0% found this document useful (1 vote)
482 views1 page

Digital Indicator Cum Controller: En300 Model

The ACT EN300 Model is a digital indicator and controller that accepts a universal 4-20mA input from devices like pressure and temperature transmitters. It displays the output on a 3 1/2 digit display and has two relay outputs that can be set at different points to control devices like motors or compressors. The indicator is economical, has high accuracy of +/- 0.1%, and provides an inbuilt 24VDC power supply to operate transmitters.

Uploaded by

Abhishek Dutta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (1 vote)
482 views1 page

Digital Indicator Cum Controller: En300 Model

The ACT EN300 Model is a digital indicator and controller that accepts a universal 4-20mA input from devices like pressure and temperature transmitters. It displays the output on a 3 1/2 digit display and has two relay outputs that can be set at different points to control devices like motors or compressors. The indicator is economical, has high accuracy of +/- 0.1%, and provides an inbuilt 24VDC power supply to operate transmitters.

Uploaded by

Abhishek Dutta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DIGITAL INDICATOR CUM CONTROLLER

EN300 MODEL

The ACT EN300 Model is digital indicator which


accepts 4-20mA current and displays the o/p on the 3-
1/2” Digit display. Since it accepts 4-20mA this makes
it universal and hence can be used for pressure
transmitters, temperature transmitters or any other
transmitters with 4-20mAo/p.

Further it also acts as a ON/OFF controller & has 2


relay o/p’s which can be set at 2 different set points. It
can be used to control any device like motor,
compressor etc.

Features:

 Accepts Universal i/p of 4-20mA


 High Accuracy : +/- 0.1% FS
 Economical Price
 Inbuilt 24 VDC to operate Transmitter
 2 Relay o/p (ON/OFF o/p)
 Fully configurable span, set point, hystersis
 96 x 48 universal size
Specifications:
 3-1/2” Digit LED Display
 Display Accuracy : +/- 0.1% FS
 I/p Power Supply 230 VAC Mains, 50Hz
 Inbuilt 24 VDC
 Display Range : -1999 to +9999
 Storage temperature : 0 to 50 deg C
 2 relay o/p, (rating 230VAC, 5A max)
 Standard size 96mmx48mm
 Cut out Size 90x45 (dept 75mm)
ACT Sensors Pvt. Ltd.
Off: Flat No. 1, Ground Floor, Plot No. 543, Heramb Apartment, Kher Section, Shiv Mandir Road, Ambernath (E) PIN: 421501.

You might also like