300
3"
200
2 1/2"
2"
100
90
80
70 1 1/2"
60
50
40
1"
30
20
10
.1 .2 .3 .4 .5 .6 .7 .8 .9 1 2 3 4 5 6 7 8 9 10
Pressure Drop PSI

Fabricated Dual Basket Strainers
Dual Basket Strainers
Cast Iron, Carbon Steel, Stainless Steel
Sure Flow Dual Basket Strainers are an innovative and economical alternative to conventional Duplex Strainers.
They are designed for applications where flow cannot be shut down to service the strainer screen. Changeover
is accomplished by use of a handwheel operator on a buna lined (standard), butterfly valve. This arrangement
provides a bubble-tight shut off between basket chambers, essential for use in gas or negative head pump
suction systems. Basket and flange sizes can be designed to specific requirements by incorporating Sure Flow
Fabricated Strainers. Standard units are in Cast Iron with 125# ANSI flanged connections, and Carbon or Stain-
less Steel with 150# ANSI flanged connections. Many other options are available including higher pressure
ratings, automatic air vents, quick opening covers, special internal coatings, backwash connections and more.
We will help you select the best Sure Flow Dual Basket Strainer for your specific application.
Sure Flow Model BDB bolted design

Dual Basket Strainer is standard in Cast
Iron with 125# ANSI flanged connec-
tions in sizes 2" through 18". Baskets
can be supplied with bolted or quick
release clamped covers.
Consult factory for dimensional data

and other specifications.
Sure Flow Model DB welded design Dual

Basket Strainers are a very economical
alternative to standard uni-casting duplex
strainers in cast steel and stainless steel
materials. Because they are fabricated to
your specific requirements, they are
available in up to 2500 lb ANSI ratings, and
with your choice of valves.

1 3
4 Type BDB125 Bolted Dual
2
Basket Strainer - Cast Iron
INLET OUTLET Slave Linked Butterfly's
Dimensional Data
Size
Inches Prefix A B C D E
E
2 0200 30 10 1/2 5 6 9
2 1/2 0250 32 3/4 11 5 3/8 6 1/2 10
Item Description
3 0300 36 11 1/2 6 1/2 7 11
1 Inlet Manifold
2 Slave Linkage
4 0400 42 12 8 7 1/2 13
D 3 Check Valves 5 0500 48 12 1/2 8 8 15
4 Outlet Manifold 6 0600 52 13 8 5/8 8 1/2 16
5 Butterfly Valves
3 6 Strainers 8 0800 61 14 1/2 11 3/4 9 1/2 18
10 1000 70 3/4 17 13 3/4 11 22
A 12 1200 83 19 16 3/8 12 1/2 24
C 5 14 1400 96 1/2 20 22 1/4 13 1/2 28
16 1600 104 3/4 21 23 1/4 14 1/2 30
B 18 1800 123 3/4 23 24 15 37
Standards: ANSI B16.5
Design Code: ASME B31.1
C Max. Working Pressure: 200 psig
10" Max. Working Temperature: 200°F
Hydrostatic Test: 300 psig for 1/4 hour
Service: W.O.G.
6 Manufacturer reserves the right to modify dimensions, materials, or design.
Contact factory for certification.
A
Face to Face Type DBH150/DBH150SS
1 1 Fabricated Dual Basket Strainer
- Carbon Steel, Stainless Steel
2 3 OUTLET
Manual Butterfly showing leg
INLET
2 3 B assembly - hinge cover and drain
valve - manual butterfly
Size
A B C D
Inches Prefix
Item Description 2 0200 36 5/8 15 8 10 7/8
1 Inlet/outlet Manifold 2 1/2 0250 39 18 8 11 3/8
2 Butterfly Valves 3 0300 41 3/4 20 1/4 9 11 5/8
3 Check Valves
4 Differential 4 0400 46 3/4 25 1/4 11 12 3/8
D
Connection 6 0600 59 7/8 34 1/4 15 13 1/2
Flow 8 0800 72 3/8 43 1/2 17 17 3/4
10 1000 82 7/8 53 20 18 7/8
12 1200 94 7/8 63 26 20 1/2
C 14 1400 106 71 29 23 1/2
Optional
Leg 16 1600 114 5/8 79 1/2 32 29 *Larger
Assembly
Optional 18 1800 125 7/8 88 34 30 sizes
Drain available.
Valve 20 2000 142 97 1/2 39 32 Consult
24 2400 162 1/2 114 45 36 factory.

A
1 2
REF.
2 1
Type BDB125 Dual Basket
Strainer with Four Manual
D REF.
INLET OUTLET
Butterfly’s - Cast Iron
E
Dimensional Data
Size
A B C D E
Inches Prefix
2 0200 29 5/8 8 1/2 5 6 9
2 1/2 0250 32 9 5 3/8 6 10
6 3 0300 35 5/8 9 1/4 6 1/2 6 11
6 4 5
4 0400 41 3/4 10 8 6 13
Item Description
2
5 0500 47 5/8 10 1/2 8 8 15
2 1 Flanged Tee
2 Butterfly Valve 6 0600 51 3/8 11 8 5/8 6 16
3 Strainer Ass'y 8 0800 59 9/16 13 1/4 11 3/4 9 1/4 18
3 4 Studs
5 Hex. Nuts 10 1000 69 5/8 14 1/2 13 3/4 22
6 Flanged 90°
Elbow
12 1200 80 1/2 16 16 3/8 24
B REF.
Flow Also available is our model BDBC125 with clamp

covers. Consult factory for details.
C Manufacturer reserves the right to modify dimensions,
A
Face to Face
Type DBH150/DBH150SS
1 1
Dual Basket Strainer
Slave Linked Butterfly’s
with Hinged Covers
2 3 OUTLET
INLET
2 3 B Dimensional Data
Size A B C D
Inches Prefix
5 5 2 0200 36 5/8 15 8 10 7/8
2 1/2 0250 39 18 8 11 3/8
4 Item Description
3 0300 41 3/4 20 1/4 9 11 5/8
1 Inlet/Outlet
Manifold 4 0400 46 3/4 25 1/4 11 12 3/8
2 Butterfly Valves 6 0600 59 7/8 34 1/4 15 13 1/2
3 Check Valves
D 4 Slave Linkage 8 0800 72 3/8 43 1/2 17 17 3/4
5 Differential 10 1000 82 7/8 53 20 18 7/8
Connection
Flow 12 1200 94 7/8 63 26 20 1/2
14 1400 106 71 29 23 1/2
16 1600 114 5/8 79 1/2 32 29
C
Optional 18 1800 125 7/8 88 34 30
Leg 20 2000 142 97 1/2 39 32
Assembly
Optional
Drain 24 2400 162 1/2 114 45 36
Valve *Larger sizes available. Consult factory.


