15.

Detailed Notes
UNIT –I
Attacks on Computers and Computer Security: Introduction, The need of Security,
Security approaches, Principles of Security, Types of Security Attacks, Security Services,
Security Mechanisms, A model for Network Security.
Cryptography: Concepts and Techniques: Introduction, Plain text and Cipher Text,
Substitution Techniques, Transposition Techniques, Encryption and Decryption, Symmetric
and Asymmetric Cryptography, Steganography, Key Range and Key Size, Possible types of
Attacks.

Introduction:
This is the age of universal electronic connectivity, where the activities like
hacking, viruses, electronic fraud are very common. Unless security measures are taken,
a network conversation or a distributed application can be compromised easily.

Some simple examples are:

Online purchases using a credit/debit card.
A customer unknowingly being directed to a false website.
A hacker sending a message to a person pretending to be someone else.

Network Security has been affected by two major developments over the last
several decades. First one is introduction of computers into organizations and the second
one being introduction of distributed systems and the use of networks and
communication facilities for carrying data between users & computers. These two
developments lead to ‘computer security’ and ‘network security’, where the computer
security deals with collection of tools designed to protect data and to thwart hackers.
Network security measures are needed to protect data during transmission. But keep in
mind that, it is the information and our ability to access that information that we are
really trying to protect and not the computers and networks.

Why We Need Information Security?

Because there are threats
Threats
A threat is an object, person, or other entity that represents a constant danger to an asset
28
The 2007 CSI survey
 494 computer security practitioners
 46% suffered security incidents
 29% reported to law enforcement
 Average annual loss $350,424
 1/5 suffered ‗targeted attack‘
 The source of the greatest financial losses?
 Most prevalent security problem
 Insider abuse of network access
 Email
Threat Categories
 Acts of human error or failure
 Compromises to intellectual property
 Deliberate acts of espionage or trespass
 Deliberate acts of information extortion
 Deliberate acts of sabotage or vandalism
 Deliberate acts of theft
 Deliberate software attack
 Forces of nature
 Deviations in quality of service
 Technical hardware failures or errors
 Technical software failures or errors
 Technological obsolesce

Definitions
 Computer Security - generic name for the collection of tools designed to protect
data and to thwart hackers

 Network Security - measures to protect data during their transmission

 Internet Security - measures to protect data during their transmission over a

collection of interconnected networks

 our focus is on Internet Security

29
  which consists of measures to deter, prevent, detect, and correct security
violations that involve the transmission & storage of information

ASPECTS OF SECURITY
 consider 3 aspects of information security:

 Security Attack

 Security Mechanism

 Security Service

SECURITY ATTACK
 any action that compromises the security of information owned by an
organization

 information security is about how to prevent attacks, or failing that, to detect

attacks on information-based systems

 often threat & attack used to mean same thing

 have a wide range of attacks

 can focus of generic types of attacks

 Passive
 Active

30
Passive Attack

Active Attack

INTERRUPTION
An asset of the system is destroyed or becomes unavailable or unusable. It is an
attack on availability.
Examples:

Destruction of some hardware

Jamming wireless signals

Disabling file management systems
INTERCEPTION
An unauthorized party gains access to an asset. Attack on confidentiality.

Examples:

Wire tapping to capture data in a network.

Illicitly copying data or programs

Eavesdropping
MODIFICATION
31
 When an unauthorized party gains access and tampers an asset. Attack is on
Integrity.
Examples:

Changing data file
 Altering a program and the contents of a message

FABRICATION
An unauthorized party inserts a counterfeit object into the system. Attack on
Authenticity. Also called impersonation

Examples:

Hackers gaining access to a personal email and sending message

Insertion of records in data files

Insertion of spurious messages in a network

SECURITY SERVICES
It is a processing or communication service that is provided by a system to give a
specific kind of production to system resources. Security services implement security
policies and are implemented by security mechanisms.
Confidentiality

Confidentiality is the protection of transmitted data from passive attacks. It is used

to prevent the disclosure of information to unauthorized individuals or systems. It has
been defined as “ensuring that information is accessible only to those authorized to have
access”.
32
The other aspect of confidentiality is the protection of traffic flow from analysis. Ex: A
credit card number has to be secured during online transaction.

Authentication
This service assures that a communication is authentic. For a single message
transmission, its function is to assure the recipient that the message is from intended
source. For an ongoing interaction two aspects are involved. First, during connection
initiation the service assures the authenticity of both parties. Second, the connection
between the two hosts is not interfered allowing a third party to masquerade as one of
the two parties. Two specific authentication services defines in X.800 are

Peer entity authentication: Verifies the identities of the peer entities involved in
communication. Provides use at time of connection establishment and during data
transmission. Provides confidence against a masquerade or a replay attack
Data origin authentication: Assumes the authenticity of source of data unit, but does
not provide protection against duplication or modification of data units. Supports
applications like electronic mail, where no prior interactions take place between
communicating entities.
Integrity
Integrity means that data cannot be modified without authorization. Like
confidentiality, it can be applied to a stream of messages, a single message or selected
fields within a message. Two types of integrity services are available. They are
Connection-Oriented Integrity Service: This service deals with a stream of
messages, assures that messages are received as sent, with no duplication, insertion,
modification, reordering or replays. Destruction of data is also covered here. Hence, it
attends to both message stream modification and denial of service.
Connectionless-Oriented Integrity Service: It deals with individual messages
regardless of larger context, providing protection against message modification only.

An integrity service can be applied with or without recovery. Because it is related

to active attacks, major concern will be detection rather than prevention. If a violation is

33
detected and the service reports it, either human intervention or automated recovery
machines are required to recover.
Non-repudiation
Non-repudiation prevents either sender or receiver from denying a transmitted
message. This capability is crucial to e-commerce. Without it an individual or entity can
deny that he, she or it is responsible for a transaction, therefore not financially liable.
Access Control
This refers to the ability to control the level of access that individuals or entities
have to a network or system and how much information they can receive. It is the ability
to limit and control the access to host systems and applications via communication links.
For this, each entity trying to gain access must first be identified or authenticated, so that
access rights can be tailored to the individuals.
Availability
It is defined to be the property of a system or a system resource being accessible
and usable upon demand by an authorized system entity. The availability can significantly
be affected by a variety of attacks, some amenable to automated counter measures i.e
authentication and encryption and others need some sort of physical action to prevent or
recover from loss of availability of elements of a distributed system.

SECURITY MECHANISMS
According to X.800, the security mechanisms are divided into those implemented
in a specific protocol layer and those that are not specific to any particular protocol layer
or security service. X.800 also differentiates reversible & irreversible encipherment
mechanisms. A reversible encipherment mechanism is simply an encryption algorithm
that allows data to be encrypted and subsequently decrypted, whereas irreversible
encipherment include hash algorithms and message authentication codes used in digital
signature and message authentication applications
Specific Security Mechanisms
Incorporated into the appropriate protocol layer in order to provide some of the
OSI security services,
Encipherment: It refers to the process of applying mathematical algorithms for
converting data into a form that is not intelligible. This depends on algorithm used and

34
encryption keys.
Digital Signature: The appended data or a cryptographic transformation applied to any
data unit allowing to prove the source and integrity of the data unit and protect against
forgery.
Access Control: A variety of techniques used for enforcing access permissions to the
system resources.
Data Integrity: A variety of mechanisms used to assure the integrity of a data unit or
stream of data units.
Authentication Exchange: A mechanism intended to ensure the identity of an entity by
means of information exchange.
Traffic Padding: The insertion of bits into gaps in a data stream to frustrate traffic
analysis attempts.
Routing Control: Enables selection of particular physically secure routes for certain data
and allows routing changes once a breach of security is suspected.
Notarization: The use of a trusted third party to assure certain properties of a data
exchange
Pervasive Security Mechanisms
These are not specific to any particular OSI security service or protocol layer.
Trusted Functionality: That which is perceived to b correct with respect to some criteria
Security Level: The marking bound to a resource (which may be a data unit) that names
or designates the security attributes of that resource.
Event Detection: It is the process of detecting all the events related to network security.
Security Audit Trail: Data collected and potentially used to facilitate a security audit,
which is an independent review and examination of system records and activities.
Security Recovery: It deals with requests from mechanisms, such as event handling and
management functions, and takes recovery actions.

35
MODEL FOR NETWORK SECURITY

Data is transmitted over network between two communicating parties, who must
cooperate for the exchange to take place. A logical information channel is established by
defining a route through the internet from source to destination by use of communication
protocols by the two parties. Whenever an opponent presents a threat to confidentiality,
authenticity of information, security aspects come into play. Two components are present
in almost all the security providing techniques.
A security-related transformation on the information to be sent making it unreadable
36
by the opponent, and the addition of a code based on the contents of the message, used to
verify the identity of sender.
Some secret information shared by the two principals and, it is hoped, unknown to
the opponent. An example is an encryption key used in conjunction with the transformation
to scramble the message before transmission and unscramble it on reception
A trusted third party may be needed to achieve secure transmission. It is
responsible for distributing the secret information to the two parties, while keeping it
away from any opponent. It also may be needed to settle disputes between the two parties
regarding authenticity of a message transmission. The general model shows that there
are four basic tasks in designing a particular security service:
1. Design an algorithm for performing the security-related transformation. The
algorithm should be such that an opponent cannot defeat its purpose
2. Generate the secret information to be used with the algorithm
3. Develop methods for the distribution and sharing of the secret information
4. Specify a protocol to be used by the two principals that makes use of the security
algorithm and the secret information to achieve a particular security service
Various other threats to information system like unwanted access still exist. The
existence of hackers attempting to penetrate systems accessible over a network remains
a concern. Another threat is placement of some logic in computer system affecting various
applications and utility programs. This inserted code presents two kinds of threats.
Information access threats intercept or modify data on behalf of users who should
not have access to that data
Service threats exploit service flaws in computers to inhibit use by legitimate users
Viruses and worms are two examples of software attacks inserted into the system by
means of a disk or also across the network. The security mechanisms needed to cope with
unwanted access fall into two broad categories.

Some basic terminologies used

 CIPHER TEXT - the coded message

 CIPHER - algorithm for transforming plaintext to ciphertext

 KEY - info used in cipher known only to sender/receiver

 ENCIPHER (ENCRYPT) - converting plaintext to ciphertext

37
  DECIPHER (DECRYPT) - recovering ciphertext from plaintext

 CRYPTOGRAPHY - study of encryption principles/methods

 CRYPTANALYSIS (CODEBREAKING) - the study of principles/ methods of deciphering

ciphertext without knowing key

 CRYPTOLOGY - the field of both cryptography and cryptanalysis

CRYPTOGRAPHY
Cryptographic systems are generally classified along 3 independent dimensions:
Type of operations used for transforming plain text to cipher text
All the encryption algorithms are abased on two general principles: substitution,
in which each element in the plaintext is mapped into another element, and
transposition, in which elements in the plaintext are rearranged.
The number of keys used
If the sender and receiver uses same key then it is said to be symmetric key (or)
single key (or) conventional encryption. If the sender and receiver use different keys
then it is said to be public key encryption.
The way in which the plain text is processed
A block cipher processes the input and block of elements at a time, producing
output block for each input block. A stream cipher processes the input elements
continuously, producing output element one at a time, as it goes along.

CRYPTANALYSIS
The process of attempting to discover X or K or both is known as cryptanalysis. The
strategy used by the cryptanalysis depends on the nature of the encryption scheme and the
information available to the cryptanalyst. There are various types of cryptanalytic attacks
based on the amount of information known to the cryptanalyst.
Cipher text only – A copy of cipher text alone is known to the cryptanalyst.

Known plaintext – The cryptanalyst has a copy of the cipher text and the corresponding
plaintext.

38
Chosen plaintext – The cryptanalysts gains temporary access to the encryption machine.
They cannot open it to find the key, however; they can encrypt a large number of suitably
chosen plaintexts and try to use the resulting cipher texts to deduce the key.
Chosen cipher text – The cryptanalyst obtains temporary access to the decryption machine,
uses it to decrypt several string of symbols, and tries to use the results to deduce the key.

CLASSICAL ENCRYPTION TECHNIQUES

There are two basic building blocks of all encryption techniques: substitution and
transposition.

SUBSTITUTION TECHNIQUES
A substitution technique is one in which the letters of plaintext are replaced by other
letters or by numbers or symbols. If the plaintext is viewed as a sequence of bits, then
substitution involves replacing plaintext bit patterns with cipher text bit patterns.
CAESAR CIPHER
The earliest known use of a substitution cipher and the simplest was by Julius
Caesar. The Caesar cipher involves replacing each letter of the alphabet with the letter
standing 3 places further down the alphabet. e.g., plain text : pay more money
Cipher text: SDB PRUH PRQHB
Note that the alphabet is wrapped around,
so that letter following „z‟ is „a‟.
For each plaintext letter p, substitute the cipher text letter c
such that C = E(p) = (p+3) mod 26
A shift may be any amount, so that general Caesar algorithm is C = E (p) = (p+k) mod 26
Where k takes on a value in the range 1 to 25.
The decryption algorithm is simply P = D(C) = (C-k) mod 26
MONOALPHABETIC CIPHERS
Here, Plaintext characters are substituted by a different alphabet stream of
characters shifted to the right or left by n positions. When compared to the Caesar
ciphers, these monoalphabetic ciphers are more secure as each letter of the ciphertext
can be any permutation of the 26 alphabetic characters leading to 26! or greater than 4 x
1026 possible keys. But it is still vulnerable to cryptanalysis, when a cryptanalyst is aware
of the nature of the plaintext, he can find the regularities of the language. To overcome
39
these attacks, multiple substitutions for a single letter are used. For example, a letter can
be substituted by different numerical cipher symbols such as 17, 54, 69….. etc. Even this
method is not completely secure as each letter in the plain text affects on letter in the
ciphertext.
Or, using a common key which substitutes every letter of the plain text.
The key ABCDEFGHIIJ KLMNOPQRSTUVWXYZ
QWERTYUIIOPAS DFGHJ KLZXCV BNM
Would encrypt the message
II think therefore II am
into
OZIIOFAZIITKTYGKTOQD
But any attacker would simply break the cipher by using frequency analysis by observing
the number of times each letter occurs in the cipher text and then looking upon the
English letter frequency table. So, substitution cipher is completely ruined by these
attacks. Monoalphabetic ciphers are easy to break as they reflect the frequency of the
original alphabet. A countermeasure is to provide substitutes, known as homophones for
a single letter.

PLAYFAIR CIPHERS
It is the best known multiple –letter encryption cipher which treats digrams in the
plaintext as single units and translates these units into ciphertext digrams. The Playfair
Cipher is a digram substitution cipher offering a relatively weak method of encryption. It
was used for tactical purposes by British forces in the Second Boer War and in World War
I and for the same purpose by the Australians and Germans during World War II. This
was because Playfair is reasonably fast to use and requires no special equipment. A
typical scenario for Playfair use would be to protect important but non-critical secrets
during actual combat. By the time the enemy cryptanalysts could break the message, the
information was useless to them. It is based around a 5x5 matrix, a copy of which is held
by both communicating parties, into which 25 of the 26 letters of the alphabet (normally
either j and i are represented by the same letter or x is ignored) are placed in a random
fashion. For example, the plain text is Shi Sherry loves Heath Ledger and the agreed key is
sherry. The matrix will be built according to the following rules.
 in pairs,
40
  without punctuation,
 All Js are replaced with Is.

SH IS HE RR YL OV ES HE AT HL ED GE R
 Double letters which occur in a pair must be divided by an X or a Z.
 E.g. LI TE RA LL Y LI TE RA LX LY

SH IS HE RX RY LO VE SH EA TH LE DG ER The alphabet square is prepared using, a 5*5

matrix, no repetition letters, no Js and key is written first followed by the remaining
alphabets with no i and j.

SHERY
ABCDF
GIKLM
NOPQT
UVWXZ
For the generation of cipher text, there are three rules to be followed by each pair of
letters.

letters appear on the same row： replace them with the letters to their immediate right
respectively
letters appear on the same column： replace them with the letters immediately below
respectively
not on the same row or column： replace them with the letters on the same row

respectively but at the other pair of corners of the rectangle defined by the original pair.
Based on the above three rules, the cipher text obtained for the given plain text is
HE GH ER DR YS IQ WH HE SC OY KR AL RY
Another example which is simpler than the above one can be given as:
Here, key word is playfair. Plaintext is Hellothere hellothere becomes-----he lx lo th er ex .
Applying the rules again, for each pair, If they are in the same row, replace each with the
letter to its right (mod 5)
he KG
If they are in the same column, replace each with the letter below it (mod 5)

41
lo RV
Otherwise, replace each with letter we’d get if we swapped their column indices
lx YV
So the cipher text for the given plain text is KG YV RV QM GI KU

To decrypt the message, just reverse the process. Shift up and left instead of down and
right. Drop extra x’s and locate any missing I’s that should be j’s. The message will be back
into the original readable form. no longer used by military forces because of the advent
of digital encryption devices. Playfair is now regarded as insecure for any purpose
because modern hand-held computers could easily break the cipher within seconds.
HILL CIPHER
It is also a multi letter encryption cipher. It involves substitution of ‘m’ ciphertext
letters for ‘m’ successive plaintext letters. For substitution purposes using ‘m’ linear
equations, each of the characters are assigned a numerical values i.e. a=0, b=1, c=2,
d=3,…….z=25. For example if m=3, the system can be defined as: c1 = (k11p1 + k12p2 +
k13p3) mod 26 c2 = (k21p1 + k22p2 + k23p3) mod 26 c3 = (k31p1 + k32p2 + k33p3) mod 26
If we represent in matrix form, the above statements as matrices and column vectors:

Thus, C = KP mod26, where C= Column vectors of length 3 P = Column vectors of length 3 K

= 3x3 encryption key matrix. For decryption process, inverse of matrix K i.e. K-1 is required
which is defined by the equation KK-1 = K-1K = I, where I is the identity matrix that contains
only 0’s and 1’s as its elements. Plaintext is recovered by applying K-1 to the cipher text. It is
expressed as C = EK(P) = KP mod26 P = DK(C) = K-1C mod26. = K-1KP = IP = P
Example: The plain text is I can’t do it and the size of m is 3 and key K is chosen as following

42
The main advantages of hill cipher are given below:
It perfectly hides single-letter frequencies.

Use of 3x3 Hill ciphers can perfectly hide both the single letter and two-letter
frequency information.

Strong enough against the attacks made only on the cipher text.
But, it still can be easily broken if the attack is through a known plaintext.
43
POLYALPHABETIC CIPHERS
In order to make substitution ciphers more secure, more than one alphabet can be used.
Such ciphers are called polyalphabetic, which means that the same letter of a message
can be represented by different letters when encoded. Such a one-to-many
correspondence makes the use of frequency analysis much more difficult in order to crack
the code. We describe one such cipher named for Blaise de Vigenere a 16-th century
Frenchman. The Vigenere cipher is a polyalphabetic cipher based on using successively
shifted alphabets, a different shifted alphabet for each of the 26 English letters. The
procedure is based on the tableau shown below and the use of a keyword. The letters of
the keyword determine the shifted alphabets used in the encoding process.

For the message COMPUTING GIVES INSIGHT and keyword LUCKY we proceed by
repeating the keyword as many times as needed above the message, as follows.

44
Encryption is simple: Given a key letter x and a plaintext letter y, the ciphertext letter is
at the intersection of the row labeled x and the column labeled y; so for L, the ciphertext
letter would be N. So, the ciphertext for the given plaintext would be given as:

Decryption is equally simple: The key letter again identifies the row and position
of ciphertext letter in that row decides the column and the plaintext letter is at the top of
that column. The strength of this cipher is that there are multiple ciphetext letters for
each plaintext letter, one for each unique letter of the keyword and thereby making the
letter frequency information is obscured. Still, breaking this cipher has been made
possible because this reveals some mathematical principles that apply in cryptanalysis.
To overcome the drawback of the periodic nature of the keyword, a new technique is
proposed which is referred as an autokey system, in which a key word is concatenated
with the plaintext itself to provide a running key. For ex In the above example, the key
would be luckycomputinggivesin Still, this scheme is vulnerable to cryptanalysis as both
the key and plaintext share the same frequency distribution of letters allowing a
statistical technique to be applied. Thus, the ultimate defense against such a cryptanalysis
is to choose a keyword that is as long as plaintext and has no statistical relationship to it.
A new system which works on binary data rather than letters is given as
Ci = pi ki where, pi = ith binary digit of plaintext ki = ith binary digit of key Ci= ith binary
digit of ciphertext
= exclusive-or operation. Because of the properties of XOR, decryption is done by
performing the same bitwise operation.
pi = Ci ki A very long but, repeation key word is used making cryptanalysis difficult.

TRANSPOSITION TECHNIQUES

All the techniques examined so far involve the substitution of a cipher text symbol for a
plaintext symbol. A very different kind of mapping is achieved by performing some sort
of permutation on the plaintext letters. This technique is referred to as a transposition
cipher.

45
Rail fence is simplest of such cipher, in which the plaintext is written down as a sequence
of diagonals and then read off as a sequence of rows.

Plaintext = meet at the school house

To encipher this message with a rail fence of depth 2,

We write the message as follows: m e a t e c o l o s e t t h s h o h u e

The encrypted message is MEATECOLOSETTHSHOHUE

Row Transposition Ciphers-A more complex scheme is to write the message in a

rectangle, row by row, and read the message off, column by column, but permute the
order of the columns. The order of columns then becomes the key of the algorithm.

e.g., plaintext = meet at the school house

Key = 4 3 1 2 5 6 7

PT = m e e t a t t h e s c h o o l h o u s e

CT = ESOTCUEEHMHLAHSTOETO

A pure transposition cipher is easily recognized because it has the same letter frequencies
as the original plaintext. The transposition cipher can be made significantly more secure
by performing more than one stage of transposition. The result is more complex
permutation that is not easily reconstructed.

STEGANOGRAPHY
A plaintext message may be hidden in any one of the two ways. The methods of
steganography conceal the existence of the message, whereas the methods of
cryptography render the message unintelligible to outsiders by various transformations
of the text. A simple form of steganography, but one that is time consuming to construct
is one in which an arrangement of words or letters within an apparently innocuous text
spells out the real message. e.g., (i) the sequence of first letters of each word of the overall
message spells out the real (hidden) message. (ii) Subset of the words of the overall
message is used to convey the hidden message. Various other techniques have been used
historically, some of them are

46
  Character marking – selected letters of printed or typewritten text are
overwritten in pencil. The marks are ordinarily not visible unless the paper is held
to an angle to bright light.
 Invisible ink – a number of substances can be used for writing but leave no visible
trace until heat or some chemical is applied to the paper.
 Pin punctures – small pin punctures on selected letters are ordinarily not visible
unless the paper is held in front of the light.
 Typewritten correction ribbon – used between the lines typed with a black
ribbon, the results of typing with the correction tape are visible only under a
strong light.

Drawbacks of Steganography
 Requires a lot of overhead to hide a relatively few bits of information.
 Once the system is discovered, it becomes virtually worthless.

47
 UNIT –2
Symmetric Key Ciphers: Block Cipher Principles and Algorithms (DES, AES, and Blowfish),
Differential and Linear Cryptanalysis, Block Cipher Modes of Operations, Stream Ciphers,
RC4, Location and Placement of encryption function, Key Distribution.
Asymmetric Key Ciphers: Principles of Public Key Cryptosystems, Algorithms (RSA, Diffie-
Hellman, ECC), Key Distribution.

CONVENTIONAL ENCRYPTION PRINCIPLES

A Conventional/Symmetric encryption scheme has five ingredients

1. Plain Text: This is the original message or data which is fed into the algorithm as input.

2. Encryption Algorithm: This encryption algorithm performs various substitutions and

transformations on the plain text.

3. Secret Key: The key is another input to the algorithm. The substitutions and
transformations performed by algorithm depend on the key.

4. Cipher Text: This is the scrambled (unreadable) message which is output of the encryption
algorithm. This cipher text is dependent on plaintext and secret key. For a given plaintext,
two different keys produce two different cipher texts.

5. Decryption Algorithm: This is the reverse of encryption algorithm. It takes the cipher text
and secret key as inputs and outputs the plain text.

48
The important point is that the security of conventional encryption depends on the secrecy

of the key, not the secrecy of the algorithm i.e. it is not necessary to keep the algorithm

secret, but only the key is to be kept secret. This feature that algorithm need not be kept

secret made it feasible for wide spread use and enabled manufacturers develop low cost

chip implementation of data encryption algorithms. With the use of conventional algorithm,

the principal security problem is maintaining the secrecy of the key.

FEISTEL CIPHER STRUCTURE

The input to the encryption algorithm are a plaintext block of length 2w bits and
a key K. the plaintext block is divided into two halves L0 and R0. The two halves of the
data pass through „n‟ rounds of processing and then combine to produce the ciphertext
block. Each round „i‟ has inputs Li-1 and Ri-1, derived from the previous round, as well as
the subkey Ki, derived from the overall key K. in general, the subkeys Ki are different from
K and from each other.
All rounds have the same structure. A substitution is performed on the left half of
the data (as similar to S-DES). This is done by applying a round function F to the right half
49
of the data and then taking the XOR of the output of that function and the left half of the
data. The round function has the same general structure for each round but is
parameterized by the round subkey ki. Following this substitution, a permutation is
performed that consists of the interchange of the two halves of the data. This structure is
a particular form of the substitution-permutation network. The exact realization of a
Feistel network depends on the choice of the following parameters and design features:
 Block size - Increasing size improves security, but slows cipher
 Key size - Increasing size improves security, makes exhaustive key searching
harder, but may slow cipher
 Number of rounds - Increasing number improves security, but slows cipher
 Subkey generation - Greater complexity can make analysis harder, but slows
cipher
 Round function - Greater complexity can make analysis harder, but slows cipher
 Fast software en/decryption & ease of analysis - are more recent concerns for
practical use and testing

50
The process of decryption is essentially the same as the encryption process. The rule is

as follows: use the cipher text as input to the algorithm, but use the subkey ki in reverse

order. i.e., kn in the first round, kn-1 in second round and so on. For clarity, we use the

notation LEi and REi for data traveling through the decryption algorithm. The diagram

below indicates that, at each round, the intermediate value of the decryption process is

same (equal) to the corresponding value of the encryption process with two halves of the

value swapped.

51
i.e., REi || LEi (or) equivalently RD16-i || LD16-i

After the last iteration of the encryption process, the two halves of the output are

swapped, so that the cipher text is RE16 || LE16. The output of that round is the cipher text.

Now take the cipher text and use it as input to the same algorithm. The input to the first

round is RE16 || LE16, which is equal to the 32-bit swap of the output of the sixteenth round

of the encryption process. Now we will see how the output of the first round of the

decryption process is equal to a 32-bit swap of the input to the sixteenth round of the

encryption process.

First consider the encryption process,

LE16 = RE15

RE16 = LE15(+) F (RE15, K16)

On the decryption side, LD1 =RD0 = LE16 =RE15

RD1 = LD0 (+) F (RD0, K16)

= RE16 F (RE15, K16)

= [LE15 F (RE15, K16)] F (RE15, K16)

= LE15

Therefore, LD1 = RE15 RD1 = LE15 In general, for the ith iteration of the encryption

algorithm, LEi = REi-1 REi = LEi-1 F (REi-1, Ki)

Finally, the output of the last round of the decryption process is RE0 || LE0. A 32-bit swap

recovers the original plaintext.

52
DEFINITIONS

Encryption: Converting a text into code or cipher.

Converting computer data and messages into something, incomprehensible use a key,

so that only a holder of the matching key can reconvert them.

Conventional or Symmetric or Secret Key or Single Key encryption:

Uses the same key for encryption & decryption.

