Scribd
Upload
165 views8 pages

Lab Services Materials Characterization

The document provides a list of 95 items of electrical laboratory equipment along with their parameters. The items include various meters, calibrators, generators, analyzers and testers for measuring quantities like voltage, current, resistance, power, frequency and more. Calibration is to be performed according to manufacturer manuals and using standards like resistors, shunts, capacitors and inductors.

Uploaded by

Owais Malik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
165 views8 pages

Lab Services Materials Characterization

The document provides a list of 95 items of electrical laboratory equipment along with their parameters. The items include various meters, calibrators, generators, analyzers and testers for measuring quantities like voltage, current, resistance, power, frequency and more. Calibration is to be performed according to manufacturer manuals and using standards like resistors, shunts, capacitors and inductors.

Uploaded by

Owais Malik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 8

‫شركة محور الفحص المحدودة‬

C.R. 2051173177
Materials Characterization Laboratory

S. No. Technique Analysis/Test

Scanning Electron Microstructural


01
Microcopy Examination and EDS Elemental
(SEM Analysis
02 Scanning Transmission Microstructure,
Electron Microscopy Diffraction and EDS Elemental
(STEM) Analysis
03 X-Ray Diffraction Microstructural Phase Analysis
(XRD)
X-Ray Fluorescence Bulk Elemental
04
(XRF) Analysis
Electron Probe Microstructural
05
Micro Analyzer Examination and
(EPMA) EDS/WDS Elemental Analysis
Optical Macro and
06
Microscopy Microstructural
Examination
Image Analysis Quantitative
07
Microstructural
Image Analysis
Hardness Testing Micro and Macro-
08
Hardness
Examination
Electron Microstructure,
09
Spectroscopic Binding Energy and Elemental
Chemical Analysis Analysis
(ESCA/XPS)
Auger Microstructure and Elemental
10
Spectroscopy Analysis
(SAM)
Metrology and Standards Section (CAPS)
Calibration Charge: Electrical Laboratory
Item No. Equipment (parameters)*

1. AC Voltage/Current Meter, model 2014,Ranges:


30/75/150/300/750 V, .15/.3/.75/1.5/3/7.5/15/30 A.
2. AC Withstand Voltage Tester (HYPOT II): 5 kV
ac and 3 current measurements.
3. Aluminum Rod (resistance and length over 1
meter)
4. Antenna Meters (Wisi model WA40, Correction
factors at 10 frequency points)
5. Attenuators (one piece, five frequency points)
6. Audio Level Adjust (Dwight Cavendish
model VP-710-01)
7. Audio Monitor (Dwight Cavendish model
VS-628-09)
8. Calibration Box / Calib. Box 2, ( Manufacturer:
Programma )
9. Calibration Resistance Decade, Sefelec
model KDN 1 (used as temp. simulator)
10. Calibrator ( Fluke 5500A or similar)
11. Calibrator (Input modes: V, mV, mA, Thermoc-
ouples, Hz, Output modes: V, mV ,
mA, Thermocouples ).
12. Capacitors ( precision type, one piece, one
frequency point)
13. Capacitor Tester (Hand held type)
14. Clamp Meters: Volt./Curr./Resis. (Fluke36, etc.)
Power meter
15. Copper Rod ( resist. and length over 1 meter )
16. Crest Voltmeter ( 0 to 18 kV )
17. Current Calibrator, Model 262, 0-24 mA
18. Current Probe, DC/AC ( Fluke Y8100 )
19. Current Shunt (dc, gen. pur. type): One piece
Each piece above one
20. Current Shunt ( Fluke Y5020 or similar type)
* Calibration Techniques: Manufacturer’s operating and service manuals.
Metrology and Standards Section (CAPS)
Calibration Charge: Electrical Laboratory
Item No. Equipment (parameters)

21. Data Logger (Fluke 2240C or similar, voltage &


temperature measurement tests)
22. DC/AC Current Probe (Fluke Y8100)
23. DC Voltage/Current Standard, model 2553-41,Yokogawa
24. DC Voltage/Current Standard (model 2554 of ISCOSA)
25. DC Standard (reference standard, 1V and 10V outputs)
26. Decade Resistance Box: five decades, min. resist. :
0.1Ωfive decades, mini. resist.
0.1Ωten decades of resistance
27. Digital Earth Tester ( DET 5/4 D or DET5/4R )
28. Digital Low Resistance Ohmmeter (60 to 6000 Ω)
29. Digital Radio Communication Tester , model CMD55
30. Digital Timer (Programma TM 200)
31. Earth Resistance Tester: Resistance only
Resistance and Voltage
32. Energy Analyzer , Dranetz model 8000
33. Energized Winding Resistance Tester ( involves
precision resistors )
34. Field Calibrator ( 4mA, 20mA, 4-20mA ranges)
35. Flash Tester ( 4 kV )
36. Frequency Counter ( calibrated using Cesium Beam
Standard)
Universal Counter (HP 5315B /100 MHz)
37. Frequency Generator, 0 – 10 MHz of Sabic
38. Function Generator ( Hameg model HM 8030-4 )
39. Function Generator, model TM503, Tektronix
40. Graph Multimeter (contains oscilloscope functions)
41. Ground Bond Tester (HYAMP), model 3030D
( 1 voltage and one current measurement)
42. High Pot Tester, 80V, model 53
Metrology and Standards Section (CAPS)
Calibration Charge: Electrical Laboratory
Item No. Equipment (parameters)