C
B Type DB150 Short Face to
Face Dual Basket Assembly
Dimensional Data
A Size
Face A B C D E
Inches Prefix
to
Face 2 0200 10 1/4 35 3/8 17 11/16 21 10
2 1/2 0250 11 3/4 37 1/8 18 9/16 22 1/2 10
3 0300 12 1/2 38 1/4 19 1/8 23 10
3 3
4 0400 14 1/2 45 1/8 22 9/16 27 1/2 11
2 5 0500 17 52 7/8 26 7/16 30 12
Inlet
6 0600 18 3/4 54 7/8 27 7/16 32 13
1 8 0800 22 1/4 64 3/8 32 3/16 37 15
1
Flow 10 1000 25 1/4 74 37 42 18
12 1200 29 1/4 83 1/2 41 3/4 47 1/2 21
14 1400 32 1/4 91 5/8 45 13/16 52 23
E D 16 1600 34 1/4 97 7/8 48 15/16 54 25
Flow 18 1800 38 1/4 108 7/8 54 7/16 60 27
20 2000 41 1/2 123 5/8 61 13/16 65 29
24 2400 46 1/4 144 77 74 34
Drain
Assembly 2 Outlet Drain Item Description
4 4
Assembly 1 Strainer Assembly
2 Inlet/outlet Manifold Manufacturer reserves the right to modify
3 Butterfly Valves dimensions, materials, or design. Contact
4 Check Valves factory for certification.
C
B
Item Description
Type DB150
INLET 1 Knife Gate Valves
2 Quick Opening Knife Gate operated
Cover
FACE
TO A
3 Strainer Assembly
4 Check Valves
Dual Basket Assembly
FACE
5 Inlet Manifold
6 Outlet Manifold Class 150
Dimensional Data
OUTLET Size A B C D E F
1 1
Inches Prefix
OPEN 2 0200 10 1/4 33 1/2 16 3/4 23 5/8 10 6 5/8
CLOSED
2 1/2 0250 11 3/4 35 17 1/2 24 5/8 10 7 1/8
2 2 3 0300 12 1/2 37 1/8 18 9/16 24 7/8 10 7 3/8
4 0400 14 1/2 39 1/2 19 3/4 27 5/8 11 8 1/8
5 2 5 0500 17 47 23 1/2 30 12 9 1/8
F 3
6 0600 18 3/4 50 3/8 25 3/16 32 13 9 5/8
FLOW
8 0800 22 1/4 61 30 1/2 37 3/8 15 11 3/8
10 1000 25 1/4 70 35 43 5/8 18 13 5/8
D
E 12 1200 29 1/4 79 1/4 39 5/8 50 21 15 5/8
14 1400 32 1/4 87 43 1/2 54 5/8 23 17 1/8
16 1600 34 1/4 94 47 60 5/8 25 19 1/8
DRAIN
FLOW DRAIN 18 1800 38 1/4 102 51 65 27 21 1/8
20 2000 41 1/2 117 3/4 58 7/8 71 29 23 7/8
4 6 4 24 2400 46 1/4 134 1/2 67 1/4 80 5/8 34 26 5/8
Manufacturer reserves the right to modify dimensions, materials, or design.
Contact factory for certification.

Fabricated Y Strainers
Type FW150/FW300 Carbon Steel & FW150SS/FW300SS
Stainless Steel Y Strainer with
ANSI Flanges
Sure Flow Fabricated Flanged ‘Y’ Strainers can be designed
to your specific application in Carbon Steel or Stainless Steel.
1 1/2" to 24" pipe sizes in 150# and 300# ANSI flanges are
standard, with the capability to supply larger pipe sizes, 600#,
900#, 1500# and 2500# ANSI ratings. Screen sizes can be
tailored to hold sufficient solids for the required time between
clean-outs. Flange sizes can be chosen to fit existing piping,
or to achieve the required clean pressure drop. Hinge covers
are also available for quick opening. Available in any material.
Please contact factory for details.

Type Size PSI @ Temp PSI @ Temp To be specified: sizes available in stainless steel material:
Steam WOG Perforated Sheet: 1/32, 3/64, 1/16, 3/32, 1/8, 3/16, 1/4, 1/2
FW150 1 1/2" - 24" 150 366°F 285 100°F Mesh Lined: 20, 30, 40, 60, 80, 100, 120, 160,
FW150SS 1 1/2" - 24" 150 366°F 275 100°F 200 - and down to 5 microns
FW300 1 1/2" - 24" 300 422°F 740 100°F
FW300SS 1 1/2" - 24" 300 422°F 720 100°F
Type FW150/FW300 and FW150SS/FW300SS

A
Item Description
Dimensional Data
1 2 Size A B C
1 Body Assembly Inches Prefix
2 Screen Guide Ring 2 0200 12 6 11
FLOW
3 Screen
2 1/2 0250 13 6 1/2 12
4 Gasket
5 Bolting 3 0300 15 10 14
6 Blind Flange 4 0400 18 12 17
7 Drain Assembly 5 0500 22 13 21
B 8 Screen Guide 6 0600 24 16 23
REF.
3
c 8 0800 30 19 29
10 1000 34 23 33
4
12 1200 37 25 36
5
14 1400 42 28 41
SCREEN 6
REMOVAL 16 1600 45 30 44
18 1800 50 35 49
20 2000 53 40 52
24 2400 63 44 62
8
7 Manufacturer reserves the right to modify dimensions,


Fabricated Y Strainers
Type FW600 Class 600 Model FW Strainers
Dimensional Data
A Item Description
Size A B C
1 1 Body Assembly Inches Prefix
2 2 Screen Guide Ring 2 0200 16 14 19
3 Screen 2 1/2 0250 17 15 21
FLOW 4 Gasket
3 0300 19 17 24
5 Screen Guide
6 Blind Flange 4 0400 22 20 28
7 Drain Assembly 5 0500 26 24 34
6 0600 28 26 37
8 0800 34 32 45
B 10 1000 40 34 48
REF. 12 1200 44 36 50
c 3
14 1400 50 38 53
4 16 1600 55 41 58
5 18 1800 60 45 63
6 20 2000 65 50 70
SCREEN
REMOVAL 24 2400 75 55 77
7
Class 900 and Class 1500 also available.

Flanged or Butt Weld

Manufacturer reserves the right to modify dimensions, materials, or
Size Model *Screen design. Contact factory for certification.
0400 - FW600SS - 125
Y Strainer, Stainless Steel, 4", 600# ANSI
Flanges, with 1/8" Perf. Screen

Current Edition
Fabricated Tee Strainers U and UM ASME CODE

STAMP Available
Type TWH150/TWH300
Carbon Steel & TWH150SS/
TWH300SS Stainless Steel
with ANSI Flanges
Construction
The Sure Flow Tee Strainer is a custom fabricated compact
strainer. Designed to remove foreign pipeline particles from
pipelines. This provides the ultimate protection for pumps,
valves, and other related equipment. The Sure Flow Tee
Strainer is fabricated to your specifications.
The standard Sure Flow Tee Strainer is constructed of
carbon or stainless steel material. We have fabricated
numerous assemblies of chrome-moly. Optional materials,
end connections and accessories are available.
Standard Features
Size: 6” - 24” (larger on request)
End Connections: Flanged, butt weld
Body material: Carbon steel, stainless steel
Pressure rating: 150 psig, 300 psig, 600 psig
Closure: Bolted
Basket: 304 Stainless steel
1
Dimensional Data
Size A B C D
D
Inches Prefix TWH 150 TWH 300
Clearance
for Basket 6 0600 18 1/4 19 11 1/4 15 1/2 22
Removal 8 0800 22 22 3/8 14 19 1/4 25
10 1000 25 26 1/4 17 23 1/4 29
C
Cover 12 1200 29 30 1/4 20 26 7/8 31
2 14 1400 32 33 1/4 22 29 3/8 38
Opening
16 1600 34 35 1/2 24 32 3/8 41
18 1800 38 39 1/2 27 36 15/16 46
6 20 2000 41 3/8 42 3/4 30 40 5/8 51
24 2400 46 47 1/4 34 47 1/8 56
Flow 3 *Larger sizes available. Consult factory.
5 4 materials, or design. Contact factory for certification.
Item Description
1 Quick opening Operating Pressures and Temperatures
hinge cover Butt Weld
2 Body assembly
3 Basket B Type Size PSI @ Temp PSI@ Temp
4 Body ring Flanged Steam WOG
5 Screen guide
6 Cross bar A TWH150 6" - 24" 150 366°F 285 100°F
TWH150SS 6" - 24" 150 366°F 275 100°F
TWH300 6" - 24" 300 422°F 740 100°F
TWH300SS 6" - 24" 300 422°F 720 100°F