Public Key encryption: Uses different keys for encryption & decryption

Conventional Encryption Principles

 An encryption scheme has five ingredients:

1. Plaintext – Original message or data.

2. Encryption algorithm – performs substitutions & transformations on plaintext.

3. Secret Key – exact substitutions & transformations depend on this

4. Ciphertext - output ie scrambled input.

5. Decryption algorithm - converts ciphertext back to plaintext.

SIMPLIFIED DATA ENCRYPTION STANDARD (S-DES)

53
 The figure above illustrates the overall structure of the simplified DES. The S-DES
encryption algorithm takes an 8-bit block of plaintext (example: 10111101) and a 10-bit
key as input and produces an 8-bit block of ciphertext as output. The S-DES decryption
algorithm takes an 8-bit block of ciphertext and the same 10-bit key used to produce that
ciphertext as input and produces the original 8-bit block of plaintext.

The encryption algorithm involves five functions:

 an initial permutation (IP)

 a complex function labeled fk, which involves both permutation and substitution
operations and depends on a key input

 a simple permutation function that switches (SW) the two halves of the data

 the function fk again

 a permutation function that is the inverse of the initial permutation

The function fk takes as input not only the data passing through the encryption algorithm,
but also an 8-bit key. Here a 10-bit key is used from which two 8-bit subkeys are
generated. The key is first subjected to a permutation (P10). Then a shift operation is
performed. The output of the shift operation then passes through a permutation function
that produces an 8-bit output (P8) for the first subkey (K1). The output of the shift
operation also feeds into another shift and another instance of P8 to produce the second
subkey (K2).
The encryption algorithm can be expressed as a composition composition1 of functions:
IP-1 ο fK2 ο SW ο fk1 ο IP
Which can also be written as
Ciphertext = IP-1 (fK2 (SW (fk1 (IP (plaintext)))))
Where
K1 = P8 (Shift (P10 (Key)))
K2 = P8 (Shift (shift (P10 (Key))))
Decryption can be shown as
Plaintext = IP-1 (fK1 (SW (fk2 (IP (ciphertext)))))

54
 S-DES depends on the use of a 10-bit key shared between sender and receiver.
From this key, two 8-bit subkeys are produced for use in particular stages of the
encryption and decryption algorithm. First, permute the key in the following fashion.
Let the 10-bit key be designated as (k1, K2, k3, k4, k5, k6, k7, k8, k9, k10).
Then the permutation P10 is defined as:
P10 (k1, K2, k3, k4, k5, k6, k7, k8, k9, k10) = (k3, k5, K2, k7, k4, k10 10, k1, k9, k8, k6) P10
can be concisely defined by the display:
P10
3 5 2 7 4 10 1 9 8 6

This table is read from left to right; each position in the table gives the identity of the
input bit that produces the output bit in that position. So the first output bit is bit 3 of the
input; the second output bit is bit 5 of the input, and so on. For example, the key
(1010000010) is permuted to (10000 01100). Next, perform a circular left shift (LS-1),
or rotation, separately on the first five bits and the second five bits. In our example, the
result is (00001 11000). Next we apply P8, which picks out and permutes 8 of the 10 bits
according to the following rule:
P8
6 3 7 4 8 5 10 9

55
The result is subkey 1 (K1). In our example, this yields (10100100). We then go back to
the pair of 5-bit strings produced by the two LS-1 functions and performs a circular left
shift of 2 bit positions on each string. In our example, the value (00001 11000) becomes
(00100 00011). Finally, P8 is applied again to produce K2. In our example, the result is
(01000011).

S-DES encryption
Encryption involves the sequential application of five functions.
Initial and Final Permutations The input to the algorithm is an 8-bit block of plaintext,
which we first permute using the IP function:
IP
2 6 3 1 4 8 5 7
This retains all 8 bits of the plaintext but mixes them up.
Consider the plaintext to be 11110011.
Permuted output = 10111101
At the end of the algorithm, the inverse permutation is used:
IP –1
4 1 3 5 7 2 8 6

The Function fk
The most complex component of S-DES is the function fk, which consists of a combination
of permutation and substitution functions. The functions can be expressed as follows. Let
L and R be the leftmost 4 bits and rightmost 4 bits of the 8-bit input to f K, and let F be a
mapping (not necessarily one to one) from 4-bit strings to 4-bit strings.
Then we let fk(L, R) = ( L (+) F( R, SK), R)
Where SK is a subkey and (+) is the bit-by-bit exclusive-OR function.
e.g., permuted output = 1011 1101 and suppose F (1101, SK) = (1110) for some key SK.
Then f K(10111101) = 10111110, 1101 = 01011101
We now describe the mapping F. The input is a 4-bit number (n1 n2 n3 n4). The first
operation is an expansion/permutation operation:

E/P
4 1 2 3 2 3 4 1

56
R= 1101 E/P output = 11101011 It is clearer to depict the result in this fashion:

The 8-bit subkey K1 = (k11, k12 12, k13 13, k14 14, k15 15, k16 16, k17 17, k18) is added
to this value using exclusive-OR:

Let us rename these 8 bits:

The first 4 bits (first row of the preceding matrix) are fed into the S-box S0 to produce a 2- bit
output, and the remaining 4 bits (second row) are fed into S1 to produce another 2- bit
output.
These two boxes are defined as follows:

The S-boxes operate as follows. The first and fourth input bits are treated as a 2-bit
number that specify a row of the S-box, and the second and third input bits specify a
column of the S-box. The entry in that row and column, in base 2, is the 2-bit output. For
example, if (p0,0 p0,3) = ) (00) and ( p0,1 p0,2) = (10), then the output is from row 0,
column 2 of S0, which is 3, or (11) in ) binary. Similarly, (p1,0 p1,3) and ( p1,1 p1,2) are
used to index into a row and column of S1 to produce an additional 2 bits. Next, the 4 bits
produced by S0 and S1 undergo a further permutation as follows:
P4
2 4 3 1

The output of P4 is the output of the function F.

The Switch Function The function f K only alters the leftmost 4 bits of the input. The switch
function (SW) interchanges the left and right 4 bits so that the second instance of f K operates

57
on a different 4 bits. In this second instance, the E/P, S0, S1, and P4 functions are the same.
The key input is K2. Finally apply inverse permutation to get the ciphertext

DATA ENCRYPTION STANDARD (DES)

The main standard for encrypting data was a symmetric algorithm known as the
Data Encryption Standard (DES). However, this has now been replaced by a new standard
known as the Advanced Encryption Standard (AES) which we will look at later. DES is a
64 bit block cipher which means that it encrypts data 64 bits at a time. This is contrasted
to a stream cipher in which only one bit at a time (or sometimes small groups of bits such
as a byte) is encrypted. DES was the result of a research project set up by International
Business Machines (IBM) corporation in the late 1960’s which resulted in a cipher known
as LUCIFER. In the early 1970’s it was decided to commercialise LUCIFER and a number
of significant changes were introduced. IBM was not the only one involved in these
changes as they sought technical advice from the National Security Agency (NSA) (other
outside consultants were involved but it is likely that the NSA were the major
contributors from a technical point of view). The altered version of LUCIFER was put
forward as a proposal for the new national encryption standard requested by the
National Bureau of Standards (NBS)3 . It was finally adopted in 1977 as the Data
Encryption Standard - DES (FIPS PUB 46). Some of the changes made to LUCIFER have
been the subject of much controversy even to the present day. The most notable of these
was the key size. LUCIFER used a key size of 128 bits however this was reduced to 56 bits
for DES. Even though DES actually accepts a 64 bit key as input, the remaining eight bits
are used for parity checking and have no effect on DES’s security. Outsiders were
convinced that the 56 bit key was an easy target for a brute force attack4 due to its
extremely small size. The need for the parity checking scheme was also questioned
without satisfying answers. Another controversial issue was that the S-boxes used were
designed under classified conditions and no reasons for their particular design were ever
given. This led people to assume that the NSA had introduced a “trapdoor” through which
they could decrypt any data encrypted by DES even without knowledge of the key. One
startling discovery was that the S-boxes appeared to be secure against an attack known
as Differential Cryptanalysis which was only publicly discovered by Biham and Shamir in
1990. This suggests that the NSA were aware of this attack in 1977; 13 years earlier! In

58
fact the DES designers claimed that the reason they never made the design specifications
for the S-boxes available was that they knew about a number of attacks that weren’t
public knowledge at the time and they didn’t want them leaking - this is quite a plausible
claim as differential cryptanalysis has shown. However, despite all this controversy, in
1994 NIST reaffirmed DES for government use for a further five years for use in areas
other than “classified”. DES of course isn’t the only symmetric cipher. There are many
others, each with varying levels of complexity. Such ciphers include: IDEA, RC4, RC5, RC6
and the new Advanced Encryption Standard (AES). AES is an important algorithm and
was originally meant to replace DES (and its more secure variant triple DES) as the
standard algorithm for non-classified material. However as of 2003, AES with key sizes
of 192 and 256 bits has been found to be secure enough to protect information up to top
secret. Since its creation, AES had underdone intense scrutiny as one would expect for an
algorithm that is to be used as the standard. To date it has withstood all attacks but the
search is still on and it remains to be seen whether or not this will last. We will look at
AES later in the course.

INNER WORKING OF DES

DES (and most of the other major symmetric ciphers) is based on a cipher known as the Feistel

block cipher. It consists of a number of rounds where each round contains bit-shuffling, non-

linear substitutions (S-boxes) and exclusive OR operations. As with most encryption schemes,

DES expects two inputs - the plaintext to be encrypted and the secret key. The manner in which

the plaintext is accepted, and the key arrangement used for encryption and decryption, both

determine the type of cipher it is. DES is therefore a symmetric, 64 bit block cipher as it uses the

same key for both encryption and decryption and only operates on 64 bit blocks of data at a time5

(be they plaintext or ciphertext). The key size used is 56 bits, however a 64 bit (or eight-byte) key

is actually input. The least significant bit of each byte is either used for parity (odd for DES) or set

arbitrarily and does not increase the security in any way. All blocks are numbered from left to

right which makes the eight bit of each byte the parity bit.

59
Once a plain-text message is received to be encrypted, it is arranged into 64 bit blocks required

for input. If the number of bits in the message is not evenly divisible by 64, then the last block will

be padded. Multiple permutations and substitutions are incorporated throughout in order to

increase the difficulty of performing a cryptanalysis on the cipher

OVERALL STRUCTURE

Figure below shows the sequence of events that occur during an encryption operation.

DES performs an initial permutation on the entire 64 bit block of data. It is then split into

2, 32 bit sub-blocks, Li and Ri which are then passed into what is known as a round (see

figure 2.3), of which there are 16 (the subscript i in Li and Ri indicates the current round).

Each of the rounds are identical and the effects of increasing their number is twofold - the

algorithms security is increased and its temporal efficiency decreased. Clearly these are

two conflicting outcomes and a compromise must be made. For DES the number chosen

was 16, probably to guarantee the elimination of any correlation between the ciphertext

and either the plaintext or key6 . At the end of the 16th round, the 32 bit Li and Ri output

quantities are swapped to create what is known as the pre-output. This [R16, L16]

concatenation is permuted using a function which is the exact inverse of the initial

permutation. The output of this final permutation is the 64 bit ciphertext.

60
So in total the processing of the plaintext proceeds in three phases as can be seen from

the left hand side of figure

1. Initial permutation (IP - defined in table 2.1) rearranging the bits to form the

“permuted input”.

2. Followed by 16 iterations of the same function (substitution and permutation). The

output of the last iteration consists of 64 bits which is a function of the plaintext and

key. The left and right halves are swapped to produce the preoutput.

3. Finally, the preoutput is passed through a permutation (IP−1 - defined in table 2.1)

which is simply the inverse of the initial permutation (IP). The output of IP−1 is the 64-

bit ciphertext

61
As figure shows, the inputs to each round consist of the Li , Ri pair and a 48 bit subkey

which is a shifted and contracted version of the original 56 bit key. The use of the key can

be seen in the right hand portion of figure 2.2: • Initially the key is passed through a

permutation function (PC1 - defined in table 2.2) • For each of the 16 iterations, a subkey

(Ki) is produced by a combination of a left circular shift and a permutation (PC2 - defined

in table 2.2) which is the same for each iteration. However, the resulting subkey is different for

each iteration because of repeated shifts.

62
DETAILS OF INDIVIDUAL ROUNDS

63
The main operations on the data are encompassed into what is referred to as the cipher function

and is labeled F. This function accepts two different length inputs of 32 bits and 48 bits and

outputs a single 32 bit number. Both the data and key are operated on in parallel, however the

operations are quite different. The 56 bit key is split into two 28 bit halves Ci and Di (C and D

being chosen so as not to be confused with L and R). The value of the key used in any round is

simply a left cyclic shift and a permuted contraction of that used in the previous round.

Mathematically, this can be written as

Ci = Lcsi(Ci−1), Di = Lcsi(Di−1)

Ki = P C2(Ci , Di)

where Lcsi is the left cyclic shift for round i, Ci and Di are the outputs after the shifts, P C2(.) is a
function which permutes and compresses a 56 bit number into a 48 bit number and Ki is the
actual key used in round i. The number of shifts is either one or two and is determined by the
round number i. For i = {1, 2, 9, 16} the number of shifts is one and for every other round it is two

64
S-BOX Details

65
ADVANCED ENCRYPTION ALGORITHM (AES)
 AES is a block cipher with a block length of 128 bits.
 AES allows for three different key lengths: 128, 192, or 256 bits. Most of our
discussion will assume that the key length is 128 bits.
 Encryption consists of 10 rounds of processing for 128-bit keys, 12 rounds for
192-bit keys, and 14 rounds for 256-bit keys.
 Except for the last round in each case, all other rounds are identical.
 Each round of processing includes one single-byte based substitution step, a row-
wise permutation step, a column-wise mixing step, and the addition of the round
key. The order in which these four steps are executed is different for encryption
and decryption.
 To appreciate the processing steps used in a single round, it is best to think of a
128-bit block as consisting of a 4 × 4 matrix of bytes, arranged as follows:

Therefore, the first four bytes of a 128-bit input block occupy the first column in
the 4 × 4 matrix of bytes. The next four bytes occupy the second column, and so
on.
The 4×4 matrix of bytes shown above is referred to as the state array in AES.

66
The algorithm begins with an Add round key stage followed by 9 rounds of four stages
and a tenth round of three stages.
This applies for both encryption and decryption with the exception that each stage of a
round the decryption algorithm is the inverse of its counterpart in the encryption
algorithm.
The four stages are as follows: 1. Substitute bytes 2. Shift rows 3. Mix Columns 4. Add
Round Key

Substitute Bytes
• This stage (known as SubBytes) is simply a table lookup using a 16 × 16 matrix of byte
values called an s-box.
• This matrix consists of all the possible combinations of an 8 bit sequence (28 = 16 × 16
= 256).
• However, the s-box is not just a random permutation of these values and there is a well
defined method for creating the s-box tables.
67
• The designers of Rijndael showed how this was done unlike the s-boxes in DES for which
no rationale was given.Our concern will be how state is effected in each round.
• For this particular round each byte is mapped into a new byte in the following way: the
leftmost nibble of the byte is used to specify a particular row of the s-box and the
rightmost nibble specifies a column.
• For example, the byte {95} (curly brackets represent hex values in FIPS PUB 197) selects
row 9 column 5 which turns out to contain the value {2A}.
• This is then used to update the state matrix.

Shift Row Transformation

• This stage (known as ShiftRows) is shown in figure below.
• Simple permutation an nothing more.
• It works as follow: – The first row of state is not altered. – The second row is shifted 1
bytes to the left in a circular manner. – The third row is shifted 2 bytes to the left in a
circular manner. – The fourth row is shifted 3 bytes to the left in a circular manner.

68
MIX COLUMN TRANSFORMATION
• This stage (known as MixColumn) is basically a substitution
• Each column is operated on individually. Each byte of a column is mapped into a new
value that is a function of all four bytes in the column.
• The transformation can be determined by the following matrix multiplication on state
• Each element of the product matrix is the sum of products of elements of one row and
one column.
• In this case the individual additions and multiplications are performed in GF(28 ).
• The MixColumns transformation of a single column j (0 ≤ j ≤ 3) of state can be expressed
as:
s ′ 0,j = (2 • s0,j) ⊕ (3 • s1,j) ⊕ s2,j ⊕ s3,j
s ′ 1,j = s0,j ⊕ (2 • s1,j) ⊕ (3 • s2,j) ⊕ s3,j
s ′ 2,j = s0,j ⊕ s1,j ⊕ (2 • s2,j) ⊕ (3 • s3,j)
s ′ 3,j = (3 • s0,j) ⊕ s1,j ⊕ s2,j ⊕ (2 • s3,j)

ADD ROUND KEY TRANSFORMATION

• In this stage (known as AddRoundKey) the 128 bits of state are bitwise XORed with the
128 bits of the round key.
• The operation is viewed as a columnwise operation between the 4 bytes of a state
column and one word of the round key.

69
• This transformation is as simple as possible which helps in efficiency but it also effects
every bit of state.
• The AES key expansion algorithm takes as input a 4-word key and produces a linear
array of 44 words. Each round uses 4 of these words as shown in figure.
• Each word contains 32 bytes which means each subkey is 128 bits long. Figure 7 show
pseudocode for generating the expanded key from the actual key.

BLOWFISH ALGORITHM
• a symmetric block cipher designed by Bruce Schneier in 1993/94
• characteristics
• fast implementation on 32-bit CPUs
• compact in use of memory
• simple structure for analysis/implementation
• variable security by varying key size
• has been implemented in various products
BLOWFISH KEY SCHEDULE
• uses a 32 to 448 bit key, 32-bit words stored in K-array Kj ,j from 1 to 14
• used to generate
• 18 32-bit subkeys stored in P array, P1 ….P18
• four 8x32 S-boxes stored in Si,j , each with 256 32-bit entries
Subkeys and S-Boxes Generation:
1. initialize P-array and then 4 S-boxes in order using the fractional part of pi P1 (
left most 32-bit), and so on,,, S4,255.
2. XOR P-array with key-Array (32-bit blocks) and reuse as needed: assume we have
up to k10 then P10 XOR K10,, P11 XOR K1 … P18 XOR K8
3. Encrypt 64-bit block of zeros, and use the result to update P1 and P2.
4. encrypting output form previous step using current P & S and replace P 3 and P4.
Then encrypting current output and use it to update successive pairs of P.
5. After updating all P’s (last :P17 P18), start updating S values using the encrypted
output from previous step.
• requires 521 encryptions, hence slow in re-keying
• Not suitable for limited-memory applications.

70
BLOWFISH ENCRYPTION
• uses two main operations: addition modulo 232 , and XOR
• data is divided into two 32-bit halves L0 & R0
for i = 1 to 16 do
Ri = Li-1 XOR Pi;
Li = F[Ri] XOR Ri-1;
L17 = R16 XOR P18;
R17 = L16 XOR P17;
• where
F[a,b,c,d] = ((S1,a + S2,b) XOR S3,c) + S4,d

71
BLOCK CIPHER MODES OF OPERATIONS
• Direct use of a block cipher is inadvisable
• Enemy can build up “code book” of plaintext/ciphertext equivalents
• Beyond that, direct use only works on messages that are a multiple of the cipher block
size in length
• Solution: five standard Modes of Operation: Electronic Code Book (ECB), Cipher Block
Chaining (CBC), Cipher Feedback (CFB), Output Feedback (OFB), and Counter (CTR).

Electronic Code Book

• Direct use of the block cipher
• Used primarily to transmit encrypted keys
• Very weak if used for general-purpose encryption; never use it for a file or a message.
• Attacker can build up codebook; no semantic security
• We write {P}k → C to denote “encryption of plaintext P with key k to produce ciphertext C”

72
Cipher Block Chaining
• We would like that same plaintext blocks produce different ciphertext blocks.
• Cipher Block Chaining (see figure) allows this by XORing each plaintext with the
Ciphertext from the previous round (the first round using an Initialisation Vector (IV)).
• As before, the same key is used for each block.
• Decryption works as shown in the figure because of the properties of the XOR operation,
i.e. IV ⊕ IV ⊕ P = P where IV is the Initialisation Vector and P is the plaintext.
• Obviously the IV needs to be known by both sender and receiver and it should be kept
secret along with the key for maximum security.

Cipher Feedback (CFB) Mode

• The Cipher Feedback and Output Feedback allows a block cipher to be converted into a
stream cipher.
• This eliminates the need to pad a message to be an integral number of blocks. It also can
operate in real time.
• Figure shows the CFB scheme.
• In this figure it assumed that the unit of transmission is s bits; a common value is s = 8.

73
• As with CBC, the units of plaintext are chained together, so that the ciphertext of any
plaintext unit is a function of all the preceding plaintext (which is split into s bit
segments).
• The input to the encryption function is a shift register equal in length to the block cipher
of the algorithm (although the diagram shows 64 bits, which is block size used by DES,
this can be extended to other block sizes such as the 128 bits of AES).
• This is initially set to some Initialisation Vector (IV).

OUTPUT FEEDBACK (OFB) MODE

• The Output Feedback Mode is similar in structure to that of CFB, as seen in figure 13.
• As can be seen, it is the output of the encryption function that is fed back to the shift
register in OFB, whereas in CFB the ciphertext unit is fed back to the shift register.
• One advantage of the OFB method is that bit errors in transmission do not propagate.
• For example, if a bit error occurs in C1 only the recovered value of P1 is affected;
subsequent plaintext units are not corrupted.
With CFB, C1 also serves as input to the shift register and therefore causes additional
corruption downstream.

74
Counter Mode

PUBLIC KEY CRYPTOGRAPHY

The development of public-key cryptography is the greatest and perhaps the only
true revolution in the entire history of cryptography. It is asymmetric, involving the use
of two separate keys, in contrast to symmetric encryption, which uses only one key.
Public key schemes are neither more nor less secure than private key (security depends
on the key size for both). Public-key cryptography complements rather than replaces
symmetric cryptography. Both also have issues with key distribution, requiring the use
75
of some suitable protocol. The concept of public-key cryptography evolved from an
attempt to attack two of the most difficult problems associated with symmetric
encryption:
1.) key distribution – how to have secure communications in general without having to
trust a KDC with your key

2.) digital signatures – how to verify a message comes intact from the claimed sender
Public-key/two-key/asymmetric cryptography involves the use of two keys:
 a public-key, which may be known by anybody, and can be used to encrypt
messages, and verify signatures
 a private-key, known only to the recipient, used to decrypt messages, and sign
(create) signatures.
 is asymmetric because those who encrypt messages or verify signatures cannot
decrypt messages or create signatures

Public-Key algorithms rely on one key for encryption and a different but related key
for decryption. These algorithms have the following important characteristics:
 it is computationally infeasible to find decryption key knowing only algorithm &
encryption key
 it is computationally easy to en/decrypt messages when the relevant (en/decrypt)
key is known
 either of the two related keys can be used for encryption, with the other used for
decryption (for some algorithms like RSA)
The following figure illustrates public-key encryption process and shows that a public-key
encryption scheme has six ingredients: plaintext, encryption algorithm, public & private keys,
ciphertext & decryption algorithm.

76
The essential steps involved in a public-key encryption scheme are given below:
1.) Each user generates a pair of keys to be used for encryption and decryption.

2.) Each user places one of the two keys in a public register and the other key is kept
private.

3.) If B wants to send a confidential message to A, B encrypts the message using A’s public
key.

4.) When A receives the message, she decrypts it using her private key. Nobody else can
decrypt the message because that can only be done using A’s private key (Deducing a
private key should be infeasible).

5.) If a user wishes to change his keys –generate another pair of keys and publish the
public one: no interaction with other users is needed.
Notations used in Public-key cryptography:
 The public key of user A will be denoted KUA.
 The private key of user A will be denoted KRA.
 Encryption method will be a function E.
 Decryption method will be a function D.
 If B wishes to send a plain message X to A, then he sends the cryptotext Y=E(KUA,X)
 The intended receiver A will decrypt the message: D(KRA,Y)=X
The first attack on Public-key Cryptography is the attack on Authenticity. An attacker may
impersonate user B: he sends a message E(KUA,X) and claims in the message to be B –A has
no guarantee this is so. To overcome this, B will encrypt the message using his private key:
Y=E(KRB,X). Receiver decrypts using B’s public key KRB. This shows the authenticity of the
sender because (supposedly) he is the only one who knows the private key. The entire
encrypted message serves as a digital signature. This scheme is depicted in the following
figure:

77
But, a drawback still exists. Anybody can decrypt the message using B’s public key. So, secrecy
or confidentiality is being compromised. One can provide both authentication and
confidentiality using the public-key scheme twice:

B encrypts X with his private key: Y=E(KRB,X)

B encrypts Y with A’s public key: Z=E(KUA,Y)

A will decrypt Z (and she is the only one capable of doing it): Y=D(KRA,Z)

A can now get the plaintext and ensure that it comes from B (he is the only one who knows
his private key): decrypt Y using B’s public key: X=E(KUB,Y).

78
Applications for public-key cryptosystems:
1.) Encryption/decryption: sender encrypts the message with the receiver’s public key.

2.) Digital signature: sender “signs” the message (or a representative part of the
message) using his private key

3.) Key exchange: two sides cooperate to exchange a secret key for later use in a secret-
key cryptosystem.

The main requirements of Public-key cryptography are:

1. Computationally easy for a party B to generate a pair (public key KUb, private key KRb).

2. Easy for sender A to generate ciphertext:

3. Easy for the receiver B to decrypt ciphertect using private key:

4. Computationally infeasible to determine private key (KRb) knowing public key (KUb)
5. Computationally infeasible to recover message M, knowing KUb and ciphertext C
6. Either of the two keys can be used for encryption, with the other used for decryption:
M= DKRb[EKUb(M)]=DKUb[EKRb(M)]
Easy is defined to mean a problem that can be solved in polynomial time as a function of
input length. A problem is infeasible if the effort to solve it grows faster than polynomial
time as a function of input size. Public-key cryptosystems usually rely on difficult math
functions rather than S-P networks as classical cryptosystems. One-way function is one,
easy to calculate in one direction, infeasible to calculate in the other direction (i.e., the
inverse is infeasible to compute). Trap-door function is a difficult function that becomes
easy if some extra information is known. Our aim to find a trap-door one-way function,
which is easy to calculate in one direction and infeasible to calculate in the other direction
unless certain additional information is known.
Security of Public-key schemes:
 Like private key schemes brute force exhaustive search attack is always
theoretically possible. But keys used are too large (>512bits).
 Security relies on a large enough difference in difficulty between easy
(en/decrypt) and hard (cryptanalyse) problems. More generally the hard
problem is known, its just made too hard to do in practise.

79
  Requires the use of very large numbers, hence is slow compared to private key
schemes

RSA ALGORITHM
RSA is the best known, and by far the most widely used general public key
encryption algorithm, and was first published by Rivest, Shamir & Adleman of MIT in
1978 [RIVE78]. Since that time RSA has reigned supreme as the most widely accepted
and implemented general-purpose approach to public-key encryption. The RSA scheme
is a block cipher in which the plaintext and the ciphertext are integers between 0 and n-
1 for some fixed n and typical size for n is 1024 bits (or 309 decimal digits). It is based on
exponentiation in a finite (Galois) field over integers modulo a prime, using large integers
(eg. 1024 bits). Its security is due to the cost of factoring large numbers. RSA involves a
public-key and a private-key where the public key is known to all and is used to encrypt
data or message. The data or message which has been encrypted using a public key can
only be decryted by using its corresponding private-key. Each user generates a key pair
i.e. public and private key using the following steps:
 each user selects two large primes at random - p, q
 compute their system modulus n=p.q
 calculate ø(n), where ø(n)=(p-1)(q-1)
 selecting at random the encryption key e, where 1<e<ø(n),and gcd(e,ø(n))=1
 solve following equation to find decryption key d: e.d=1 mod ø(n) and 0≤d≤n
 publish their public encryption key: KU={e,n}
 keep secret private decryption key: KR={d,n}

Both the sender and receiver must know the values of n and e, and only the receiver
knows the value of d. Encryption and Decryption are done using the following equations.
To encrypt a message M the sender:
– obtains public key of recipient KU={e,n}
– computes: C=Me mod n, where 0≤M<n
To decrypt the ciphertext C the owner:
– uses their private key KR={d,n}
– computes: M=Cd mod n = (Me) d mod n = Med mod n
80
For this algorithm to be satisfactory, the following requirements are to be met.
a) Its possible to find values of e, d, n such that Med = M mod n for all M<n
b) It is relatively easy to calculate Me and C for all values of M < n.
c) It is impossible to determine d given e and n

The way RSA works is based on Number theory: Fermat’s little theorem: if p is
prime and a is positive integer not divisible by p, then ap-1 ≡ 1 mod p. Corollary: For
any positive integer a and prime p, ap ≡ a mod p.

