sg7000 v200r005 Function Descriptions

SG7000V200R005 Function Descriptions
Huawei Technologies Co., Ltd
September 15, 2009

SG7000V200R005 Function Description
Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means
without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All
other trademarks and trade names mentioned in this document are the property of their
respective holders.
Notice
The purchased products, services and features are stipulated by the commercial contract
made between Huawei and the customer. All or partial products, services and features
described in this document may not be within the purchased scope or the usage scope. Unless
otherwise agreed by the contract, all statements, information, and recommendations in this
document are provided “AS IS” without warranties, guarantees or representations of any kind,
either express or implied.
The information in this document is subject to change without notice. Every effort has been
made in the preparation of this document to ensure accuracy of the contents, but all
statements, information, and recommendations in this document do not constitute the warranty
of any kind, express or implied.
Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: [email protected]
HUAWEI CONFIDENTIAL 2
Revision Records
Date Revised Description Author

version
2008-7-23 V1.00 Inherit from V2R3 v1.20 SG7000 marketing
Modify performance index. Add signaling technical support team
replication function, BICC transfer function.

Enhance signaling screening function.
1.1 SG7000-01 ............................................................................................................................ 5
1.2 SG7000-02 ............................................................................................................................ 6
1.3 SG7000-03 ............................................................................................................................ 6
1.4 SG7000-04 ............................................................................................................................ 9
1.5 SG7000-05 .......................................................................................................................... 14
1.6 SG7000-06 .......................................................................................................................... 23
1.7 SG7000-07 .......................................................................................................................... 29
1.8 SG7000-08 .......................................................................................................................... 29
1.9 SG7000-09 .......................................................................................................................... 30
1.10 SG7000-10......................................................................................................................... 30
1.11 SG7000-11......................................................................................................................... 32
1.12 SG7000-12......................................................................................................................... 32
1.13 SG7000-13......................................................................................................................... 35
SG7000V200R005 Function Description Secret
SG7000V200 Function Description
1.1 SG7000-01
Function: Capacity and performance
Description:
1) Capacity
2) performance
3) Capacity and cascading capability
I. SG7000-010101
Function: Capacity
Description:
Item Index
Max. number of links (64-kbit/s) 12,096
Max. number of links (2-Mbit/s) 756
GT capacity 200,000
Max. number of destination signaling points 2,048
Max. number of narrowband signaling link sets 2,048
Max. number of narrowband signaling routes 4,096
Max. number of AS 1,024
Max. number of SCTP associations 5,120
Max. number of ASP 5,120
Max. number of SPMC (SG in STP mode) 1,024
Max. number of local signaling points supported 256
II. SG7000-010201
Function: Performance
Description:
2009-9-15 HUAWEI CONFIDENTIAL Page 5 of 37

Item Index
Max. load over 64-kbit/s signaling link 0.99Erl
Max. load over 2-Mbit/s signaling link 0.95Erl
Max. load over 1.544-Mbit/s signaling link 0.95Erl
Message transfer delay 3–15ms
Max message processing capability 4920K MSU/s
Max GTT capability 2800K GTT/s
GTT capability of 64-kbit/s signaling link 80GTT/s
GTT capability of 2-Mbit/s signaling link 2356GTT/s
Max SIGTRAN processing capability (each of 10000 Packet/s

SBPU board)
III. SG7000-010301
Function: Capacity and cascading capability

Description:
The system can hold up to 16 frames in cascading mode with each frame containing 12 service
processing units (SBPUs or SBPIs).
Each SBPU provides 64 NSL or 4 HSL (Q.703) or 2 HSL (ATM). It has broadband protocol
processing capability, with each unit providing 32 IP connections.
Each SEPU provides 16 E1/T1 ports.
Each SBPI provides a 10/100M FE interface. This board is configured when broadband services
are processed.
1.2 SG7000-02
Function: Interface
Description:
Circuit interface: E1 interface (2.048 Mbit/s), T1 interface (1.544 Mbit/s)
Clock interface: 2.084 Mbit/s, 2.048 MHz and 8 kHz clock signal interfaces
FE interface: 10BaseT/Fx and 100BaseT/Fx
Standard NM interface: SNMP interface
Other: supporting MML
Supporting bit reverse function for convenient interconnection of the equipment
1.3 SG7000-03
Function: Basic networking
Description:
1) STP, constructing signaling network
2) SG, constructing NGN
3) IP STP, constructing 3G and IP signaling networks
4) Signaling System No.7
5) SS7 over IP
I. SG7000-030101
Function: STP, constructing signaling network

Description:
Signaling transfer point (STP) is a device to transfer signaling from one signaling point (SP) to
another. In PSTN, the SG7000 is capable of processing and transferring signaling, featuring the
functions of a traditional narrowband STP.
Currently, China constructs No.7 signaling network in three hierarchies, namely, HSTP, LSTP, and
SP hierarchies. The SG7000 can be used as the HSTP and the LSTP, providing 14-bit and 24-bit
signaling point codes (SPCs).
See section 1.1 II. SG7000-010201 and 1.1 III. SG7000-010301 for detailed indexes.
II. SG7000-030201
Function: SG, constructing NGN

Description:
The SG7000 has complete SIGTRAN and SS7 protocols, implementing interworking between
broadband signaling and narrowband signaling.
The SG7000 interconnects with the softswith and other IP-based database devices (such as the
IP-HLR, IP-SCP, and IP-SMSC) in distributed gateway model to handle the interworking of the
SS7 between traditional PSTN/PLMN and NGN.
The SG7000 uses E1 interfaces and standard SS7 protocol to connect with the equipment of
PSTN/PLMN, and uses IP interfaces and standard SIGTRAN protocol to connect the equipment
of NGN, thus implementing the bearer of SS7 over IP.
See section 1.1 II. SG7000-010201 and 1.1 III. SG7000-010301 for detailed indexes.
III. SG7000-030301
Function: IP STP, constructing 3G and IP signaling networks

Description:
Along with the development of the NGN and CDMA network, IP-based SIGTRAN protocol
comes into being. The SIGTRAN protocol is a protocol stack used in IP networks to transmit
signaling and protocols of the circuit switching network (CSN). The standard primitive interface
supported by the SIGTRAN protocol does not change the existing CSN signaling, thus ensuring
the CSN signaling can be directly used without being modified.
Signaling at the bottom layer is transmitted through standard IP protocol. The SIGTRAN protocol
is used to implement IP-based signaling transmission and construct IP-based signaling network.