Current Edition
U and UM ASME CODE
STAMP Available Fabricated Tee Strainers
1 2 Type TW150/TW150SS and
TW300/TW300SS Fabricated
D
3 Tee Type Strainer
4
Clearance 8
for Basket Dimensional Data
Removal Size A B C D
Inches Prefix TW150 TW300 TW150 TW300 TW150 TW300 TW150 TW300
5 2 0200 10 10 1/2 5 5 5 5 1/4 13 13
C 2 1/2 0250 11 1/2 12 6 6 5 3/4 6 13 13
3 0300 12 1/4 13 6 3/4 6 3/4 6 1/8 6 1/2 14 14
Flow 4 0400 14 1/4 15 8 1/4 8 1/4 7 1/8 7 1/2 16 16
5 0500 16 3/4 17 1/2 9 3/4 9 3/4 8 3/8 8 3/4 19 19
6 0600 18 1/4 19 11 1/4 11 1/4 9 1/8 9 1/2 22 22
8 0800 22 22 3/4 14 14 11 11 3/8 25 25
7 6
10 1000 25 26 1/4 17 17 12 1/2 13 1/8 29 29
Butt Weld 12 1200 29 30 1/4 20 20 14 1/2 15 1/8 31 31
B 14 1400 32 33 1/4 22 22 16 16 5/8 38 38
Flanged 16 1600 34 35 1/2 24 24 17 17 3/4 41 41
A 18 1800 38 39 1/2 27 27 19 19 3/4 46 46
20 2000 41 3/8 42 3/4 30 30 20 3/4 21 3/8 51 51
Item Description
24 2400 46 47 1/4 34 34 23 23 5/8 56 56
1
2
Vent Assembly
Bolting
TW150 *Larger sizes available. Consult factory.
3 Gasket
4 Basket
5 Body Assembly materials, or design. Contact factory for certification.
6 Body Ring
7 Screen Guide
8 Cross Bar
TWH150*
Optional Features
• Quick opening cover
• 600, 900 and 1500 lb. pressure ratings
• Variety of basket materials
• Special perf & mesh (min. 5 micron)
• Mounting legs
• Special linings
• Exotic materials ie. Titanium & Zirconium
• Pressure gauge taps
• Drain taps and vents
*"H" denotes hinged cover

Current Edition
Fabricated Tee Strainers U and UM ASME CODE

STAMP Available
D
Clearance for Type TW150/TW150SS
Basket Removal
B C
and TW300/TW300SS
Inlet Fabricated Tee Type
1 Strainer - 90° Angle Flow
Dimensional Data
A Size
A B C D
Inches Prefix
Outlet 2 0200 5 5 3/4 11 22
2 1/2 0250 5 3/4 6 5/8 12 25
3 0300 6 1/8 7 1/8 12 26
4 0400 7 1/8 8 1/8 15 31
5 0500 8 3/8 9 3/8 16 34
2 5 6 0600 9 1/8 10 1/8 18 38
6
4 8 0800 11 12 1/8 22 46
Item Description
3 10 1000 12 1/2 13 3/4 25 53
1 Bolting
2 Gasket 12 1200 14 1/2 15 3/4 29 60
3 Cover 14 1400 16 17 3/8 32 66
4 Body Assembly 16 1600 17 18 3/8 36 72
5 Basket
18 1800 19 20 5/8 38 79
6 Basket Guide
20 2000 20 3/4 22 1/2 40 84
24 2400 23 24 7/8 45 94
Standard Screens
Steam WOG To be specified: sizes available in stainless steel material:
TW150 1 1/2" - 24" 150 366°F 285 100°F Perforated Sheet: 1/32, 3/64, 1/16, 3/32, 1/8, 3/16, 1/4, 1/2
TW150SS 1 1/2" - 24" 150 366°F 275 100°F Mesh Lined: 20, 30, 40, 60, 80, 100, 120, 160,
200 - and down to 5 microns
TW300 1 1/2" - 24" 300 422°F 740 100°F
TW300SS 1 1/2" - 24" 300 422°F 720 100°F Manufacturer reserves the right to modify dimensions,
Inlet
Dimensional Data
or Size A B
Outlet 2
7 Inches Prefix 150 300 150 300
3 4 2 0200 10 10 1/2 5 5 1/4
2 1/2 0250 11 1/2 12 5 3/4 6
B
3 0300 12 1/4 13 6 1/8 6 1/2
Inlet 4 0400 14 1/4 15 7 1/8 7 1/2
or 5 0500 16 3/4 17 1/2 8 3/8 8 3/4
Outlet
6 0600 18 1/4 19 9 1/8 9 1/2
6 8 0800 22 22 3/4 11 11 3/8
1 5 10 1000 25 26 1/4 12 1/2 13 1/8
12 1200 29 30 1/4 14 1/2 15 1/8
A Item Description 14 1400 32 33 1/4 16 16 5/8
1 Inlet Flange
2 Outlet Flange 16 1600 34 35 1/2 17 17 3/4
Special Tee Strainers 3 Hex Nut 18 1800 38 39 1/2 19 19 3/4
4 Studs
5 Gasket 20 2000 41 3/8 42 3/4 20 11/16 21 3/8
6 Basket 24 2400 46 47 1/4 23 23 5/8
7 Cover *Larger sizes available. Consult factory.

Tee Type Strainers
Pressure Drop for Liquids
Correction factor: For liquids more viscous than water or where wire cloth liner is added, multiply
pressure drop in charts by:
Viscosity Perforated Perforated w/Wire Cloth

(SSU) (1/8" Holes) 40 Mesh 60 Mesh 80 Mesh
30 1.00 1.32 1.53 1.62
270 1.30 1.61 1.83 2.00
385 1.44 1.76 2.00 2.20
500 1.58 1.92 2.13 2.41
1,000 1.66 2.22 2.41 2.63
2,000 1.86 2.41 2.72 2.91
(Perforated basket 1/8" dia. holes on 3/16" centers)

10
8
8
e2
7
10
6
Siz
2
3
e1
14
5
16
Siz
4
18
4
20
24
6
30
3
36
Pressure Drop - PSI
42
48
2
1
.9
.8
.7
.6
.5
.4
.3
.2
1
100 200 300 500 1000 2M 3M 5M 10M 20M 30M 50M 100M
Flow Rate of Water — GPM (Clean Basket)

Custom Strainer Screens
Dia. Dia
B Dia C Dia D Dia
Length Length Length
Dia
Cone Type Strainer Cone Type Basket Strainer Cylindrical Screen
Dia
E F Ring
Perf.
Length Length
Perf.
Length
Dia Dia
Basket Strainer Basket Strainer
We manufacture Strainer Baskets, Screens, Tubes, When Ordering Specify:

Cones and Tee Strainers in Stainless Steel, Monel, 1. Pipe size
Titanium and other exotic metals. Sure Flow
Equipment Inc. can customize baskets to fit your 2. Pressure rating/flange rating
special needs. 3. Perforation or mesh size
Please send us your prints, samples or simply give 4. Material
us your requirements/specs in attached chart and
let us design the strainer for you. 5. Style – cone, basket, etc.
Custom product not subject to return credit or 6. Direction of flow – straight or reverse
refund. 7. Percentage of open area or length

Perforated Metal and Mesh
AVAILABLE IN ALL MATERIALS
Mesh - Inch - Micron Conversion Chart

Meshes/Lineal Inch Meshes/Lineal Inch
US and ASTM Actual Opening US and ASTM Actual Opening
Std. Sieve No. Inches Microns Std. Sieve No. Inches Microns
10 .075 1905 130 .0043 109
12 .060 1524 140 .0042 107
14 .051 1295 150 .0041 104
16 .045 1143 160 .0038 97
18 .039 991 170 .0035 89
20 .034 864 180 .0033 84
24 .028 711 200 .0029 74
30 .020 508 250 .0024 61
35 .018 457 300 .0018 46
40 .015 381 400 .0015 38
50 .011 279 120 x 400 .0016 40
60 .009 229 80 x 700 .0012 30
70 .008 203 200 x 600 .0010 25
80 .007 178 165 x 1400 .0007 17
100 .006 152 200 x 1400 .0004 10
120 .0046 117 325 x 2300 .0002 5

