0% found this document useful (0 votes)
70 views3 pages

Cellconnalgoswitch1: Mo Parameter Id Parameter Name Ne MML Command

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
70 views3 pages

Cellconnalgoswitch1: Mo Parameter Id Parameter Name Ne MML Command

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

9/28/2020 CellConnAlgoSwitch1

CellConnAlgoSwitch1

MO UCELLCONNALGOPARA

Parameter ID CellConnAlgoSwitch1

Parameter Name SW 1 for Cell-level Conn-oriented Algorithm

NE BSC6900

MML Command ADD UCELLCONNALGOPARA


MOD UCELLCONNALGOPARA

Meaning Switch controlling certain cell-level connection-oriented algorithms.


1. RB_PARKING_SWITCH: When this switch is turned on, the RB Parking feature is
available. This feature works as follows: When a UE fails to set up a single PS BE
service from the idle mode or fails to perform a CELL_FACH-to-CELL_DCH (F2D)
state transition for a single PS BE service, this feature: 1) Transits the UE to the RB
Parking state (a special state of the CELL_FACH state) to prevent the UE from
repeatedly making RRC connection setup attempts. In this way, this feature reduces
the UE's signaling resource consumption. 2) Prohibits the UE from reporting event 4A
within a period of time specified by the "ParkingF2DHTvmPTAT" parameter in the "SET
UUESTATETRANS" command. In this way, this feature reduces the data transmission
probability and user-plane resource consumption for the UE. 3) Prohibits the UE from
transmitting any data within a period of time specified by the "ParkingF2DHTvmTxIAT"
parameter in the "SET UUESTATETRANS" command. In this way, this feature reduces
the data transmission probability and user-plane resource consumption for the UE.
When this switch is turned off, the RB Parking feature is unavailable. Refer to 3GPP
TS 25.331 for details about the "pending time after trigger" IE (corresponding to the
"ParkingF2DHTvmPTAT" parameter) and the "Tx interruption after trigger" IE
(corresponding to the "ParkingF2DHTvmTxIAT" parameter).
2. PERFENH_SYSHO_IN_FAIL_RETRY_SWITCH: Whether a UE processing only PS
services is allowed to perform a channel fallback or rate reduction to attempt another
incoming inter-RAT handover after the UE fails to perform an incoming inter-RAT
handover procedure.When this switch is set to on, a UE processing only PS services is
allowed to perform a channel fallback or rate reduction to attempt another incoming
inter-RAT handover after the UE fails to perform an incoming inter-RAT handover
procedure.When this switch is set to off, a UE processing only PS services is not
allowed to perform a channel fallback or rate reduction to attempt another incoming
inter-RAT handover after the UE fails to perform an incoming inter-RAT handover
procedure.
3. PREEMPTED_PS_BE_DO_PARKING_SWITCH: Whether the RNC switches
preempted UEs that process only PS BE services to the RB Parking state. When this
switch and the RB_PARKING_SWITCH under the "CellConnAlgoSwitch1" parameter
and the "PreemptAlgoSwitch" parameter in the "SET UQUEUEPREEMPT" command
are all set to on, the RNC switches preempted UEs that process only PS BE services
to the RB Parking state. When this switch is set to off, the RNC applies the original
processing mechanism to preempted UEs that process only PS BE services; for
example, the RNC directly releases the RRC connections of these UEs. The RB
Parking feature works as follows: The RNC switches a UE to the CELL_FACH state
and stops user-plane data transmission for the UE. For details about RB Parking, see
the meaning of the RB_PARKING_SWITCH under the "CellConnAlgoSwitch1"
parameter.

IsKey NO

Mandatory NO

Feature ID WRFD-010202
WRFD-020605
WRFD-160206

127.0.0.1:7890/pages/GED0305H/11/GED0305H/11/resources/EN/UMTS/BSC6900/MML/mbsc/m-para/ucellconnalgopara_cellconnalgoswitch1.html 1/3
9/28/2020 CellConnAlgoSwitch1
Feature Name UE State in Connected Mode (CELL-DCH, CELL-PCH, URA-PCH, CELL-FACH)
SRNS Relocation Introduction Package
RB Parking

Value Type Bit Field Type

GUI Value Range RB_PARKING_SWITCH, PERFENH_SYSHO_IN_FAIL_RETRY_SWITCH,


PREEMPTED_PS_BE_DO_PARKING_SWITCH

Enumeration RB_PARKING_SWITCH~0, PERFENH_SYSHO_IN_FAIL_RETRY_SWITCH~4,


Number/Bit PREEMPTED_PS_BE_DO_PARKING_SWITCH~8

Unit None

Actual Value Range RB_PARKING_SWITCH, PERFENH_SYSHO_IN_FAIL_RETRY_SWITCH,


PREEMPTED_PS_BE_DO_PARKING_SWITCH

Default Value RB_PARKING_SWITCH:0,PERFENH_SYSHO_IN_FAIL_RETRY_SWITCH:0,


PREEMPTED_PS_BE_DO_PARKING_SWITCH:0

Recommended Value RB_PARKING_SWITCH:OFF, PERFENH_SYSHO_IN_FAIL_RETRY_SWITCH:OFF,


PREEMPTED_PS_BE_DO_PARKING_SWITCH:OFF

Initial Value Source Default/Recommended Value

Impact Cell

Parameter -Others:
Relationship PREEMPTED_PS_BE_DO_PARKING_SWITCH: This switch takes effect only when
the [UQUEUEPREEMPT:PreemptAlgoSwitch] and the RB_PARKING_SWITCH under
the [UCELLCONNALGOPARA:CellConnAlgoSwitch1] are both set to on.

Access Read & Write

Service Interrupted No (And no impact on the UE in idle mode)


After Modification

Interruption Scope N/A

Interruption N/A
Duration(Min)

Caution None

Validation of The parameter modification has no impact on the equipment.


Modification

Impact on Radio 1. RB_PARKING_SWITCH: When a cell enters the heavy congestion state, turning on
Network Performance this switch reduces the number of retaliatory RRC connection setup attempts made by
UEs that have failed to set up a single PS BE service. This ensures system stability
and expands Uu-interface capacity.
2. PERFENH_SYSHO_IN_FAIL_RETRY_SWITCH:When this switch is set to on, the
success rate of incoming inter-RAT handovers and the number of UMTS UEs increase.
3. PREEMPTED_PS_BE_DO_PARKING_SWITCH: When this switch is set to on, the
RNC does not directly release the RRC connections of preempted UEs that process
only PS BE services. Instead, the RNC switches the UEs to the CELL_FACH state
through RB Parking. In this way, the number of abnormal call drops for preempted PS
BE UEs in a cell decreases. That is, the PS call drop rate in a cell decreases.

Introduced in Version BSC6900 V900R015C00

Attribute Radio

127.0.0.1:7890/pages/GED0305H/11/GED0305H/11/resources/EN/UMTS/BSC6900/MML/mbsc/m-para/ucellconnalgopara_cellconnalgoswitch1.html 2/3
9/28/2020 CellConnAlgoSwitch1

Huawei Proprietary and Confidential


Copyright © Huawei Technologies Co., Ltd.

127.0.0.1:7890/pages/GED0305H/11/GED0305H/11/resources/EN/UMTS/BSC6900/MML/mbsc/m-para/ucellconnalgopara_cellconnalgoswitch1.html 3/3

You might also like