IV. SG7000-030401
Function: Signaling System No.7

Description:
SG70000 have implemented Message Transfer Part (MTP1/2/3), signaling connection control part
(SCCP), Transaction capability application part (TCAP), Operations, maintenance and
administration part (OMAP) of Signaling System No.7.
Implementation Distribution of MTP Functions
The first functional level of SG7000 MTP（MTP1） is on SEPU board, with functions
implemented by hardware. SEPU provides E1/T1 interfaces.
The second functional level of SG7000 MTP（MTP2） is on SBPU board, with functions
implemented by hardware and software jointly. Each of the SBPU board provides 32 NSL(Normal
Speed Link ) or 4 HSL（High Speed Link）. The signal unit delimiting and alignment, error testing
are implemented by hardware. SBPU board can preprocess the signal units sent by the second
functional level of MTP by setting micro-code control, so as to realize error monitoring, filter
FISUs, and decrease the load of the main processor. The main processor implements such
functions as message transfer, link status control, error correction, initial alignment start and flow
control.
The third functional level of SG7000 MTP（MTP3） is on SBPU board and the HSYS board,
implementing such message processing functions as message allocation, message authentication
and message routing in addition to the signaling network management functions.
Implementation Distribution of SCCP/TCAP/OMAP Functions
SCCP/TCAP/OMAP functions are mainly distributed on the HSYS board and SBPU board
SCCP, As part of the UP, the signaling connection control part (SCCP) belongs to the fourth
function level in the SS7. It provides additional functions to the MTP to transmit the circuit related
and non-circuit related information and other information between the exchange offices of telecom
network and specialized centers over the SS7 network. Thus the connectionless and connection
oriented network services are created. . It forms the third layer (network layer) of the OSI layered
model.
TCAP, Transaction capability means providing communication capability between various
applications and network services. It provides functions and regulations independent of the
specific applications for exchanges and special service centers spread in the network in a large
number. TCAP uses the addressing mode supported by SCCP and based on connection oriented
and connectionless services of SCCP. The TCAP process is divided into component sub-layer
process and transaction sub-layer process.
OMAP, Monitoring and measurements for the SS7 are finished by a separate software module in
an SG7000, and realized with single monitoring item as the drive, and monitoring classification
such as permanent, semi-permanent and activated as the course. In an other word, the monitoring
processing course is unrelated to specific items. In this way, the system can add or reduce the
monitoring item flexibly, to make the monitoring system less complex and more accurate.
Management Function of SS7, As a terminal user of SS7, the management functional module is on
its top layer, checking data of SS7 by using SS7 regulations. Meanwhile, during the check, using
of the data by the network itself is also checked.

V. SG7000-030501
Function: SS7 over IP

Description:
SG7000 provide SIGTRAN protocol for transmit SS7 over IP network. SIGTRAN stack is the
protocol stack that supports transmission of switched circuit network (SCN) signaling protocol
over IP network. This protocol stack supports the inter-layer standard primitive interface defined
in SCN signaling protocol hierarchy model, so as to ensure utilization of the existing SCN
signaling application without modification. Simultaneously, it also uses the standard IP transport
protocol as the transmission bottom layer, and satisfies the special transmission requirements for
SCN signaling by adding its own functions.
SG7000 provide M3UA/SCTP/IP or M2PA/SCTP/IP protocols for transmit SS7 over IP network.
1.4 SG7000-04
Function: Basic function
Description:
1) Multiple signaling point codes
2) MTP load sharing
3) SCCP load sharing
4) Enhanced multi-point code load sharing
5) Multiple logical networks
6) Semi-permanent connection
7) Voice channel connection
8) Test connection
9) OMAP-MRVT
10) OMAP-SRVT
11) Traffic Congestion Control Function(link monitoring)
12) 2M High Speed Signaling Link Function
13) MTP&SCCP Loop Detected
14) BICC transfer function
I. SG7000-040101
Function: Multiple Signaling Point Codes

Description:
Support Multiple Signaling Point Codes function.
Max. number of local signaling points supported is 256.
II. SG7000-040201
Function: MTP Load Sharing

Description:
SG7000’s Basic MTP Load Sharing
There are route and link selection fields (4-bit values, generally called SLS mask) respectively in
the destination signaling point table and the link set table of SG7000. If bit n of the SLS mask (0 ≤
n ≤ 4) is 1, then the 16 SLS values can be divided into 2n groups. For selecting a route in a route
set and a link in a link set, SG7000 adopts the similar algorithm.
Load sharing in MTP3 extension is: routing for ISUP messages and TUP messages is no longer
done according to the SLS, but according to the middle or higher four bits of the CIC (TUP, ISUP
message). However, the links are selected according to the SLS. In this way, the rule for selecting
the route is different from that for selecting the link, and the load can be shared more evenly.
Load sharing among multiple signaling points: When the multiple signaling point mode is adopted,
the SG7000 can share the load among the outgoing link sets by dividing the incoming link sets
into different groups. In this way, the load in a certain office direction can be evenly shared among
different link sets. Furthermore, this algorithm can adjust the group data according to the service
changes in different office directions, so as to share the load evenly.
MTP dummy SLS load share: SG7000 selects routes according to the actual SLS of the messages,
but selects links according to the dummy SLS producing by the lower 4 bit of message’s OPC and
actual SLS, so different OPC may make the messages with the same actual SLS transmit by
different links and make the load be shared evenly.
III. SG7000-040301
Function: SCCP Load Sharing

Description:
Support SCCP flexible Load Sharing or Active/Standby among 16 DPCs / DPC_SSNs:
z 16 DPCs / DPC_SSNs have priority attribute;
z Among DPCs / DPC_SSNs with the same priority, adopt Load Sharing
z Among DPCs / DPC_SSNs with the difference priority, adopt Active/Standby
For the services of class 0 with no sequence requirement, SCCP will set the SLS values of
messages as needed, generally to make the SLS values distribute evenly for each destination
signaling point.
For the services of classes 1 with sequence requirement, SG7000 could execute load sharing
according to the following parameters: (including the services of classes 0):
z Signaling link selection code
z Input Signaling linkSet code
z OPC
z Calling GT
IV. SG7000-040401
Function: Enhanced Multi-point Code Load Sharing

Description:
The enhanced multi-point load sharing function implements the following:
z SCCP dynamic load sharing between sixteen signaling points, with each
signaling point bearing up to 16 links
z Multi-route dynamic load sharing between multiple signaling points

z Multi-route dynamic load sharing between non-binding groups
V. SG7000-040501
Function: Multiple Logical Networks

Description:
Logical network function is a technology implemented on the STP in the signaling network, that is,
to divide an STP into multiple logical devices and each device provides services for a network.
The features of the logical networks are as follows:
z Taking advantage of the multiple logical network features, the signaling
network can provide services to different telecom operators;
z The services of different logical networks are separated;
z The logical networks have no impact with SS7 specifications, and do not
depend on the NI of MTP.
z Each logical network can own one or more signaling point codes; or multiple
logical networks share one signaling point code;
z Internetworking between different logical networks can be implemented on
the SCCP layer.
At most 128 logical networks are supported.
VI. SG7000-040601
Function: Semi-permanent connection