Fabricated Sanitary Strainers

Current Edition:
U and UM CODE STAMP
Available
Type BW150SSTRI Sanitary

Basket Strainer
Manufactured from polished Type 316 stainless steel
with Teflon gaskets, Sure Flow Sanitary Basket
Strainers or Y-Strainers are intended for applications
where frequent, thorough cleaning is required
between every batch of product. Sanitary pressure
gauge diaphragm seals are available to determine
change out time if process is continuous.
Dimensional Data
Size
A B C
Inches Prefix
1/2 0050 5 2 1/2 4 1/2
A 3/4 0075 5 2/12 4 1/2
A 1 0100 5 2 1/2 5
2 1
1 1/2 0150 7 3 6
2 0200 8 3 1/2 8
2 1/2 0250 8 4 8
3 0300 9 4 10
B 2 4 0400 10 5 10
6 0600 13 5 12
INLET OUTLET
8 0800 15 7 12
Manufacturer reserves the right
Item Description
3
to modify dimensions, materials,
C 1 Clamp Cover or design. Contact factory for
6 2 Branch Ferrule
certification.
3 Body Ring
4 5
4 Body Ferrule
5 Nameplate
6 Basket Assembly
7
7 Weld Cap
8 8 Drain ferrule
Sanitary Strainer can be supplied with
oversized basket for heavier contaminant
Size Model *Screen
(Prefix) Number Opening loading or to reduce pressure loss with finer
0200 - BW150SSTRI - 005 screens or high viscosity fluids.
Basket Strainer, Stainless Steel, 2” Sanitary Flange
with 100 Mesh Screen

Fabricated Sanitary Strainers
1 2 Type DB150SSTRI
Sanitary Duplex Strainer
Dimensional Data
Size
INLET OUTLET A B
Inches Prefix
1/2 0050 24 4 1/2
Item Description 3/4 0075 25 4 1/2
1 Sanitary Ball Valves 1 0100 27 5
3 2 Sanitary Strainers
4 1 1/2 0150 29 6
3 Inlet Manifold
2 2 0200 32 8
4 Outlet Manifold
5 Tri-clamps 2 1/2 0250 34 8
A
3 0300 38 10
5
B
Type FW150SSTRI Sanitary Y Strainer

Dimensional Data
A Size
1 2 A B
Inches Prefix
1 0100 7 5
INLET OUTLET 1 1/2 0150 8 3/8 6 1/2
2 0200 9 3/4 7
2 1/2 0250 11 8
3 3 0300 11 3/4 9
6 4 0400 14 10 1/2
B 3
6 0600 17 12
5
8 0800 20 14
Item Description *Larger sizes available.
Consult factory.
1 Body Ring
2 Y Branch Manufacturer reserves the right to
4 3 Screen Guide modify dimensions, materials, or
4 Clamp Cover design. Contact factory for certification.
5 Nameplate
6 Screen

Tri Ball Duplex Strainer
Cast Iron, Cast Steel and Cast 316SS, Cast Bronze •
Threaded (T) & Flanged (F) • Sizes 3/4” to 4”
Type D125CIT & D125CIF Cast Iron; D150TCS & D150FCS Cast Steel; D150TSS & D150FSS Cast
316SS; D150TBZ & D150FBZ Cast Bronze
Tri Ball Duplex Strainers remove dirt and debris from pipelines and
protects sensitive system components. The duplex features a design
that makes strainer basket servicing a no-hassle operation. The duplex
keeps the chamber from over flowing during service. This gives you time
to clean or replace the strainer basket without ever having to worry
about leakage and overflow. And … without overflow, there's no need to
clean up after servicing the strainer basket.
A unique flow diverter valve cartridge in the Tri Ball isolates the two
strainer basket chambers and prevents fluid bypass. An easy-to-turn
handle operates the cartridge and diverts the system flow from one
chamber to the other — the flow in the pipeline is never shut off.
When a strainer basket needs to be cleaned, the lever handle is turned
to take it out of service and to divert the flow through the other chamber.
The position of the handle clearly indicates at all times which chamber is
in service.
No special tools are needed to access the strainer basket for cleaning.
The chamber is first drained and then the cover is lifted and swung clear
of the chamber opening. The dynamic diverter cartridge seals prevent
fluid bypass into the out-of-service chamber — making for easy, hassle-
free strainer basket servicing.
Tri Ball Duplex Selection Table

Body and Sizes
Rating Seat/ Diverter
Cartridge Connections
Inches Prefix Seals Balls
Material
Threaded 3/4, 1, 1 1/4 0075, 0100, 0125 125#
(T) 1 1/2, 2, 2 1/2 0150, 0200, 0250 ANSI
Iron
(CI)
Flanged 1, 1 1/2, 2 0100, 0150, 0200 200 PSIG
(F) 2 1/2, 3, 4 0250, 0300, 0400 @ 150°F Teflon/ Stainless
Bronze Buna N* Steel**
(BZ) Threaded 3/4, 1, 1 1/4 0075, 0100, 0125
1 1/2, 2, 2 1/2 0150, 0200, 0250 150#
Carbon (T)
ANSI
Steel
(CS) 200 PSIG
Flanged 1, 1 1/2, 2 0100, 0150, 0200 @ 150°F
Stainless (F) 2 1/2, 3, 4 0250, 0300, 0400
Steel (SS)
*Viton® standard for stainless steel. • For Liquid Service •
5/32" SS perf basket standard for all sizes.
Ordering Information Notes:

or design. Contact
0400 - D125CIF-156 factory for certification.
4" Flgd. duplex strainer, cast iron,
125# ANSI flanges, with 5/32" perf. basket

The heart of the Tri Ball is the unique flow diverter cartridge that fea-
tures a patent pending, highly dynamic sealing system on the diverter
balls that ensures exceptionally long seat life and positive sealing. The
Tri Ball design works so well that there is no need for manual internal or
external ball support adjustments — and the low operating torque means
the strainer can be operated with an easy-turn lever handle. A gear box
is not needed.
A double sealing system on both the upper and lower stems guards
against any possible leakage. Special reinforced polymer seats are used
for extended service life.
Should cartridge service become necessary, it's easy to accomplish. Just
remove four bolts and the cartridge comes right out through the top of
Standard body vent on top of strainer the strainer. There's no need to take the strainer completely apart or to
makes venting quick and easy. remove it from the line.
The compact, low profile Tri Ball fits into spaces ordinary strainers might
not, yet it still uses full-size strainer baskets with a low pressure drop
performance.
And, there's a strainer basket for every application. The standard basket is
made of Type 316 Stainless Steel; however, if required, Monel is
available. Baskets with openings from 3/4" down to 45 microns are
offered: choose the best size for your application — with no compromises.
For easy basket servicing there is a 1/4" drain plug on each strainer
basket chamber. Additionally, there is an easy-to-access vent valve on
top of the strainer body.
Should the diverter valve require service, it Finally, standard foot mounting pads insure a rock solid installation no
slides right out the top of the strainer body. matter where the strainer is installed.
Available options for the Tri Ball include differential pressure gauges,
with or without switches, and magnetic separators installed in the
strainer basket for removing fine ferrous particulate matter from the
process media.
*Gauges are not available for NPT threaded strainers.
Notes:
• Seats are TFE for all materials of construction.
• Iron, bronze and carbon steel have buna seals and o-rings.
• Stainless steel has viton seals and o-rings.
• ONLY the flanged design can be tapped 1/4" NPT at the inlet/outlet
for gauge connections
• ALL strainers have feet for mounting.
• 4" strainer comes standard with a pressure equalizer assembly - not
installed.
• 1/4" NPT cover vent taps are standard.
A minimum of parts, easily replaced,

makes service a snap. Exploded
view shows simplicity of design.

