Scribd
Upload
35 views

Video Title: Installing Windows 98 TI: 5.5.5 Step 1 Description

This document provides instructions for installing Windows 98 in 4 steps: 1) Insert the Windows 98 CD and boot from the CD-ROM to begin setup; 2) Guide the user through the setup process, requesting information like where to install system files; 3) Request user information like name and product key, install hardware and set the date/time; 4) Finish installing hardware, and Windows 98 will start up with the welcome screen, completing the installation.

Uploaded by

Yunita
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views

Video Title: Installing Windows 98 TI: 5.5.5 Step 1 Description

This document provides instructions for installing Windows 98 in 4 steps: 1) Insert the Windows 98 CD and boot from the CD-ROM to begin setup; 2) Guide the user through the setup process, requesting information like where to install system files; 3) Request user information like name and product key, install hardware and set the date/time; 4) Finish installing hardware, and Windows 98 will start up with the welcome screen, completing the installation.

Uploaded by

Yunita
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Video Title: Installing Windows 98

TI: 5.5.5

Step 1 Description
#1 video 1 Place the Windows 98 CD in the CD-ROM drive and Reboot
the computer. When the CD-ROM Startup Menu comes up
choose the option Boot from CD-ROM.
#2 video 1 A second Startup Menu will come up choose the option to Start
Windows 98 Setup from CD-ROM. This will now load the
necessary drivers from the CD-ROM, need to boot.

#3 video 1 A blue screen will appear for the Windows 98 Setup. Press
Enter to set up Windows. Windows Setup will now go through
a series of question to find out how the hard drive should be
configured for this installation. After all the questioning is
complete Windows Setup will format the hard drive in
preparation for the installation.
#4 video 1 Once the formatting of the hard drive is complete the Setup will
run Scandisk to check the integrity of the hard drive. Then the
computer reboots.

Step 2 Description
#5 video 2 Once rebooted a Windows 98 Setup GUI interface screen will
appear, to guide the user through the rest of the setup process.

#6 video 2 The Windows Setup process will stop along the way and
prompt the user for information. First question is where the
system files should be placed. Accept the default C:\Windows.

#7 video 2 Next is the Setup Options and Windows Components, choose


the recommended options.
Step 3 Description
#8 video 3 Now type the user information in the boxes provided. Accept
the License Agreement to proceed. Next, type the product key
and this will put the set up into its final stages.

#9 video 3 Next, Plug and Play will search for the computers hardware and
when it is finished the computer will restart. After the computer
restarts, Windows Setup will Setup the computers hardware.
Next is the Date/Time Properties box, choose the appropriate
setting and click Apply then OK.
#10 video 3 Windows Setup will then finish setting up the Control Panel,
Programs on the Start menu, Windows Help, MS-DOS program
settings, Tuning up Application Start, and Systems
Configuration. Then the computer will restart.
Step 4 Description
#11 video 4 Once the computer is rebooted there is the option to enter a
password for Microsoft Networking. For now just click OK.
#12 video 4 Windows will now locate hardware and install hardware for it.
Windows will then start up and the Welcome to Windows 98
will appear and the install is finished.

You might also like