Description:
A semi-permanent connection determines a board to which an accessed E1 is connected. The
board can be a trunk board in another slot, or the front board in the same slot as the back board.
Semi-permanent connection contains the following four connections:
z Signaling timeslot connection
z Voice channel timeslot connection
z Monitoring forward signaling connection
z Monitoring backward signaling connection
All the four connections support cross-slot timeslot connections in a same domain.
Capacity: supporting 64 cross-slot timeslot connections in a same domain.
The SEPU supports any connections of an accessed timeslot (timeslots can be up to 512 x 512)
VII. SG7000-040701
Function: Voice channel connection

Description:
A voice DXC transfers a timeslot from an E1 of an SEPU to the timeslot of another E1 so that the
voice channel is transferred. The E1 can be on the same SEPU or on another one.
VIII. SG7000-040801
Function: Test connection

Description:
Test connection is also called monitoring signaling connection. Monitoring signaling connection is
divided into forward monitoring and backward monitoring. Forward monitoring monitors
accessed signaling and backward monitoring monitors the processed signaling. The monitoring
can be implemented across the slots. If the monitoring party and the monitored party are not in the
same slot, the signaling is monitored across the slots.
IX. SG7000-040901
Function: OMAP-MRVT- MTP route verification test

Description:
MRVT mainly aims to confirm whether data in the route table are consistent. It is fulfilled through
the distribution of the test message. It transfers the test messages along all the routes that can reach
the test destination and registers the past STP identification codes. The whole test concerns:
z Whether there is cyclic loop in MTP.
z Whether the route is ultra long.
z Whether the destination place can be identified.
z Bi-directionality of the signaling relation.
X. SG7000-041001
Function: OMAP-SRVT SCCP route verification test

Description:
SRVT is a way to test SCCP global title translation service. The test aims to verify whether the
global title translation data is accurate, integrate and compatible at the global title translation
service points. The whole test concerns:
z Parallel SCCP route points (standby translation signaling points).
z Serial SCCP route points (multiple translation signaling points).
z Multiple destination points consistent with the global title under test.
z Whether there is cyclic loop in SCCP route.
z Whether the destination place can be identified.
XI. SG7000-041101
Function: Traffic Congestion Control Function (link monitoring)

Description:
SG7000 performs link monitoring function on every link. The traffic load is measured all the time.
In case of overload in SPs, SG7000 provides a signaling protocol based solution. All links in the
system operate with 5 levels of congestion. The congestion level ‘0’ means no congestion. The
other four congestion levels are all configurable. When the traffic is above a congestion level,
SG7000 will send TFC with a congestion status to the origination point code after receiving 8
signaling messages from the origination point code. When the origination point code received
TFC, it will control signaling traffic to the STP. There are 5 debate levels correspondingly. When
the traffic falls below the debate level, SG7000 will stop sending TFC with that level status. A
discard level is used as threshold to discard messages. All these parameters can be configured in
SG7000.
XII. SG7000-041201
Function: 2M High Speed Signaling Link Function

Description:
In the SS7 signaling network, a large number of 64Kbit/s signaling links conforming to ITU-T Q
specifications are used. With the growing traffic flow over the signaling network, new
technologies are required to solve the problem of 64Kbit/s signaling link transmission bandwidth.
ITU-T Q.703 2Mbit/s and ATM 2Mbit/s high speed signaling link are a major technology used to
solve this problem.
ITU-T Q.703 2Mbit/s high speed signaling link technology evolves from ITU-T Q.703 and ITU-T
Q.704 protocols. The equipment adopting this technology can be used to connect to the remote
signaling equipment as an integral signaling link, representing all time slots or part of continuous
time slots (N X 64K) of an E1 interface.
ATM 2Mbit/s high speed signaling link is another method of realizing high speed signaling link
technology. It is a signaling link realized by using the ATM technology over the
quasi-synchronization network. From a stack protocol viewpoint, ATM 2Mbit/s high speed
signaling link replaces signaling links MTP1 and MTP2 based on a set of ATM protocols (ITU-T
Q.2110, ITU-T Q.2140 and ITU-T Q.2144) with those based on ITU-T Q.703 protocol, as shown
in the following figure.
Signaling links are point-to-point connections. So the ATM connections required by ATM 2Mbit/s
high speed signaling links are also point-to-point connections and there is no ATM switching
equipment in between, which is only used in bearing the SSCOP protocol.
Since signaling messages are packaged into ATM cells that have fixed lengths (53 bytes) and are
transmitted over the E1. The length of signaling messages directly affects the usage of the link
transmission bandwidth. This is a technological restriction of ATM 2Mbit/s high speed signaling
link.
MTP3
SSCF
MTP2 SSCOP
AAL5/ATM
MTP1 G.804
Q.703 64K/2M Link ATM 2M Link

Figure 1-1 HSL protocol stack
XIII. SG7000-041301
Function: MTP & SCCP Loop Detected

Description:
Loop detected is a kind of service to detect that messages route ceaselessly between two signaling
net units and make the high link load to affect other traffic because of mistake route data or SCCP
data. The procedures of the service are as follows:
MTP Loop Detected:
SG7000 compares the outgoing linkset with the incoming linkset of a message
If they are the same linkset, SG7000 will throw the message and give an alarm
SCCP Loop Detected:
Received message will do GTT with GT+DPC result
SG7000 compares final DPC with incoming OPC of message
If they are the same SPC, SG7000 will throw the message and give an alarm
XIV. SG7000-041401
Function: BICC transfer function

Description:
SG7000 can transfer BICC message if the BICC message is based on M3UA protocol or M2PA
protocol. In 3GPP R4 structure, MSS will use BICC message instead of ISUP message to build
voice calls, if the BICC message is based on M3UA protocol, it can be transferred by SG7000. In
addition if SG7000 are connected to each other by M2PA links, the BICC message can be
transferred between SG7000.
The maximum length of BICC message that SG7000 can transfer is up to 1500 Bytes.
1.5 SG7000-05
Function: Optional Function
Description:
1) SS7 FIREWALL
2) IUA convergence
3) MNP (mobile number portability)
4) FNR (Flexible Number Routing)
5) NPDB management entity
6) SMS Router
7) SMS Filter
8) ITU and ANSI protocol Conversion
9) Black&White Lists
10) Number transform
11) Terminal Information Collector (TIC)
12) Enhanded Routing Function
13) IN voice call Bypass
14) IN SMS Bypass

15) International roaming and SIMM with IN
16) Preferred network
17) SUA function
18) CDR function
19) CFS function
20) Signaling replication function
I. SG7000-050101
Function: Signaling Screen