F F
OUT OUT
TURN 180¡
TURN 180¡
TO DIVERT
TO DIVERT
AT AF
FLOW
FLOW
DO NOT OPEN DO NOT OPEN
THIS COVER THIS COVER
INLET INLET
IN
IN
180° 180°
Top View: Threaded Model Top View: Flanged Model
E
BASKET,
CARTRIDGE
REMOVAL
HEIGHT
Front View: Flanged and Threaded Models

Dimensions and weights are for reference only. Contact Sure Flow for certified drawings.
Dimensional Data
Shipping Weight (lbs.)
Size
AF AT C E F Cast Iron Bronze Carbon & SS
Inches Prefix Flanged Threaded Flanged Threaded Flanged Threaded
3/4 0075 – 5 1/2 5 13 3/8 10 1/2 – 45 – 56 – 52
1 0100 6 7/8 5 1/2 5 13 3/8 10 1/2 52 45 65 56 65 52
1-1/4 0125 6 7/8 7 1/2 6 13/16 17 13 1/4 – 90 – 115 – 110
1-1/2 0150 9 3/8 7 1/2 6 13/16 17 13 1/4 109 90 130 115 120 110
2 0200 10 5/8 10 8 3/8 21 3/4 17 3/8 190 180 230 220 210 195
2-1/2 0250 10 3/4 10 8 3/8 21 3/4 17 3/8 210 180 260 220 235 195
3 0300 13 1/2 – 8 7/8 26 1/2 22 3/4 340 – 380 – 460 –
4 0400 16 – 13 1/4 33 24 3/4 430 – 535 – 460 –
1/4" NPT cover vent taps are standard on all strainers.
1/4" NPT basket well drain connectors are standard on all strainer sizes.

Plug Duplex Strainer
Cast Iron, Cast Steel and Cast 316SS, Cast Bronze • Flanged (F) •
Sizes 5", 6", 8"
Type DF125CI Cast Iron; DF150CS Cast Steel; DF150SS Cast 316SS; DF150BZ Cast Bronze
The Plug Type Duplex Strainer is a simple, economical, and trouble free design …
time tested in applications around the world over many years. This type of strainer
is actually a high quality, pressure rated plug valve with integral straining baskets.
Switching the flow from one basket to the other is accomplished by moving the
operating handle through a 90 degree arc. The design is such that is impossible
for this operation to stop the flow because of the unique port design in the diverter
plug. The entire switching operation takes less than 30 seconds. No tools are
needed. The plug is automatically positioned each time in exactly the right spot by
integral stops.
Before operating the handle a manual, integral lifting jack, built into the strainer is
used to lift the diverter plug off of its seat. After the switching operation the lifting
jack is used to reseat the plug. The lifting jack is specially designed to lift and seat
the plug easily, even under high pressures. A built in stop limits the
distance the diverter plug can be raised. This minimizes the possibility
of material bypassing the plug while it is rotated. It also prevents debris
from building up under the plug and making it difficult to reseat.
Other important features of the plug type Duplex Basket Strainer's
include quick opening, swing away yoke design covers. No tools are
required to remove the covers for quick and easy access to the strainer
baskets, and they go back on just as fast as they came off.
Draining of the basket chambers is simplified with the standard NPT drain taps -
and all sizes are provided with mounting legs for bolting the strainer to the floor for
a rock solid installation.
The plug type Duplex Basket Strainer is your best choice for most applications. Its
rugged design and ease of operation have made it the duplex strainer of choice
around the world in hundreds of different industries.
Plug Duplex Selection Table
Body
Connections
Sizes Plug
Seals Rating
Cv Factors*
Material Inches Prefix Material
Size Value
Iron Flanged 5, 6, 8 0500, 0600, 0800 Iron (CI) 5" 300
(CI) 125# or
200 PSIG 6" 420
Bronze Flanged Bronze @ 100°F.
5, 6, 8 0500, 0600, 0800 (BZ)
(BZ) 150# 5" and 6" 8" 900
Buna N
Carbon Bronze sizes * For water with clean
Steel Flanged (BZ) or
150# 6, 8 0600, 0800 Stainless perforated basket
(CS)
Steel (SS) 150 PSIG
@ 100°F.
• For Liquid Service •
Stainless Flanged Stainless 5/32" SS perf basket
Steel 6, 8 0600, 0800 Viton 8" size.
150# Steel (SS) standard for all sizes.
(SS)
Notes:
Size Model *Screen Manufacturer reserves the right to modify
(Prefix) Number Opening dimensions, materials, or design. Contact
0600 - DF125CI-156
6" Flgd. duplex strainer, cast iron, 125# ANSI flanges,
with 5/32" perf. basket

Plug Duplex Strainer
Options
◆ Ductile iron construction ◆ Drain valves
◆ Basket perforations from 1/32" to 1/2" ◆ 1/4" NPT taps
◆ Basket mesh from 20 to 400 ◆ Magnetic basket inserts
◆ Monel baskets ◆ Pressure differential gauge and switch connections
◆ Viton, PTFE, or EPDM seals ◆ Steam jacket
◆ Vent valves
F B
C
A
K DIA
TYP (4)
G
Mounting Layout
J
Top View Flow
Diverter Handle ACME Thread

Plug Lift
Stem O-Ring Handle
Yoke Screw Locking Collar
D Jack Bonnet
O-Ring
Jack Bonnet
Yoke Stud
L
Clearance Cover
For O-Ring Seal
Basket
Removal
Diverter
Plug
E
Strainer
Basket
H Body
NPT
Drain Drain Plug
Front View: Flanged - 5" to 8"

Dimensions and weights are for reference only. Contact Sure Flow for certified drawings.
Dimensional Data
Size Shipping Weight (lbs.)
A B C D E F G H J K L Cast Bronze Carbon Stainless
Inches Prefix Iron Steel Steel
5 0500 18 3/8 9 9 3/4 33 1/4 14 3/4 10 1/4 17 3/16 3/8 19 3/4 9/16 41 463 473 – –
6 0600 22 12 7/8 12 1/2 36 1/4 19 1/2 11 3/4 20 3/4 3/8 19 3/4 5/8 42 575 699 690 738
8 0800 25 14 17 50 5/8 23 1/16 – 30 3/4 1/2 28 15/16 56 1725 2070 1851 1920

Pressure Drop Curves
Pressure Drop vs. Flow Rate
These curves are for clean baskets, without mesh liners - and with WATER flowing through the strainer.
For mesh-lined baskets and/or other fluids, you must first compute a correction factor.
Model D125 and D150 Duplex - 3/4" Through 4"

Flow Rate (Water) M3/hr
3.3 4.5 6.9 11.4 22.7 45.4 68.1 90.9 700 227 454 909 6000 2271
10 69
8 55
6 41
5 34
3/4"
4 28
1"
3 1-1/4" 21
Pressure Drop - kPa

Pressure Drop - PSI
1-1/2"
2 2" 14
2-1/2"
3"
1.0 4"
6.9
0.8
0.6
0.5 3.5
0.4 2.8
0.3 2.0
0.2 1.4
0.1 0.7
10 20 30 40 50 70 100 200 300 400 700 1000 2000 4000 6000 10000
Model DF125 and DF150 Duplex - 5" Through 8"
Flow Rate (Water) M3/hr

3.3 4.5 6.9 11.4 22.7 45.4 68.1 90.9 700 227 454 909 6000 2271
10 69
8 55
6 41
5 34
4 28
3 21
Pressure Drop - kPa
Pressure Drop - PSI
2 14
1.0 6.9
5"
0.8 6"
0.6 8"
0.5 3.5
0.4 2.8
0.3 2.0
0.2 1.4
0.1 0.7
10 20 30 40 50 70 100 200 300 400 700 1000 2000 4000 6000 10000

Automatic Strainers
Current Edition:
U and UM CODE STAMP
Available
The Eliminators
F
The Eliminator, motorized, automatic, self-cleaning
strainer, provides continuous debris removal from fluid
piping systems that demand full time uninterrupted flow.
The Eliminator is particularly effective in fluid applications
where unattended service, high solids loading and/or
uninterrupted flow requirements deem a basket strainer
and its attendant maintenance problems impractical.
Any of the 700 Series Strainers, applied correctly, will
prove efficient and cost effective compared to simplex/
duplex strainers or other automatic straining systems.
Port/straining element interface during

