This document outlines the budget of work for the Araling Panlipunan learning area of Kasaysayan ng Daigdig for the first grading period. It details 3 lessons that will be taught over the course of 12, 10, and 8 hours respectively. Lesson 1 will cover preparing and using hand tools as well as maintaining them. Lesson 2 focuses on selecting components to measure, carrying out measurements, and doing calculations. Lesson 3 identifies different technical drawings and how to interpret them. A fourth lesson covering identifying, evaluating, and controlling hazards and risks is also scheduled for 10 hours. The document was prepared by Patricia Marie N. Pasar Doza.
This document outlines the budget of work for the Araling Panlipunan learning area of Kasaysayan ng Daigdig for the first grading period. It details 3 lessons that will be taught over the course of 12, 10, and 8 hours respectively. Lesson 1 will cover preparing and using hand tools as well as maintaining them. Lesson 2 focuses on selecting components to measure, carrying out measurements, and doing calculations. Lesson 3 identifies different technical drawings and how to interpret them. A fourth lesson covering identifying, evaluating, and controlling hazards and risks is also scheduled for 10 hours. The document was prepared by Patricia Marie N. Pasar Doza.
This document outlines the budget of work for the Araling Panlipunan learning area of Kasaysayan ng Daigdig for the first grading period. It details 3 lessons that will be taught over the course of 12, 10, and 8 hours respectively. Lesson 1 will cover preparing and using hand tools as well as maintaining them. Lesson 2 focuses on selecting components to measure, carrying out measurements, and doing calculations. Lesson 3 identifies different technical drawings and how to interpret them. A fourth lesson covering identifying, evaluating, and controlling hazards and risks is also scheduled for 10 hours. The document was prepared by Patricia Marie N. Pasar Doza.
This document outlines the budget of work for the Araling Panlipunan learning area of Kasaysayan ng Daigdig for the first grading period. It details 3 lessons that will be taught over the course of 12, 10, and 8 hours respectively. Lesson 1 will cover preparing and using hand tools as well as maintaining them. Lesson 2 focuses on selecting components to measure, carrying out measurements, and doing calculations. Lesson 3 identifies different technical drawings and how to interpret them. A fourth lesson covering identifying, evaluating, and controlling hazards and risks is also scheduled for 10 hours. The document was prepared by Patricia Marie N. Pasar Doza.
Download as DOC, PDF, TXT or read online from Scribd
Download as doc, pdf, or txt
You are on page 1/ 3
Republic of the Philippines
Department of Educatiodn Region IV-A, CALABARZON Division of Imus City, Cavite Toclong I-C, Imus , Cavite
IMUS NATIONAL HIGH SCHOOL- GREENGATE ANNEX
BUDGET OF WORK
Sector: ARALING PANLIPUNAN
Learning Area: KASAYSAYAN NG DAIGDIG
NUMBER OF DAYS TO BE QUARTER UNIT LEARNING COMPETENCY TAUGHT
LESSON 1 LO1. PREPAIR HAND TOOLS - 12 HOURS
FIRST GRADING - LO2. USE APPROPRIATE HAND TOOLS AND TEST EQUIPMENT LO3. MAINTAIN HAND TOOLS LESSON 2 - 10 HOURS - LO1. SELECT COMPONENTS TO BE MEASURED LO2. CARRY OUT MEASUREMENTS LESSON 3 AND CALCULATION - - 8 HOURS LO1. IDENTIFY DIFFERENT KINDS OF TECHNICAL DRAWINGS. LO2. INTERPRET TECHNICAL DRAWING. LESSON 4 - LO1. IDENTIFY HAZARDS AND RISKS. - 10 HOURS LO2. EVALUATE HAZARDS AND RISKS. LO3. CONTROL HAZARDS AND RISKS.