Description:
The interconnection between different telecom operators’ signaling networks facilitates the
cooperation between them. However, some operators may snatch profit by sending illegal
signaling messages. To prevent such events, firewall is used.
The function of firewall is to detect and intercept the illegal packets and ensure the legal ones be
transmitted normally.SG7000 provides the signaling firewall function, which masks the illegal
signaling messages through specific signaling devices. This function can mask the messages of
specified signaling points or of a specific type, thus ensure the security and reliability of the
signaling network.
At most, 10K screening rules is supported.
SG7000 can realize the protocol on the layer of MTP, SCCP, MAP. Every protocol layer could be
screened according to the following parameters:
- On the MTP layer the message could be screened according to the following parameters:
OPC, DPC, SIO, H0H1, TFM, and combination of OPC+DPC+SI
- On the SCCP layer the message could be screened according to the following parameters:
Message Type (UDT/UDTS/XUDT/XUDTS), Calling/ Called GT, SSN, Calling/ Called GT
Translation Type (GT Translation Type: DPC+GT, DPC+SSN, DPC+ new GT and DPC)
- On the MAP layer the message could be screened according to the following parameters: MAP
operation code: MO/TON/NPI/OA or MAP operation code: MT/OA/IMSI
SG7000 supports to record the detail information of screened messages.
II. SG7000-050201
Function: IUA convergence

Description:
In NGN, because the capacities of the access devices (IAD and AG) are small and the amount of
these devices is huge, when they access to the SoftX3000 through the IP network, it is hard for the
SoftX3000 to manage and handle all the links of them. In this case, SG7000 can be used to
converge the links and then transfer them to the SoftX3000.
Performance: The performance of each SBPU connected to the IAD is 1000 packets per second.
The performance of each SBPU connected to the softswitch is 3500 packets per second.
Capacity: Each SBPU connected to the IAD supports at most 1250 IUA links.
Each SBPU connected to the softswitch supports at most 8 IUA links.
III. SG7000-050301
Function: MNP (mobile number portability)

Description:
To balance the competitiveness between mobile network operators, the governments of some
countries require the service providers to provide the NP service between mobile networks. With
the MNP service, subscribers can change their network operators without changing their
MSISDNs. The newly subscribed network operator will allocate a new IMSI (contained in the
SIM card) to the NP subscriber.
SG7000 support the following MNP Scenarios:
1. GSM subscribers ported in other GSM network, vice versa
2. CDMA subscribers ported in the GSM network, vice versa
3. GSM subscribers ported in the 3G network, vice versa
The SG7000 implements the MNP service based on the signaling relay function (SRF) of the
following standards:
3GPP Specifications:
3GPP 22.066: Support of Mobile Number Portability (MNP); Service description.
3GPP 23.066: Support of Mobile Number Portability (MNP); Technical realization.
ETSI GSM Specifications:
GSM 02.66: Support of Mobile Number Portability (MNP); Service description.
GSM 03.66: Support of Mobile Number Portability (MNP); Technical realization.
Implementation of the SRF service: The SG7000 is logically located before the HLR to intercept
the SRI message sent by the MSC to obtain the called MSISDN. After that, the SG7000 queries
the NP database:
z If the callee is in the local network (originally a local network user or a user
ported in from another network), the SG7000 sends the SRI message to the
homed HLR.
z If the callee is in a non-local network (originally a non-local network user or a
user ported out from the local network), the SG7000 returns an SRI_ACK
message to the MSC. The MSRN in the message is filled with
"RN+MSISDN" which is used by the MSC to connect the call to the correct
network. RN stands for routing number. After the MNP service is enabled,
each network operator is allocated with at lest one RN which is used for
addressing.
For the MNP service of pre-paid users, the SG7000 provides two solutions:
z The SG7000 provides the ATI query mode to implement the MNP service.
The IN network obtains the user NP information from the SG7000-NPDB
through the ATI query interface and then performs relevant processing
(mainly distinguishes the tariff rate) based on the user NP status. After the
processing, the IN network provides the MNP service for the pre-paid users.
The ATI query interface complies with 3GPP TS 23.078 standard.
z The SG7000 intercepts the IDP message of the SCP and queries the NPDB
based on the called number. Then the SG7000 adds the RN to the front of
the called number and routes the IDP message to the SCP. The SCP obtains
the user NP information based on the called prefix in the IDP message and
then performs relevant processing (mainly distinguishes the tariff rate). After
the processing, the SCP provides the MNP service for the pre-paid users.
For details of the MNP service implementation, see Technical White Paper for MNP Service.
IV. SG7000-050401
Function: FNR (Flexible Number Routing)

Description:
In the mobile network, the user data is allocated to the HLR based on the MSISDN segment or
IMSI number segment. In this case, the MSC obtains the homed HLR address based on the
MSISDN segment or IMSI number segment. With the FNR service, network operators can
flexibly allocate MSISDN and IMSI numbers regardless of the HLR address and number ranges.
This makes the numbers fully used and reduces the number waste. In addition, network operators
can easily allocate number regardless of number mapping relations.
Based on 3GPP TS23.066 standard, the SG7000 adopts the signaling relay function (SRF) scheme
to implement the FNR service. The SG7000 is logically allocated before the HLR. All SCCP
query messages are routed to the SG7000 (SRF). The SG7000 (SRF) analyzes the called MSISDN
or IMSI number in the SCCP message and then queries the database to obtain the address of the
HLR in which this called number is stored. Then the SG7000 modifies the called number in the
SCCP message to the HLR address. Thus, the message is routed to the correct HLR.
For details of the FNR service implementation, see Technical White Paper for FNR Service.
V. SG7000-050501
Function: NPDB management entity

Description:
When being provided with the NP (MNP or LNP) service, some powerful network operators
require constructing a unified NPDB management system in the network to manage the routing
data of NP users. The SmartKey is the unified management system. It obtains the NP data from the
national NP database or the NPDB of other network operators and then issues the data to the
NPDB (STP-NPDB) of each network element. The networking structure of the NPDB is as
follows:

NPAC
SOAP/XML
SOAP/XML
SOAP/XML
SOA
BOSS
SmartKey Server
IP
NPDB NPDB NPDB

SG7000 ……
SS7 / SIGTRAN
MSC
The currently provided SmartKey is developed based on Number Portability Clearinghouse (NPC,
that is, NPAC entity) of Telcordia. It provides the following external interfaces:
z The SmartKey Server is connected with the NPC (NPAC), BOSS, and SOA
Client through SOAP1.1.
z The SmartKey provides the client based on web browser, and you can
directly maintain the data through the web browser.
z The SmartKey is connected with the STP-NPDB through the DB-Library
protocol. Any NPDB complying with this protocol can access the SmartKey
after adaptation.
z For other network elements that do not support the DB-Library protocol, the
SmartKey synchronizes the NPDB file through FTP and then provides the
file to these network elements.
The SmartKey is physically based on SUN Netra240. Its operating system is Solaris 10 and its
database is Sybase 12.5. For details of the SmartKey, see Technical White Page for SmartKey.
The SmartKey can store up to 12,000,000 pieces of NP data.
Note:
NPAC: Number portability administration center
SOA: Service order administration
About SOAP: SOAP stands for Simple Object Access Protocol. It provides a simple and
extendable XML message processing frame with rich functions. It is used to define
high-level application protocols so as to provide higher interoperability in the distributed
heterogeneous environment. It has the following advantages: 1) It can be extended. 2) It

can be used over any transmission protocol (such as TCP, HTTP, and SMTP) through
lower-layer protocols. 3) It is independent from programming model.
VI. SG7000-050601
Function: SMS Router