B backwashing cycle.
Sequence of operation
1. Debris laden fluid enters through inlet to
inner chamber. (Fig. 1)
2. Dirty fluid flows upward and outward through
the strainer element (A).
C
3. Debris is retained on the flat face of the
strainer element, while strained fluid continues
to outer chamber and exits through strainer
D outlet. (See inset)
4. During backwash or cleaning cycle, the motor/
F 4 gear reducer (B) is engaged and drives the
A hollow drive shaft (C) and hollow port (D)
3 6 8 around the inner circumference of the strainer
5 element.
5. The backwash assembly (E) is opened to
2 atmospheric pressure by opening the
backwash control valve (not shown).
6. Flow reversal occurs at the port/straining
element (F) interface because of the pressure
G differential described in 5.
7. Debris is effectively vacuumed from the full
E length of the straining element by a vigorous
1 reverse fluid flow and into the hollow port;
down the hollow drive shaft and out the
backwash outlet (G).
8. The hollow port continues to sweep the full
length of the strainer element until the cleaning
cycle has ended.
9. The strainer will provide continuous uninter-
rupted fluid flow during the cleaning operation.
Figure 1 - Cut-away of Eliminator showing fluid flow during 10. The cleaning cycle can be set for continuous
operation or intermittent backwash.

Automatic Self-Cleaning Strainers

Current Edition:
U and UM CODE STAMP
Available
Figure 2 - Wedge Wire Straining Element Cross-Section
Application Straining Element

The Eliminator’s patented unique strainer element The Eliminators feature a revolutionary reverse rolled wedge-
design permits installation in virtually any piping system wire straining element (Fig. 2) that is extremely rugged and
operating at a positive pressure. more clog-resistant than conventional strainer elements
The Eliminators can operate through a wide range of that use perforated plate or wire mesh screens.
operating pressures (5 psig minimum) and solids This proven state-of-the-art straining media is fabricated by
loading with effective debris removal and backwashing wrapping vertical rods with wedge shaped profile wire.
across the entire pressure range. Additionally, only Each intersection of rod and wire is welded to produce an
one drain/backwash connection is required for extremely rugged one-piece element. This forms a
installation, effectively eliminating the expense of a continuous slot that allows only two point contact with
separate backwash pressure connection. debris particles to reduce clogging.
Strainers are used to protect equipment such as The wedge shaped profile wire reduces the possibility of
valves, pumps, meters, heat exchangers or spray retaining debris smaller than the screen opening which
nozzles, as well as in-feed water and process water historically has been the cause of premature clogging or
applications or virtually any similar application. failure of competitive screen designs.
The Eliminator 700 Series Automatic Self-Cleaning
Strainers are fabricated in pipe sizes ranging from 1"
Advantages of Wedge Wire Straining
to 48" to suit most application requirements. Element
• Maximum effective flow area and maximum operating
Proven Features Include: efficiency are maintained throughout service life.
• Patented rugged screen and mechanical assist
backwash mechanism extends useful service life. • Maintenance costs are reduced drastically due to
reduced clogging and stappling of fibrous material.
• Unique clog-resistant straining element reduces
maintenance downtime. • Long-lived straining element provides reduced
operating costs over entire service life.
• All internal replacement parts supplied in corrosion
resistant material. • Rigid element prevents flexing which can cause
premature element failure.
• Efficient new design reduces maintenance
requirements; requires fewer parts. • Efficient, effective debris collection at media/screen
• Low rpm backwash mechanism provides more interface.
efficient cleaning, less wear of internals.

Strainer Element Selection
Figure 3 - Wedge-Wire Straining Elements
Straining Element Selection and subsequently result in longer cleaning durations and
increased backwash fluid loss. Also, smaller than
The 700 Series Straining Element (Fig. 3) is an
necessary screen openings will reduce open screen
extremely rugged, single-piece unit available in a
area and increase pressure loss.
variety of standard and custom openings and
materials. The screen opening should be approximately one-third
(1/3) to one half (1/2) the largest size particle that can
Screen opening should be selected based on the
safely pass downstream. Example: A strainer protecting
amount of protection necessary, and not on the
spray nozzles with a 1/16" orifice would be supplied with
smallest opening available. By specifying a smaller
a 1/32" screen opening.
opening than needed, more debris will be retained
Straining Element Selection Guide

Slot Fraction Mesh Micron % Slot Fraction Mesh Micron %
Opening Equivalent Equivalent Equivalent Open Opening Equivalent Equivalent Equivalent Open
(inches) inches (mm.) Area (inches) inches (mm.) Area
Standard Custom
0.003 - (0.08) 200 75 9
0.015 1/64 (0.4) 40 385 24
0.006 - (0.15) 100 149 16.5
0.031* 1/32 (0.8) 20 795 40 0.010 - (0.25) 50 250 17.5
0.062* 1/16 (1.6) 10 1590 51 0.020 - (0.5) 35 500 30
0.040 - (1.0) 18 1000 46
0.125* 1/8 (3.2) 6 3205 67
0.156 5/32 (4.0) 5 4000 69
0.187 3/16 (4.8) 4 4795 72 0.250 1/4 (6.4) 3 6410 78
* Available from stock

Standard screen material is 304 Stainless Steel.
316 Stainless Steel, 316L Stainless Steel, Monel and other materials are available upon request.

The Hyper-Jet® Advantage

Current Edition:
U and UM CODE STAMP
Available
The Hyper-Jet™
The Hyper-Jet™ is the line of motorized, automatic self-cleaning strainers.
It is very effective in system applications where operating pressure is low
(under 5 psig) or where the debris is difficult to remove. The 721 Series
strainer provides unattended service with the addition of external backwash
to enhance the self-cleaning attribute over other automatic strainers.
Application:
The Hyper-Jet™’s unique patented backwash system permits installation
in a broader range of applications. This range includes from relatively low
pressure to very high pressure and from coarse, easily removed debris
to fine, sticky debris.
In a low pressure mode (such as on the suction side of a pumping system),
the Hyper-Jet™ system is mounted on the leading edge of the strainer
backwash arm. External fluid is directed at an incident angle over the
inside surface of the straining element through the high pressure nozzle
assembly. The high velocity of this spray assists the cleaning of the
straining element. External source backwash pressure must be a
minimum of 30 psi over operating pressure.
Hyper-Jet™ strainers are used to protect equipment such as pumps,
motors, heat exchangers or spray nozzles, as well as process applications
such as cooling towers or virtually any similar application.
Figure 2 - The innovative internals of the Hyper-
The Series 721 Hyper-Jet™ Self-Cleaning Strainers are fabricated in Jet™ showing ease of maintenance.
pipe sizes ranging from 1" to 36" to suit most applications’ requirements.
B
The Hyper-Jet™ System can also easily and economically be field installed in any A
Fluid Engineering Self-Cleaning Strainer (6" size and larger) in service as a retro-
fit installation.
The Unique Hyper-Jet™ Advantage

The external source of backwash fluid is introduced by opening the control valve
(not shown) connecting the spray nozzles (A) at the leading edge (B) of the
backwash assembly.
A “Jet” spray action occurs at the straining element inside surface (see insert) in
addition to the flow reversal at the port/straining element interface.
C
Debris is effectively removed from the full-length of the straining element by a
vigorous “Hyper-Jet” fluid flow into the hollow port; down the hollow drive shaft and
out the backwash outlet.
Cross-Sectional View of Port/Straining
Element During Backwash Cycle
Series 721 Self-Cleaning Strainer

Typical Backwash Flow Requirement
Strainer Size 1”, 1-1/2” 4” 6” 8” 10/12” 14/16” 18/20” 24” 30” 36”
2” or 3”
Backwash Line Size 1-1/2”` 1-1/2” 1-1/2” 1-1/2” 2” 3” 3” 4” 4” 6”
Backwash Flow in GPM 8-12 15-20 30-40 60-75 110-150 170-210 250-310 400-490 550-700 750-900
(Gal. Per Minute)
External Backwash Source GPM 3-5 3-5 5-10 10-15 15-25 25-35 35-45 55-65 80-90 115-130
External Line Size 3/4” 3/4” 3/4” 1” 1” 1” 1-1/4” 1-1/2” 1-1/2” 2”