Fermat’s theorem, as useful as will turn out to be does not provide us with integers
d,e we are looking for –Euler’s theorem (a refinement of Fermat’s) does. Euler’s function
associates to any positive integer n, a number φ(n): the number of positive integers
smaller than n and relatively prime to n. For example, φ(37) = 36 i.e. φ(p) = p-1 for any
prime p. For any two primes p,q, φ(pq)=(p-1)(q-1). Euler’s theorem: for any relatively
prime integers a,n we have aφ(n)≡1 mod n. Corollary: For any integers a,n we have
aφ(n)+1≡a mod n Corollary: Let p,q be two odd primes and n=pq. Then: φ(n)=(p-1)(q-
1) For any integer m with 0<m<n, m(p-1)(q-1)+1 ≡ m mod n For any integers k,m with
0<m<n, mk(p-1)(q-1)+1 ≡ m mod n Euler’s theorem provides us the numbers d, e such
that Med=M mod n. We have to choose d,e such that ed=kφ(n)+1, or equivalently, d≡e-
1mod φ(n)

An example of RSA can be given as,

Select primes: p=17 & q=11
Compute n = pq =17×11=187
Compute ø(n)=(p–1)(q-1)=16×10=160
Select e : gcd(e,160)=1; choose e=7
Determine d: de=1 mod 160 and d < 160 Value is d=23 since 23×7=161= 10×160+1
Publish public key KU={7,187}
Keep secret private key KR={23,187}
Now, given message M = 88 (nb. 88<187)
encryption: C = 887 mod 187 = 11
decryption: M = 1123 mod 187 = 88
81
Another example of RSA is given as,
Let p = 11, q = 13, e = 11, m = 7
n = pq i.e. n= 11*13 = 143
ø(n)= (p-1)(q-1) i.e. (11-1)(13-1) = 120
e.d=1 mod ø(n) i.e. 11d mod 120 = 1 i.e. (11*11) mod 120=1;
so d = 11 public key :{11,143} and private key: {11,143}
C=Me mod n, so ciphertext = 711mod143 = 727833 mod 143; i.e. C = 106
M=Cd mod n, plaintext = 10611 mod 143 = 1008 mod 143; i.e. M = 7

For RSA key generation,

– determine two primes at random - p, q

– select either e or d and compute the other

– means must be sufficiently large

– typically guess and use probabilistic test

Security of RSA
There are three main approaches of attacking RSA algorithm.
Brute force key search (infeasible given size of numbers) As explained before, involves
trying all possible private keys. Best defence is using large keys.
Mathematical attacks (based on difficulty of computing ø(N), by factoring modulus N)
There are several approaches, all equivalent in effect to factoring the product of two
primes. Some of them are given as:

82
– factor N=p.q, hence find ø(N) and then d

– determine ø(N) directly and find d

– find d directly

The possible defense would be using large keys and also choosing large numbers for p
and q, which should differ only by a few bits and are also on the order of magnitude 1075
to 10100. And gcd (p-1, q-1) should be small.

DIFFIE-HELLMAN KEY EXCHANGE

Diffie-Hellman key exchange (D-H) is a cryptographic protocol that allows two parties
that have no prior knowledge of each other to jointly establish a shared secret key over
an insecure communications channel. This key can then be used to encrypt subsequent
communications using a symmetric key cipher. The D-H algorithm depends for its
effectiveness on the difficulty of computing discrete logarithms.
First, a primitive root of a prime number p, can be defined as one whose powers generate
all the integers from 1 to p-1. If a is a primitive root of the prime number p, then the
numbers, a mod p, a2 mod p,..., ap-1 mod p, are distinct and consist of the integers from 1
through p 1 in some permutation.
For any integer b and a primitive root a of prime number p, we can find a unique exponent

i such that .The exponent i is referred to as the

discrete logarithm of b for the base a, mod p. We express this value as dloga,p (b). The
algorithm is summarized below:

83
For this scheme, there are two publicly known numbers: a prime number q and an integer
α that is a primitive root of q. Suppose the users A and B wish to exchange a key. User A
selects a random integer XA < q and computes YA = αXA mod q. Similarly, user B
independently selects a random integer XA < q and computes YB = αXB mod q. Each side
keeps the X value private and makes the Y value available publicly to the other side. User
A computes the key as K = (YB)XA mod q and user B computes the key as K = (YA)XB mod
q. These two calculations produce identical results.
Discrete Log Problem
The (discrete) exponentiation problem is as follows: Given a base a, an exponent b and a
modulus p, calculate c such that ab ≡ c (mod p) and 0 ≤ c < p. It turns out that this problem
is fairly easy and can be calculated "quickly" using fast-exponentiation. The discrete log
problem is the inverse problem: Given a base a, a result c (0 ≤ c < p) and a modulus p,

84
calculate the exponent b such that ab ≡ c (mod p). It turns out that no one has found

a quick way to solve this problem With DLP, if P had 300 digits, Xa and Xb have more than
100 digits, it would take longer than the life of the universe to crack the method.
Examples for D-H key distribution scheme:
1) Let p = 37 and g = 13.

Let Alice pick a = 10. Alice calculates 1310 (mod 37) which is 4 and sends that to Bob. Let
Bob pick b = 7. Bob calculates 137 (mod 37) which is 32 and sends that to Alice. (Note: 6
and 7 are secret to Alice and Bob, respectively, but both 4 and 32 are known by all.)
10 (mod 37) which is 30, the secret key.

7 (mod 37) which is 30, the same secret key.

2) Let p = 47 and g = 5. Let Alice pick a = 18. Alice calculates 518 (mod 47) which is 2 and
sends that to Bob. Let Bob pick b = 22. Bob calculates 522 (mod 47) which is 28 and sends
that to Alice.
18 (mod 47) which is 24, the secret key.
22 (mod 47) which is 24, the same secret key

Man-in-the-Middle Attack on D-H protocol

Suppose Alice and Bob wish to exchange keys, and Darth is the adversary. The attack
proceeds as follows:
1. Darth prepares for the attack by generating two random private keys XD1 and XD2 and
then computing the corresponding public keys YD1 and YD2.

2. Alice transmits YA to Bob.

3. Darth intercepts YA and transmits YD1 to Bob. Darth also calculates K2 = (YA)XD2mod q.

4. Bob receives YD1 and calculates K1 = (YD1)XE mod q.

5. Bob transmits XA to Alice.

6. Darth intercepts XA and transmits YD2 to Alice. Darth calculates K1 = (YB)XD1 mod q.

7. Alice receives YD2 and calculates K2 = (YD2)XA mod q.

85
At this point, Bob and Alice think that they share a secret key, but instead Bob and Darth
share secret key K1 and Alice and Darth share secret key K2. All future communication
between Bob and Alice is compromised in the following way:
1. Alice sends an encrypted message M: E(K2, M).

2. Darth intercepts the encrypted message and decrypts it, to recover M.

3. Darth sends Bob E(K1, M) or E(K1, M'), where M' is any message. In the first case, Darth
simply wants to eavesdrop on the communication without altering it. In the second case,
Darth wants to modify the message going to Bob.
The key exchange protocol is vulnerable to such an attack because it does not
authenticate the participants. This vulnerability can be overcome with the use of digital
signatures and public-key certificates.

ELLIPTIC CURVE CRYPTOGRAPHY (ECC)

Elliptic curve cryptography (ECC) is an approach to public-key cryptography based on
the algebraic structure of elliptic curves over finite fields. The use of elliptic curves in
cryptography was suggested independently by Neal Koblitz and Victor S. Miller in 1985.
The principal attraction of ECC compared to RSA is that it appears to offer equal security
for a far smaller bit size, thereby reducing the processing overhead.
Elliptic Curve over GF(p)
Let GF(p) be a finite field, p > 3, and let a, b
4a3 + 27b2 ≡ 0 (mod p). An elliptic curve, E(a,b)(GF(p)),

is defined as the set of points (x,y) ᴄ GF(p) * GF(p) which satisfy the equation
y2 ≡ x3 + ax + b (mod p), together with a special point, O, called the point at infinity. Let
P and Q be two points on E(a,b)(GF(p)) and O is the point at infinity.
• P+O = O+P = P

• If P = (x1,y1) then -P = (x1 ,-y1) and P + (-P) = O.

• If P = (x1,y1) and Q = (x2,y2), and P and Q are not O.

then P +Q = (x3 ,y3) where

x3 = ƛ 2 - x1 - x2
86
y3 = ƛ (x1 - x3) - y1 and
ƛ = (y2-y1)/(x2-x1) if P ≠ Q
ƛ = (3x12+a)/ 2y1 if P = Q

An elliptic curve may be defined over any finite field GF(q). For GF(2m), the curve has a
different form:- y2 + xy = x3 + ax2 + b, where b !=0.

Cryptography with Elliptic Curves

The addition operation in ECC is the counterpart of modular multiplication in RSA, and
multiple addition is the counterpart of modular exponentiation. To form a cryptographic
system using elliptic curves, some kind of hard problem such as discrete logarithm or
factorization of prime numbers is needed. Considering the equation, Q=kP, where Q,P are
points in an elliptic curve, it is “easy” to compute Q given k,P , but “hard” to find k given Q,P.
This is known as the elliptic curve logarithm problem. k could be so large as to make brute-
force fail.

ECC Key Exchange

Pick a prime number p= 2180 and elliptic curve parameters a and b for the equation
y2 ≡ x3 + ax + b (mod p) which defines the elliptic group of points Ep(a,b). Select
generator point G=(x1,y1) in Ep(a,b) such that the smallest value for which nG=O be a
very large prime number. Ep(a,b) and G are parameters of the cryptosystem known to all
participants. The following steps take place:
• A & B select private keys nA<n, nB<n

• compute public keys: PA=nA×G, PB=nB×G

• Compute shared key: K=nA×PB, K=nB×PA {same since K=nA×nB×G }

ECC Encryption/Decryption As with key exchange system, an encryption/decryption

system requires a point G and and elliptic group Ep(a,b) as parameters. First thing to be
done is to encode the plaintext message m to be sent as an x-y point Pm. Each user
chooses private key nA<n and computes public key PA=nA×G. To encrypt and send a
message to Pm to B, A chooses a random positive integer k and produces the ciphertext
Cm consisting of the pair of points Cm={kG, Pm+kPb}. here, A uses B’s public key. To
87
decrypt the ciphertext, B multiplies the first point in the pair by B’s secret key and
subtracts the result from the second point Pm+kPb – nB(kG) = Pm+k(nBG) – nB(kG) =
Pm A has masked the message Pm by adding kPb to it. Nobody but A knows the value of
k, so even though Pb is a public key, nobody can remove the mask kPb. For an attacker to
recover the message, he has to compute k given G and kG, which is assumed hard.
Security of ECC To protect a 128 bit AES key it would take a RSA Key Size of 3072 bits
whereas an ECC Key Size of 256 bits.

Hence for similar security ECC offers significant computational advantages.

Applications of ECC:
 Wireless communication devices
 Smart cards
 Web servers that need to handle many encryption sessions
 Any application where security is needed but lacks the power, storage and
computational power that is necessary for our current cryptosystems

KEY MANAGEMENT
One of the major roles of public-key encryption has been to address the problem of key
distribution. Two distinct aspects to use of public key encryption are present.
The distribution of public keys.

Use of public-key encryption to distribute secret keys.

Distribution of Public Keys The most general schemes for distribution of public keys
are given below

88
PUBLIC ANNOUNCEMENT OF PUBLIC KEYS
Here any participant can send his or her public key to any other participant or broadcast
the key to the community at large. For example, many PGP users have adopted the
practice of appending their public key to messages that they send to public forums.

Though this approach seems convenient, it has a major drawback. Anyone can forge such
a public announcement. Some user could pretend to be user A and send a public key to
another participant or broadcast such a public key. Until the time when A discovers about
the forgery and alerts other participants, the forger is able to read all encrypted messages
intended for A and can use the forged keys for authentication.

PUBLICLY AVAILABLE DIRECTORY

A greater degree of security can be achieved by maintaining a publicly available dynamic
directory of public keys. Maintenance and distribution of the public directory would have
to be the responsibility of some trusted entity or organization. It includes the following
elements:
1. The authority maintains a directory with a {name, public key} entry for each
participant.
2. Each participant registers a public key with the directory authority. Registration would
have to be in person or by some form of secure authenticated communication.

89
 3. A participant may replace the existing key with a new one at any time, either
because of the desire to replace a public key that has already been used for a large
amount of data, or because the corresponding private key has been compromised
in some way.
4. Participants could also access the directory electronically. For this purpose,
secure, authenticated communication from the authority to the participant is
mandatory. This scheme has still got some vulnerabilities. If an adversary
succeeds in obtaining or computing the private key of the directory authority, the
adversary could authoritatively pass out counterfeit public keys and subsequently
impersonate any participant and eavesdrop on messages sent to any participant.
Or else, the adversary may tamper with the records kept by the authority.

PUBLIC-KEY AUTHORITY
Stronger security for public-key distribution can be achieved by providing tighter
control over the distribution of public keys from the directory. This scenario assumes the
existence of a public authority (whoever that may be) that maintains a dynamic directory
of public keys of all users. The public authority has its own (private key, public key) that
it is using to communicate to users. Each participant reliably knows a public key for the
authority, with only the authority knowing the corresponding private key. For example,
consider that Alice and Bob wish to communicate with each other and the following steps
take place and are also shown in the figure below:

90
1.) Alice sends a timestamped message to the central authority with a request for Bob’s
public key (the time stamp is to mark the moment of the request)

2.) The authority sends back a message encrypted with its private key (for
authentication) –message contains Bob’s public key and the original message of Alice –
this way Alice knows this is not a reply to an old request;

3.) Alice starts the communication to Bob by sending him an encrypted message
containing her identity IDA and a nonce N1 (to identify uniquely this transaction)

4.) Bob requests Alice’s public key in the same way (step 1)

5.) Bob acquires Alice’s public key in the same way as Alice did. (Step-2)

6.) Bob replies to Alice by sending an encrypted message with N1 plus a new generated
nonce N2 (to identify uniquely the transaction)

7.) Alice replies once more encrypting Bob’s nonce N2 to assure bob that its
correspondent is Alice
Thus, a total of seven messages are required. However, the initial four messages need be
used only infrequently because both A and B can save the other's public key for future
use, a technique known as caching. Periodically, a user should request fresh copies of the
public keys of its correspondents to ensure currency.

91
PUBLIC-KEY CERTIFICATES
The above technique looks attractive, but still has some drawbacks. For any
communication between any two users, the central authority must be consulted by both
users to get the newest public keys i.e. the central authority must be online 24 hours/day. If
the central authority goes offline, all secure communications get to a halt. This clearly leads
to an undesirable bottleneck. A further improvement is to use certificates, which can be used
to exchange keys without contacting a public-key authority, in a way that is as reliable as if
the keys were obtained directly from a public-key authority. A certificate binds an identity
to public key, with all contents signed by a trusted Public-Key or Certificate Authority (CA).
A user can present his or her public key to the authority in a secure manner, and obtain a
certificate. The user can then publish the certificate. Anyone needed this user's public key can
obtain the certificate and verify that it is valid by way of the attached trusted signature. A
participant can also convey its key information to another by transmitting its certificate.
Other participants can verify that the certificate was created by the authority. This certificate
issuing scheme does have the following requirements:
1. Any participant can read a certificate to determine the name and public key of the
certificate's owner.

2. Any participant can verify that the certificate originated from the certificate authority and
is not counterfeit.

3. Only the certificate authority can create and update certificates.

4. Any participant can verify the currency of the certificate.

92
Application must be in person or by some form of secure authenticated communication.
For participant A, the authority provides a certificate of the form
CA = E(PRauth, [T||IDA||PUa]) where PRauth is the private key used by the authority and
T is a timestamp. A may then pass this certificate on to any other participant, who reads
and verifies the certificate as follows: D(PUauth, CA) = D(PUauth, E(PRauth, [T||IDA||PUa]))
= (T||IDA||PUa) The recipient uses the authority's public key, PUauth to decrypt the
certificate. Because the certificate is readable only using the authority's public key, this
verifies that the certificate came from the certificate authority. The elements IDA and PUa
provide the recipient with the name and public key of the certificate's holder. The
timestamp T validates the currency of the certificate. The timestamp counters the
following scenario. A's private key is learned by an adversary. A generates a new
private/public key pair and applies to the certificate authority for a new certificate.
Meanwhile, the adversary replays the old certificate to B. If B then encrypts messages
using the compromised old public key, the adversary can read those messages. In this
context, the compromise of a private key is comparable to the loss of a credit card. The
owner cancels the credit card number but is at risk until all possible communicants are
aware that the old credit card is obsolete. Thus, the timestamp serves as something like
an expiration date. If a certificate is sufficiently old, it is assumed to be expired.
One scheme has become universally accepted for formatting public-key certificates: the
X.509 standard. X.509 certificates are used in most network security applications,
including IP security, secure sockets layer (SSL), secure electronic transactions (SET), and
S/MIME.
SECRET KEY DISTRIBUTION WITH CONFIDENTIALITY AND AUTHENTICATION
It is assumed that A and B have exchanged public keys by one of the schemes described
earlier. Then the following steps occur:

93
 1. A uses B's public key to encrypt a message to B containing an identifier of A (IDA) and
a nonce (N1), which is used to identify this transaction uniquely.
2. B sends a message to A encrypted with PUa and containing A's nonce (N1) as well as a
new nonce generated by B (N2) Because only B could have decrypted message (1), the
presence of N1 in message (2) assures A that the correspondent is B.
3. A returns N2 encrypted using B's public key, to assure B that its correspondent is A.
4. A selects a secret key Ks and sends M = E(PUb, E(PRa, Ks)) to B. Encryption of this
message with B's public key ensures that only B can read it; encryption with A's
private key ensures that only A could have sent it.
5. B computes D(PUa, D(PRb, M)) to recover the secret key.

The result is that this scheme ensures both confidentiality and authentication in the
exchange of a secret key.

94
 UNIT-3
Message Authentication Algorithms and Hash Function: Authentication Requirements,
Functions, Message Authentication Codes, Hash Functions, Secure Hash Algorithms,
Whirlpool, HMAC, CMAC, Digital Signatures, Knapsack Algorithm, Authentication
Applications: Kerberos, X.509 Authentication Services, Public-Key Infrastructure,
Biometric Authentication.

MESSAGE AUTHENTICATION
Message authentication is a procedure to verify that received messages come from
the alleged source and have not been altered. Message authentication may also verify
sequencing and timeliness. It is intended against the attacks like content modification,
sequence modification, timing modification and repudiation. For repudiation, concept of
digital signatures is used to counter it. There are three classes by which different types of
functions that may be used to produce an authenticator. They are:

Message encryption–the ciphertext serves as authenticator

Message authentication code (MAC)–a public function of the message and a secret
key producing a fixed-length value to serve as authenticator. This does not provide a
digital signature because A and B share the same key.
Hash function–a public function mapping an arbitrary length message into a fixed-
length hash value to serve as authenticator. This does not provide a digital signature
because there is no key.
MESSAGE ENCRYPTION:
Message encryption by itself can provide a measure of authentication. The analysis differs
for conventional and public-key encryption schemes. The message must have come from
the sender itself, because the ciphertext can be decrypted using his (secret or public) key.
Also, none of the bits in the message have been altered because an opponent does not
know how to manipulate the bits of the ciphertext to induce meaningful changes to the
plaintext. Often one needs alternative authentication schemes than just encrypting the
message.
Sometimes one needs to avoid encryption of full messages due to legal requirements.

95
 Encryption and authentication may be separated in the system architecture.

The different ways in which message encryption can provide authentication,

confidentiality in both symmetric and asymmetric encryption techniques is explained
with the table below:

MESSAGE AUTHENTICATION CODE

An alternative authentication technique involves the use of a secret key to
generate a small fixed-size block of data, known as cryptographic checksum or MAC,
which is appended to the message. This technique assumes that both the communicating
parties say A and B share a common secret key K. When A has a message to send to B, it
calculates MAC as a function C of key and message given as: MAC=Ck(M) The message

96
and the MAC are transmitted to the intended recipient, who upon receiving performs the
same calculation on the received message, using the same secret key to generate a new
MAC. The received MAC is compared to the calculated MAC and only if they match, then:
1. The receiver is assured that the message has not been altered: Any alternations been
done the MAC’s do not match.
2. The receiver is assured that the message is from the alleged sender: No one except the
sender has the secret key and could prepare a message with a proper MAC.

3. If the message includes a sequence number, then receiver is assured of proper

sequence as an attacker cannot successfully alter the sequence number.
Basic uses of Message Authentication Code (MAC) are shown in the figure:

There are three different situations where use of a MAC is desirable:

If a message is broadcast to several destinations in a network (such as a military
control center), then it is cheaper and more reliable to have just one node responsible to
evaluate the authenticity –message will be sent in plain with an attached authenticator.

If one side has a heavy load, it cannot afford to decrypt all messages –it will just check
the authenticity of some randomly selected messages.

97
 Authentication of computer programs in plaintext is very attractive service as they
need not be decrypted every time wasting of processor resources. Integrity of the
program can always be checked by MAC.
MESSAGE AUTHENTICATION CODE BASED ON DES
The Data Authentication Algorithm, based on DES, has been one of the most widely used
MACs for a number of years. The algorithm is both a FIPS publication (FIPS PUB 113) and
an ANSI standard (X9.17). But, security weaknesses in this algorithm have been
discovered and it is being replaced by newer and stronger algorithms. The algorithm can
be defined as using the cipher block chaining (CBC) mode of operation of DES shown
below with an initialization vector of zero.

The data (e.g., message, record, file, or program) to be authenticated are grouped into
contiguous 64-bit blocks: D1, D2,..., DN. If necessary, the final block is padded on the right
with zeroes to form a full 64-bit block. Using the DES encryption algorithm, E, and a secret
key, K, a data authentication code (DAC) is calculated as follows:

98
The DAC consists of either the entire block ON or the leftmost M bits of the block, with 16
≤ M ≤ 64
Use of MAC needs a shared secret key between the communicating parties and also MAC
does not provide digital signature. The following table summarizes the confidentiality
and authentication implications of the approaches shown above.

HASH FUNCTION
A variation on the message authentication code is the one-way hash function. As
with the message authentication code, the hash function accepts a variable-size message
M as input and produces a fixed-size hash code H(M), sometimes called a message digest,
as output. The hash code is a function of all bits of the message and provides an error-
detection capability: A change to any bit or bits in the message results in a change to the
hash code. A variety of ways in which a hash code can be used to provide message
authentication is shown below and explained stepwise in the table.

99
100
 In cases where confidentiality is not required, methods b and c have an advantage
over those that encrypt the entire message in that less computation is required. Growing
interest for techniques that avoid encryption is due to reasons like, Encryption software
is quite slow and may be covered by patents. Also encryption hardware costs are not
negligible and the algorithms are subject to U.S export control. A fixed-length hash value
h is generated by a function H that takes as input a message of arbitrary length: h=H(M).
A sends M and H(M)

B authenticates the message by computing H(M) and checking the match

Requirements for a hash function: The purpose of a hash function is to produce a

“fingerprint” of a file, message, or other block of data. To be used for message
authentication, the hash function H must have the following properties
H can be applied to a message of any size

H produces fixed-length output

Computationally easy to compute H(M) for any given M

101
 Computationally infeasible to find M such that H(M)=h, for a given h, referred to as the
one-way property

Computationally infeasible to find M’ such that H(M’)=H(M), for a given M, referred to

as weak collision resistance.

Computationally infeasible to find M,M’ with H(M)=H(M’) (to resist to birthday

attacks), referred to as strong collision resistance.

Examples of simple hash functions are:

 Bit-by-bit XOR of plaintext blocks: h= D1⊕D2⊕…⊕DN

 Rotated XOR –before each addition the hash value is rotated to the left with 1 bit

 Cipher block chaining technique without a secret key.

MD5 MESSAGE DIGEST ALGORITHM

The MD5 message-digest algorithm was developed by Ron Rivest at MIT and it
remained as the most popular hash algorithm until recently. The algorithm takes as input,
a message of arbitrary length and produces as output, a 128-bit message digest. The input
is processed in 512-bit blocks. The processing consists of the following steps:
1.) Append Padding bits: The message is padded so that its length in bits is congruent to
448 modulo 512 i.e. the length of the padded message is 64 bits less than an integer
multiple of 512 bits. Padding is always added, even if the message is already of the desired
length. Padding consists of a single 1-bit followed by the necessary number of 0-bits.
2.) Append length: A 64-bit representation of the length in bits of the original message
(before the padding) is appended to the result of step-1. If the length is larger than 264,
the 64 least representative bits are taken.

3.) Initialize MD buffer: A 128-bit buffer is used to hold intermediate and final results of
the hash function. The buffer can be represented as four 32-bit registers (A, B, C, D) and
are initialized with A=0x01234567, B=0x89ABCDEF, C=0xFEDCBA98, D=0x76543210 i.e.
32-bit integers (hexadecimal values).