Description:
SMS Router, a smart short message deliver integrated in Huawei SG7000, can accomplish SMS
routing to the right SMSC according to callee or caller number.
VII. SG7000-050701
Function: SMS Filter

Description:
SMS Filter, a smart short message filter function integrated in Huawei SG7000, can accomplish
SMS screen according to MAP operation code (MO/MT). SG7000 also can transfer all MO/MT
messages of SMS to the third party SMS filter center. The third party SMS filter center detects
SMS content and filters these spamming/flooding/faking/spoofing SMS and transfer normal SMS
to subscribers.
VIII. SG7000-050801
Function: ITU and ANSI protocol Conversion

Description:
The ITU and ANSI protocol Conversion function implements the interworking between the ITU
network and ANSI network. SG7000 provides MTP protocol Conversion and SCCP protocol
Conversion.
IX. SG7000-050901
Function: Black&White Lists

Description:
When used as a signaling transfer point (STP), the SG7000 bears and forwards all signaling
messages. In this case, the screening service based on the calling and called number can be easily
deployed on the SG7000.
When intercepting an IAM, the SG7000 analyzes whether the message meets the screening
requirement based on the calling number and called number. If yes, the SG7000 returns an REL
message (with configurable value), screens the IAM, and ends the processing. If not, SG7000
transparently forwards the IAM.
X. SG7000-051001
Function: Number transform

Description:
When used as a signaling transfer point (STP), the SG7000 bears and forwards all signaling
messages. In this case, the Number transform service based on the user number can be easily

deployed on the SG7000.

When intercepting an IAM, the SG7000 analyzes whether the message meets the Number
transform requirement based on the calling number and the callee number: If yes, the SG7000
changes calling number and callee number as configurations and then send it out to the signaling
network. If not, transmit the message as normal.
XI. SG7000-051101
Function: Terminal Information Collector (TIC)

Description:
TIC is a kind of service in which the network provides users with customized services according
to the user terminal type and location. The procedures of the service are as follows:
The SG7000 catches a message between the MSC/SGSN and the EIR.
The SG7000 gets user information from the message.
The SG7000 sends the information to the TMS (Terminal Management
System).
The TMS collects the user information.
The TMS system provides the relevant service to the user.
Notes ：TMS is generally provided by operator.
XII. SG7000-051201
Function: Enhanced Routing Function

Description:
Before routing the MTP or SCCP signaling messages to the destination according to DPC or GTT,
SG7000 will check if the messages need to be routed based on MAP operation code according to
the special routing principle data configured in system. If the specific parameters of the message
match to special routing conditions, SG7000 will route the message to the special destination,
otherwise SG7000 will route the message as general case.
If the special routing destination node is unreachable due to malfunction or some other reasons,
SG7000 supports routing the messages as general case or discarding the messages.
The special routing conditions that can be configured in SG7000 include:
z MAP operation code
z Calling GT – including Translation Type
z Called GT – including Translation Type
z OPC
z DPC
z Linkset
z Network Type
MAP operation code: The MAP operation code specified in GSM 09.02 protocol phase 1, phase
2 and phase 2+, for example: Update_Location, MO_Forward_SM.
Calling GT: The calling party address in SCCP layer.
Called GT: The called party address in SCCP layer.
OPC: The origin signaling point code of the message.
DPC: The destination signaling point code of the message.
Linkset: The link set index that applies this special routing function. For example, if the message
comes from the specific link set, it will be routed based on MAP operation code. But if the same
message comes from other link set, the message will be routed as general case.
Network Type: Configuring whether this special routing function is available for all TDM links
and/or all SIGTRAN links.
The routing conditions can be any combination of above.
XIII. SG7000-051301
Function: IN voice call Bypass

Description:
IN voice call Bypass function intercepts the free call IDP and return Continue message directly
back to MSC, to reduce the load of IN system. The free call conditions can be configured flexibly,
for example, time-based conditions, called number-based and calling number-based conditions.
XIV. SG7000-051401
Function: IN SMS Bypass

Description:
Prepaid subscriber can apply to be a free SMS subscriber, when this subscriber send a short
message, SG (Bypass server) will intercepts the IDP from MSC to IN system and return back
Continue message to make the short message go on, so the IDP message does not go to IN system
and load of IN system will be reduced. The conditions on Bypass server can be configured
flexibly.
XV. SG7000-051501
Function: International roaming and SIMM with IN

Description:
International roaming function is supported by SG and IN system together. It provides each
subscriber an ability to roam to international network because of prepaid mode for the roaming fee.
SG intercepts and processes PRN, SRI_ACK and ISD etc, sends information or relays signaling
message to IN system to do billing, SIMM and other service for roaming subscriber.
XVI. SG7000-051601
Function: Preferred network

Description:
There are more networks can be registered when subscriber is roaming, maybe one of the roaming
network is more favourable. Preferred network function supports to refuse the registration
message from other networks but the preferred network, so that the subscriber can be registered to
the preferred network.
XVII. SG7000-051701
Function: SUA function

Description:
SG7000 supports SUA (SCCP User Adapter Layer) function for SIGTRAN network. In this case,
SG7000 provides translation function between No.7 and SUA, M3UA and SUA, M2PA and SUA
and so on.
XVIII. SG7000-051801
XIX. SG7000-051901
Function: CFS function

Description:
The call filter service, also called the CFS, is the black and white list service application. The
system obtains the calling and called numbers from the intercepted ISUP/INAP message and
determines whether to shield this call according to the configured rules. It is the enhanced Black
and White list feature; it can support the implementation principles as below.
z Checking the calling number length: It is required that the length of the calling
number must be in a valid range. This avoids some fraud calls, for the system
cannot normally charge the calls if the calling number is rather short.
z Checking the call type: The system has certain restrictions on special calls for
each subscriber. For example, some subscribers are not allowed to make toll
calls or called party prepaid calls.

z Checking the Personal list: The Personal list records the ordinary called party
groups that a subscriber is not allowed to make calls to.
z Checking the Common list: The Common list records some commonly-used
special numbers that an ordinary subscriber is not allowed to dial.
z Checking the Public list: The Public list records the numbers that are not
allowed to dial. The subscriber data configuration determines whether the
system restricts the calls based on calling or called numbers.
XX. SG7000-052001
Function: Signaling replication function