Specifications - Dimensions/ Weight Current Edition:

U and UM CODE STAMP
Available
793 Series 1/2" Dia. Mounting Hole

(4 Req'd) on a Dia. BC
D
1" -10" Distance
Req'd for
Screen
Removal
OUTLET INLET
1 " NPT
4
E
B SIZE VENT
VALVE
A
G
Drain
C
SIZE F Back-
6"
wash
Port
Model Size A B C D E F G H Approx. Wts. Lbs. Motor

No. (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) Dry Wet Cov. H.P.
010-793 1-150 16-1/2 14-1/4 10 53 30-1/2 1 NPT 1 NPT 11-1/4 320 466 142 1
/4
1 1 1 1 1 1
015-793 1 /2 -150 16- /2 14- /4 10 53 30- /2 1 NPT 1 NPT 11- /4 323 469 142 /4
020-793 2-150 16-1/2 14-1/4 10 53 30-1/2 1 NPT 1 NPT 11-1/4 327 473 142 1
/4
025-793 21/2-150 16-1/2 14-1/4 10 53 30-1/2 1 NPT 1 NPT 11-1/4 336 482 142 1
/4
1 1 1 1 1
030-793 3-150 16- /2 14- /4 10 53 30- /2 1 NPT 1 NPT 11- /4 338 484 142 /4
040-793 4-150 16-1/2 14-1/4 10 53 30-1/2 1 NPT 1 NPT 11-1/4 348 494 142 1
/4
060-793 6-150 20 15-5/8 11 58-5/8 32 1-1/2 NPT 1 NPT 15-1/2 511 700 176 1
/4
1 3 1
080-793 8-150 28 18 16 74 41 1- /2 NPT 1 NPT 20- /4 797 1030 200 /4
100-793 10-150 28 18 16 74 41 1-1/2 NPT 1 NPT 20-3/4 830 1060 200 1
/4
THREADED (NPT) INLET/OUTLET CONNECTIONS AVAILABLE
723 Series 10" -20"

VENT
J
E
Distance
Req'd for SIZE
Screen F
Removal
G Size
Backwash
OUTLET INLET B Connection
45°
A
C D
H 7"
NPT 8 Dia. I
Drain / Blowoff Dia. B.C.
Model Size A B C D E F G H I J Approx. Wts. Lbs. Motor

No. (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) Dry Wet Cov. H.P.
100-723 10-150 36 43 171/2 141/2 75 581/2 2 NPT 11/2 NPT 26 143/4 1450 2100 290 1
/4
120-723 12-150 36 43 171/2 141/2 75 581/2 2 NPT 11/2 NPT 26 143/4 1520 2175 290 1
/4
1 1 1 1 3 1
140-723 14-150 44 51 /2 19 /2 15 /2 94 69 3-150 1 /2 NPT 32 21 /4 2375 3650 460 /4
160-723 16-150 44 511/2 191/2 151/2 94 69 3-150 11/2 NPT 32 213/4 2450 3725 460 1
/4
180-723 18-150 48 66 24 21 113 87 3-150 2 NPT 38 25 1/4 3290 5535 580 1
/4
1 1
200-723 20-150 48 66 24 21 113 87 3-150 2 NPT 38 25 /4 3375 5625 580 /4
DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE. APPLY FOR CERTIFIED DRAWINGS

Current Edition:
U and UM CODE STAMP
Available
Specifications - Dimensions/ Weight
723 Series 24" -36" VENT
E
Distance
Req'd for SIZE
Screen F
Removal
G Size
Backwash
OUTLET INLET B Connection 45°
A
C
D
H NPT 11"
8
Dia. I
Drain / Blowoff Mounting Dia. B.C.
Holes
Model Size A B C D E F G H I J Approx. Wts. Lbs. Motor
No. (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) (In.) Dry Wet Cov. H.P.
1
240-723 24-150 56 77 33 28 122 98 4-150 2 NPT 44 28 4,375 8,350 610 /3
1
300-723 30-150 66 94 39 34 150 115 4-150 2 NPT 54 33 6,525 13,625 1,125 /3
1
360-723 36-150 86 158-5/8 47-5/8 40-5/8 210 130 6-150 2 NPT 72 43 12,050 26,975 1,490 /2
LARGER SIZES AVAILABLE UPON REQUEST
DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE. APPLY FOR CERTIFIED DRAWINGS
Specifications - Pressure Drop Charts

100,000
721-723 Series
90,000
80,000
70,000
60,000
50,000
48"
793 Series
4,000
40,000
42"
3,000
30,000 36"
30" 10"
20,000 2,000
24" 8"
10,000 20"
9,000 6"
8,000 18" 1,000
7,000 900
6,000 16" 800
Water Flow GPM
5,000 700
4,000
14"
600 4"
12"
500
3,000
10" 400
Water Flow GPM
2,000 3"
300
"
2.5
1,000 200
900
800
700 2"
600
500
100
400 90
80
300
70
60
200 50
40
100 30
.2 .3 .4 .5 .6 .7 .8 .9 1 2 3 4 5 6 7 8 910 .1 .2 .3 .4 .5 .6 .7 .8 .9 1 2 3 4 5 6 7 8 9 10
Pressure Drop PSI 10"- 48" Pressure Drop PSI 2"-10"

with 1/32" or larger screen opening with 1/32" or larger screen opening

Specifications and Options
Typical Strainer Specifications
The strainer shall be Series 723/793 Self-Cleaning,
motorized type. (Fig. 4)
The body and cover shall be fabricated (carbon steel),
designed, manufactured and tested generally to ASME Section
VIII Standards, using qualified ASME Section IX welders.
Housing to be suitable for a design pressure of (150) psig.
Inlet and outlet connections shall be flanged and conform
to ANSI B16.5 standards. The strainer shall have a single
backwash connection and large drain connections located
in vessel bottom. Unit to be complete with factory supplied
steel support legs for bolting to concrete or steel base.
Strainer shall be __________ size capable of handling
_________________ gpm of fluid at a _________ p s i g
pressure loss with clean straining elements.
The straining element will be manufactured from corrosion
resistant (304 Stainless Steel) reverse rolled slotted wedge
wire screen designed with ___________ inch openings.
The wide or flat cross section of the wedge wire shall face
the direction of flow providing for a continuous smooth flat
surface to trap debris. The straining media shall be free of Fig. 4
pockets, tubes, collector bars, etc. that accumulate and
trap debris permanently. Strainer Options Available
All internal parts will be of corrosion resistant (304 Stainless Cover Lift Recommended for remote locations.
Steel). The strainer shall be provided with drive shaft and Assemblies -
hollow port assembly fitted with all necessary bearings and
seals. ASME - ASME Section VIII and Code stamped.
The drive arm and hollow port assembly will be free running
Materials of Consult factory for stainless steel, copper,
at a maximum speed of two (2) rpm and not contact with
Construction - nickel, monel, or other requirements.
screen surface. Port assembly shall be factory and field
adjustable for positive effective cleaning and shear Control Control Panel with Nema 4 Enclosure,
capability. Note: Sizes 1" thru 20" have (1) backwash Package - Backwash Valve with Electric Operator,
hollow port. Sizes 24" and up will have (2) backwash Single Element Differential Pressure Switch.
hollow ports.
Drive shaft will be supported at the top with roller bearings Design - High Pressure applications - Consult factory.
located in a double reduction gear reducer and at the
bottom with a water lubricated guide bearing. Hyper-Jet - Low Pressure and Special Application.
The gear reducer shall be driven by a ____________hp, Skid All equipment desired, including strainers,
___________ v, __________ Ph, 50/60 Hz, TEFC motor. Packages - valves, controls, wiring, piping and skids may
Manual Throttling Valve be combined as a complete, custom package.
Backwash Size of the project has no limitation.
Control Outlet
Valve to Water
Source Water Saver The Water Saver Package (Fig. 5) can be
Centrifugal
Separator Package - used on most applications where the strained
Pre-set Automatic liquid is scarce or valuable. The strainer
Drain Valve w/Timer
backwash fluid is directed to a centrifugal
Drain separator where only a fraction of the strainer
Drain Valve backwash is discharged to waste. The
separator backwash can be manually
Drain/Blowoff Strainer operated and/or automated with a pre-set
timer controlled valve.
Fig. 5 - Series 723 - Water Saver Package