43. High Pot Tester (Al-Zamil, AC volt up to 5 k V )


44. HIPOT tester 60 k V + 4 pieces of 60 k V transformers
45. High Voltage Flash Tester (10kV AC; Trip currents
5mA, 10 mA, 15 mA; Clare A203H/F/J)
46. High Voltage Probe (1000 X), model P6015A, resistance
and dc ratio accuracy up to 20 kV.
47. High Voltage Probe, HV-231-10, 2 % of full scale
48. High Voltage Test Set (model TCU2, up to 50 kV AC)
49. HYAMP (Ground Bond Tester), model 3030D
( 1 voltage and one current measurement)
50. HYPOT II (AC Withstand Voltage Tester) : 5 kV
ac and 3 current measurements.
51. Inductors ( precision type, one each from 100H to 10H
range, one frequency point)
52. Insulation Tester : 0.5 k V/10 GΩ, BM11/BM21,
Yokogawa 2404, Kyoritsu 3007A (only res. test), etc.
Model MJ159 (100MΩVoltage< 1000 V)
53. Insulation Tester Calibration Box: four sets of 10 MΩ,
100MΩ, 1 GΩand 10 GΩ resistors (AVO/Megger
CB101)
54. Jeep Voltmeter ( 0 to 18 kV )
55. Kelvin Bridge (utilizes precision resistors in calibration)
56. Kilovolt Meter Cell ( AC volt up to 60 k V, direct
application of ac voltage to the meter)
57. Kilovolt Meter with Divider ( DC, AC, 20 k V )
58. Kilovolt Meter (KVM 300)with normal load applied:
Calibration through voltage simulation & divider resistance:
Metrology and Standards Section (CAPS)
Calibration Charge: Electrical Laboratory

Item No. Equipment (parameters)

59. L C R Meter
60. Leakage Current Tester, model 3226, etc.
61. Microcal - 2
62. Micro-ohm Meter
63. Microprocessor Tachometer, RS model 205-520
64. Microvolt DMM , Keithley 177
65. Mobile Phone Tester (Wavetek 4106 or similar)
66. Multimeter: Bench Type(non prec.,HM 8011-3)
Bench Type (precision one)
Graph Type (contains oscillos. functs)
Hand held type, Extech 380262, etc.
Model 2480 (bench type)
67. Network Analyzer (3 phase, V/A/W/Hz/Cos )
68. Oil Test Set /Oil Tester(discrete points up to 50kV)
69. Oscilloscope
Oscilloscope (ELECTRONIA, Riyadh Cables)
70. Panel Meters: Voltmeter
Ammeter
Thermometer(one thermocouple)
71. Phase Angle Meter
72. Portable Calibrator (Microcal-2)
73. Power Analyzer (3 phase), model 5100, etc.
74. Power Analyzer (Norma D4355: voltage test-8 ranges,
current test-6 ranges, power test-one volt./one
curr./two power factors, frequency test- 6 points)
75. Power Factor Meter
Metrology and Standards Section (CAPS)
Calibration Charge: Electrical Laboratory

Item No. Equipment (parameters)

76. Power Harmonics Analyzer, Fluke 41 (V,A,W)


77. Power Supply (voltage and current outputs)
78. Primary Current Injection Test Set 2000/2
79. Ratio Tester (Transformer)
80. Relay Tester ( Programma SVERKER 650,
SVERKER 750/760)
81. Resistance Decade Calibration, Reflect
model KDN 1 (used as temp. simulator)
82. Resistance Standard (precision type, one each
from 0.001Ωto 10 MΩrange)
83. Resistance Standard (precision type, one each
From 100MΩto 100TΩrange)
84. Resistance Tester (ETIL make)
85. Resistomat Mikroohmmeter (Burster 2302 S )
86. Rotating/Watthour Standard Meter (Testing at
120V and 240V, six current ranges)
87. RTD Calibrator/Indicator (model 267)
88. Scope Meter
89. Seely Tester Bridge ( Resistance measurement &
output tests)
90. Selective Level Meter (Wisi model WA50A,
correction to the meter reading at
fourteen frequency points)
91. Shunt Resistor
92. Sinadder
Metrology and Standards Section (CAPS)
Calibration Charge: Electrical Laboratory

Item No. Equipment (parameters)

93. Stopwatch
94. Stroboscope
95. Super Cal (Input mode: V, m V, m A, Ω, Hz,
Thermocouples. Output mode: V, m V,
m A, Hz, Thermocouples.
96. Tacho Hi Tester , Hioki model 3404
97. Tachometer : Model DT-205/205B
Mechanical type / Digital type
98. Thermocouple Calibrator/Indicator (model 266)
99. Thermometer, Digital : Fluke model 2190A
100. Timer (Programma TM 200)
101. Transconductance Amplifier
102. Transformer Ratio Standard
103. Triple Power Supply ( Hameg HM 8040 )
104. TV Signal Level Meter (Leader LF941, etc.)
105. Universal Leakage Current Tester, model 3226
106. V A W Meter (model 620)
107. Vibration Analyzer: Displacement, Velocity, Freq. tests.
Displacement, Velocity tests
108. Watthour Standard Meter (voltages:120,240,480 V;
currents: 1,5,12.5,50 A. ISCOSA item)
109. Wattmeter
110. Winding Resistance Test Set (WRT-100)
Metrology and Standards Section, CAPS
Item Equipment (parameters)
No.

1. Radiation Survey Meter ( Geiger Mueller )

2. Radiation Survey Meter ( Ion Chamber )

3. Radiation Survey Meter ( Proportional)

4. Radiation Survey Meter ( Scintillation )

5. Digital Alarm Dosimeters, All types

6. Quartz Fibre Type Pocket Dosimetrs

7. Area Monitors, All types

8. Neutron Rem Counter ( BF3 )

9 Thermoluminescent Dosimetry Service (Monthly Basis Per


User)

10 Thermoluminescent Dosimetry Service (Quarterly Basis Per


User)

You might also like