Description:
SG7000 supports to replicate the signaling message to a third-party platform while transfer the
signaling message to the normal destination. SG7000 can replicate the message based on the
following conditions:
z Incoming link set
z OPC
z DPC
z SCCP CgPA
z SCCP CdPA
z MAP Operation Code
z Combination of above
If this function is activated, once received a signaling message, SG7000 will check whether the
message matches the replication conditions. If it matches any replication condition, SG7000 will
replicate a same signaling message and send it to pre-configured destination and transfer the
original signaling message to the normal destination.
SG7000 supports a backup destination for the replicated signaling message, which means if the
active destination is unreachable, SG7000 can send the message to a backup destination if it has
been configured.
1.6 SG7000-06
Function: OAM
Description:
1) Maintenance management
2) Data management
3) Alarm
4) Online Signaling Message Tracing, Record and Decoding Function
5) Statistics
6) NTP
7) Hot-patch
8) NMS
9) Pseudo-message Function

10) GT test Function

11) QoS Measurement
12) Report System
I. SG7000-060101
Function: Maintenance management

Description:
Maintenance management provides multiple maintenance control methods such as query, display,
switchover, reset, isolation, block and activation. By using these maintenance control methods,
efficient management and maintenance operations can be performed on the hardware components,
system resources (load of CPU), signaling links, clock links and physical ports of the SG7000
system, as well as terminals under its control.
II. SG7000-060201
Function: Data management

Description:
Data configuration:
Support MML command and GUI interface. Data management provides multiple database
operation methods such as addition, deletion, modification, query, storage, backup and restoration.
By using these database operation methods, efficient management and maintenance can be
performed on the various data (including equipment data, signaling data, routing data) which runs
on the SG7000 system.
Data backup:
At 4:30 every morning, the system automatically backs up the BAM database and the registry in
the default directory: E:\MSSQL\DATA. Principles are as follows:
z The data backed up from Monday to Saturday is kept for one week.
z The data backed up on Sunday is kept for one month.
z On the first day of each month, the data is backed up.
Commands are supported in data backup. The system supports network backup.
III. SG7000-060301
Function: Alarm
Description:
Alarm management receives and handles the variety of alarm information generated by the system.
Depending on the category and severity level of the alarms, the appropriate alarm terminal device
such as the alarm box or the alarm station will be driven to produce different audible and visual
signals. Moreover, the corresponding alarm message will be interpreted and then transmitted to the
network management center through the network management interface. In addition, alarm
management also has the functions to store the alarm information, query the alarm history and set
the alarm processing mode.
IV. SG7000-060401
Function: Signaling trace

Description:
To realize built-in online No.7 signaling monitor and decoding functions, additional interfaces are
unnecessary for SG7000 of Huawei. SG7000 can perform real-time display and information
decoding of the monitored signaling link information in the background maintenance terminal.
Moreover, this function brings no affection to the normal working signaling links at all.
The built-in real-time online monitor function of NO.7 signaling can provide functions such as
real-time online signaling monitor, message decoding and tracing message storage. In addition,
certain link, multiple links or all links can be selected for tracing. The interface of NO.7 signaling
online monitor function is illustrated as the figure below:
Figure 1-2 Online Message Tracing, Record and Decoding
The built-in real-time online monitor function of NO.7 signaling can provide the following
functions:
(1) Real-time online signaling trace;
(2) Real-time online signaling filter: Filtering conditions can be flexibly set, including DPC,
OPC, SI, NI, H0, H1, SLS, CIC and message direction;
(3) Detailed signaling decoding: The decoding format is the same as the universal No.7 signaling
analyzer, and the tracing message can be explained to the user level (TUP/ISUP/MAP/INAP);
(4) Traced signaling storage: Facilitate subsequent analysis;
(5) Tracing of partial links and link sets, or all signaling links.
The built-in real-time online monitor function of NO.7 signaling greatly facilitates deployments of
backbone network engineering of China Mobile and provincial signaling network engineering and
at the same time facilitates daily maintenance. This greatly improves the deployment and
maintenance efficiency. Thanks to its power functions, cost is effectively reduced, so it is highly
appraised by the engineering personnel and maintenance personnel of users.
V. SG7000-060501
Function: Statistics
Description:
SG7000 provide signaling statistics function, fully comply with ITU-T Q.752 standard. At the
same time, SG7000 support statistics function of M3UA/M2PA protocol.
VI. SG7000-060601
Function: NTP
Description:
SG7000 support NTP protocol in BAM server.
VII. SG7000-060701
Function: Hot-patch
Description:
SG7000 support hot-patch function in service.
VIII. SG7000-060801
Function: NMS
Description:
SG7000 support Huawei iManager N2000/M2000 UMS.
IX. SG7000-060901
Function: Pseudo-message Function

Description:
Through background man-machine command, SG7000 can generate various pseudo message
sequences. Thus, before cutover of signaling network, this function can be utilized to complete
checking of routing data and GT data of STP equipment.
In maintenance terminal of SG7000, either “Debug pseudo message” or “User pseudo message”
function can be utilized to generate various pseudo messages. Through “Debug pseudo message”,
messages changing according to certain principle can be generated (following items, namely,
message contents, message changing principle, total message transmitting time and message
number generated per second can be set), e.g. generating SCCP message about GT code changing
within certain number segment. Through “User pseudo message” message transmitted by
functional modules such as MTPL2 and MTPL3 can be simulated, and further, message type,
message parameter, total message transmitting time and message number transmitted per second
can be set as well. According to different message types, certain message can be directly generated
in HPU board, or delivered by SYS and the message can be sent to any link by setting different
parameter. For the former, each link can create heavy load message, while for the latter, heavy
load message can only be sent to certain office direction or certain link.
X. SG7000-061001
Function: GT test Function

Description:
This operation is used to test global titles, so as to ensure the correctness of them. This is a useful
to validate the GTT configuration especially when there are a large number of GTT data in the
SG7000. Input the GT in the dialog showed below.
Figure 1-3 Global title test input window
If the system correctly translates the global title, the returned results will contain the global title
length, global title, translation result, destination signaling point code, subsystem number,
matching global title length and matching global title..
Figure 1-4 Global title test output window
XI. SG7000-061101
Function: QoS Measurement

Description:
QoS is an important parameter of broad band. SG7000 provides a measurement function for QoS
and reviews them as graph. QoS is shown by a set of the following items:
z Total number of transmitted messages
z Retransmitted messages number
z Average time interval
z Max message transmission interval
z Min message transmission interval
XII. SG7000-061201
Function: Report System