102
4.) Process Message in 512-bit (16-word) blocks: The heart of algorithm is the compression
function that consists of four rounds of processing and this module is labeled HMD5 in
the above figure and logic is illustrated in the following figure. The four rounds have a
similar structure, but each uses a different primitive logical function, referred to as F, G,
H and I in the specification. Each block takes as input the current 512-bit block being
processed Yq and the 128-bit buffer value ABCD and updates the contents of the buffer.
Each round also makes use of one-fourth of a 64- element table T*1….64+, constructed
from the sine function. The ith element of T, denoted T[i], has the value equal to the
integer part of 232 * abs(sin(i)), where i is in radians. As the value of abs(sin(i)) is a value
between 0 and 1, each element of T is an integer that can be represented in 32-bits and
would eliminate any regularities in the input data. The output of fourth round is added to
the input to the first round (CVq) to produce CVq+1. The addition is done independently
for each of the four words in the buffer with each of the corresponding words in CVq,
using addition modulo 232. This operation is shown in the figure below:

103
5.) Output: After all L 512-bit blocks have been processed, the output from the Lth stage
is the 128- bit message digest. MD5 can be summarized as follows:
CV0 = IV CVq+1 = SUM32(CVq,RFIYqRFH[Yq,RFG[Yq,RFF[Yq,CVq]]]]) MD = CVL
Where,
IV = initial value of ABCD buffer, defined in step 3.
Yq = the qth 512-bit block of the message
L = the number of blocks in the message
CVq = chaining variable processed with the qth block of the message.
RFx = round function using primitive logical function x.
MD = final message digest value
SUM32 = Addition modulo 232 performed separately.
MD5 Compression Function:
Each round consists of a sequence of 16 steps operating on the buffer ABCD. Each step is
of the form, a = b+((a+g(b,c,d)+X[k]+T[i])<<<s)
where a, b, c, d refer to the four words of the buffer but used in varying permutations.
After 16 steps, each word is updated 4 times. g(b,c,d) is a different nonlinear function in
each round (F,G,H,I). Elementary MD5 operation of a single step is shown below.
104
The primitive function g of the F,G,H,I is given as:

Where the logical operators (AND, OR, NOT, XOR) are represented by the symbols (ᴧ,ᴠ,
~,(+)).
Each round mixes the buffer input with the next "word" of the message in a complex, non-
linear manner. A different non-linear function is used in each of the 4 rounds (but the
same function for all 16 steps in a round). The 4 buffer words (a,b,c,d) are rotated from
step to step so all are used and updated. g is one of the primitive functions F,G,H,I for the
4 rounds respectively. X[k] is the kth 32-bit word in the current message block. T[i] is the
ith entry in the matrix of constants T. The addition of varying constants T and the use of
different shifts helps ensure it is extremely difficult to compute collisions. The array of
32-bit words X[0..15] holds the value of current 512-bit input block being processed.
Within a round, each of the 16 words of X[i] is used exactly once, during one step. The
order in which these words is used varies from round to round. In the first round, the

105
words are used in their original order. For rounds 2 through 4, the following
permutations are used
ƿ2(i) = (1 + 5i) mod 16

ƿ3(i) = (5 + 3i) mod 16

ƿ4(I) = 7i mod 16

MD4
Precursor to MD5
Design goals of MD4 (which are carried over to MD5)
Security
Speed
Simplicity and compactness
Favor little-endian architecture
Main differences between MD5 and MD4
A fourth round has been added.
Each step now has a unique additive constant.
The function g in round 2 was changed from (bc v bd v cd) to (bd v cd’) to make g less
symmetric.
Each step now adds in the result of the previous step. This promotes a faster
"avalanche effect".
The order in which input words are accessed in rounds 2 and 3 is changed, to make
these patterns less like each other.
The shift amounts in each round have been approximately optimized, to yield a faster
"avalanche effect." The shifts in different rounds are distinct.

SECURE HASH ALGORITHM

The secure hash algorithm (SHA) was developed by the National Institute of Standards
and Technology (NIST). SHA-1 is the best established of the existing SHA hash functions,
and is employed in several widely used security applications and protocols. The
algorithm takes as input a message with a maximum length of less than 264 bits and
produces as output a 160-bit message digest.

106
The input is processed in 512-bit blocks. The overall processing of a message follows the
structure of MD5 with block length of 512 bits and a hash length and chaining variable length
of 160 bits. The processing consists of following steps:

1.) Append Padding Bits: The message is padded so that length is congruent to 448 modulo
512; padding always added –one bit 1 followed by the necessary number of 0 bits.
2.) Append Length: a block of 64 bits containing the length of the original message is added.
3.) Initialize MD buffer: A 160-bit buffer is used to hold intermediate and final results on the
hash function. This is formed by 32-bit registers A,B,C,D,E. Initial values: A=0x67452301,
B=0xEFCDAB89, C=0x98BADCFE, D=0x10325476, E=C3D2E1F0. Stores in big-endian format
i.e. the most significant bit in low address.
4.) Process message in blocks 512-bit (16-word) blocks: The processing of a single 512-bit
block is shown above. It consists of four rounds of processing of 20 steps each. These four
rounds have similar structure, but uses a different primitive logical function, which we refer
to as f1, f2, f3 and f4. Each round takes as input the current 512-bit block being processed
and the 160-bit buffer value ABCDE and updates the contents of the buffer. Each round also
makes use of four distinct additive constants Kt. The output of the fourth round i.e. eightieth
step is added to the input to the first round to produce CVq+1.
5.) Output: After all L 512-bit blocks have been processed, the output from the Lth stage
is the 160-bit message digest.

107
The behavior of SHA-1 is as follows: CV0 = IV CVq+1 = SUM32(CVq, ABCDEq) MD = CVL
Where, IV = initial value of ABCDE buffer ABCDEq = output of last round of processing of
qth message block L = number of blocks in the message SUM32 = Addition modulo 232
MD = final message digest value.

SHA-1 Compression Function:

Each round has 20 steps which replaces the 5 buffer words. The logic present in each one
of the 80 rounds present is given as (A,B,C,D,E) <- (E + f(t,B,C,D) + S5(A)+ Wt+
Kt),A,S30(B),C,D Where, A, B, C, D, E = the five words of the buffer t = step number; 0< t
< 79 f(t,B,C,D) = primitive logical function for step t Sk = circular left shift of the 32-bit
argument by k bits Wt = a 32-bit word derived from current 512-bit input block. Kt = an
additive constant; four distinct values are used + = modulo addition.

108
SHA shares much in common with MD4/5, but with 20 instead of 16 steps in each of the
4 rounds. Note the 4 constants are based on sqrt(2,3,5,10). Note also that instead of just
splitting the input block into 32-bit words and using them directly, SHA-1 shuffles and
mixes them using rotates & XOR’s to form a more complex input, and greatly increases
the difficulty of finding collisions. A sequence of logical functions f0, f1,..., f79 is used in the
SHA-1. Each ft, 0<=t<=79, operates on three 32-bit words B, C, D and produces a 32-bit
word as output. ft(B,C,D) is defined as follows: for words B, C, D, ft(B,C,D) = (B AND C) OR
((NOT B) AND D) ( 0 <= t <= 19) ft(B,C,D) = B XOR C XOR D (20 <= t <= 39) ft(B,C,D) =
(B AND C) OR (B AND D) OR (C AND D) (40 <= t <= 59) ft(B,C,D) = B XOR C XOR D (60
<= t <= 79).

WHIRLPOOL HASH FUNCTION

• Created by Vincent Rijmen and Paulo S. L. M. Barreto
• Hashes messages of plaintext length 2^256
• Result is a 512 bit message
• Three versions have been released – WHIRLPOOL-0 – WHIRLPOOL-T – WHIRLPOOL
 designed specifically for hash function use
 with security and efficiency of AES
 but with 512-bit block size and hence hash
 similar structure & functions as AES but

109
  input is mapped row wise
 has 10 rounds
 a different primitive polynomial for GF(2^8)
 uses different S-box design & values
• “W” is a 512-bit block cipher
• “m” is the plaintext, split into 512 bit blocks
• “H” is the blocks formed from the hashes
WHIRLPOOL OVERVIEW

• The block cipher W is the core element of the Whirlpool hash function
• It is comprised of 4 steps.
– Add Round Key

110
 – Shift Columns
– Mix Rows
– Substitute bytes
Add Round Key
• During the Add Round Key step, the message is XOR’d with the key
• If this is the first message block being run through, the key is a block of all zeros
• If this is any block except the first, the key is the digest of the previous block
Shift Columns
• Starting from left to right, each column gets rotated vertically a number of bytes equal
to which number column it is, from top to bottom –
Ex:
• [0,0][0,1][0,2] [0,0][2,1][1,2]
• [1,0][1,1][1,2] ------> [1,0][0,1][2,2]
• [2,0][2,1][2,2] [2,0][1,1][0,2]
Mix Rows
• Each row gets shifted horizontally by the number of row it is. Similar to the shift
column function, but rotated left to right –
Ex:
• [0,0][0,1][0,2] [0,0][0,1][0,2]
• [1,0][1,1][1,2] ------> [1,2][1,0][1,2]
• [2,0][2,1][2,2] [2,1][2,2][0,2]
Substitute bytes
• Each byte in the message is passed through a set of s-boxes
• The output of this is then set to be the key for the next round

HMAC
Interest in developing a MAC, derived from a cryptographic hash code has been
increasing mainly because hash functions are generally faster and are also not limited by
export restrictions unlike block ciphers. Additional reason also would be that the library
code for cryptographic hash functions is widely available. The original proposal is for
incorporation of a secret key into an existing hash algorithm and the approach that
received most support is HMAC. HMAC is specified as Internet standard RFC2104. It

111
makes use of the hash function on the given message. Any of MD5, SHA-1, RIPEMD-160
can be used.

HMAC Design Objectives

To use, without modifications, available hash functions

To allow for easy replaceability of the embedded hash function

To preserve the original performance of the hash function

To use and handle keys in a simple way

To have a well understood cryptographic analysis of the strength of the MAC based on
reasonable assumptions on the embedded hash function

The first two objectives are very important for the acceptability of HMAC. HMAC treats
the hash function as a “black box”, which has two benefits. First is that an existing
implementation of the hash function can be used for implementing HMAC making the
bulk of HMAC code readily available without modification. Second is that if ever an
existing hash function is to be replaced, the existing hash function module is removed and
new module is dropped in. The last design objective provides the main advantage of
HMAC over other proposed hash-based schemes. HMAC can be proven secure provided
that the embedded hash function has some reasonable cryptographic strengths.

Steps involved in HMAC algorithm:

1. Append zeroes to the left end of K to create a b-bit string K+ (ex: If K is of length 160-
bits and b = 512, then K will be appended with 44 zero bytes).
2. XOR(bitwise exclusive-OR) K+ with ipad to produce the b-bit block Si.
3. Append M to Si.
4. Now apply H to the stream generated in step-3
5. XOR K+ with opad to produce the b-bit block S0.
6. Append the hash result from step-4 to S0.
7. Apply H to the stream generated in step-6 and output the result.

112
HMAC Algorithm

HMAC Structure

The XOR with ipad results in flipping one-half of the bits of K. Similarly, XOR with opad
results in flipping one-half of the bits of K, but different set of bits. By passing S i and S0
through the compression function of the hash algorithm, we have pseudorandomly
generated two keys from K.

113
HMAC should execute in approximately the same time as the embedded hash function for
long messages. HMAC adds three executions of the hash compression function (for S 0, Si,
and the block produced from the inner hash)
A more efficient implementation is possible. Two quantities are precomputed.
f(IV, (K+
f(IV, (K+
where f is the compression function for the hash function which takes as arguments a
chaining variable of n bits and a block of b-bits and produces a chaining variable of n bits.

As shown in the above figure, the values are needed to be computed initially and every
time a key changes. The precomputed quantities substitute for the initial value (IV) in the
hash function. With this implementation, only one additional instance of the compression
function is added to the processing normally produced by the hash function. This
implementation is worthwhile if most of the messages for which a MAC is computed are
short.
Security of HMAC:

The appeal of HMAC is that its designers have been able to prove an exact relationship
between the strength of the embedded hash function and the strength of HMAC. The

114
security of a MAC function is generally expressed in terms of the probability of successful
forgery with a given amount of time spent by the forger and a given number of message-
MAC pairs created with the same key. Have two classes of attacks on the embedded hash
function:
1. The attacker is able to compute an output of the compression function even with an IV
that is random, secret and unknown to the attacker.

2. The attacker finds collisions in the hash function even when the IV is random and
secret.
These attacks are likely to be caused by brute force attack on key used which has work of
order 2n; or a birthday attack which requires work of order 2(n/2) - but which requires
the attacker to observe 2n blocks of messages using the same key - very unlikely. So even
MD5 is still secure for use in HMAC given these constraints.

CMAC
In cryptography, CMAC (Cipher-based Message Authentication Code)[1] is a block cipher-
based message authentication code algorithm. It may be used to provide assurance of the
authenticity and, hence, the integrity of binary data. This mode of operation fixes security
deficiencies of CBC-MAC (CBC-MAC is secure only for fixed-length messages).
The core of the CMAC algorithm is a variation of CBC-
MAC that Black and Rogaway proposed and analyzed under the name XCBC and [2]

submitted to NIST.[3] The XCBC algorithm efficiently addresses the security deficiencies
of CBC-MAC, but requires three keys. Iwata and Kurosawa proposed an improvement of
XCBC and named the resulting algorithm One-Key CBC-MAC (OMAC) in their
papers.[4][5] They later submitted OMAC1[6], a refinement of OMAC, and additional
security analysis.[7] The OMAC algorithm reduces the amount of key material required for
XCBC. CMAC is equivalent to OMAC1.

115
To generate an ℓ-bit CMAC tag (t) of a message (m) using a b-bit block cipher (E) and a
secret key (k), one first generates two b-bit sub-keys (k1 and k2) using the following
algorithm (this is equivalent to multiplication by x and x2 in a finite field GF(2b)). Let ≪
denote the standard left-shift operator and ⊕ denote exclusive or:

1. Calculate a temporary value k0 = Ek(0).

2. If msb(k0) = 0, then k1 = k0 ≪ 1, else k1 = (k0 ≪ 1) ⊕ C; where C is a certain constant
that depends only on b. (Specifically, C is the non-leading coefficients of the
lexicographically first irreducible degree-b binary polynomial with the minimal
number of ones.)
3. If msb(k1) = 0, then k2 = k1 ≪ 1, else k2 = (k1 ≪ 1) ⊕ C.
4. Return keys (k1, k2) for the MAC generation process.

As a small example, suppose b = 4, C = 00112, and k0 = Ek(0) = 01012. Then k1 =

10102 and k2 = 0100 ⊕ 0011 = 01112.

The CMAC tag generation process is as follows:

1. Divide message into b-bit blocks m = m1 ∥ ... ∥ mn−1 ∥ mn where m1, ..., mn−1 are
complete blocks. (The empty message is treated as 1 incomplete block.)
2. If mn is a complete block then mn′ = k1 ⊕ mn else mn′ = k2 ⊕ (mn∥ 10...02).
3. Let c0 = 00…02.
4. For i = 1, ..., n-1, calculate ci = Ek(ci−1 ⊕ mi).
5. cn = Ek(cn−1 ⊕ mn′)
6. Output t = msbℓ(cn).

The verification process is as follows:

1. Use the above algorithm to generate the tag.

2. Check that the generated tag is equal to the received tag.

DIGITAL SIGNATURE
The most important development from the work on public-key cryptography is
the digital signature. Message authentication protects two parties who exchange
messages from any third party. However, it does not protect the two parties against each
116
other. A digital signature is analogous to the handwritten signature, and provides a set of
security capabilities that would be difficult to implement in any other way. It must have
the following properties: • It must verify the author and the date and time of the signature
• It must to authenticate the contents at the time of the signature • It must be verifiable
by third parties, to resolve disputes Thus, the digital signature function includes the
authentication function. A variety of approaches has been proposed for the digital
signature function. These approaches fall into two categories: direct and arbitrated.
Direct Digital Signature
Direct Digital Signatures involve the direct application of public-key algorithms involving
only the communicating parties. A digital signature may be formed by encrypting the
entire message with the sender’s private key, or by encrypting a hash code of the message
with the sender’s private key. Confidentiality can be provided by further encrypting the
entire message plus signature using either public or private key schemes. It is important
to perform the signature function first and then an outer confidentiality function, since in
case of dispute, some third party must view the message and its signature. But these
approaches are dependent on the security of the sender’s private-key. Will have problems
if it is lost/stolen and signatures forged. Need time-stamps and timely key revocation.
Arbitrated Digital Signature
The problems associated with direct digital signatures can be addressed by using an
arbiter, in a variety of possible arrangements. The arbiter plays a sensitive and crucial
role in this sort of scheme, and all parties must have a great deal of trust that the
arbitration mechanism is working properly. These schemes can be implemented with
either private or public-key algorithms, and the arbiter may or may not see the actual
message contents. Using Conventional encryption
X A : M || E ( Kxa ,[ IDx || H (M) ] )
A Y : E( Kay ,[ IDx || M || E (Kxa ,[ IDx ||H(M))] ) || T ])
It is assumed that the sender X and the arbiter A share a secret key Kxa and that A and
Y share secret key Kay. X constructs a message M and computes its hash value H(m) . Then
X transmits the message plus a signature to A. the signature consists of an identifier IDx
of X plus the hash value, all encrypted using Kxa.
A decrypts the signature and checks the hash value to validate the message. Then A
transmits a message to Y, encrypted with Kay. The message includes IDx, the original
message from X, the signature, and a timestamp.
117
 Arbiter sees message
Problem : the arbiter could form an alliance with sender to deny a signed message, or
with the receiver to forge the sender’s signature.

Using Public Key Encryption

X A : IDx ||E( PRx,[ IDx|| E ( PUy, E( PRx, M))])
A Y : E( PRa, [ IDx ||E (PUy, E (PRx, M))|| T] )
X double encrypts a message M first with X’s private key,PRx, and then with Y’s public
key, PUy. This is a signed, secret version of the message. This signed message, together
with X’s identifier , is encrypted again with PRx and, together with IDx, is sent to A. The
inner, double encrypted message is secure from the arbiter (and everyone else except Y)

A can decrypt the outer encryption to assure that the message must have come from
X (because only X has PRx). Then A transmits a message to Y, encrypted with PRa. The
message includes IDx, the double encrypted message, and a timestamp.

Arbiter does not see message

Digital Signature Standard (DSS)

The National Institute of Standards and Technology (NIST) has published Federal
Information Processing Standard FIPS 186, known as the Digital Signature Standard
(DSS). The DSS makes use of the Secure Hash Algorithm (SHA) and presents a new digital
signature technique, the Digital Signature Algorithm (DSA). The DSS uses an algorithm
that is designed to provide only the digital signature function and cannot be used for
encryption or key exchange, unlike RSA.
The RSA approach is shown below. The message to be signed is input to a hash
function that produces a secure hash code of fixed length. This hash code is then
encrypted using the sender's private key to form the signature. Both the message and the
signature are then transmitted.

118
 The recipient takes the message and produces a hash code. The recipient also
decrypts the signature using the sender's public key. If the calculated hash code matches
the decrypted signature, the signature is accepted as valid. Because only the sender
knows the private key, only the sender could have produced a valid signature.
The DSS approach also makes use of a hash function. The hash code is provided as
input to a signature function along with a random number k generated for this particular
signature. The signature function also depends on the sender's private key (PRa) and a
set of parameters known to a group of communicating principals. We can consider this
set to constitute a global public key (PUG).The result is a signature consisting of two
components, labeled s and r.

At the receiving end, the hash code of the incoming message is generated. This plus
the signature is input to a verification function. The verification function also depends on
the global public key as well as the sender's public key (PUa), which is paired with the
sender's private key. The output of the verification function is a value that is equal to the
signature component r if the signature is valid. The signature function is such that only
the sender, with knowledge of the private key, could have produced the valid signature.

KNAPSACK ALGORITHM

Public-Key cryptography was invented in the 1970s by Whitfield Diffie, Martin Hellman
and Ralph Merkle.

Public-key cryptography needs two keys. One key tells you how to encrypt (or code) a
message and this is "public" so anyone can use it. The other key allows you to decode
(or decrypt) the message. This decryption code is kept secret (or private) so only the
person who knows the key can decrypt the message. It is also possible for the person

119
with the private key to encrypt a message with the private key, then anyone holding the
public key can decrypt the message, although this seems to be of little use if you are
trying to keep something secret!

The First General Public-Key Algorithm used what we call the Knapsack Algorithm.
Although we now know that this algorithm is not secure we can use it to look at how
these types of encryption mechanisms work.

The knapsack algorithm works like this:

Imagine you have a set of different weights which you can use to make any total weight
that you need by adding combinations of any of these weights together.
Let us look at an example:
Imagine you had a set of weights 1, 6, 8, 15 and 24. To pack a knapsack weighing 30, you
could use weights 1, 6, 8 and 15. It would not be possible to pack a knapsack that weighs
17 but this might not matter.
You might represent the weight 30 by the binary code 11110 (one 1, one 6, one 8, one
15 and no 24).
Example:

Plain text 10011 11010 01011 00000

Knapsack 1 6 8 15 24 1 6 8 15 24 1 6 8 15 24 1 6 8 15 24

Cipher text 1 + 15 + 24 = 40 1 + 6 + 15 = 22 6 + 15 + 24 = 45 0=0

What total weights is it possible to make?

So, if someone sends you the code 38 this can only have come from the plain text 01101.
When the Knapsack Algorithm is used in public key cryptography, the idea is to create
two different knapsack problems. One is easy to solve, the other not. Using the easy
knapsack, the hard knapsack is derived from it. The hard knapsack becomes the public
key. The easy knapsack is the private key. The public key can be used to encrypt messages,
but cannot be used to decrypt messages. The private key decrypts the messages.

120
The Superincreasing Knapsack Problem

An easy knapsack problem is one in which the weights are in a superincreasing

sequence. A superincreasing sequence is one in which the next term of the sequence is
greater than the sum of all preceding terms. For example, the set {1, 2, 4, 9, 20, 38} is
superincreasing, but the set {1, 2, 3, 9, 10, 24} is not because 10 < 1+2+3+9.
It is easy to solve a superincreasing knapsack. Simply take the total weight of the
knapsack and compare it with the largest weight in the sequence. If the total weight is
less than the number, then it is not in the knapsack. If the total weight is greater then
the number, it is in the knapsack. Subtract the number from the total, and compare with
the next highest number. Keep working this way until the total reaches zero. If the total
doesn't reach zero, then there is no solution.

So, for example, if you have a knapsack that weighs 23 that has been made from the
weights of the superincreasing series {1, 2, 4, 9, 20, 38} then it does not contain the
weight 38 (as 38 > 23)
but it does contain the weight 20; leaving 3;
which does not contain the weight 9 still leaving 3;
which does not contain the weight 4 still leaving 3;
which contains the weight 2, leaving 1; which contains the weight 1.
The binary code is therefore 110010.

It is much harder to decrypt a non-superincreasing knapsack problem. Give a friend a

non-superincreasing knapsack and a total and see why this is the case.
One algorithm that uses a superincreasing knapsack for the private (easy) key and a
non-superincreasing knapsack for the public key was created by Merkle and Hellman
They did this by taking a superincreasing knapsack problem and converting it into a
non-superincreasing one that could be made public, using modulus arithmetic.

Making the Public Key

To produce a normal knapsack sequence, take a superincreasing sequence; e.g. {1, 2, 4,

10, 20, 40}. Multiply all the values by a number, n, modulo m. The modulus should be a
number greater than the sum of all the numbers in the sequence, for example, 110. The

121
multiplier should have no factors in common with the modulus. So let's choose 31. The
normal knapsack sequence would be:

1×31 mod(110) = 31
2×31 mod(110) = 62
4×31 mod(110) = 14
10×31 mod(110) = 90
20×31 mod(110) = 70
40×31 mod(110) = 30

So the public key is: {31, 62, 14, 90, 70, 30} and
the private key is {1, 2, 4, 10, 20.40}.

Let's try to send a message that is in binary code:

100100111100101110
The knapsack contains six weights so we need to split the message into groups of six:
100100
111100
101110
This corresponds to three sets of weights with totals as follows
100100 = 31 + 90 = 121
111100 = 31+62+14+90 = 197
101110 = 31+14+90+70 =205
So the coded message is 121 197 205.

Now the receiver has to decode the message...

The person decoding must know the two numbers 110 and 31 (the modulus and the
multiplier). Let's call the modulus "m" and the number you multiply by "n".
We need n−1, which is a multiplicative inverse of n mod m, i.e. n(n−1) = 1 mod m

In this case I have calculated n−1 to be 71.

122
All you then have to do is multiply each of the codes 71 mod 110 to find the total in the
knapsack which contains {1, 2, 4, 10, 20, 40} and hence to decode the message.
The coded message is 121 197 205:

121×71 mod(110) = 11 = 100100

197×71 mod(110) = 17 = 111100
205×71 mod(110) = 35 = 101110

The decoded message is:

100100111100101110.
Just as I thought!

Simple and short knapsack codes are far too easy to break to be of any real use. For a
knapsack code to be reasonably secure it would need well over 200 terms each of length
200 bits.

AUTHENTICATION APPLICATIONS

KERBEROS

Kerberos is an authentication service developed as part of Project Athena at MIT. It

addresses the threats posed in an open distributed environment in which users at
workstations wish to access services on servers distributed throughout the network.
Some of these threats are:
 A user may gain access to a particular workstation and pretend to be another user
operating from that workstation.

 A user may alter the network address of a workstation so that the requests sent
from the altered workstation appear to come from the impersonated workstation.

 A user may eavesdrop on exchanges and use a replay attack to gain entrance to a
server or to disrupt operations.

Two versions of Kerberos are in current use: Version-4 and Version-5. The first published
report on Kerberos listed the following requirements:

123
Secure: A network eavesdropper should not be able to obtain the necessary information
to impersonate a user. More generally, Kerberos should be strong enough that a potential
opponent does not find it to be the weak link.
Reliable: For all services that rely on Kerberos for access control, lack of availability of
the Kerberos service means lack of availability of the supported services. Hence, Kerberos
should be highly reliable and should employ a distributed server architecture, with one
system able to back up another.
Transparent: Ideally, the user should not be aware that authentication is taking place,
beyond the requirement to enter a password.
Scalable: The system should be capable of supporting large numbers of clients and
servers. This suggests a modular, distributed architecture

Two versions of Kerberos are in common use: Version 4 is most widely used version.
Version 5 corrects some of the security deficiencies of Version 4. Version 5 has been
issued as a draft Internet Standard (RFC 1510)

KERBEROS VERSION 4

1.) SIMPLE DIALOGUE:

MORE SECURE DIALOGUE

124
The Version 4 Authentication Dialogue The full Kerberos v4 authentication dialogue is
shown here divided into 3 phases.

125
 There is a problem of captured ticket-granting tickets and the need to determine
that the ticket presenter is the same as the client for whom the ticket was issued. An
efficient way of doing this is to use a session encryption key to secure information.
Message (1) includes a timestamp, so that the AS knows that the message is timely.
Message (2) includes several elements of the ticket in a form accessible to C. This enables
C to confirm that this ticket is for the TGS and to learn its expiration time. Note that the
ticket does not prove anyone's identity but is a way to distribute keys securely. It is the
authenticator that proves the client's identity. Because the authenticator can be used only
once and has a short lifetime, the threat of an opponent stealing both the ticket and the
authenticator for presentation later is countered. C then sends the TGS a message that
includes the ticket plus the ID of the requested service (message 3). The reply from the
TGS, in message (4), follows the form of message (2). C now has a reusable service-
granting ticket for V. When C presents this ticket, as shown in message (5), it also sends
an authenticator.

The server can decrypt the ticket, recover the session key, and decrypt the authenticator.
If mutual authentication is required, the server can reply as shown in message (6).

126
Overview of Kerberos

Kerberos Realms A full-service Kerberos environment consisting of a Kerberos server,

a number of clients, and a number of application servers is referred to as a Kerberos
realm. A Kerberos realm is a set of managed nodes that share the same Kerberos
database, and are part of the same administrative domain. If have multiple realms, their
Kerberos servers must share keys and trust each other.

The following figure shows the authentication messages where service is being requested
from another domain. The ticket presented to the remote server indicates the realm in
which the user was originally authenticated. The server chooses whether to honor the
remote request. One problem presented by the foregoing approach is that it does not
scale well to many realms, as each pair of realms need to share a key.

127
The limitations of Kerberos version-4 are categorised into two types:
Environmental shortcomings of Version 4:
– Encryption system dependence: DES

– Internet protocol dependence

– Ticket lifetime

– Authentication forwarding

– Inter-realm authentication
Technical deficiencies of Version 4:
– Double encryption

– Session Keys

– Password attack

KERBEROS VERSION 5
Kerberos Version 5 is specified in RFC 1510 and provides a number of improvements
over version 4 in the areas of environmental shortcomings and technical deficiencies. It
includes some new elements such as:
Realm: Indicates realm of the user

Options
Times

128
– From: the desired start time for the ticket

– Till: the requested expiration time

– Rtime: requested renew-till time

Nonce: A random value to assure the response is fresh
The basic Kerberos version 5 authentication dialogue is shown here First, consider the
authentication service exchange.

