Scribd
Upload
55 views4 pages

Material Composition of The Forms (I.e. G.I., Aluminum, PVC, Etc)

The document describes the PLASTECH modular prefabricated formwork system made of plastic injection molded panels. It lists the standard panel sizes and accessories that make up the system. The key points are: 1. The plastic panels can be reused over 200 times and are more durable than metal or wood forms during construction. 2. The system is compatible with other structural formwork materials and can be used to form concrete structures of various sizes and complexities. 3. Maintenance is minimal as the plastic does not require cleaning like metal forms and is less prone to theft.

Uploaded by

Judy Ann Castor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views4 pages

Material Composition of The Forms (I.e. G.I., Aluminum, PVC, Etc)

The document describes the PLASTECH modular prefabricated formwork system made of plastic injection molded panels. It lists the standard panel sizes and accessories that make up the system. The key points are: 1. The plastic panels can be reused over 200 times and are more durable than metal or wood forms during construction. 2. The system is compatible with other structural formwork materials and can be used to form concrete structures of various sizes and complexities. 3. Maintenance is minimal as the plastic does not require cleaning like metal forms and is less prone to theft.

Uploaded by

Judy Ann Castor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Type Of Construction Technology

CAST IN PLACE
Proposed

PLASTECH System is an innovative prefabricated modular formwork system that is made of wall panel from composite
plastic material and manufactured using Plastic Injection Molding Machines. Its part is composed of Equipment consist of
the following parts:

1. 600 x 1200 Plastech Panel;


2. 300 x 1200 Plastech Panel;
3. 100 X 1200 Plastech Filler Panel;
4. 1200 Internal Corner Steel Panel;
5. 1200 External Corner Steel Angle
Panel;
6. Splice Steel Plate;
7. Panel Steel Connecting Pin;
8. Alloy Whaler 1000;
1 9.
10.
Alloy Whaler 900;
Threaded Steel Rod 600;
11. Whaler Nut;
12. Whaler External Corner Clamp;
13. Prop Bracket Pin;
Material composition of the forms
14. Prop Bracket;
(i.e. G.I., Aluminum, PVC, etc); 15. Prop Floor Bracket;
16. Telescopic Props (Small);
17. Telescopic Props (Large);
18. Walkway Bracket;
19. Cone;
20. Conduit 200 mm;
21. Tie Hole Plug.
Type Of Construction Technology
CAST IN PLACE
Proposed

2 PLASTECH has an impact resistance face sheet that make panel rugged for typical construction site handling.
The panel can be reused over 200 times under proper care and maintenance unlike the metal & conventional formwork
Ideal number of usage; where face sheets are easily dented through impact & has limited reusability.

Minimum shoring distance in


meters (if any);
Type Of Construction Technology
CAST IN PLACE
Proposed

4
Yes, definitely compatible with all types of structural formworks materials.
Compatibility with Metal forms;

Available standard panel sizes;


Type Of Construction Technology
CAST IN PLACE
Proposed

6
See above standard panels. Item 5
Average weight per sq.m.;

PLASTECH system can be used to form any concrete structures; single or multiple directions walls, floor slabs, retaining
7 walls, columns, beams, treatment plants, bridges, precast components, water reservoirs, etc. It comes with various
modular sizes in width and height together with a complete range of accessories to meet your building needs. Our
system is designed to meet your architectural requirement on:
If can be used in the construction • Single, double or multiple storey commercial or residential building.
of a 2-storey 60-80 sq.m. housing • Low cost houses/ apartment to high-end bungalow/condominium.
• Government quarters.
unit; • Schools, colleges, hospitals or universities.
• Infrastructure like bridges, power plants, dams, culverts etc.

8 We quote price based on the actual estimate of formwork materials after getting detailed plans and drawings from
the client. Please send us detailed plans of every model.
Cost per sq.m.;

PLASTECH is easy to maintain as it is non-stick to concrete unlike other metal & timber plywood formwork systems
9 that require massive cleaning on the form face for every cycle. PLASTECH also has less security problem compare to
other metal systems which are often stolen from site for its attractive scrap value.
Maintenance needed for the
forms;

10
(6) Six Months warranty with free technical support services on site.

Warranty or after-sales services (if


any);

You might also like