Description:
Report System provides a flexible interface to get the statistics of SG7000 and shows them as
tables to tell operator SG7000’s status and the signaling network’s status. The items shown are
following:
z Link load statistics of narrowband
z Link load statistics of M3UA and M2PA
z CPU load statistics

z Link set load statistics

z DPC statistics
z Resource statistics
1.7 SG7000-07
Function: Security management
Description:
Flexible authority management:
The BAM authorizes the workstation attempting to access and the subscriber account. Authorities
of a workstation and a subscriber can be configured flexibly, and the minimum allocated authority
is command group. Commands in a command group can be set and combined by subscribers
freely.
Detailed logs:
The BAM records all executed commands and saves as a log for query. The information recorded
includes commands, parameters, execution time, operator, and workstation.
BAM protector:
The BAM protector effectively prevents illegal programs to ensure the security of the BAM.
1.8 SG7000-08
Function: Troubleshooting
Description:
The SG7000 detects faults and generates alarms to notify the NMS. The reported information can
help locate, solve problems, and insulate faulty units. The SG7000 can automatically recover the
faulty parts or insulate them if the faults cannot be removed. Alarm levels can be defined
accordingly.
The SG7000 can manage faults occurred in the following items:
z DPC
z route
z NSL
z HSL (ATM, Q.703)
z SPMC
z SCTP link
z boards
z environment (temperature and humidity)
z AS
z ASP
z Interface (E1/FE)
The SG7000 can manage the following performance:
z Load of CPU
z Load of link
1.9 SG7000-09
Function: Reliability
Description:
1) Reliability solution
2) Reliability indexes
I. SG7000-090101
Function: Reliability solution

Description:
The system adopts distributed processing structure in centralized management mode. The services
are processed on different boards without affecting the services on other boards. Important boards
(such as clock boards, system management board, and broadband interface board) are in 1+1 hot
backup mode.
Link load is controlled at five levels. When the congestion reaches the threshold, the system
discards subsequent messages to avoid overload of the links.
In networking, the SG7000 adopts symmetrical mode. When one SG7000 is faulty, the other
SG7000 takes the protocols (including MTP and M3UA) and the services. Thus, services will not
be interrupted.
II. SG7000-090201
Function: Reliability Indexes

Description:
Table 1-1 lists the reliability indexes of the SG7000.
Table 1-1 Reliability Indexes
Item Index
System availability ≥ 99.99989%
Unavailable time ≤ 0.54 min/yr.
MTBF 87.67 yr.
1.10 SG7000-10
Function: Hardware Structure
Description:
1) Cabinet
2) Frame

I. SG7000-100101
Function: Cabinet
Description:
19-inch N68-22 cabinet (2200 mm × 600 mm × 800 mm) in conformance with the International
Electro technical Commission (IEC) standard is adopted for SG7000. The SG7000 cabinet
supports –48V DC input.
II. SG7000-100201
Function: Frames
Description:
The frame adopts standard structure of 19-inch width and 9U height, which complies with the
IEC297 standard. It features high reliability, high integration, and powerful processing capability.

1.11 SG7000-11
Function: License
Description:
License is a string of characters positively encrypted by a certain tool according to the
authentication content. The unique ID (might be MAC address) of the equipment is to be
authenticated.
The control function of a License file includes two aspects: function control and subscriber display
restriction.
The function control is implemented through the MML Server. When receiving an MML
command, the system reads the License file to judge whether the subscriber has the authority to
execute the command. If the subscriber has no authority, the system returns a prompt indicating a
wrong operation.
Display restriction function is different due to different subscribers. This function is used to
restrict subscribers to execute allowed commands only.
1.12 SG7000-12
Function: Technical standards
Description:
1) Chinese Specifications
2) ITU-T Recommendation
3) IEEE Standard
4) IETF Standard
5) ANSI Standard
6) ETSI Standard
7) PNO-ISC Standard
8) Environment Standard
I. SG7000-120101
Function: Chinese Specifications

Description:
z YD/T 1203-2002 Technical Specifications for Signaling Gateway Equipment
z YD/T 1127-2001 Technical Specifications for interworking of SS7 and IP
z YD/T 1144-2001 National Technical Specification of No.7 Signaling Transfer
Point (STP) Device
z YD/T 1125-2001 Technical Specification of National No.7 Signaling
Mode-2-Mbit/s High Speed Signaling Link
z National Technical Specification of No.7 Signaling Mode-Message Transfer
Part (MTP)
z National Technical Specification of No.7 Signaling Mode-Signaling
Connection Control Part (SCCP)
z National Technical Specification of No.7 Signaling Mode-Transaction

Processing Capability Part (TC)
z National Technical Specification of No.7 Signaling Mode-Operation,
Maintenance and Administration Part (OMAP).
z Message Transfer Part Level 3 User Adaptation Layer (M3UA)
(YD/T1192-2002)
z Message Transfer Part Level 2 Peer-to-Peer Adaptation Layer (M2PA)
(YD/T1191-2002)
z Message Transfer Part Level 2 User Adaptation Layer (M2UA)
z Stream Control Transmission Protocol (SCTP) (YD/T1194-2002)
z General Technical Specifications on SoftSwitch (YDC 003-2001)
z General Technical Specifications on Telephone Switching Equipment by the
Information Industrial Ministry of China (YDN 065-1997)
z Technical Specifications on Intelligent Network Service Control Point (SCP)
of China (YDN 048-1997)
II. SG7000-120102
Function: ITU-T Recommendation

Description:
z CCITT Q.701–Q.709 (07/96) Specifications of Signaling System No.7
-Message transfer part
z ITU-T Q.701–Q.709 (03/96 version or 07/96 version) Specifications of
Signaling System No.7 - Message transfer part (these two versions are for
reference only, and the system only complies with some updated process
definitions).
z ITU-T Q.711–Q.719 (07/96) Specifications of Signaling System No.7 -
Signaling connection control part
z ITU-T Q.770–Q.779 (07/96) Specifications of Signaling System No.7 -
Transaction Capabilities Application Part
z ITU-T Q.750/Q.751/Q.753–Q.759 (07/96) Specifications of Signaling System
No.7 - Signaling System No. 7 management
z ITU-T Q.752 (06/93) Specifications of Signaling System No.7 - Signaling
System No.7 management: MONITORING AND MEASUREMENTS FOR
SIGNALING SYSTEM No. 7 NETWORKS
III. SG7000-120103
Function: IEEE Standard

Description:
z Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access
Method and Physical Layer Specifications (IEEE802.3)
z Logical Link Control (IEEE 802.2)

IV. SG7000-120104
Function: IETF Standard

Description:
z Internet Protocol (RFC0791)
z Architectural Framework for Signaling Transport (RFC 2719)
z Stream Control Transmission Protocol (RFC 2960)
z SS7 MTP3-User Adaptation Layer (RFC3332)
z SS7 MTP2-User Adaptation Layer (RFC3331)
z SS7 MTP2-User Peer-to-Peer Adaptation Layer
V. SG7000-120105
Function: ANSI Standard