Message (1) is a client request for a ticket-granting ticket. Message (2) returns a ticket-
granting ticket, identifying information for the client, and a block encrypted using the
encryption key based on the user's password. This block includes the session key to be
used between the client and the TGS. Now compare the ticket-granting service
exchange for versions 4 and 5. See that message (3) for both versions includes an
authenticator, a ticket, and the name of the requested service. In addition, version 5
includes requested times and options for the ticket and a nonce, all with functions similar
to those of message (1). The authenticator itself is essentially the same as the one used in
version 4. Message (4) has the same structure as message (2), returning a ticket plus
information needed by the client, the latter encrypted with the session key now shared
by the client and the TGS. Finally, for the client/server authentication exchange, several
new features appear in version 5, such as a request for mutual authentication. If required,
the server responds with message (6) that includes the timestamp from the

129
authenticator. The flags field included in tickets in version 5 supports expanded
functionality compared to that available in version 4.
Advantages of Kerberos:
User's passwords are never sent across the network, encrypted or in plain text

Secret keys are only passed across the network in encrypted form

Client and server systems mutually authenticate

It limits the duration of their users' authentication.

Authentications are reusable and durable

Kerberos has been scrutinized by many of the top programmers, cryptologists and
security experts in the industry

X.509 AUTHENTICATION SERVICE

ITU-T recommendation X.509 is part of the X.500 series of recommendations that
define a directory service. The directory is, in effect, a server or distributed set of servers
that maintains a database of information about users. The information includes a
mapping from user name to network address, as well as other attributes and information
about the users. X.509 is based on the use of public-key cryptography and digital
signatures. The heart of the X.509 scheme is the public-key certificate associated with
each user. These user certificates are assumed to be created by some trusted certification
authority (CA) and placed in the directory by the CA or by the user. The directory server
itself is not responsible for the creation of public keys or for the certification function; it
merely provides an easily accessible location for users to obtain certificates.
The general format of a certificate is shown above, which includes the following
elements:
version 1, 2, or 3
serial number (unique within CA) identifying certificate
signature algorithm identifier
issuer X.500 name (CA)
period of validity (from - to dates)
subject X.500 name (name of owner)
subject public-key info (algorithm, parameters, key)
issuer unique identifier (v2+)

130
 subject unique identifier (v2+)
extension fields (v3)
signature (of hash of all fields in certificate)

The standard uses the following notation to define a certificate:

CA<<A>> = CA {V, SN, AI, CA, TA, A, Ap}

Where Y<<X>>= the certificate of user X issued by certification authority Y

Y {I} == the signing of I by Y. It consists of I with an encrypted hash code appended

User certificates generated by a CA have the following characteristics:

Any user with CA’s public key can verify the user public key that was certified

No party other than the CA can modify the certificate without being detected

because they cannot be forged, certificates can be placed in a public directory

Scenario: Obtaining a User Certificate If both users share a common CA then they are
assumed to know its public key. Otherwise CA's must form a hierarchy and use
certificates linking members of hierarchy to validate other CA's. Each CA has certificates
for clients (forward) and parent (backward). Each client trusts parents certificates. It

131
enables verification of any certificate from one CA by users of all other CAs in hierarchy.
A has obtained a certificate from the CA X1. B has obtained a certificate from the CA X2. A
can read the B’s certificate but cannot verify it. In order to solve the problem ,the Solution:
X1<<X2> X2<<B>>. A obtain the certificate of X2 signed by X1 from directory. obtain
X2’s public key. A goes back to directory and obtain the certificate of B signed by X2.
obtain B’s public key securely. The directory entry for each CA includes two types of
certificates: Forward certificates: Certificates of X generated by other CAs Reverse
certificates: Certificates generated by X that are the certificates of other CAs

X.509 CA Hierarchy

A acquires B certificate using chain:

X<<W>>W<<V>>V<<Y>>Y<<Z>> Z<<B>>
B acquires A certificate using chain:
Z<<Y>>Y<<V>>V<<W>>W<<X>> X<<A>>

Revocation of Certificates Typically, a new certificate is issued just before the

expiration of the old one. In addition, it may be desirable on occasion to revoke a
certificate before it expires, for one of the following reasons:

132
 The user's private key is assumed to be compromised.

The user is no longer certified by this CA.

The CA's certificate is assumed to be compromised.

Each CA must maintain a list consisting of all revoked but not expired certificates issued
by that CA, including both those issued to users and to other CAs. These lists should also
be posted on the directory. Each certificate revocation list (CRL) posted to the
directory is signed by the issuer and includes the issuer's name, the date the list was
created, the date the next CRL is scheduled to be issued, and an entry for each revoked
certificate. Each entry consists of the serial number of a certificate and revocation date
for that certificate. Because serial numbers are unique within a CA, the serial number is
sufficient to identify the certificate.

AUTHENTICATION PROCEDURES
X.509 also includes three alternative authentication procedures that are intended for use
across a variety of applications. All these procedures make use of public-key signatures. It is
assumed that the two parties know each other's public key, either by obtaining each other's
certificates from the directory or because the certificate is included in the initial message
from each side. 1. One-Way Authentication: One way authentication involves a single transfer
of information from one user (A) to another (B), and establishes the details shown above.
Note that only the identity of the initiating entity is verified in this process, not that of the
responding entity. At a minimum, the message includes a timestamp ,a nonce, and the identity
of B and is signed with A’s private key. The message may also include information to be
conveyed, such as a session key for B.

Two-Way Authentication: Two-way authentication thus permits both parties in a

communication to verify the identity of the other, thus additionally establishing the above
details. The reply message includes the nonce from A, to validate the reply. It also includes
a timestamp and nonce generated by B, and possible additional information for A.

133
Three-Way Authentication: Three-Way Authentication includes a final message from A to
B, which contains a signed copy of the nonce, so that timestamps need not be checked, for
use when synchronized clocks are not available.

BIOMETRIC AUTHENTICATION
Biometric authentication is a type of system that relies on the unique biological
characteristics of individuals to verify identity for secure access to electronic systems.

Biometric verification is considered a subset of biometric authentication.

The biometric technologies involved are based on the ways in which individuals can be
uniquely identified through one or more distinguishing biological traits, such as
fingerprints, hand geometry, earlobe geometry, retina and iris patterns, voice waves,
keystroke dynamics, DNA and signatures. Biometric authentication is the application of
that proof of identity as part of a process validating a user for access to a
system. Biometric technologies are used to secure a wide range of electronic
communications, including enterprise security, online commerce and banking -- even just
logging in to a computer or smartphone.

Biometric authentication systems compare the current biometric data capture to stored,
confirmed authentic data in a database. If both samples of the biometric data match,
134
authentication is confirmed and access is granted. The process is sometimes part of
amultifactor authentication system. For example, a smartphone user might log on with
his personal identification number (PIN) and then provide an iris scan to complete the
authentication process.

Types of biometric authentication technologies:

Retina scans produce an image of the blood vessel pattern in the light-sensitive surface
lining the individual's inner eye.

Iris recognition is used to identify individuals based on unique patterns within the ring-
shaped region surrounding the pupil of the eye.

Fingerscanning, the digital version of the ink-and-paper fingerprinting process, works

with details in the pattern of raised areas and branches in a human finger image.

Finger vein ID is based on the unique vascular pattern in an individual's finger.

Facial recognition systems work with numeric codes called faceprints, which identify 80
nodal points on a human face.

Voice identification systems rely on characteristics created by the shape of the speaker's
mouth and throat, rather than more variable conditions.

Once seen mostly in spy movies (where it might be used to protect access to a top-secret
military lab, for example), biometric authentication is becoming relatively
commonplace. In addition to the security provided by hard-to-fake individual biological
traits, the acceptance of biometric verification has also been driven by convenience: One
can’t easily forget or lose ones biometrics.

The history of biometric verification:

The oldest known use of biometric verification is fingerprinting. Thumbprints made on
clay seals were used as a means of unique identification as far back as ancient China.
Modern biometric verification has become almost instantaneous, and is increasingly
accurate with the advent of computerized databases and the digitization of analog data.
135
The market for biometrics products is still too fractured to name specific top providers.
The physical characteristics of the biometrics products available today vary from the
mundane, such as fingerprinting, to the esoteric, like typing speeds and
electrophysiological signals.

Until recently, biometrics was typically used at a physical security level – protecting
facilities at military bases or impenetrable bank vaults, for example. But, because single-
factor authentication methods are easy to break, companies have started looking to
two-factor solutions, like biometrics.

However, the following five fundamental barriers may limit the growth of biometric
authentication:

1. Biometrics can be complicated and costly to deploy. All biometric deployments

require installation of their own hardware and application servers.

2. The market is still fractured. Should you buy a fingerprint reader, a voice
recognition system or an iris scanner? Since each product differs greatly in its
approach and installation, it is difficult to compare them during a typical company
bid process.

3. Biometric data is like any other data. It sits on servers, which are bait forhackers if
not properly hardened and secured. Therefore, when reviewing any biometric
product, make sure it transmits data securely, meaningencrypted, from the
biometric reader back to the authenticating server. And, make sure the
authenticating server has been hardened, patched and protected.

4. Biometric readers are prone to errors. Fingerprints can smudge, faces and voices
can be changed and all of them can be misread, blocking a legitimate user, or
permitting access to an unauthorized or malicious user.

5. Difficulties with user acceptance. Properly trained employees may be willing to use
biometrics devices, but customers, like those logging on to your Web site, may be
more reluctant to use – or worse, forced to purchase – a device that's difficult to use
or makes doing business, such as banking, on your site, a hassle instead of a

136
 convenience. And both your employees and customers may be squeamish about
exposing their eyes to devices like iris scanners, even if they appear harmless.

Despite these issues, biometrics is slowly gaining acceptance for two-factor

authentication purposes. The products are getting better, lighter and easier to use. Error
rates are going down, and fingerprint readers installed on tokens and laptops are
getting smaller and less intrusive. And, like the rest of the security product industry,
vendors will eventually merge and consolidate, uniting a fractured market, which will
make it easier to choose a product that suits your business needs.

137
 UNIT-4
Email Privacy: Pretty Good Privacy (PGP) and S/MIME. IP Security: IP Security Overview,
IP Security Architecture, Authentication Header, Encapsulating Security Payload,
Combining Security Associations and Key Management.

PRETTY GOOD PRIVACY

In virtually all distributed environments, electronic mail is the most heavily used
network-based application. But current email services are roughly like "postcards”,
anyone who wants could pick it up and have a look as it’s in transit or sitting in the
recipients mailbox. PGP provides a confidentiality and authentication service that can be
used for electronic mail and file storage applications. With the explosively growing
reliance on electronic mail for every conceivable purpose, there grows a demand for
authentication and confidentiality services. The Pretty Good Privacy (PGP) secure email
program, is a remarkable phenomenon, has grown explosively and is now widely used.
Largely the effort of a single person, Phil Zimmermann, who selected the best available
crypto algorithms to use & integrated them into a single program, PGP provides a
confidentiality and authentication service that can be used for electronic mail and file
storage applications. It is independent of government organizations and runs on a wide
range of systems, in both free & commercial versions. There are five important services in
PGP
Authentication (Sign/Verify)
Confidentiality (Encryption/Decryption)
Compression
Email compatibility
Segmentation and Reassembly
The last three are transparent to the user

138
PGP Notations:

Ks =session key used in

symmetric encryption
scheme
PRa =private key of user A, used in
public-key encryption
scheme
PUa =public key of user A, used in
public-key encryption
scheme
EP = public-key encryption
DP = public-key decryption
EC = symmetric encryption
DC = symmetric decryption
H = hash function
|| = concatenation
Z = compression using ZIP
algorithm
R64 = conversion to radix 64
ASCII format

PGP Operation- Authentication

139
1. sender creates message

2. use SHA-1 to generate 160-bit hash of message

3. signed hash with RSA using sender's private key, and is attached to message

4. receiver uses RSA with sender's public key to decrypt and recover hash code

5. receiver verifies received message using hash of it and compares with decrypted hash
code

PGP Operation- Confidentiality

Sender:
1. Generates message and a random number (session key) only for this message
2. Encrypts message with the session key using AES, 3DES, IDEA or CAST-128
3. Encrypts session key itself with recipient’s public key using RSA
4. Attaches it to message

Receiver:
1. Recovers session key by decrypting using his private key
2. Decrypts message using the session key
Confidentiality service provides no assurance to the receiver as to the identity of sender
(i.e. no authentication). Only provides confidentiality for sender that only the recipient
can read the message (and no one else)

140
PGP Operation – Confidentiality & Authentication

can use both services on same message o create signature & attach to message
o encrypt both message & signature
o attach RSA/ElGamal encrypted session key
o is called authenticated confidentiality

PGP Operation – Compression

As a default, PGP compresses the message after applying the signature but before
encryption. This has the benefit of saving space both for e-mail transmission and for file
storage. The placement of the compression algorithm, indicated by Z for compression and
Z-1 for decompression is critical. The compression algorithm used is ZIP.
The signature is generated before compression for two reasons:

1. so that one can store only the uncompressed message together with signature for later
verification

2. Applying the hash function and signature after compression would constrain all PGP
implementations to the same version of the compression algorithm as the PGP
compression algorithm is not deterministic

Message encryption is applied after compression to strengthen cryptographic

security. Because the compressed message has less redundancy than the original
plaintext, cryptanalysis is more difficult.
PGP Operation – Email Compatibility
When PGP is used, at least part of the block to be transmitted is encrypted, and thus
consists of a stream of arbitrary 8-bit octets. However many electronic mail systems only
permit the use of ASCII text. To accommodate this restriction, PGP provides the service
141
of converting the raw 8-bit binary stream to a stream of printable ASCII characters. It uses
radix-64 conversion, in which each group of three octets of binary data is mapped into
four ASCII characters. This format also appends a CRC to detect transmission errors. The
use of radix 64 expands a message by 33%, but still an overall compression of about one-
third can be achieved.
PGP Operation - Segmentation/Reassembly
E-mail facilities often are restricted to a maximum message length. For example, many of
the facilities accessible through the Internet impose a maximum length of 50,000 octets.
Any message longer than that must be broken up into smaller segments, each of which is
mailed separately. To accommodate this restriction, PGP automatically subdivides a
message that is too large into segments that are small enough to send via e-mail. The
segmentation is done after all of the other processing, including the radix-64 conversion.
Thus, the session key component and signature component appear only once, at the
beginning of the first segment. Reassembly at the receiving end is required before
verifying signature or decryption

PGP Operations – Summary

142
PGP Message Format
A message consists of three components: the message component, a signature (optional),
and a session key component (optional). The message component includes the actual data
to be stored or transmitted, as well as a filename and a timestamp that specifies the time
of creation. The signature component includes the following:
Timestamp: The time at which the signature was made.
Message digest: The 160-bit SHA-1 digest, encrypted with the sender's private
signature key.
Leading two octets of message digest: To enable the recipient to determine if the
correct public key was used to decrypt the message digest for authentication, by
comparing this plaintext copy of the first two octets with the first two octets of the
decrypted digest. These octets also serve as a 16-bit frame check sequence for the
message.
Key ID of sender's public key: Identifies the public key that should be used to decrypt
the message digest and, hence, identifies the private key that was used to encrypt the
message digest

143
The session key component includes the session key and the identifier of the recipient's
public key that was used by the sender to encrypt the session key. The entire block is
usually encoded with radix-64 encoding.

PGP Message Transmission and Reception

Message transmission

The following figure shows the steps during message transmission assuming that the
message is to be both signed and encrypted.

144
The sending PGP entity performs the following steps:

Signing the message

a. PGP retrieves the sender's private key from the private-key ring using your_userid as
an index. If your_userid was not provided in the command, the first private key on the
ring is retrieved.
b. PGP prompts the user for the passphrase to recover the unencrypted private key.
c. The signature component of the message is constructed
Encrypting the message
a. PGP generates a session key and encrypts the message.
b. PGP retrieves the recipient's public key from the public-key ring using her_userid as an
index.
c. The session key component of the message is constructed.
Message Reception

The receiving PGP entity performs the following steps:

Decrypting the message

a. PGP retrieves the receiver's private key from the private-key ring, using the Key ID field
in the session key component of the message as an index.
b. PGP prompts the user for the passphrase to recover the unencrypted private key.
c. PGP then recovers the session key and decrypts the message.

145
Authenticating the message
a. PGP retrieves the sender's public key from the public-key ring, using the Key ID field in
the signature key component of the message as an index.
b. PGP recovers the transmitted message digest.
c. PGP computes the message digest for the received message and compares it to the
transmitted message digest to authenticate.

S/MIME
S/MIME (Secure/Multipurpose Internet Mail Extension) is a security enhancement to the
MIME Internet e-mail format standard, which in turn provided support for varying
content types and multi-part messages over the text only support in the original Internet
RFC822 email standard. MIME allows encoding of binary data to textual form for
transport over traditional RFC822 email systems. S/MIME is defined in a number of
documents, most importantly RFCs 3369, 3370, 3850 and 3851 and S/MIME support is
now included in many modern mail agents.
RFC 822
RFC 822 defines a format for text messages that are sent using electronic mail and it has
been the standard for Internet-based text mail message. The overall structure of a
message that conforms to RFC 822 is very simple. A message consists of some number of
header lines (the header) followed by unrestricted text (the body). The header is
separated from the body by a blank line. A header line usually consists of a keyword,
followed by a colon, followed by the keyword's arguments; the format allows a long line
to be broken up into several lines. The most frequently used keywords are From, To,
Subject, and Date.

Multipurpose Internet Mail Extensions

MIME is an extension to the RFC 822 framework that is intended to address some of the
problems and limitations of the use of SMTP (Simple Mail Transfer Protocol) or some
other mail transfer protocol and RFC 822 for electronic mail. Problems with RFC 822
and SMTP
• Executable files or other binary objects must be converted into ASCII. Various schemes
exist (e.g., Unix UUencode), but a standard is needed
146
• Text data that includes special characters (e.g., Hungarian text) cannot be transmitted
as SMTP is limited to 7-bit ASCII
• Some servers reject mail messages over a certain size
• Some common problems exist with the SMTP implementations which do not adhere
completely to the SMTP standards defined in RFC 821. They are:
delete, add, or reorder CR and LF characters
truncate or wrap lines longer than 76 characters
remove trailing white space (tabs and spaces)
pad lines in a message to the same length
convert tab characters into multiple spaces

MIME is intended to resolve these problems in a manner that is compatible with existing
RFC 822 implementations and the specification is provided in RFC’s 2045 through 2049.

The MIME specification includes the following elements:

1. Five new message header fields are defined, which provide information about the body
of the message.
2. A number of content formats are defined, thus standardizing representations that
support multimedia electronic mail.
3. Transfer encodings are defined that protect the content from alteration by the mail
system.

MIME - New header fields The five header fields defined in MIME are as follows:
• MIME-Version: Must have the parameter value 1.0. This field indicates that the message
conforms to RFCs 2045 and 2046.
• Content-Type: Describes the data contained in the body with sufficient detail that the
receiving user agent can pick an appropriate agent or mechanism to represent the data
to the user or otherwise deal with the data in an appropriate manner.
• Content-Transfer-Encoding: Indicates the type of transformation that has been used to
represent the body of the message in a way that is acceptable for mail transport.
• Content-ID: Used to identify MIME entities uniquely in multiple contexts.
• Content-Description: A text description of the object with the body; this is useful when
the object is not readable (e.g., audio data).

147
MIME Content Types The bulk of the MIME specification is concerned with the definition
of a variety of content types. There are seven different major types of content and a total
of 15 subtypes. In general, a content type declares the general type of data, and the
subtype specifies a particular format for that type of data. For the text type of body, the
primary subtype is plain text, which is simply a string of ASCII characters or ISO 8859
characters. The enriched subtype allows greater formatting flexibility. The multipart type
indicates that the body contains multiple, independent parts. The Content-Type header
field includes a parameter called boundary that defines the delimiter between body parts.
This boundary should not appear in any parts of the message. Each boundary starts on a
new line and consists of two hyphens followed by the boundary value. The final boundary,
which indicates the end of the last part, also has a suffix of two hyphens. Within each part,
there may be an optional ordinary MIME header. There are four subtypes of the multipart
type, all of which have the same overall syntax.

The message type provides a number of important capabilities in MIME. The

message/rfc822 subtype indicates that the body is an entire message, including header
148
and body. Despite the name of this subtype, the encapsulated message may be not only a
simple RFC 822 message, but also any MIME message. The message/partial subtype
enables fragmentation of a large message into a number of parts, which must be
reassembled at the destination. For this subtype, three parameters are specified in the
Content-Type: Message/Partial field: an id common to all fragments of the same message,
a sequence number unique to each fragment, and the total number of fragments. The
message/external-body subtype indicates that the actual data to be conveyed in this
message are not contained in the body. Instead, the body contains the information needed
to access the data. The application type refers to other kinds of data, typically either
uninterpreted binary data or information to be processed by a mail-based application.

MIME Transfer Encodings The other major component of the MIME specification, in
addition to content type specification, is a definition of transfer encodings for message
bodies. The objective is to provide reliable delivery across the largest range of
environments.

The MIME standard defines two methods of encoding data. The Content-Transfer-
Encoding field can actually take on six values. Three of these values (7bit, 8bit, and
binary) indicate that no encoding has been done but provide some information about the
nature of the data. Another Content-Transfer-Encoding value is x-token, which indicates
that some other encoding scheme is used, for which a name is to be supplied. The two
actual encoding schemes defined are quoted-printable and base64. Two schemes are
defined to provide a choice between a transfer technique that is essentially human
149
readable and one that is safe for all types of data in a way that is reasonably compact. The
quoted-printable transfer encoding is useful when the data consists largely of octets that
correspond to printable ASCII characters. In essence, it represents nonsafe characters by
the hexadecimal representation of their code and introduces reversible (soft) line breaks
to limit message lines to 76 characters. The base64 transfer encoding, also known as
radix-64 encoding, is a common one for encoding arbitrary binary data in such a way as
to be invulnerable to the processing by mail transport programs.
Canonical Form
An important concept in MIME and S/MIME is that of canonical form. Canonical form is a
format, appropriate to the content type, that is standardized for use between systems.
This is in contrast to native form, which is a format that may be peculiar to a particular
system.

150
S/MIME Functionality
S/MIME has a very similar functionality to PGP. Both offer the ability to sign and/or
encrypt messages.
Functions
S/MIME provides the following functions:
• Enveloped data: This consists of encrypted content of any type and encrypted-content
encryption keys for one or more recipients.
• Signed data: A digital signature is formed by taking the message digest of the content
to be signed and then encrypting that with the private key of the signer. The content plus
signature are then encoded using base64 encoding. A signed data message can only be
viewed by a recipient with S/MIME capability.
• Clear-signed data: As with signed data, a digital signature of the content is formed.
However, in this case, only the digital signature is encoded using base64. As a result,
recipients without S/MIME capability can view the message content, although they
cannot verify the signature.
• Signed and enveloped data: Signed-only and encrypted-only entities may be nested,
so that encrypted data may be signed and signed data or clear-signed data may be
encrypted.

IP SECURITY OVERVIEW
Definition: Internet Protocol security (IPSec) is a framework of open standards for
protecting communications over Internet Protocol (IP) networks through the use of
cryptographic security services. IPSec supports network-level peer authentication, data
origin authentication, data integrity, data confidentiality (encryption), and replay
protection.
Need for IPSec
In Computer Emergency Response Team (CERT)’s 2001 annual report it listed 52,000
security incidents in which most serious types of attacks included IP spoofing, in which
intruders create packets with false IP addresses and exploit applications that use
authentication based on IP and various forms of eavesdropping and packet sniffing, in
which attackers read transmitted information, including logon information and database

151
contents. In response to these issues, the IAB included authentication and encryption as
necessary security features in the next-generation IP i.e. IPv6.
Applications of IPSec
IPSec provides the capability to secure communications across a LAN, across private and
public wide area networks (WAN’s), and across the Internet.
• Secure branch office connectivity over the Internet: A company can build a secure
virtual private network over the Internet or over a public WAN. This enables a business
to rely heavily on the Internet and reduce its need for private networks, saving costs and
network management overhead.
• Secure remote access over the Internet: An end user whose system is equipped with
IP security protocols can make a local call to an Internet service provider (ISP) and gain
secure access to a company network. This reduces the cost of toll charges for travelling
employees and telecommuters.
• Establishing extranet and intranet connectivity with partners: IPSec can be used to
secure communication with other organizations, ensuring authentication and
confidentiality and providing a key exchange mechanism.
• Enhancing electronic commerce security: Even though some Web and electronic
commerce applications have built-in security protocols, the use of IPSec enhances that
security.
The principal feature of IPSec enabling it to support varied applications is that it can
encrypt and/or authenticate all traffic at IP level. Thus, all distributed applications,
including remote logon, client/server, e-mail, file transfer, Web access, and so on, can be
secured.

The following figure shows a typical scenario of IPSec usage. An organization maintains LANs
at dispersed locations. Non secure IP traffic is conducted on each LAN.

152
The IPSec protocols operate in networking devices, such as a router or firewall that
connect each LAN to the outside world. The IPSec networking device will typically
encrypt and compress all traffic going into the WAN, and decrypt and decompress traffic
coming from the WAN; these operations are transparent to workstations and servers on
the LAN. Secure transmission is also possible with individual users who dial into the
WAN. Such user workstations must implement the IPSec protocols to provide security.

Benefits of IPSec
The benefits of IPSec are listed below:
• IPSec in a firewall/router provides strong security to all traffic crossing the perimeter

• IPSec in a firewall is resistant to bypass

• IPSec is below transport layer(TCP,UDP), hence transparent to applications

• IPSec can be transparent to end users

• IPSec can provide security for individual users if needed (useful for offsite workers and
setting up a secure virtual subnetwork for sensitive applications)

Routing Applications
IPSec also plays a vital role in the routing architecture required for internetworking. It
assures that:
• router advertisements come from authorized routers
• neighbor advertisements come from authorized routers

153
• redirect messages come from the router to which initial packet was sent
• A routing update is not forged

IP SECURITY ARCHITECTURE

To understand IP Security architecture, we examine IPSec documents first and then move
on to IPSec services and Security Associations.

IPSec Documents
The IPSec specification consists of numerous documents. The most important of these,
issued in November of 1998, are RFCs 2401, 2402, 2406, and 2408:
• RFC 2401: An overview of a security architecture
• RFC 2402: Description of a packet authentication extension to IPv4 and IPv6
• RFC 2406: Description of a packet encryption extension to IPv4 and IPv6
• RFC 2408: Specification of key management capabilities

Support for these features is mandatory for IPv6 and optional for IPv4. In both cases, the
security features are implemented as extension headers that follow the main IP header.
The extension header for authentication is known as the Authentication header; that for
encryption is known as the Encapsulating Security Payload (ESP) header. In addition to
these four RFCs, a number of additional drafts have been published by the IP Security
Protocol Working Group set up by the IETF. The documents are divided into seven
groups, as depicted in following figure:

154
• Architecture: Covers the general concepts, security requirements, definitions, and
mechanisms defining IPSec technology
• Encapsulating Security Payload (ESP): Covers the packet format and general issues
related to the use of the ESP for packet encryption and, optionally, authentication.
• Authentication Header (AH): Covers the packet format and general issues related to
the use of AH for packet authentication.

• Encryption Algorithm: A set of documents that describe how various encryption

algorithms are used for ESP.
• Authentication Algorithm: A set of documents that describe how various
authentication algorithms are used for AH and for the authentication option of ESP.
• Key Management: Documents that describe key management schemes.
• Domain of Interpretation (DOI): Contains values needed for the other documents to
relate to each other. These include identifiers for approved encryption and authentication
algorithms, as well as operational parameters such as key lifetime.

