0% found this document useful (0 votes)
79 views2 pages

Spriority: Add Ucellselresel Mod Ucellselresel

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
79 views2 pages

Spriority: Add Ucellselresel Mod Ucellselresel

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

9/28/2020 SPriority

SPriority

MO UCELLSELRESEL

Parameter ID SPriority

Parameter Name Absolute priority level of the serving cell

NE BSC6900

MML Command ADD UCELLSELRESEL


MOD UCELLSELRESEL

Meaning Absolute priority level of the serving cell when a UE performs cell reselection.
The UE compares the absolute priority level of the serving cell with that of neighboring
frequencies, and specifies the target frequency based on the comparison result. That
is,
when the priority level of the serving cell is smaller than that of the neighboring
frequency, the UE measures the neighboring frequency. If the signal of cells on the
neighboring frequency satisfies relevant requirements, the UE initiates the cell
reselection.
When the priority level of the serving cell is larger than that of the neighboring
frequency, the UE measures the neighboring frequency only when the signal of the
serving cell is weak. If the signal of cells on the neighboring frequency satisfies
relevant requirements, the UE initiates the cell reselection.
The value of this parameter is set during network planning.
For details about this parameter, see 3GPP TS 25.304.

IsKey NO

Mandatory NO

Feature ID WRFD-010801
WRFD-140226
WRFD-020126

Feature Name Intra RNC Cell Update


Fast Return from UMTS to LTE
Mobility Between UMTS and LTE Phase 1

Value Type Interval Type

GUI Value Range 0~7

Enumeration N/A
Number/Bit

Unit None

Actual Value Range 0~7

Default Value 4

Recommended Value 4

Initial Value Source Radio Planning (Internal planning)

Impact Cell

Parameter -Configuration constraints:


Relationship When adding or modifying a [UCELLSELRESEL], [UCELLSELRESEL] and the
corresponding [UCELLNFREQPRIOINFO] must meet the following condition:
127.0.0.1:7890/pages/GED0305H/11/GED0305H/11/resources/EN/UMTS/BSC6900/MML/mbsc/m-para/ucellselresel_spriority.html 1/2
9/28/2020 SPriority
[UCELLNFREQPRIOINFO:NPriority] and [UCELLSELRESEL:SPriority] cannot have
the same value.

Access Read & Write

Service Interrupted No (Impact on the UE in idle mode)


After Modification

Interruption Scope N/A

Interruption N/A
Duration(Min)

Caution None

Validation of The parameter modification has no impact on the equipment.


Modification

Impact on Radio The larger the value of this parameter, the harder the UE performs cell reselection, the
Network Performance smaller the absolute priority level of the serving cell is, the easier the UE performs cell
reselection.

Introduced in Version BSC6900 V900R011

Attribute Radio

Huawei Proprietary and Confidential


Copyright © Huawei Technologies Co., Ltd.

127.0.0.1:7890/pages/GED0305H/11/GED0305H/11/resources/EN/UMTS/BSC6900/MML/mbsc/m-para/ucellselresel_spriority.html 2/2

You might also like