Power Generation Utilizing Vertical Axis Wind Turbine Hybrid of Solar Power and Piezoelectric For Street Lights in Sta - Maria, Bulacan Bypass Road
Power Generation Utilizing Vertical Axis Wind Turbine Hybrid of Solar Power and Piezoelectric For Street Lights in Sta - Maria, Bulacan Bypass Road
Power Generation Utilizing Vertical Axis Wind Turbine Hybrid of Solar Power and Piezoelectric For Street Lights in Sta - Maria, Bulacan Bypass Road
Presented to the
Department of College Of Computer Studies And Engineering
Colegio De San Gabriel Arcangel
San Jose Del Monte, Bulacan
In Partial fulfillment
Of the Requirements in Research 1
For the degree of Bachelor of Science in Electrical Engineering
By:
TELIC,SHAN BARON C.
CASTROVERDE,RYAN
BOTICARIO,ROCHELLE
CASIA,LITO D.
LIM,ELNORA
Submitted to:
Oct 2019
COLEGIO DE SAN GABRIEL ARCANGEL
ABSTRACT
In recent years we are facing the power cut problems due to increasing demand of
electricity, due to the development of industrial automation that requires huge power.
Multinational companies (MNCs) also need certain Mega Watt (MW) interruption free power
supply. This means that we may experience power cut much more than 60% in the short future.
To compensate this power demand, power production through hybrid energy harvesting from
piezoelectric material, rotational solar panel(sun tracking) and vertical axis wind turbine methods
are used. These concepts can be used separately or combined depending upon electric power
requirement. This project is used to power up the domestic houses and to power up the street
lights in two-way roads. Piezoelectric materials are integrated and placed beneath the road for a
particular distance from the street light. Due to mechanical stress produced by the vehicle,
piezoelectric material produces electrical energy which is then it is stored in grid battery. In
Rotational solar panel method, pendulum concept is used to rotate the solar panel to track the
sun. The aim of this is to get the maximum energy with little use of solar panel. This model has
wheel, which is released periodically by a swinging pendulum. So that the panel attached to shaft
tracks the sun. Power produced from this is also stored in the same battery through charge
controller. Vertical axis wind turbine is placed between the two way roads. Opposite motion of
vehicle on two ways road induces a rotational force on the turbine which in turn produces an
electric power. This power is also stored in the same battery. The battery is then discharged to
COLEGIO DE SAN GABRIEL ARCANGEL
power up the street lights. Same set up is built on the bypass road, so that hybrid energy
produced from these is used to power the street lights in Sta.Maria,Bulacan Bypass road. This
idea makes the street light to be independent of Electricity Board power supply