Description:
z ANSI T1.111-1996 Signaling System No.7 (SS7)-Message Transfer Part
(MTP)
z ANSI T1.112-1996 Signaling System No.7 (SS7)-Signaling Connection
Control Part (SCCP)
VI. SG7000-120106
Function: ETSI Standard

Description:
z ETS 300 008-1–ETSI MTP
z ETS 300 009-1–ETSI SCCP
z ETSI TS 102 141 V1.1.1 (2003-02)
z Services and Protocols for Advanced Networks (SPAN);
z MTP/SCCP/SSCOP and SIGTRAN (Message of SS7 over IP);
z Message transfer part 2 User Adaptation layer (M2UA)
z ETSI TS 102 142 V1.1.1 (2003-02)
z MTP/SCCP/SSCOP and SIGTRAN (Message of SS7 over IP);
z Message transfer part 3 User Adaptation layer (M3UA)
z ETSI TS 102 144 V1.1.1 (2003-02)
z MTP/SCCP/SSCOP and SIGTRAN (Transport of SS7 over IP);
z Stream Control Transmission Protocol (SCTP)
VII. SG7000-120107
Function: PNO-ISC Standard

Description:
z PNO-ISC Specification Number 005 C7 Interconnect Message Transfer Part
(MTP)

z PNO-ISC Specification Number 003 C7 Interconnect Signaling Connection

Control Part (SCCP)
VIII. SG7000-120108
Function: Environment Standard

Description:
z Bellcore GR-63-CORE, "Network Equipment Building Standard: Physical
Protection," Telcordia Technologies, Morristown, NJ, October 1995.
z ETS 300 019, "Equipment Engineering (EE); Environmental Conditions and
Environmental Tests for Telecommunications Equipment," European Testing
Standards Institute, Sophia Antipolis, France, 1994.
z GR-3028-CORE Thermal Management in Telecommunications Central
Offices, Telcordia Technologies Generic Requirements, Issue 1, November
2001, Telcordia Technologies, Inc., Piscataway, N.J.
1.13 SG7000-13
Function: Interconnection list
Description:
Number Entity Suppliers of Type/Version Operator
Core Network
1 MSC Alcatel S12 J-CLM8, S12 J-CLM7.2 Chine Mobile and

China Unicom
Motorola /
Siemens SR9.0, SR8.0 Chine Mobile and

China Unicom
Nokia DX200-M10, DX200-M11 Chine Mobile and

China Unicom
Ericsson APZ 212 33-R8, APZ 212 33-R9 Chine Mobile and
China Unicom
Huawei MSC33, MSC60 Chine Mobile and

China Unicom
Beijing GSM15, GSM16

Telecom
2 HLR Ericsson APZ 212 33-R8, APZ 212 33-R9 Chine Mobile and
China Unicom
Siemens SR9.0, SR8.0 Chine Mobile and


Core Network
China Unicom
Alcatel A8360-G9 Chine Mobile and

China Unicom
Huawei G3HLR36 Chine Mobile and

China Unicom
Nokia DX200-M10, DX200-M11 Chine Mobile and

China Unicom
HP /
Beijing GSM15, GSM16

Telecom
3 IN Siemens /
Huawei WINV200R002, WINV200R003 Chine Mobile, China

Unicom, and Thailand
AIS
Alcatel(S1240) COMPAQ ES45-Release 2.3.08 Chine Mobile
Nokia /
Ericsson /
4 VMS Technomen /
5 SMS Logica /
Comptel /
Lucent /
Nokia SC5BCD3 Chine Mobile
Ericsson /
Huawei V3.0, V2.8 Chine Mobile and

China Unicom
6 GPRS Ericsson /


Core Network
Huawei SGSNV800R002, Chine Mobile

SGSNV800R003
Motorola CSGSN-170090 Chine Mobile
Nokia SG3.0-ECD4 Chine Mobile
Siemens /
Alcatel /
7 Location Siemens /
Base
Huawei GMLC V100, LCSGV100 Chine Mobile and
Services
China Unicom

sg7000 v200r005 Function Descriptions

Uploaded by

Copyright:

Available Formats

sg7000 v200r005 Function Descriptions

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

sg7000 v200r005 Function Descriptions

Uploaded by

Copyright:

Available Formats

SG7000V200R005 Function Descriptions

Huawei Technologies Co., Ltd

September 15, 2009

Trademarks and Permissions

Huawei Technologies Co., Ltd.

Date Revised Description Author

2008-7-23 V1.00 Inherit from V2R3 v1.20 SG7000 marketing

Modify performance index. Add signaling technical support team

replication function, BICC transfer function.

SG7000V200 Function Description

Max. number of links (64-kbit/s) 12,096

Max. number of links (2-Mbit/s) 756

Max. number of destination signaling points 2,048

Max. number of narrowband signaling link sets 2,048

Max. number of narrowband signaling routes 4,096

Max. number of AS 1,024

Max. number of SCTP associations 5,120

Max. number of ASP 5,120

Max. number of SPMC (SG in STP mode) 1,024

Max. number of local signaling points supported 256

2009-9-15 HUAWEI CONFIDENTIAL Page 5 of 37

Max. load over 64-kbit/s signaling link 0.99Erl

Max. load over 2-Mbit/s signaling link 0.95Erl

Max. load over 1.544-Mbit/s signaling link 0.95Erl

Message transfer delay 3–15ms

Max message processing capability 4920K MSU/s

Max GTT capability 2800K GTT/s

GTT capability of 64-kbit/s signaling link 80GTT/s

GTT capability of 2-Mbit/s signaling link 2356GTT/s

Max SIGTRAN processing capability (each of 10000 Packet/s

Function: Capacity and cascading capability

Function: STP, constructing signaling network

Function: SG, constructing NGN

Function: IP STP, constructing 3G and IP signaling networks

2009-9-15 HUAWEI CONFIDENTIAL Page 7 of 37

Function: Signaling System No.7

2009-9-15 HUAWEI CONFIDENTIAL Page 8 of 37

Function: SS7 over IP

Function: Multiple Signaling Point Codes

Function: MTP Load Sharing

Function: SCCP Load Sharing

Function: Enhanced Multi-point Code Load Sharing

z Multi-route dynamic load sharing between multiple signaling points

Function: Multiple Logical Networks

Function: Semi-permanent connection

Function: Voice channel connection

Function: Test connection

Function: OMAP-MRVT- MTP route verification test

Function: OMAP-SRVT SCCP route verification test

Function: Traffic Congestion Control Function (link monitoring)

Function: 2M High Speed Signaling Link Function

Q.703 64K/2M Link ATM 2M Link

2009-9-15 HUAWEI CONFIDENTIAL Page 13 of 37

Figure 1-1 HSL protocol stack

Function: MTP & SCCP Loop Detected

Function: BICC transfer function

14) IN SMS Bypass

Function: Signaling Screen

Function: IUA convergence