Sequence Controller
installation and the conditions experienced. The adjustable cycle

Design and Construction timer can be programmed from 15 minutes to a 10-hour cycle (off)
The Sequence Controller is designed with the Customers’ and for 1 to 10 minutes duration (on). Adjustments can be made
specific requirements in mind. The Sequence Controller provides as conditions warrant them.
an automatic, effective backwashing cycle with a minimum loss
of water. Continuous Operation
The Sequence Controllers are constructed with state-of-the- The selector switch is adjusted to “Manual” thus permitting the
art industrial type components which permits replacing individual continuous mode. In the continuous mode, the Automatic Self-
components without having to replace an entire circuit board. Cleaning Strainer will be backwashing continuously with the
The industrial type components are more durable and reliable backwash valve open and the drive motor running. This mode of
and adjustments can be made with ease. operation may be necessary if the installation experiences high
solid loadings.
Standard Features In either Mode of Operation, the backwash assembly is
• Enclosure - Nema 4 specifically designed to rotate at 2 RPM to allow for effective
• Adjustable Cycle Timer backwashing in less time, thus decreasing the amount of backwash
• Off-delay Timer water lost.
• Motor Starters with Auxiliary contact and overload relay
• Selector Switch Standard Control Package
• Indicating Lights The Sequence Controller Control Package consists of:
• Fuses • Control Panel with Nema 4 Enclosure
• Terminal Block • Backwash Valve with Electric Operator
• Single Element Differential Pressure Switch
Modes of Operation
There are basically two modes of operation - intermittent and Options
continuous. By turning the selector switch, the mode of operation • 230V, 380V, 460V, 575V
can be selected. • 50 or 60 hertz
• Dual Element Differential Pressure Switch
Automatic Intermittent Position • Nema 4X (Fiberglass or Stainless Steel), Nema 7 or 9
With the selector in the “Auto” position, the drive motor will start (Explosion Proof), Nema 12, Nema 3 Enclosures
and the backwash valve opens as determined by the adjustable • Circuit Breakers, Disconnect Switch, Transformer
cycle timer or by the differential pressure switch. • Reset Buttons
The differential pressure switch is normally factory set at 1 - 1- • Alarms
1/2 psig over the anticipated clean pressure drop. Should a high • PLC Interface and/or Pump Interlock
differential pressure occur during the timed off period, the • Extra Contact and Relays
differential pressure switch will override the cycle timer and start • Backwash valve can be supplied with Pneumatic Operator
or continue the backwash until the differential pressure is satisfied. • Backwash Valve available in numerous materials
After the differential pressure has been satisfied, the strainer will • Differential Pressure Switches available with Mercury, Snap
continue to backwash for an additional 60 seconds (time delay Action, Diaphragm or piston contacts.
relay).
The Automatic Self-Cleaning Strainer would start a backwash
Codes/Standards
cycle based on the timed sequence selected on the adjustable The Sequence Controller can be manufactured to UL Listings,
cycle timer. The timed sequence should be determined by each CSA Approval, JIC, NEMA Standards.

Sure Flow Equipment Inc. – Limited Warranty
All products are warranted to be free of defects in material and workmanship for a period of one year from the date of shipment, subject
to below. All custom products are not subject to return, credit or refund.
If the purchaser believes a product to be defective, the purchaser shall:
(a) Notify the manufacturer within ten(10) days after receipt of merchandise, state the alleged defect and request permission to
return the product. Merchandise will not be accepted for return without a “Return Code” clearly marked on the outside of the package.
Contact the office to obtain a return code. Merchandise will not be accepted for return or credit later than six (6) months after
invoicing.
(b) If permission is given, return the product with the transportation prepaid. Collect shipments will not be accepted. Goods must be
returned prepaid.
If a shipment is received in a damaged or deficient condition, a claim must be filed with the delivering carrier and noted on the freight bill
before you accept the merchandise. All other claims must be made in writing and received by Sure Flow Equipment Inc. within ten (10)
days after receipt of merchandise.
If the product is accepted for return and found to be defective, the manufacturer will, at its discretion, either repair or replace the product,
F.O.B. factory, within 60 days of receipt, or issue credit for the purchase price.
Sure Flow Equipment Inc. shall not be liable for failure to deliver or delays in delivering occasioned by acts of God, war, labor difficulties,
inability to obtain materials or any other causes whatsoever beyond our control.
Other than to repair, replace or credit as described above, purchaser agrees that manufacturer shall not be liable for any loss, costs,
expenses, or damages of any kind arising out of the product, its use, installation or replacements, labeling, instructions, information or
technical data of any kind, description of product use, sample or model, warnings or lack of any of the foregoing.
NO OTHER WARRANTIES, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF FITNESS FOR A
PARTICULAR PURPOSE AND MERCHANTABILITY, ARE MADE OR AUTHORIZED. NO AFFIRMATION OF ACT, PROMISE, DESCRIP-
TION OF PRODUCT OR USE OR SAMPLE OR MODEL SHALL CREATE ANY WARRANTY FROM MANUFACTURER, UNLESS SIGNED
BY THE PRESIDENT OF MANUFACTURER.
CANCELLATIONS: Cancelled orders will be subject to a charge of at least 35%.
Cancelled custom orders will be subject to a charge of 100% of quoted price.
MINIMUM BILLING: $50.00 NET
SPECIAL DOCUMENTATION: A charge will apply for non-standard, special documentation requests such as
Material Test Reports (MTR’s) and Certificates of Conformance (COC’s).
Catalogs Available from Sure Flow Equipment


Strainer Superflow

Uploaded by

Copyright:

Available Formats

Strainer Superflow

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Strainer Superflow

Uploaded by

Copyright:

Available Formats

Strainer Applications

Pulp and Paper

If it flows, a strainer should be there!

Fluid to be strained Flow rate in GPM,

The Universe of Industrial Valves from Sure Flow

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Flow Rate vs Pressure Drop

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Operating Pressures and Temperatures

Ordering Information Notes

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Type T250J Cast Iron

Operating Pressures and Temperatures Standard Screens

Flow 1/4 0025 3 3/16 2 1/16 3/8 4

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Ordering Information Notes

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Operating Pressures and Cast Steel - Body, cover, plug - ASTM-A487-4N

Ordering Information Notes

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Type YFC125 & YFC250 Cast Iron with ANSI Flanges

Note: On sizes 4” and below, drain is centered.

Ordering Information Notes

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Operating Pressures and Temperatures Standard Screens

Ordering Information Notes

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Operating Pressures and Temperatures Standard Screens

Ordering Information Notes

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Ordering Information Notes

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Ordering Information Notes

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Ordering Information Notes

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Type YBC2500 Forged Steel & Stainless Steel High

No Name Material Qty

Ordering Information Notes

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Operating Pressures and Temperatures Dimensional Data

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

A. Pressure gauges to indicate clogged screen

Pressure Drop psi

LIQUID FLOW (WATER) GPM .1

LIQUID FLOW (WATER) GPM

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

BTC125 Cast Iron, Swivel Clamp Cover

3/8 0038 5 1/4 3 9/16 5 7/16 6 3/8 7 1/2 18

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Cast Simplex Strainers Current Edition:

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Ordering Information Notes

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164

Basket Strainers Current Edition:

Operating Pressures and Temperatures

Ordering Information Notes

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164