IPSec Services
IPSec architecture makes use of two major protocols (i.e., Authentication Header and ESP
protocols) for providing security at IP level. This facilitates the system to beforehand
choose an algorithm to be implemented, security protocols needed and any cryptographic
keys required to provide requested services. The IPSec services are as follows:
Connectionless Integrity:- Data integrity service is provided by IPSec via AH which
prevents the data from being altered during transmission.
Data Origin Authentication:- This IPSec service prevents the occurrence of replay
attacks, address spoofing etc., which can be fatal
Access Control:- The cryptographic keys are distributed and the traffic flow is
controlled in both AH and ESP protocols, which is done to accomplish access control over
the data transmission.
Confidentiality:- Confidentiality on the data packet is obtained by using an
encryption technique in which all the data packets are transformed into ciphertext
packets which are unreadable and difficult to understand.

155
 Limited Traffic Flow Confidentiality:- This facility or service provided by IPSec
ensures that the confidentiality is maintained on the number of packets transferred or
received. This can be done using padding in ESP.
Replay packets Rejection:- The duplicate or replay packets are identified and
discarded using the sequence number field in both AH and ESP.

SECURITY ASSOCIATIONS
Since IPSEC is designed to be able to use various security protocols, it uses Security
Associations (SA) to specify the protocols to be used. SA is a database record which
specifies security parameters controlling security operations. They are referenced by the
sending host and established by the receiving host. An index parameter called the
Security Parameters Index (SPI) is used. SAs are in one direction only and a second SA
must be established for the transmission to be bi-directional. A security association is
uniquely identified by three parameters:
• Security Parameters Index (SPI): A bit string assigned to this SA and having local
significance only. The SPI is carried in AH and ESP headers to enable the receiving system
to select the SA under which a received packet will be processed.
• IP Destination Address: Currently, only unicast addresses are allowed; this is the
address of the destination endpoint of the SA, which may be an end user system or a
network system such as a firewall or router.
• Security Protocol Identifier: This indicates whether the association is an AH or ESP
security association.
SA Parameters
In each IPSec implementation, there is a nominal Security Association Database that
defines the parameters associated with each SA. A security association is normally
defined by the following parameters:
156
• Sequence Number Counter: A 32-bit value used to generate the Sequence Number
field in AH or ESP headers
• Sequence Counter Overflow: A flag indicating whether overflow of the Sequence
Number Counter should generate an auditable event and prevent further transmission of
packets on this SA (required for all implementations).
• Anti-Replay Window: Used to determine whether an inbound AH or ESP packet is a
replay
• AH Information: Authentication algorithm, keys, key lifetimes, and related parameters
being used with AH (required for AH implementations).
• ESP Information: Encryption and authentication algorithm, keys, initialization values,
key lifetimes, and related parameters being used with ESP (required for ESP
implementations).
• Lifetime of This Security Association: A time interval or byte count after which an SA
must be replaced with a new SA (and new SPI) or terminated, plus an indication of which
of these actions should occur (required for all implementations).
• IPSec Protocol Mode: Tunnel, transport, or wildcard (required for all
implementations). These modes are discussed later in this section.
• Path MTU: Any observed path maximum transmission unit (maximum size of a packet
that can be transmitted without fragmentation) and aging variables (required for all
implementations).
Transport and Tunnel Modes
Both AH and ESP support two modes of use: transport and tunnel mode.

Transport Mode SA Tunnel Mode SA

AH Authenticates IP payload Authenticates entire inner
and selected portions of IP IP packet plus selected
header and IPv6 extension portions of outer IP header
headers
ESP Encrypts IP payload and Encrypts inner IP packet
any IPv6 extesion header
ESP with authentication Encrypts IP payload and Encrypts inner IP packet.
any IPv6 extesion header. Authenticates inner IP
Authenticates IP payload packet
but no IP header

IP sec can be used (both AH packets and ESP packets) in two modes

157
• Transport mode: the IP sec header is inserted just after the IP header –this contains
the security information, such as SA identifier, encryption, authentication
Typically used in end-to-end communication
IP header not protected
• Tunnel mode: the entire IP packet, header and all, is encapsulated in the body of a new
IP packet with a completely new IP header
Typically used in firewall-to-firewall communication
Provides protection for the whole IP packet
No routers along the way will be able (and will not need) to check the content of the
packets

AUTHENTICATION HEADER
The Authentication Header provides support for data integrity and authentication of IP
packets. The data integrity feature ensures that undetected modification to a packet's
content in transit is not possible. The authentication feature enables an end system or
network device to authenticate the user or application and filter traffic accordingly; it also
prevents the address spoofing attacks observed in today's Internet. The AH also guards
against the replay attack. Authentication is based on the use of a message authentication
code (MAC), hence the two parties must share a secret key. The Authentication Header
consists of the following fields:

158
 IPSec Authentication Header
• Next Header (8 bits): Identifies the type of header immediately following this header.
• Payload Length (8 bits): Length of Authentication Header in 32-bit words, minus 2.
For example, the default length of the authentication data field is 96 bits, or three 32-bit
words. With a three-word fixed header, there are a total of six words in the header, and
the Payload Length field has a value of 4.
• Reserved (16 bits): For future use.
• Security Parameters Index (32 bits): Identifies a security association.
• Sequence Number (32 bits): A monotonically increasing counter value, discussed
later.
• Authentication Data (variable): A variable-length field (must be an integral number
of 32-bit words) that contains the Integrity Check Value (ICV), or MAC, for this packet.

Anti-Replay Service
Anti-replay service is designed to overcome the problems faced due to replay attacks in
which an intruder intervenes the packet being transferred, make one or more duplicate
copies of that authenticated packet and then sends the packets to the desired destination,
thereby causing inconvenient processing at the destination node. The Sequence Number
field is designed to thwart such attacks.

When a new SA is established, the sender initializes a sequence number counter to 0. Each
time that a packet is sent on this SA, the sender increments the counter and places the
value in the Sequence Number field. Thus, the first value to be used is 1. This value goes
on increasing with respect to the number of packets being transmitted. The sequence
number field in each packet represents the value of this counter. The maximum value of
the sequence number field can go up to 232-1. If the limit of 232-1 is reached, the sender
should terminate this SA and negotiate a new SA with a new key.

159
The IPSec authentication document dictates that the receiver should implement a
window of size W, with a default of W = 64. The right edge of the window represents the
highest sequence number, N, so far received for a valid packet. For any packet with a
sequence number in the range from N-W+1 to N that has been correctly received (i.e.,
properly authenticated), the corresponding slot in the window is marked as shown.
Inbound processing proceeds as follows when a packet is received:

Antireplay Mechanism

1. If the received packet falls within the window and is new, the MAC is checked. If the
packet is authenticated, the corresponding slot in the window is marked.
2. If the received packet is to the right of the window and is new, the MAC is checked. If
the packet is authenticated, the window is advanced so that this sequence number is the
right edge of the window, and the corresponding slot in the window is marked.
3. If the received packet is to the left of the window, or if authentication fails, the packet
is discarded; this is an auditable event.

Integrity Check Value

ICV is the value present in the authenticated data field of ESP/AH, which is used to
determine any undesired modifications made to the data during its transit. ICV can also
be referred as MAC or part of MAC algorithm. MD5 hash code and SHA-1 hash code are
implemented along with HMAC algorithms i.e.,
• HMAC-MD5-96
• HMAC-SHA-1-96
160
In both cases, the full HMAC value is calculated but then truncated by using the first 96
bits, which is the default length for the Authentication Data field. The MAC is calculated
over
• IP header fields that either do not change in transit (immutable) or that are predictable
in value upon arrival at the endpoint for the AH SA. Fields that may change in transit and
whose value on arrival is unpredictable are set to zero for purposes of calculation at both
source and destination.
• The AH header other than the Authentication Data field. The Authentication Data field
is set to zero for purposes of calculation at both source and destination.
• The entire upper-level protocol data, which is assumed to be immutable in transit (e.g.,
a TCP segment or an inner IP packet in tunnel mode).

Transport and Tunnel Modes

The following figure shows typical IPv4 and IPv6 packets. In this case, the IP payload is a
TCP segment; it could also be a data unit for any other protocol that uses IP, such as UDP
or ICMP.

For transport mode AH using IPv4, the AH is inserted after the original IP header and
before the IP payload (e.g., a TCP segment) shown below. Authentication covers the entire
packet, excluding mutable fields in the IPv4 header that are set to zero for MAC
calculation. In the context of IPv6, AH is viewed as an end-to-end payload; that is, it is not
examined or processed by intermediate routers. Therefore, the AH appears after the IPv6
base header and the hop-by-hop, routing, and fragment extension headers. The
destination options extension header could appear before or after the AH header,
depending on the semantics desired. Again, authentication covers the entire packet,
excluding mutable fields that are set to zero for MAC calculation.

161
For tunnel mode AH, the entire original IP packet is authenticated, and the AH is inserted
between the original IP header and a new outer IP header. The inner IP header carries
the ultimate source and destination addresses, while an outer IP header may contain
different IP addresses (e.g., addresses of firewalls or other security gateways). With
tunnel mode, the entire inner IP packet, including the entire inner IP header is protected
by AH. The outer IP header (and in the case of IPv6, the outer IP extension headers) is
protected except for mutable and unpredictable fields.

ENCAPSULATING SECURITY PAYLOAD

The Encapsulating Security Payload provides confidentiality services, including

confidentiality of message contents and limited traffic flow confidentiality. As an optional
feature, ESP can also provide an authentication service.
ESP Format
The following figure shows the format of an ESP packet. It contains the following fields:

162
 Security Parameters Index (32 bits): Identifies a security association.
• Sequence Number (32 bits): A monotonically increasing counter value; this provides
an anti-replay function, as discussed for AH.
• Payload Data (variable): This is a transport-level segment (transport mode) or IP
packet (tunnel mode) that is protected by encryption.
• Padding (0-255 bytes): This field is used to make the length of the plaintext to be a
multiple of some desired number of bytes. It is also added to provide confidentiality.
• Pad Length (8 bits): Indicates the number of pad bytes immediately preceding this
field.
• Next Header (8 bits): Identifies the type of data contained in the payload data field by
identifying the first header in that payload (for example, an extension header in IPv6, or
an upper-layer protocol such as TCP).
• Authentication Data (variable): A variable-length field (must be an integral number
of 32-bit words) that contains the Integrity Check Value computed over the ESP packet
minus the Authentication Data field.
Adding encryption makes ESP a bit more complicated because the encapsulation
surrounds the payload rather than precedes it as with AH: ESP includes header and trailer

163
Transport Mode ESP

Tunnel Mode ESP

Basic Combinations of Security Associations

The IPSec Architecture document lists four examples of combinations of SAs that must be
supported by compliant IPSec hosts (e.g., workstation, server) or security gateways (e.g.
firewall, router).
case:-1

All security is provided between end systems that implement IPSec. For any two end
systems to communicate via an SA, they must share the appropriate secret keys. Among
the possible combinations:
a) AH in transport mode
b) ESP in transport mode
164
c) ESP followed by AH in transport mode (an ESP SA inside an AH SA)
d) Any one of a, b, or c inside an AH or ESP in tunnel mode
Case:-2

Security is provided only between gateways (routers, firewalls, etc.) and no hosts
implement IPSec. This case illustrates simple virtual private network support. The
security architecture document specifies that only a single tunnel SA is needed for this
case. The tunnel could support AH, ESP, or ESP with the authentication option. Nested
tunnels are not required because the IPSec services apply to the entire inner packet.
Case-3:-

The third combination is similar to the second, but in addition provides security even to
nodes. This combination makes use of two tunnels first for gateway to gateway and
second for node to node. Either authentication or the encryption or both can be provided
by using gateway to gateway tunnel. An additional IPSec service is provided to the
individual nodes by using node to node tunnel.
Case:-4

165
This combination is suitable for serving remote users i.e., the end user sitting anywhere
in the world can use the internet to access the organizational workstations via the
firewall. This combination states that only one tunnel is needed for communication
between a remote user and an organizational firewall.

KEY MANAGEMENT
The key management portion of IPSec involves the determination and distribution of
secret keys. The IPSec Architecture document mandates support for two types of key
management:
• Manual: A system administrator manually configures each system with its own keys
and with the keys of other communicating systems. This is practical for small, relatively
static environments.
• Automated: An automated system enables the on-demand creation of keys for SAs and
facilitates the use of keys in a large distributed system with an evolving configuration.

The default automated key management protocol for IPSec is referred to as

ISAKMP/Oakley and consists of the following elements:
• Oakley Key Determination Protocol: Oakley is a key exchange protocol based on the
Diffie-Hellman algorithm but providing added security. Oakley is generic in that it does
not dictate specific formats.
• Internet Security Association and Key Management Protocol (ISAKMP): ISAKMP
provides a framework for Internet key management and provides the specific protocol
support, including formats, for negotiation of security attributes.
166
Oakley Key Determination Protocol
Oakley is a refinement of the Diffie-Hellman key exchange algorithm. The Diffie-Hellman
algorithm has two attractive features:
• Secret keys are created only when needed. There is no need to store secret keys for a
long period of time, exposing them to increased vulnerability.
• The exchange requires no pre-existing infrastructure other than an agreement on the
global parameters.

However, Diffie-Hellman has got some weaknesses:

• No identity information about the parties is provided.
• It is possible for a man-in-the-middle attack
• It is computationally intensive. As a result, it is vulnerable to a clogging attack, in which
an opponent requests a high number of keys.

Oakley is designed to retain the advantages of Diffie-Hellman while countering its

weaknesses.
Features of Oakley
The Oakley algorithm is characterized by five important features:
1. It employs a mechanism known as cookies to thwart clogging attacks.
2. It enables the two parties to negotiate a group; this, in essence, specifies the global
parameters of the Diffie-Hellman key exchange.
3. It uses nonces to ensure against replay attacks.
4. It enables the exchange of Diffie-Hellman public key values.
5. It authenticates the Diffie-Hellman exchange to thwart man-in-the-middle attacks.
In clogging attacks, an opponent forges the source address of a legitimate user and sends
a public Diffie-Hellman key to the victim. The victim then performs a modular
exponentiation to compute the secret key. Repeated messages of this type can clog the
victim's system with useless work. The cookie exchange requires that each side send a
pseudorandom number, the cookie, in the initial message, which the other side
acknowledges. This acknowledgment must be repeated in the first message of the Diffie-
Hellman key exchange. The recommended method for creating the cookie is to perform a

167
fast hash (e.g., MD5) over the IP Source and Destination addresses, the UDP Source and
Destination ports, and a locally generated secret value. Oakley supports the use of
different groups for the Diffie-Hellman key exchange. Each group includes the definition
of the two global parameters and the identity of the algorithm. Oakley employs nonces
to ensure against replay attacks. Each nonce is a locally generated pseudorandom
number. Nonces appear in responses and are encrypted during certain portions of the
exchange to secure their use. Three different authentication methods can be used with
Oakley are digital signatures, public-key encryption and Symmetric-key encryption.
Aggressive Oakley Key Exchange
Aggressive key exchange is a technique used for exchanging the message keys and is so
called because only three messages are allowed to be exchanged at any time.

Example of Aggressive Oakley Key Exchange

In the first step, the initiator (I) transmits a cookie, the group to be used, and I's public
Diffie-Hellman key for this exchange. I also indicates the offered public-key encryption,
hash, and authentication algorithms to be used in this exchange. Also included in this
message are the identifiers of I and the responder (R) and I's nonce for this exchange.
Finally, I appends a signature using I's private key that signs the two identifiers, the
nonce, the group, the Diffie-Hellman public key, and the offered algorithms. When R
receives the message, R verifies the signature using I's public signing key. R acknowledges
the message by echoing back I's cookie, identifier, and nonce, as well as the group. R also
includes in the message a cookie, R's Diffie-Hellman public key, the selected algorithms
(which must be among the offered algorithms), R's identifier, and R's nonce for this
exchange. Finally, R appends a signature using R's private key that signs the two
168
identifiers, the two nonces, the group, the two Diffie-Hellman public keys, and the
selected algorithms.

When I receives the second message, I verifies the signature using R's public key. The
nonce values in the message assure that this is not a replay of an old message. To complete
the exchange, I must send a message back to R to verify that I has received R's public key.

ISAKMP
ISAKMP defines procedures and packet formats to establish, negotiate, modify, and delete
security associations. As part of SA establishment, ISAKMP defines payloads for
exchanging key generation and authentication data.
ISAKMP Header Format

An ISAKMP message consists of an ISAKMP header followed by one or more payloads and
must follow UDP transport layer protocol for its implementation. The header format of
an ISAKMP header is shown below:
• Initiator Cookie (64 bits): Cookie of entity that initiated SA establishment, SA
notification, or SA deletion.
• Responder Cookie (64 bits): Cookie of responding entity; null in first message from
initiator.
• Next Payload (8 bits): Indicates the type of the first payload in the message
• Major Version (4 bits): Indicates major version of ISAKMP in use.
• Minor Version (4 bits): Indicates minor version in use.

169
• Exchange Type (8 bits): Indicates the type of exchange. Can be informational,
aggressive, authentication only, identity protection or base exchange (S).
• Flags (8 bits): Indicates specific options set for this ISAKMP exchange. Two bits so far
defined: The Encryption bit is set if all payloads following the header are encrypted using
the encryption algorithm for this SA. The Commit bit is used to ensure that encrypted
material is not received prior to completion of SA establishment.
• Message ID (32 bits): Unique ID for this message.
• Length (32 bits): Length of total message (header plus all payloads) in octets.

ISAKMP Payload Types

All ISAKMP payloads begin with the same generic payload header shown below.

The Next Payload field has a value of 0 if this is the last payload in the message; otherwise
its value is the type of the next payload. The Payload Length field indicates the length in
octets of this payload, including the generic payload header. There are many different
ISAKMP payload types. They are:
a. The SA payload is used to begin the establishment of an SA. The Domain of
Interpretation parameter identifies the DOI under which negotiation is taking place. The
Situation parameter defines the security policy for this negotiation; in essence, the levels
of security required for encryption and confidentiality are specified (e.g., sensitivity level,
security compartment).
b. The Proposal payload contains information used during SA negotiation. The payload
indicates the protocol for this SA (ESP or AH) for which services and mechanisms are
being negotiated. The payload also includes the sending entity's SPI and the number of
transforms. Each transform is contained in a transform payload.
c. The Transform payload defines a security transform to be used to secure the
communications channel for the designated protocol. The Transform # parameter serves
to identify this particular payload so that the responder may use it to indicate acceptance
170
of this transform. The Transform-ID and Attributes fields identify a specific transform
(e.g., 3DES for ESP, HMAC-SHA-1-96 for AH) with its associated attributes (e.g., hash
length).
d. The Key Exchange payload can be used for a variety of key exchange techniques,
including Oakley, Diffie-Hellman, and the RSA-based key exchange used by PGP. The Key
Exchange data field contains the data required to generate a session key and is dependent
on the key exchange algorithm used.
e. The Identification payload is used to determine the identity of communicating peers
and may be used for determining authenticity of information. Typically the ID Data field
will contain an IPv4 or IPv6 address.
f. The Certificate payload transfers a public-key certificate. The Certificate Encoding field
indicates the type of certificate or certificate-related information, which may include
SPKI, ARL, CRL, PGP info etc. At any point in an ISAKMP exchange, the sender may include
a Certificate Request payload to request the certificate of the other communicating entity.
g. The Hash payload contains data generated by a hash function over some part of the
message and/or ISAKMP state. This payload may be used to verify the integrity of the
data in a message or to authenticate negotiating entities.
h. The Signature payload contains data generated by a digital signature function over
some part of the message and/or ISAKMP state. This payload is used to verify the integrity
of the data in a message and may be used for nonrepudiation services.
i. The Nonce payload contains random data used to guarantee liveness during an
exchange and protect against replay attacks.
j. The Notification payload contains either error or status information associated with
this SA or this SA negotiation. Some of the ISAKMP error messages that have been defined
are Invalid Flags, Invalid Cookie, Payload Malformed etc
k. The Delete payload indicates one or more SAs that the sender has deleted from its
database and that therefore are no longer valid.
ISAKMP Exchanges
ISAKMP provides a framework for message exchange, with the payload types serving as
the building blocks. The specification identifies five default exchange types that should
be supported.

171
1. Base Exchange: allows key exchange and authentication material to be transmitted
together. This minimizes the number of exchanges at the expense of not providing
identity protection.

The first two messages provide cookies and establish an SA with agreed protocol and
transforms; both sides use a nonce to ensure against replay attacks. The last two
messages exchange the key material and user IDs, with an authentication mechanism
used to authenticate keys, identities, and the nonces from the first two messages.
2. Identity Protection Exchange: expands the Base Exchange to protect the users'
identities.

The first two messages establish the SA. The next two messages perform key exchange,
with nonces for replay protection. Once the session key has been computed, the two
parties

exchange encrypted messages that contain authentication information, such as digital

signatures and optionally certificates validating the public keys.
3. Authentication Only Exchange: used to perform mutual authentication, without a key
exchange

172
The first two messages establish the SA. In addition, the responder uses the second
message to convey its ID and uses authentication to protect the message. The initiator
sends the third message to transmit its authenticated ID.
4. Aggressive Exchange: minimizes the number of exchanges at the expense of not
providing identity protection.

In the first message, the initiator proposes an SA with associated offered protocol and
transform options. The initiator also begins the key exchange and provides its ID. In the
second message, the responder indicates its acceptance of the SA with a particular
protocol and transform, completes the key exchange, and authenticates the transmitted
information. In the third message, the initiator transmits an authentication result that
covers the previous information, encrypted using the shared secret session key.
5. Informational Exchange: used for one-way transmittal of information for SA
management.

173
 UNIT-5
Web Security: Web Security Considerations, Secure Socket Layer (SSL) and Transport
Layer Security (TLS), Secure Electronic Transaction (SET). Intruders, Viruses and
Firewalls: Intruders, Intrusion Detection, Password Management, Virus and related
threats, Countermeasures, Firewall Design Principles, Types of Firewalls.
Case Studies on Cryptography and Security: Secure Inter Branch Transactions, Cross Site
Vulnerability, Virtual Elections.

Usage of internet for transferring or retrieving the data has got many benefits like
speed, reliability, security etc. Much of the Internet's success and popularity lies in the
fact that it is an open global network. At the same time, the fact that it is open and global
makes it not very secure. The unique nature of the Internet makes exchanging
information and transacting business over it inherently dangerous. The faceless,
voiceless, unknown entities and individuals that share the Internet may or may not be
who or what they profess to be. In addition, because the Internet is a global network, it
does not recognize national borders and legal jurisdictions. As a result, the transacting
parties may not be where they say they are and may not be subject to the same laws or
regulations.
For the exchange of information and for commerce to be secure on any network,
especially the Internet, a system or process must be put in place that satisfies
requirements for confidentiality, access control, authentication, integrity, and
nonrepudiation. These requirements are achieved on the Web through the use of
encryption and by employing digital signature technology. There are many examples on
the Web of the practical application of encryption. One of the most important is the SSL
protocol.
A summary of types of security threats faced in using the Web is given below:

174
One way of grouping the security threats is in terms of passive and active attacks. Passive
attacks include eavesdropping on network traffic between browser and server and
gaining access to information on a website that is supposed to be restricted. Active attacks
include impersonating another user, altering messages in transit between client and
server and altering information on a website. Another way of classifying these security
threats is in terms of location of the threat: Web server, Web browser and network traffic
between browser and server.
Web Traffic Security Approaches
Various approaches for providing Web Security are available, where they are similar in
the services they provide and also similar to some extent in the mechanisms they use.
They differ with respect to their scope of applicability and their relative location within
the TCP/IP protocol stack. The main approaches are IPSec, SSL or TLS and SET.

Relative location of Security Faculties in the TCP/IP Protocol Stack

IPSec provides security at the network level and the main advantage is that it is
transparent to end users and applications. In addition, IPSec includes a filtering capability
so that only selected traffic can be processed. Secure Socket Layer or Transport Layer
Security (SSL/TLS) provides security just above the TCP at transport layer. Two
implementation choices are present here. Firstly, the SSL/TLS can be implemented as a

175
part of TCP/IP protocol suite, thereby being transparent to applications. Alternatively,
SSL can be embedded in specific packages like SSL being implemented by Netscape and
Microsoft Explorer browsers. Secure Electronic Transaction (SET) approach provides
application-specific services i.e., according to the security requirements of a particular
application. The main advantage of this approach is that service can be tailored to the
specific needs of a given application.

SECURE SOCKET LAYER/TRANSPORT LAYER SECURITY

SSL was developed by Netscape to provide security when transmitting information on

the Internet. The Secure Sockets Layer protocol is a protocol layer which may be placed
between a reliable connection-oriented network layer protocol (e.g. TCP/IP) and the
application protocol layer (e.g. HTTP).

SSL provides for secure communication between client and server by allowing mutual
authentication, the use of digital signatures for integrity and encryption for privacy. SSL
protocol has different versions such as SSLv2.0, SSLv3.0, where SSLv3.0 has an advantage
with the addition of support for certificate chain loading. SSL 3.0 is the basis for the
Transport Layer Security [TLS] protocol standard. SSL is designed to make use of TCP to
provide a reliable end-to-end secure service. SSL is not a single protocol, but rather two
layers of protocols as shown below:

176
The SSL Record Protocol provides basic security services to various higher-layer
protocols. In particular, the Hypertext Transfer Protocol (HTTP), which provides the
transfer service for Web client/server interaction, can operate on top of SSL. Three
higher-layer protocols are defined as part of SSL: the Handshake Protocol, The Change
Cipher Spec Protocol, and the Alert Protocol. Two important SSL concepts are the SSL
session and the SSL connection, which are defined in the specification as follows:

• Connection: A connection is a transport (in the OSI layering model definition) that
provides a suitable type of service. For SSL, such connections are peer-to-peer
relationships. The connections are transient. Every connection is associated with one
session.
• Session: An SSL session is an association between a client and a server. Sessions are
created by the Handshake Protocol. Sessions define a set of cryptographic security
parameters, which can be shared among multiple connections. Sessions are used to avoid
the expensive negotiation of new security parameters for each connection.

An SSL session is stateful. Once a session is established, there is a current operating state
for both read and write (i.e., receive and send). In addition, during the Handshake
Protocol, pending read and write states are created. Upon successful conclusion of the
Handshake Protocol, the pending states become the current states. An SSL session may
include multiple secure connections; in addition, parties may have multiple simultaneous
sessions.
A session state is defined by the following parameters:

177
 Session identifier: An arbitrary byte sequence chosen by the server to identify an
active or resumable session state.
Peer certificate:An X509.v3 certificate of the peer. This element of the state may be
null.
Compression method: The algorithm used to compress data prior to encryption.
Cipher spec:Specifies the bulk data encryption algorithm (such as null, AES, etc.) and
a hash algorithm (such as MD5 or SHA-1) used for MAC calculation. It also defines
cryptographic attributes such as the hash_size.
Master secret:48-byte secret shared between the client and server.
Is resumable:A flag indicating whether the session can be used to initiate new
connections.

