Scribd
Upload
166 views2 pages

A733 PDF

This document provides specifications for a PNP transistor in an SOT-23 package. It lists maximum ratings for voltages and currents. It also provides typical electrical characteristics including breakdown voltages, current gains, saturation voltages, transition frequencies, and noise figures. The transistor has a DC current gain between 120-475 and is classified based on its hFE range as either low or high.

Uploaded by

Bahram4321
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
166 views2 pages

A733 PDF

This document provides specifications for a PNP transistor in an SOT-23 package. It lists maximum ratings for voltages and currents. It also provides typical electrical characteristics including breakdown voltages, current gains, saturation voltages, transition frequencies, and noise figures. The transistor has a DC current gain between 120-475 and is classified based on its hFE range as either low or high.

Uploaded by

Bahram4321
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

A733

TRANSISTOR (PNP) SOT-23

FEATURE
z Collector-Base Voltage 1. BASE
z Complement to C945 2. EMITTER
3. COLLECTOR

MAXIMUM RATINGS(TA=25℃ unless otherwise noted)

Symbol Parameter Value Units


VCBO Collector-Base Voltage -60 V
VCEO Collector-Emitter Voltage -50 V
VEBO Emitter-Base Voltage -5 V
IC Collector Current -Continuous -150 mA
PC Collector Power Dissipation 200 mW
Tj Junction Temperature 150 ℃
Tstg Storage Temperature -55-150 ℃

ELECTRICAL CHARACTERISTICS (Tamb=25℃ unless otherwise specified)

Parameter Symbol Test conditions MIN TYP MAX UNIT

Collector-base breakdown voltage V(BR)CBO IC= -5uA,IE=0 -60 V

Collector-emitter breakdown voltage V(BR)CEO IC= -1mA , IB=0 -50 V

Emitter-base breakdown voltage V(BR)EBO IE= -50uA, IC=0 -5 V

Collector cut-off current ICBO VCB= -60 V , IE=0 -0.1 uA

Emitter cut-off current IEBO VEB= -5 V , IC=0 -0.1 uA

DC current gain hFE VCE= -6 V, IC= -1mA 120 475

Collector-emitter saturation voltage VCE(sat) IC= -100mA, IB=- 10mA -0.18 -0.3 V

Base-emitter voltage VBE(on) VCE=-6V,IC=-1.0mA -0.58 -0.62 -0.68 V

Transition frequency fT VCE=-6V,IC=-10mA 50 MHz

Collector output capacitance Cob VCB=-10V,IE=0,f=1MHZ 4.5 7 pF

VCE=-6V,IC=-0.3mA,
Noise figure NF 6 20 dB
Rg=10kΩ,f=100HZ

CLASSIFICATION OF hFE
Rank L H

Range 120-220 220-475

MARKING CS

１　
JinYu www.htsemi.com
semiconductor

Ｄａｔｅ：２０１１／０５
A733
Typical Characteristics

２　
JinYu www.htsemi.com
semiconductor

You might also like