A connection state is defined by the following parameters:

Server and client random: Byte sequences that are chosen by the server and client
for each connection.
Server write MAC secret: The secret key used in MAC operations on data sent by the
server.
Client write MAC secret: The secret key used in MAC operations on data sent by the
client.
Server write key:The conventional encryption key for data encrypted by the server
and decrypted by the client.
Client write key: The conventional encryption key for data encrypted by the client and
decrypted by the server.
Initialization vectors: When a block cipher in CBC mode is used, an initialization
vector (IV) is maintained for each key. This field is first initialized by the SSL Handshake
Protocol. Thereafter the final ciphertext block from each record is preserved for use as
the IV with the following record.
Sequence numbers: Each party maintains separate sequence numbers for
transmitted and received messages for each connection. When a party sends or receives
a change cipher spec message, the appropriate sequence number is set to zero. Sequence
numbers may not exceed 264-1.
SSL Record Protocol
The SSL Record Protocol provides two services for SSL connections:
178
• Confidentiality: The Handshake Protocol defines a shared secret key that is used for
conventional encryption of SSL payloads.
• Message Integrity: The Handshake Protocol also defines a shared secret key that is used
to form a message authentication code (MAC).
The Record Protocol takes an application message to be transmitted, fragments the data
into manageable blocks, optionally compresses the data, applies a MAC, encrypts, adds a
header, and transmits the resulting unit in a TCP segment. Received data are decrypted,
verified, decompressed, and reassembled and then delivered to higher-level users. The
overall operation of the SSL Record Protocol is shown below:

The first step is fragmentation. Each upper-layer message is fragmented into blocks of
214 bytes (16384 bytes) or less. Next, compression is optionally applied. Compression
must be lossless and may not increase the content length by more than 1024 bytes. The
next step in processing is to compute a message authentication code over the
compressed data. For this purpose, a shared secret key is used. The calculation is
defined as:
hash(MAC_write_secret || pad_2 ||
hash(MAC_write_secret || pad_1 || seq_num ||
SSLCompressed.type ||
SSLCompressed.length || SSLCompressed.fragment)) Where,

179
 MAC_write_secret = = the byte 0x36 (0011
Secret shared key pad_1 0110) repeated 48 times
(384 bits) for MD5 and 40
times for
pad_2 = the byte 0x5C (0101
1100) repeated 48 times
for MD5 and 40 times for
SHA-1

The main difference between HMAC and above calculation is that the two pads are
concatenated in SSLv3 and are XORed in HMAC. Next, the compressed message plus the
MAC are encrypted using symmetric encryption. Encryption may not increase the content
length by more than 1024 bytes, so that the total length may not exceed 214 + 2048. The
encryption algorithms allowed are AES-128/256, IDEA-128, DES-40, 3DES-168, RC2-40,
Fortezza, RC4-40 and RC4-128. For stream encryption, the compressed message plus the
MAC are encrypted whereas, for block encryption, padding may be added after the MAC
prior to encryption.

The final step of SSL Record Protocol processing is to prepend a header, consisting of the
following fields:
180
• Content Type (8 bits): The higher layer protocol used to process the enclosed fragment.
• Major Version (8 bits): Indicates major version of SSL in use. For SSLv3, the value is 3.
• Minor Version (8 bits): Indicates minor version in use. For SSLv3, the value is 0.
• Compressed Length (16 bits): The length in bytes of the plaintext fragment (or
compressed fragment if compression is used). The maximum value is 214 + 2048.

The content types that have been defined are change_cipher_spec, alert, handshake, and
application_data.

SSL Change Cipher Spec Protocol

The Change Cipher Spec Protocol is one of the three SSL-specific protocols that use the
SSL Record Protocol, and it is the simplest. This protocol consists of a single message,
which consists of a single byte with the value 1.
The sole purpose of this message is to cause the pending state to be copied into the
current state, which updates the cipher suite to be used on this connection.
SSL Alert Protocol
The Alert Protocol is used to convey SSL-related alerts to the peer entity. As with
other applications that use SSL, alert messages are compressed and encrypted, as
specified by the current state. Each message in this protocol consists of two bytes.
The first byte takes the value warning(1) or fatal(2) to convey the severity of the message.
If the level is fatal, SSL immediately terminates the connection. Other connections on the
same session may continue, but no new connections on this session may be established.
The second byte contains a code that indicates the specific alert. The fatal alerts are listed
below
• unexpected_message: An inappropriate message was received.
• bad_record_mac: An incorrect MAC was received.
• decompression_failure: The decompression function received improper input (e.g.,
unable to decompress or decompress to greater than maximum allowable length).
• handshake_failure: Sender was unable to negotiate an acceptable set of security
parameters given the options available.
• illegal_parameter: A field in a handshake message was out of range or inconsistent with
other fields.
The remainder of the alerts are given below:
181
• close_notify: Notifies the recipient that the sender will not send any more messages on
this connection. Each party is required to send a close_notify alert before closing the write
side of a connection.
• no_certificate: May be sent in response to a certificate request if no appropriate
certificate is available.
• bad_certificate: A received certificate was corrupt (e.g., contained a signature that did
not verify).
• unsupported_certificate: The type of the received certificate is not supported.
• certificate_revoked: A certificate has been revoked by its signer.
• certificate_expired: A certificate has expired.
• certificate_unknown: Some other unspecified issue arose in processing the certificate,
rendering it unacceptable.
SSL Handshake Protocol
SSL Handshake protocol ensures establishment of reliable and secure session between
client and server and also allows server & client to:
• authenticate each other
• to negotiate encryption & MAC algorithms
• to negotiate cryptographic keys to be used

The Handshake Protocol consists of a series of messages exchanged by client and server.
All of these have the format shown below and each message has three fields:

• Type (1 byte): Indicates one of 10 messages.

• Length (3 bytes): The length of the message in bytes.
• Content (>=0 bytes): The parameters associated with this message

The following figure shows the initial exchange needed to establish a logical connection
between client and server. The exchange can be viewed as having four phases.in phases
o Establish Security Capabilities
o Server Authentication and Key Exchange
182
o Client Authentication and Key Exchange
o Finish

Phase 1. Establish Security Capabilities

This phase is used to initiate a logical connection and to establish the security capabilities
that will be associated with it. The exchange is initiated by the client, which sends a
client_hello message with the following parameters:
• Version: The highest SSL version understood by the client.
• Random: A client-generated random structure, consisting of a 32-bit timestamp and 28
bytes generated by a secure random number generator. These values serve as nonces and
are used during key exchange to prevent replay attacks.

Session ID: A variable-length session identifier. A nonzero value indicates that the
client wishes to update the parameters of an existing connection or create a new
connection on this session. A zero value indicates that the client wishes to establish a new
connection on a new session.
• CipherSuite: This is a list that contains the combinations of cryptographic algorithms
supported by the client, in decreasing order of preference. Each element of the list (each
cipher suite) defines both a key exchange algorithm and a CipherSpec.
• Compression Method: This is a list of the compression methods the client supports.

183
Phase 2. Server Authentication and Key Exchange
The server begins this phase by sending its certificate via a certificate message, which
contains one or a chain of X.509 certificates. The certificate message is required for any
agreed-on key exchange method except anonymous Diffie-Hellman. Next, a
server_key_exchange message may be sent if it is required. It is not required in two
instances: (1) The server has sent a certificate with fixed Diffie-Hellman parameters, or
(2) RSA key exchange is to be used.

Phase 3. Client Authentication and Key Exchange

184
Once the server_done message is received by client, it should verify whether a valid
certificate is provided and check that the server_hello parameters are acceptable. If all is
satisfactory, the client sends one or more messages back to the server. If the server has
requested a certificate, the client begins this phase by sending a certificate message. If
no suitable certificate is available, the client sends a no_certificate alert instead. Next is
the client_key_exchange message, for which the content of the message depends on the
type of key exchange.

Phase 4. Finish
This phase completes the setting up of a secure connection. The client sends a
change_cipher_spec message and copies the pending CipherSpec into the current
CipherSpec. The client then immediately sends the finished message under the new
algorithms, keys, and secrets. The finished message verifies that the key exchange and
authentication processes were successful.

TRANSPORT LAYER SECURITY

TLS was released in response to the Internet community’s demands for a

standardized protocol. TLS (Transport Layer Security), defined in RFC 2246, is a protocol
for establishing a secure connection between a client and a server. TLS (Transport Layer
Security) is capable of authenticating both the client and the server and creating a
encrypted connection between the two. Many protocols use TLS (Transport Layer
Security) to establish secure connections, including HTTP, IMAP, POP3, and SMTP. The
TLS Handshake Protocol first negotiates key exchange using an asymmetric algorithm
such as RSA or Diffie-Hellman. The TLS Record Protocol then begins opens an encrypted
channel using a symmetric algorithm such as RC4, IDEA, DES, or 3DES. The TLS Record
Protocol is also responsible for ensuring that the communications are not altered in
transit. Hashing algorithms such as MD5 and SHA are used for this purpose. RFC 2246 is
very similar to SSLv3. There are some minor differences ranging from protocol version
numbers to generation of key material.
Version Number: The TLS Record Format is the same as that of the SSL Record Format and
the fields in the header have the same meanings. The one difference is in version values.
For the current version of TLS, the Major Version is 3 and the Minor Version is 1.
185
Message Authentication Code: Two differences arise one being the actual algorithm and the
other being scope of MAC calculation. TLS makes use of the HMAC algorithm defined in
RFC 2104. SSLv3 uses the same algorithm, except that the padding bytes are concatenated
with the secret key rather than being XORed with the secret key padded to the block
length. For TLS, the MAC calculation encompasses the fields indicated in the following
expression:
HMAC_hash(MAC_write_secret, seq_num || TLSCompressed.type ||
TLSCompressed.version || TLSCompressed.length ||
TLSCompressed.fragment)
The MAC calculation covers all of the fields covered by the SSLv3 calculation, plus the
field TLSCompressed.version, which is the version of the protocol being employed.
Pseudorandom Function: TLS makes use of a pseudorandom function referred to as PRF to
expand secrets into blocks of data for purposes of key generation or validation. The PRF
is based on the following data expansion function:
P_hash(secret, seed) = HMAC_hash(secret, A(1) || seed) ||
HMAC_hash(secret, A(2) || seed) ||
HMAC_hash(secret, A(3) || seed) || ...
where A() is defined as
A(0) = seed
A(i) = HMAC_hash (secret, A(i - 1))
The data expansion function makes use of the HMAC algorithm, with either MD5 or SHA-
1 as the underlying hash function. As can be seen, P_hash can be iterated as many times
as necessary to produce the required quantity of data. each iteration involves two
executions of HMAC, each of which in turn involves two executions of the underlying hash
algorithm.

SET (SECURE ELECTRONIC TRANSACTION)

SET is an open encryption and security specification designed to protect credit card
transactions on the Internet. SET is not itself a payment system. Rather it is a set of
security protocols and formats that enables users to employ the existing credit card
payment infrastructure on an open network, such as the Internet, in a secure fashion. In
essence, SET provides three services:
• Provides a secure communications channel among all parties involved in a transaction

186
• Provides trust by the use of X.509v3 digital certificates
• Ensures privacy because the information is only available to parties in a transaction
when and where necessary
SET Requirements
Provide confidentiality of payment and ordering information
Ensure the integrity of all transmitted data
Provide authentication that a cardholder is a legitimate user of a credit card account
Provide authentication that a merchant can accept credit card transactions through its
relationship with a financial institution
Ensure the use of the best security practices and system design techniques to protect
all legitimate parties in an electronic commerce transaction
Create a protocol that neither depends on transport security mechanisms nor
prevents their use
Facilitate and encourage interoperability among software and network providers
SET Key Features
To meet the requirements, SET incorporates the following features:
• Confidentiality of information
• Integrity of data
• Cardholder account authentication
• Merchant authentication

SET Participants
Cardholder: purchasers interact with merchants from personal computers over the
Internet
Merchant: a person or organization that has goods or services to sell to the cardholder
Issuer: a financial institution, such as a bank, that provides the cardholder with the
payment card.
Acquirer: a financial institution that establishes an account with a merchant and
processes payment card authorizations and payments
Payment gateway: a function operated by the acquirer or a designated third party that
processes merchant payment messages
Certification authority (CA): an entity that is trusted to issue X.509v3 public-key
certificates for cardholders, merchants, and payment gateways
187
Events in a transaction
1. The customer obtains a credit card account with a bank that supports electronic
payment and SET
2. The customer receives a X.509v3 digital certificate signed by the bank.
3. Merchants have their own certificates
4. The customer places an order
5. The merchant sends a copy of its certificate so that the customer can verify that it's a
valid store
6. The order and payment are sent
7. The merchant requests payment authorization
8. The merchant confirms the order
9. The merchant ships the goods or provides the service to the customer
10. The merchant requests payment

DUAL SIGNATURE
The purpose of the dual signature is to link two messages that are intended for two
different recipients. The customer wants to send the order information (OI) to the
merchant and the payment information (PI) to the bank. The merchant does not need to
188
know the customer's credit card number, and the bank does not need to know the details
of the customer's order. The customer is afforded extra protection in terms of privacy by
keeping these two items separate. The two items must be linked and the link is needed
so that the customer can prove that this payment is intended for this order and not for
some other goods or service.

The customer takes the hash (using SHA-1) of the PI and the hash of the OI. These two
hashes are then concatenated and the hash of the result is taken. Finally, the customer
encrypts the final hash with his or her private signature key, creating the dual signature.
The operation can be summarized as

where KRc is the customer's private signature key. Now suppose that the merchant is in
possession of the dual signature (DS), the OI, and the message digest for the PI (PIMD).
The merchant also has the public key of the customer, taken from the customer's
certificate. Then the merchant can compute the quantities H(PIMS||H[OI]) and D KUc(DS)
where KUc is the customer's public signature key. If these two quantities are equal, then
the merchant has verified the signature. Similarly, if the bank is in possession of DS, PI,
the message digest for OI (OIMD), and the customer's public key, then the bank can
compute H(H[OI]||OIMD) and DKUc(DS). Again, if these two quantities are equal, then the
bank has verified the signature. To summarize:
189
 The merchant has received OI and verified the signature.
The bank has received PI and verified the signature.
The customer has linked the OI and PI and can prove the linkage.

For a merchant to substitute another OI, he has to find another OI whose hash exactly
matches OIMD, which is deemed impossible. So, the OI cannot be linked with another PI.

Purchase Request

The message includes the following:

1. Purchase-related information, which will be forwarded to the payment gateway by the
merchant and consists of: PI, dual signature & OI message digest (OIMD). These are
encrypted using Ks. A digital envelope is also present which is formed by encrypting Ks
with the payment gateway's public key-exchange key.
2. Order-related information, needed by the merchant and consists of: OI, dual signature,
PI message digest (PIMD). OI is sent in the clear.
3. Cardholder certificate. This contains the cardholder’s public signature key. It is needed
by the merchant and payment gateway.

Merchant receives the Purchase Request message, the following actions are done:
190
1. verifies cardholder certificates using CA sigs
2. verifies dual signature using customer's public signature key to ensure order has not
been tampered with in transit & that it was signed using cardholder's private signature
key
3. processes order and forwards the payment information to the payment gateway for
authorization
4. sends a purchase response to cardholder

The Purchase Response message includes a response block that acknowledges the order
and references the corresponding transaction number. This block is signed by the
merchant using its private signature key. The block and its signature are sent to the
customer, along with the merchant’s signature certificate. Necessary action will be taken
by cardholder’s software upon verification of the certificates and signature.

INTRUDERS
One of the most publicized attacks to security is the intruder, generally referred to as
hacker or cracker. Three classes of intruders are as follows

191
  Masquerader – an individual who is not authorized to use the computer and who
penetrates a system’s access controls to exploit a legitimate user’s account.

 Misfeasor – a legitimate user who accesses data, programs, or resources for which
such access is not authorized, or who is authorized for such access but misuse his
or her privileges.

 Clandestine user – an individual who seizes supervisory control of the system

and uses this control to evade auditing and access controls or to suppress audit
collection.
The masquerader is likely to be an outsider; the misfeasor generally is an insider; and the
clandestine user can be either an outsider or an insider. Intruder attacks range from the
benign to the serious. At the benign end of the scale, there are many people who simply
wish to explore internets and see what is out there. At the serious end are individuals
who are attempting to read privileged data, perform unauthorized modifications to data,
or disrupt the system. Benign intruders might be tolerable, although they do consume
resources and may slow performance for legitimate users. However there is no way in
advance to know whether an intruder will be benign or malign.

Intrusion techniques The objective of the intruders is to gain access to a system or to

increase the range of privileges accessible on a system. Generally, this requires the
intruders to acquire information that should be protected. In most cases, the information
is in the form of a user password. Typically, a system must maintain a file that associates
a password with each authorized user. If such a file is stored with no protection, then it is
an easy matter to gain access to it. The password files can be protected in one of the two
ways:
 One way encryption – the system stores only an encrypted form of user’s
password. In practice, the system usually performs a one way transformation (not
reversible) in which the password is used to generate a key for the encryption
function and in which a fixed length output is produced.
 Access control – access to the password file is limited to one or a very few
accounts.

192
The following techniques are used for learning passwords.
 Try default passwords used with standard accounts that are shipped with the
system. Many administrators do not bother to change these defaults.

 Exhaustively try all short passwords.

Try words in the system’s online dictionary or a list of likely passwords.

 Collect information about users such as their full names, the name of their spouse
and children, pictures in their office and books in their office that are related to
hobbies.

 Try user’s phone number, social security numbers and room numbers.

 Try all legitimate license plate numbers.

 Use a torjan horse to bypass restriction on access.

 Tap the line between a remote user and the host system.
Two principle countermeasures:
 Detection – concerned with learning of an attack, either before or after its success.

 Prevention – challenging security goal and an uphill bottle at all times.

INTRUSION DETECTION
Inevitably, the best intrusion prevention system will fail. A system's second line of
defense is intrusion detection, and this has been the focus of much research in recent
years. This interest is motivated by a number of considerations, including the following:
1. If an intrusion is detected quickly enough, the intruder can be identified and ejected
from the system before any damage is done or any data are compromised.
2. An effective intrusion detection system can serve as a deterrent, so acting to prevent
intrusions.
3. Intrusion detection enables the collection of information about intrusion techniques
that can be used to strengthen the intrusion prevention facility.

Intrusion detection is based on the assumption that the behavior of the intruder
differs from that of a legitimate user in ways that can be quantified.

193
 Figure 18.1 suggests, in very abstract terms, the nature of the task confronting the
designer of an intrusion detection system. Although the typical behavior of an intruder
differs from the typical behavior of an authorized user, there is an overlap in these
behaviors. Thus, a loose interpretation of intruder behavior, which will catch more
intruders, will also lead to a number of "false positives," or authorized users identified as
intruders. On the other hand, an attempt to limit false positives by a tight interpretation
of intruder behavior will lead to an increase in false negatives, or intruders not identified
as intruders. Thus, there is an element of compromise and art in the practice of intrusion
detection.
VIRUSES AND RELATED THREATS
Perhaps the most sophisticated types of threats to computer systems are presented by
programs that exploit vulnerabilities in computing systems.

Name Description
Virus Attaches itself to a program and
propagates copies of itself to other
programs
Worm Program that propagates copies of itself to
other computers
Logic bomb Triggers action when condition occurs
Trojan horse Program that contains unexpected
additional functionality

194
Backdoor (trapdoor) Program modification that allows
unauthorized access to functionality
Exploits Code specific to a single vulnerability or
set of vulnerabilities
Downloaders Program that installs other items on a
machine that is under attack. Usually, a
downloader is sent in an e-mail.
Auto-rooter Malicious hacker tools used to break into
new machines remotely
Kit (virus generator) Set of tools for generating new viruses
automatically
Spammer programs Used to send large volumes of unwanted
e-mail
Flooders Used to attack networked computer
systems with a large volume of traffic to
carry out a denial of service (DoS) attack
Keyloggers Captures keystrokes on a compromised
system
Rootkit Set of hacker tools used after attacker has
broken into a computer system and gained
root-level access
Zombie Program activated on an infected machine
that is activated to launch attacks on other
machines

Malicious software can be divided into two categories: those that need a host program, and
those that are independent.
The former are essentially fragments of programs that cannot exist independently of some
actual application program, utility, or system program. Viruses, logic bombs, and backdoors
are examples. The latter are self-contained programs that can be scheduled and run by the
operating system. Worms and zombie programs are examples.

The Nature of Viruses A virus is a piece of software that can "infect" other programs by
modifying them; the modification includes a copy of the virus program, which can then
go on to infect other programs. A virus can do anything that other programs do. The only
difference is that it attaches itself to another program and executes secretly when the
host program is run. Once a virus is executing, it can perform any function, such as erasing
files and programs. During its lifetime, a typical virus goes through the following four
phases:

195
  Dormant phase: The virus is idle. The virus will eventually be activated by some
event, such as a date, the presence of another program or file, or the capacity of
the disk exceeding some limit. Not all viruses have this stage.
 Propagation phase: The virus places an identical copy of itself into other
programs or into certain system areas on the disk. Each infected program will now
contain a clone of the virus, which will itself enter a propagation phase.
 Triggering phase: The virus is activated to perform the function for which it was
intended. As with the dormant phase, the triggering phase can be caused by a
variety of system events, including a count of the number of times that this copy
of the virus has made copies of itself.
 Execution phase: The function is performed. The function may be harmless, such
as a message on the screen, or damaging, such as the destruction of programs and
data files.
Virus Structure
A virus can be prepended or postpended to an executable program, or it can be
embedded in some other fashion. The key to its operation is that the infected program,
when invoked, will first execute the virus code and then execute the original code of the
program. An infected program begins with the virus code and works as follows.
The first line of code is a jump to the main virus program. The second line is a special
marker that is used by the virus to determine whether or not a potential victim program
has already been infected with this virus. When the program is invoked, control is
immediately transferred to the main virus program. The virus program first seeks out
uninfected executable files and infects them. Next, the virus may perform some action,
usually detrimental to the system. This action could be performed every time the
program is invoked, or it could be a logic bomb that triggers only under certain
conditions. Finally, the virus transfers control to the original program. If the infection
phase of the program is reasonably rapid, a user is unlikely to notice any difference
between the execution of an infected and uninfected program.
A virus such as the one just described is easily detected because an infected version of a
program is longer than the corresponding uninfected one. A way to thwart such a simple
means of detecting a virus is to compress the executable file so that both the infected and
uninfected versions are of identical length.. The key lines in this virus are numbered, and

196
Figure 19.3 [COHE94] illustrates the operation. We assume that program P1 is infected
with the virus CV. When this program is invoked, control passes to its virus, which
performs the following steps:

 For each uninfected file P2 that is found, the virus first compresses that file to
produce P'2, which is shorter than the original program by the size of the virus.

 A copy of the virus is prepended to the compressed program.

 The compressed version of the original infected program, P'1, is uncompressed

 The uncompressed original program is executed.

In this example, the virus does nothing other than propagate. As in the previous example,
the virus may include a logic bomb.
Initial Infection
Once a virus has gained entry to a system by infecting a single program, it is in a position
to infect some or all other executable files on that system when the infected program
executes. Thus, viral infection can be completely prevented by preventing the virus from
gaining entry in the first place. Unfortunately, prevention is extraordinarily difficult
because a virus can be part of any program outside a system. Thus, unless one is content
to take an absolutely bare piece of iron and write all one's own system and application
programs, one is vulnerable.

197
Types of Viruses
Following categories as being among the most significant types of viruses:
 Parasitic virus: The traditional and still most common form of virus. A parasitic
virus attaches itself to executable files and replicates, when the infected program
is executed, by finding other executable files to infect.
 Memory-resident virus: Lodges in main memory as part of a resident system
program. From that point on, the virus infects every program that executes.
 Boot sector virus: Infects a master boot record or boot record and spreads when
a system is booted from the disk containing the virus.
 Stealth virus: A form of virus explicitly designed to hide itself from detection by
antivirus software.
 Polymorphic virus: A virus that mutates with every infection, making detection
by the "signature" of the virus impossible.
 Metamorphic virus: As with a polymorphic virus, a metamorphic virus mutates
with every infection. The difference is that a metamorphic virus rewrites itself
completely at each iteration, increasing the difficulty of detection. Metamorphic
viruses my change their behavior as well as their appearance.
One example of a stealth virus was discussed earlier: a virus that uses
compression so that the infected program is exactly the same length as an uninfected
version. Far more sophisticated techniques are possible. For example, a virus can place
intercept logic in disk I/O routines, so that when there is an attempt to read suspected
portions of the disk using these routines, the virus will present back the original,
uninfected program.
A polymorphic virus creates copies during replication that are functionally
equivalent but have distinctly different bit patterns

Macro Viruses
In the mid-1990s, macro viruses became by far the most prevalent type of virus. Macro
viruses are particularly threatening for a number of reasons:
1. A macro virus is platform independent. Virtually all of the macro viruses infect
Microsoft Word documents. Any hardware platform and operating system that supports
Word can be infected.

198
2. Macro viruses infect documents, not executable portions of code. Most of the
information introduced onto a computer system is in the form of a document rather than
a program.
3. Macro viruses are easily spread. A very common method is by electronic mail.

Macro viruses take advantage of a feature found in Word and other office
applications such as Microsoft Excel, namely the macro. In essence, a macro is an
executable program embedded in a word processing document or other type of file.
Typically, users employ macros to automate repetitive tasks and thereby save keystrokes.
The macro language is usually some form of the Basic programming language. A user
might define a sequence of keystrokes in a macro and set it up so that the macro is
invoked when a function key or special short combination of keys is input. Successive
releases of Word provide increased protection against macro viruses. For example,
Microsoft offers an optional Macro Virus Protection tool that detects suspicious Word
files and alerts the customer to the potential risk of opening a file with macros. Various
antivirus product vendors have also developed tools to detect and correct macro viruses.
E-mail Viruses
A more recent development in malicious software is the e-mail virus. The first rapidly
spreading e-mail viruses, such as Melissa, made use of a Microsoft Word macro embedded
in an attachment. If the recipient opens the e-mail attachment, the Word macro is
activated. Then
1. The e-mail virus sends itself to everyone on the mailing list in the user's e-mail package.
2. The virus does local damage.

Worms
A worm is a program that can replicate itself and send copies from computer to computer
across network connections. Upon arrival, the worm may be activated to replicate and
propagate again. Network worm programs use network connections to spread from
system to system. Once active within a system, a network worm can behave as a computer
virus or bacteria, or it could implant Trojan horse programs or perform any number of
disruptive or destructive actions. To replicate itself, a network worm uses some sort of
network vehicle. Examples include the following:
 Electronic mail facility: A worm mails a copy of itself to other systems.
199
  Remote execution capability: A worm executes a copy of itself on another system.
 Remote login capability: A worm logs onto a remote system as a user and then
uses commands to copy itself from one system to the other.
The new copy of the worm program is then run on the remote system where, in
addition to any functions that it performs at that system, it continues to spread in the
same fashion. A network worm exhibits the same characteristics as a computer virus: a
dormant phase, a propagation phase, a triggering phase, and an execution phase.

The Morris Worm

The Morris worm was designed to spread on UNIX systems and used a number of
different techniques for propagation.
1. It attempted to log on to a remote host as a legitimate user. In this method, the worm
first attempted to crack the local password file, and then used the discovered passwords
and corresponding user IDs. The assumption was that many users would use the same
password on different systems. To obtain the passwords, the worm ran a password-
cracking program that tried
a. Each user's account name and simple permutations of it
b. A list of 432 built-in passwords that Morris thought to be likely
candidates
c. All the words in the local system directory
2. It exploited a bug in the finger protocol, which reports the whereabouts of a remote
user.
3. It exploited a trapdoor in the debug option of the remote process that receives and
sends mail.
If any of these attacks succeeded, the worm achieved communication with the operating
system command interpreter.
Recent Worm Attacks In late 2001, a more versatile worm appeared, known as Nimda.
Nimda spreads by multiple mechanisms:
 from client to client via e-mail
 from client to client via open network shares
 from Web server to client via browsing of compromised Web sites
 from client to Web server via active scanning for and exploitation of various
Microsoft
200
FIREWALLS
A firewall is inserted between the premises network and the Internet to establish
a controlled link and to erect an outer security wall or perimeter, forming a single choke
point where security and audit can be imposed. A firewall:
1. Defines a single choke point that keeps unauthorized users out of the protected
network, prohibits potentially vulnerable services from entering or leaving the network,
and provides protection from various kinds of IP spoofing and routing attacks.

2. provides a location for monitoring security-related events

3. is a convenient platform for several Internet functions that are not security related,
such as NAT and Internet usage audits or logs

4. A firewall can serve as the platform for IPSec to implement virtual private networks.

Design Goals of Firewalls

All traffic from inside to outside must pass through the firewall (physically blocking all
access to the local network except via the firewall)

Only authorized traffic (defined by the local security police) will be allowed to pass

The firewall itself is immune to penetration (use of trusted system with a secure
operating system)
The four general techniques that firewalls use to control access and enforce the sites
security policies are:
Service control: Determines the types of Internet services that can be accessed, inbound
or outbound

Direction control: Determines the direction in which particular service requests are
allowed to flow

User control: Controls access to a service according to which user is attempting to

access it

Behavior control: Controls how particular services are used (e.g. filter e-mail)
The limitations of Firewalls are:
1. Cannot protect against attacks that bypass the firewall, eg PCs with dial-out capability
to an ISP, or dial-in modem pool use.

201
2. do not protect against internal threats, eg disgruntled employee or one who cooperates
with an attacker

3. cannot protect against the transfer of virus-infected programs or files, given wide
variety of O/S & applications supported
Types of Firewalls
Firewalls are generally classified as three types: packet filters, application-level
gateways, & circuit-level gateways.
Packet-filtering Router
A packet-filtering router applies a set of rules to each incoming and outgoing IP packet to
forward or discard the packet. Filtering rules are based on information contained in a
network packet such as src & dest IP addresses, ports, transport protocol & interface.

If there is no match to any rule, then one of two default policies are applied:
that which is not expressly permitted is prohibited (default action is discard packet),
conservative policy

that which is not expressly prohibited is permitted (default action is forward packet),
permissive policy

The default discard policy is more conservative. Initially, everything is blocked, and
services must be added on a case-by-case basis. This policy is more visible to users, who
are more likely to see the firewall as a hindrance. The default forward policy increases
ease of use for end users but provides reduced security; the security administrator must,
in essence, react to each new security threat as it becomes known. One advantage of a

202
packet-filtering router is its simplicity. Also, packet filters typically are transparent to
users and are very fast.

The table gives some examples of packet-filtering rule sets. In each set, the rules are
applied top to bottom.

A. Inbound mail is allowed to a gateway host only (port 25 is for SMTP incoming
B. explicit statement of the default policy
C. tries to specify that any inside host can send mail to the outside, but has problem that
an outside machine could be configured to have some other application linked to port 25
D. properly implements mail sending rule, by checking ACK flag of a TCP segment is set
E. this rule set is one approach to handling FTP connections
Some of the attacks that can be made on packet-filtering routers & countermeasures are:
IP address spoofing: where intruder transmits packets from the outside with internal
host source IP addresses, need to filter & discard such packets

Source routing attacks: where source specifies the route that a packet should take to
bypass security measures, should discard all source routed packets

Tiny fragment attacks: intruder uses the IP fragmentation option to create extremely
small fragments and force the TCP header information into separate fragments to
circumvent filtering rules needing full header info, can enforce minimum fragment size
to include full header.

203
Stateful Packet Filters
A traditional packet filter makes filtering decisions on an individual packet basis and does
not take into consideration any higher layer context. A stateful inspection packet filter
tightens up the rules for TCP traffic by creating a directory of outbound TCP connections,
and will allow incoming traffic to high-numbered ports only for those packets that fit the
profile of one of the entries in this directory. Hence they are better able to detect bogus
packets sent out of context.
APPLICATION LEVEL GATEWAY
An application-level gateway (or proxy server), acts as a relay of application-level
traffic. The user contacts the gateway using a TCP/IP application, such as Telnet or FTP,
and the gateway asks the user for the name of the remote host to be accessed. When the
user responds and provides a valid user ID and authentication information, the gateway
contacts the application on the remote host and relays TCP segments containing the
application data between the two endpoints. If the gateway does not implement the proxy
code for a specific application, the service is not supported and cannot be forwarded
across the firewall.

Application-level gateways tend to be more secure than packet filters. Rather than trying
to deal with the numerous possible combinations that are to be allowed and forbidden at
the TCP and IP level, the application-level gateway need only scrutinize a few allowable
applications. In addition, it is easy to log and audit all incoming traffic at the application
level. A prime disadvantage of this type of gateway is the additional processing overhead
on each connection. In effect, there are two spliced connections between the end users,
with the gateway at the splice point, and the gateway must examine and forward all traffic
in both directions.

204
CIRCUIT LEVEL GATEWAY
A circuit-level gateway relays two TCP connections, one between itself and an
inside TCP user, and the other between itself and a TCP user on an outside host. Once the
two connections are established, it relays TCP data from one connection to the other
without examining its contents. The security function consists of determining which
connections will be allowed. It is typically used when internal users are trusted to decide
what external services to access.
One of the most common circuit-level gateways is SOCKS, defined in RFC 1928. It
consists of a SOCKS server on the firewall, and a SOCKS library & SOCKS-aware
applications on internal clients. The protocol described here is designed to provide a
framework for client-server applications in both the TCP and UDP domains to
conveniently and securely use the services of a network firewall. The protocol is
conceptually a "shim-layer" between the application layer and the transport layer, and as
such does not provide network-layer gateway services, such as forwarding of ICMP
messages.

Bastion Host
A bastion host is a critical strong point in the network’s security, serving as a platform
for an application-level or circuit-level gateway, or for external services. It is thus
potentially exposed to "hostile" elements and must be secured to withstand this. Common
characteristics of a bastion host include that it:
 executes a secure version of its O/S, making it a trusted system
 has only essential services installed on the bastion host

205
  may require additional authentication before a user is allowed access to the proxy
services
 is configured to support only a subset of the standard application’s command set,
with access only to specific hosts
 maintains detailed audit information by logging all traffic
 has each proxy module a very small software package specifically designed for
network security
 has each proxy independent of other proxies on the bastion host
 have a proxy performs no disk access other than to read its initial configuration
file
 have each proxy run as a non-privileged user in a private and secured directory
 A bastion host may have two or more network interfaces (or ports), and must be
trusted to enforce trusted separation between these network connections,
relaying traffic only according to policy.

Firewall Configurations
In addition to the use of a simple configuration consisting of a single system, more
complex configurations are possible and indeed more common. There are three common
firewall configurations.
The following figure shows the “screened host firewall, single-homed bastion
configuration”, where the firewall consists of two systems:
• a packet-filtering router - allows Internet packets to/from bastion only

• a bastion host - performs authentication and proxy functions

206
This configuration has greater security, as it implements both packet-level & application-
level filtering, forces an intruder to generally penetrate two separate systems to
compromise internal security, & also affords flexibility in providing direct Internet access
to specific internal servers (eg web) if desired.

The next configuration illustrates the “screened host firewall, dual-homed bastion
configuration” which physically separates the external and internal networks, ensuring
two systems must be compromised to breach security. The advantages of dual layers of
security are also present here.

Again, an information server or other hosts can be allowed direct communication with
the router if this is in accord with the security policy, but are now separated from the
internal network.
The third configurations illustrated below shows the “screened subnet firewall
configuration”, being the most secure shown.

It has two packet-filtering routers, one between the bastion host and the Internet and the
other between the bastion host and the internal network, creating an isolated sub-
network. This may consist of simply the bastion host but may also include one or more
information servers and modems for dial-in capability. Typically, both the Internet and
the internal network have access to hosts on the screened subnet, but traffic across the
screened subnet is blocked.
207
This configuration offers several advantages:
• There are now three levels of defense to thwart intruders

• The outside router advertises only the existence of the screened subnet to the Internet;
therefore the internal network is invisible to the Internet
• Similarly, the inside router advertises only the existence of the screened subnet to the
internal network; hence systems on the inside network cannot construct direct routes to
the Internet

16. ADDITIONAL TOPICS

COMPUTER FORENSICS

Computer security and computer forensics are distinct but related disciplines due
to the degree of overlap of raw material used by both fields. In general, computer security
aims to preserve a system as it is meant to be (as per the security policies) whereas
computer forensics (and especially network or intrusion forensics) sets out to explain
how a policy became violated. Therefore, the main difference can be seen as one of system
integrity versus culpability for an event or set of events.

Whereas the two fields may use similar data sources, they have different and
sometimes opposing aims. For example, security countermeasures such as encryption or
data wiping tools may work against the computer forensic investigation. The security
measures will complicate the investigation as the data must be decrypted prior to
analysis. In addition, security functions tend to only implement minimal logging by
design. Therefore, not all the information required will be available to the forensic
analyst.

Computer security is an established field of computer science, whilst computer

forensics is an emergent area. Increasingly, computer security will involve forensic
investigation techniques, and vice versa. Therefore, both fields have much to learn from
each other.

208
17. Previous Question Papers

209
210
211
212
213
 JNTU IV B.Tech I Semester Supplimentary Examinations, February
2008

NETWORK SECURITY AND CRYPTOGRAPHY

(Computer Science & Engineering)

SET-I

1. This problem provides a numerical example of encryption using a one-round version

of DES. We start with the same bit pattern for the key and plain text, namely, In
hexadecimal notation 0 1 2 3 4 5 6 7 8 9 A B C D E F

Inbinary notation: 0000 0001 0010 0011 0100 0101 0110 0111

1000 1001 1010 1011 1100 1101 1110 1111

(a) Derive K1, the first – round subkey.

(b) Derive L0,R0

(c) Expand R0 to get E[R0]

(d) Calculate A=E[R0] _ K1.

(e) Group the 48-bit result of (d) into sets of 6 bits and evaluate the corresponding

S-box substitutions.

(f) Cancatenate the results of (e) to get a 32-bit result,B.

(g) Apply the permutation to get P(B).

(h) Calculate R1=P(B) _ L0

(i) write down the cipher text.

2. (a) List the characteristics of advanced block ciphers.

(b) What are the differences between RC5 and RC2?

3. (a) What are two different uses of public – key cryptography related to key
Distribution?

214
(b) Explain RSA Algorithm?

4. (a) Explain in detail about Euclid’s Algorithm.

(b) Determine gcd(1970,1066).

5. (a) What is a difference between little-endian and big-endian format?

(b) What basic arithmetical and logical functions are used in MD5?

6. (a) List limitations of SMTP/822 scheme?

(b) What are the MIME specifications?

7. (a) What are the basic approaches to building SAs?

(b) What are the roles of the Oakley key determination protocol and ISAKMP in IPSec?

8. (a) what information used by a typical packet-filtering router?

(b) What are some weaknesses of a packet-filtering router?

(c) What is the difference between a packet-filtering router and a stateful inspection
firewall?

JNTU KAKINADA R07 IV B.Tech. I Semester Supplementary Examinations,

February/March, 2012
NETWORK SECURITY

SET-1

Time: 3 hours Max. Marks: 80

Answer any FIVE Questions
All Questions carry equal marks
215
*****
1. a) What is a format string? Give an example.
b) What is the role of stack at format strings? Explain.
c) Discuss the exploitation method using pure format strings.

2. a) Differentiate Confusion and Diffusion as applicable to cryptography.How are they

implemented using Substitution-Permutation Network (SPN) by Feistel Cipher?
b) What are the Characteristics of a good Hash Function?
c) Explain an attack to which MAC is vulnerable. How to make MAC more secure?

3. Explain the message sequence of Kerberos V5. Also explain the differences between
Kerberos V4 and V5.

4. a) Illustrate with a neat diagram the steps in extracting the information at the receiver
site in PGP.
b) Briefly explain how PGP offers confidentiality with one time session key.

5. a) What are the services provided by IPSec?

b) What are the formats of Authentication Header and Encapsulating Security Payload?

6. a) Who are the participants in Secure Electronic Transaction protocol?

b) What are the business requirements of SET?
c) What are the key features of SET?

7. a) Give the format for SNMP v3 Message with User Security Model. Explain.
b) How does the design of USM counterfeit the threats?

8. a) What are the different classes of intruders?

b) What are the different approaches for rule based intrusion detection?
c) Write short notes on UNIX password management.

216
18. UNIT WISE QUESTION BANK

Unit-1
1. Define a Security attack. Explain in detail about the various types of attacks an
Internetwork is vulnerable to.
2. Define Information Security and explain its significance in today’s world. Also clearly
bring out the meaning of the following related terms: Computer Security, Network
Security and Internet Security with relevant examples.
3. Discuss the following terms in detail with relevant examples:
a. Interruption ii. Interception iii. Modification iv. Fabrication
4. Explain the different types of security attacks, security services and mechnasims?
5. Discuss Network security model with neat illustration and explain the components of
the model.
6. Explain the substitution techniques a) Ceaser Cipher b) Play Fair Cipher c) Hill Cipher
7. Explain the transposition technique.
8. Compare and contrast between Cryptography and Cryptology.

Unit 2
1. With a neat block diagram explain the DES algorithm?
2. Explain Blowfish algorithm.
3. With neat illustration explain Advanced Encryption Standard algorithm (AES).
4. Write short notes on: (a) Location of encryption devices (b) Fiestel cipher structure
5. Differentiate between DES and AES algorithms.
6. Enumerate the various cipher block modes of operation.
7. Explain the various Key distribution methods
8. Explain the structure of the Conventional Public-key encryption with relevant
illustrations.
9. Describe the approaches of key distribution in public key cryptosystems
10. Explain RSA Algorithm
11. Explain about Diffie Hellman Key Exchange
217
 UNIT-3
1. Explain the importance of Secure Hash functions with relevant examples.
2. Describe the various approaches of message authentication?
3. Explain the MD5 algorithm
4. Explain the various steps involved in the HMAC algorithm
5. Explain the Secure Hash Algorithm (SHA-1) in detail
6. Describe Kerberos?
7. Explain the types of digital signature.
8. Explain DSS
9. Explain X.509 authentication service
10. Discuss Biometric Authentication.

UNIT-4
1. Clearly explain in detail the Multipurpose Internet Mail Extensions (MIME).
2. Explain the general format of a PGP message with a pictorial representation.
3. Describe the five principal services that Pretty Good Privacy (PGP) provides
4. Explain PGP (Pretty Good Privacy)?
5. Discuss the features of S/MIME?
6. What is R64 conversion? Why is R64 conversion useful for an e-mail application?
7. Discuss about the documents regarding IPSec protocol?
8. Explain the benefits of IPSec?
9. Explain tunnel mode and transport mode functionality?
10. Discuss the purpose of SA selectors?
11. Discuss about Oakley key determination protocol?

UNIT-5
1. What are the two levels of alerts? List the alerts under them?

218
2. Discuss how SSL record protocol provides confidentiality and message integrity for
SSL connections?
3. What protocol is used to convey SSL-related alerts to the peer entity? Give the
protocol format? Describe the fields?
4. What is the difference between an SSL connection and an SSL session? List and briefly
explain the parameters that define an SSL session state?
5. Explain the various web security threats?
6. List and explain the SET requirements?
7. Explain the operations of SSL Record Protocol
8. Explain the significance of dual signature in SET
9. What is the structure of a virus?
10. Discuss the two techniques for developing an effective and efficient proactive
password checker?
11. Write short note on intruder?
12. With neat diagrams show the differences between screened host firewall single
homed bastion and screened host firewall dual homed bastion?
13. Explain the principles and limitations of a firewall?
14. Write short notes: a) Firewalls b) Instrusion Detection systems
15. What is a bastion host? List the common characteristics of a bastion host?
16. Discuss in detail different types of firewall?

219
19. ASSIGNMENT QUESTIONS
Assignment-1

1. Explain security attacks, services and the related mechanisms

2. Explain internetwork security
3. Explain how gateway works in internetwork security model
4. Explain Substitution and Transposition techniques

Assignent-2

1 Explain about conventional principles for encryption

2 Describe basic fiestel cipher structure for principle encryption algorithms
3 Explain basic DES algorithm and how it is dependent on fiestal structure
4 Describe public-key cryptography principles

5 Explain how public key cryptography algorithms are framed depending upon the
principles
6 Explain RSA algorithms in detail
7 Explain how key exchange is done using Diffie-Hellman key exchange
Assignmet-3

1. Explain how SHA-512 works for message authentication

2. Describe hoe hash functions was developed based on MAC code
3. Describe one way hash functions for message authentication
4. In detail explain Kerberos 4 and version 4 authentication dialogue

5. Explain how certification are issued using x.509 authentication service

6. Explain Kerberos realms and multiple kerberos

Assignmet-4

1. Explain the features of PGP

2. Explain how key rings work during message authentication and encryption
3. Explain S/MIME?
4. Describe the concepts of MIME
220
 5. Explain the following
a. Compatability
b. Key legitimacy
c. Multipart and message type in MIME
6. Explain the architecture of IPSec
7. With a neat diagram explain the architecture of authentication header
8. Explain how encapsulation security payload works

9. Describe security association

Assignmet-5

1. Describe the requirements in web security

2. Describe how SSL works
3. Explain about TLS
4. Describe SET in detail
5. Explain secure session layer architecture with its requirements with a neat
diagram
6. Explain the concept of intruders in detail
7. Explain how the principles of firewall works in security
8. Write a brief notes on intrusion detection systems

20. OBJECTIVE QUESTIONS

Unit-1:

1. Which of the following pieces of information can be found in the IP header?

a. Source address of the IP packet

b. Destination address for the IP packet
c. Sequence number of the IP packet
d. Both (A) and (B) only.

2. We also don't want our undeliverable packets to hop around forever. What
feature/flag limits the life of an IP packet on the network?

a. Time to Live counter

b. Subnet Mask
221
c. Header Checksum
d. Wackamole field

3. Which of the following are application-level encryption protocols that I would most
likely use to securely bank online?

a. SSL and SET

b. Verisign and SHA1
c. READY, SET, and GO
d. PGP, PEM, and SSL

4. We don't want our packets to get lost in transit. Which OSI layer is responsible for
ordered delivery of packets?

a. Network
b. Link
c. Transport
d. Physical

5. When my teleconference data packets reach the destination computer, what

information in the packet is used by the destination computer to figure out that the
packets belong to the teleconferencing application?

a. Firewall rules
b. Port numbers in the TCP/UDP header
c. Three-way handshake initiated at the start of the communication.
d. IANA subnet class number in the first octet of the IP address

6. I want to request secure web pages using https://. What port will I need to open on
my firewall to allow these SSL-encrypted packets to flow?

a. 161
b. 53
c. 6000
d. 443
e. 137

7. Based on what we have learned about TCP and UDP packet accounting mechanisms,
which transport control protocol would I most likely use for Internet
Telephony/Teleconferencing (Voice over IP)?

a. UDP - Because I don't want to retransmit if some of the packets get lost.
b. UDP - Because I want to make sure that no packets get lost.
c. TCP - Because I don't want to retransmit if some of the packets get lost.
d. TCP - Because I want to retransmit lost voice IP packets later on in the conversation.

8. What is the standard IANA port number used for requesting web pages?

222
a. 80
b. 53
c. 21
d. 25

9. In tunnel mode IPsec protects the

a) entire IP packet
b) IP header
c) IP payload
d) none of the mentioned

10. In tunnel mode IPsec protects the

a) entire IP packet
b) IP header
c) IP payload
d) none of the mentioned

11. In tunnel mode IPsec protects the

a) entire IP packet
b) IP header
c) IP payload
d) none of the mentioned

12. In asymmetric key cryptography, the private key is kept by

a) sender
b) receiver
c) sender and receiver
d) all the connected devices to the network

13. In cryptography, what is cipher?

a) algorithm for performing encryption and decryption
b) encrypted message
c) both (a) and (b)
d) none of the mentioned

14. Which one of the following algorithm is not used in asymmetric-key cryptography?
a) RSA algorithm
b) diffie-hellman algorithm
c) electronic code book algorithm
d) none of the mentioned

15. In cryptography, the order of the letters in a message is rearranged by

a) transpositional ciphers
b) substitution ciphers

223
c) both (a) and (b)
d) none of the mentioned

Unit-2

1. What is data encryption standard (DES)?

a) block cipher
b) stream cipher
c) bit cipher
d) none of the mentioned

2. Cryptanalysis is used
a) to find some insecurity in a cryptographic scheme
b) to increase the speed
c) to encrypt the data
d) none of the mentioned

3. Which one of the following is a cryptographic protocol used to secure HTTP

connection?
a) stream control transmission protocol (SCTP)
b) transport layer security (TSL)
c) explicit congestion notification (ECN)
d) resource reservation protocol

4. Voice privacy in GSM cellular telephone protocol is provided by

a) A5/2 cipher
b) b5/4 cipher
c) b5/6 cipher
d) b5/8 cipher

5. ElGamal encryption system is

a) symmetric key encryption algorithm
b) asymmetric key encryption algorithm
c) not an encryption algorithm
d) none of the mentioned

6. Cryptographic hash function takes an arbitrary block of data and returns

a) fixed size bit string
b) variable size bit string
c) both (a) and (b)
d) none of the mentioned
7. Secure shell (SSH) network protocol is used for
a) secure data communication
224
b) remote command-line login
c) remote command execution
d) all of the mentioned

8. SSH can be used in only

a) unix-like operating systems
b) windows
c) both (a) and (b)
d) none of the mentioned

9. SSH uses _______ to authenticate the remote computer.

a) public-key cryptography
b) private-key cryptography
c) both (a) and (b)
d) none of the mentioned

10. Which standard TCP port is assigned for contacting SSH servers?
a) port 21
b) port 22
c) port 23
d) port 24

11. Which one of the following protocol can be used for login to a shell on a remote host
except SSH?
a) telnet
b) rlogin
c) both (a) and (b)
d) none of the mentioned

12. Which one of the following is a file transfer protocol using SSH?
a) SCP
b) SFTP
c) rsync
d) all of the mentioned

13. SSH-2 does not contain

a) transport layer
b) user authentication layer
c) physical layer
d) connection layer

225
14. Which one of the following feature was present in SSH protocol, version 1?
a) password changing
b) periodic replacement of session keys
c) support for public-key certificates
d) none of the mentioned

Unit-3
1. SCP protocol is evolved from _____ over SSH.
a) RCP protocol
b) DHCP protocol
c) MGCP protocol
d) none of the mentioned

2. Which one of the following authentication method is used by SSH?

a) public-key
b) host based
c) password
d) all of the mentioned
3.Transport layer aggregates data from different applications into a single stream
before passing it to
a) network layer
b) data link layer
c) application layer
d) physical layer

4. Which one of the following is a transport layer protocol used in internet?

a) TCP
b) UDP
c) both (a) and (b)
d) none of the mentioned
5. User datagram protocol is called connectionless because
a) all UDP packets are treated independently by transport layer
b) it sends data as a stream of related packets
c) both (a) and (b)
d) none of the mentioned

6. Transmission control protocol is

a) connection oriented protocol
b) uses a three way handshake to establish a connection
c) recievs data from application as a single stream
d) all of the mentioned

226
7. An endpoint of an inter-process communication flow across a computer network is
called
a) socket
b) pipe
c) port
d) none of the mentioned

8. Socket-style API for windows is called

a) wsock
b) winsock
c) wins
d) none of the mentioned

9. Which one of the following is a version of UDP with congestion control?

a) datagram congestion control protocol
b) stream control transmission protocol
c) structured stream transport
d) none of the mentioned

10. A _____ is a TCP name for a transport service access point.

a) port
b) pipe
c) node
d) none of the mentioned

11. Transport layer protocols deals with

a) application to application communication
b) process to process communication
c) node to node communication
d) none of the mentioned

12. Which one of the following is a transport layer protocol?

a) stream control transmission protocol
b) internet control message protocol
c) neighbor discovery protocol
d) dynamic host configuration protocol
13. The data link layer takes the packets from _____ and encapsulates them into frames
for transmission.
a) network layer
b) physical layer
c) transport layer
d) application layer

227
14. Which one of the following task is not done by data link layer?
a) framing
b) error control
c) flow control
d) channel coding

15. Which sublayer of the data link layer performs data link functions that depend upon
the type of medium?
a) logical link control sublayer
b) media access control sublayer
c) network interface control sublayer
d) none of the mentioned

Unit-4

1. The network layer protocol of internet is

a) ethernet
b) internet protocol
c) hypertext transfer protocol
d) none of the mentioned

2. ICMP is primarily used for

a) error and diagnostic functions
b) addressing
c) forwarding
d) none of the mentioned

3. ATM and frame relay are

a) virtual circuit networks
b) datagram networks
c) both (a) and (b)
d) none of the mentioned

4. ATM uses the

a) asynchronous frequency division multiplexing
b) asynchronous time division multiplexing
c) asynchronous space division multiplexing
d) none of the mentioned

5. ATM standard defines ____ layers.

a) 2
b) 3
228
c) 4
d) 5

6. ATM can be used for

a) local area network
b) wide area network
c) both (a) and (b)
d) none of the mentioned

7. An ATM cell has the payload field of

a) 32 bytes
b) 48 bytes
c) 64 bytes
d) 128 bytes

8. Frame relay has error detection at the

a) physical layer
b) data link layer
c) network layer
d) transport layer

9. Virtual circuit identifier in frame relay is called

a) data link connection identifier
b) frame relay identifier
c) cell relay identifier
d) none of the mentioned

10. Frame relay has only

a) physical layer
b) data link layer
c) both (a) and (b)
d) none of the mentioned

11. In frame relay networks, extended address is used

a) to increase the range of data link connection identifiers
b) for error detection
c) both (a) and (b)
d) none of the mentioned

12. What is FRAD in frame relay network?

a) FRAD assembles and disassembles the frames coming from other protocols
b) FRAD is used for modulation and demodulation

229
c) FRAD is used for error detection
d) none of the mentioned

13. Which of the following is not applicable for IP?

a) Error reporting
b) Handle addressing conventions
c) Datagram format
d) Packet handling conventions

14. Which of the following field in IPv4 datagram is not related to fragmentation?
a) Flags
b) Offset
c) TOS
d) Identifier

15. The TTL field has value 10. How many routers (max) can process this datagram?
a) 11
b) 5
c) 10
d) 1

Unit-5
1. If the value in protocol field is 17, the transport layer protocol used is ____.
a) TCP
b) UDP
c) Either of the mentioned
d) None of the mentioned

2. The data field can carry which of the following?

a) TCP segemnt
b) UDP segment
c) ICMP messages
d) None of the mentioned

3. What should be the flag value to indicate the last fragment?

a) 0
b) 1
c) TTl value
d) None of the mentioned

4. Which of these is not applicable for IP protocol?

a) is connectionless
230
b) offer reliable service
c) offer unreliable service
d) None of the mentioned

5. Fragmentation has following demerits

a) complicates routers
b) open to DOS attack
c) overlapping of fragments.
d) All of the mentioned

6. Which field helps to check rearrangement of the fragments?

a) offset
b) flag
c) TTL
d) identifer
7. The size of IP address in IPv6 is
a) 4bytes
b) 128bits
c) 8bytes
d) 100bits

8. The header length of an IPv6 datagram is _____.

a) 10bytes
b) 25bytes
c) 30bytes
d) 40bytes

9. In the IPv6 header,the traffic class field is similar to which field in the IPv4 header?
a) Fragmentation field
b) Fast-switching
c) ToS field
d) Option field

10. IPv6 doesnot use ______ type of address

a) Broadcast
b) Multicast
c) Anycast
d) None of the mentioned

11. These are the features present in IPv4 but not in IPv6.
a) Fragmentation
b) Header checksum

231
c) Options
d) All of the mentioned

12. The ____ field determines the lifetime of IPv6 datagram

a) Hop limit
b) TTL
c) Next header
d) None of the mentioned

13. Dual-stack approach refers to

a) Implementing Ipv4 with 2 stacks
b) Implementing Ipv6 with 2 stacks
c) Node has both IPv4 and IPv6 support
d) None of the mentioned

14. Suppose two IPv6 nodes want to interoperate using IPv6 datagrams but are
connected to each other by intervening IPv4 routers. The best solution here is
a) use dual-stack approach
b) Tunneling
c) No solution
d) Replace the system

15. Teredo is an automatic tunneling technique. In each client the obfuscated IPv4
address is represented by bits
a) 96 to 127
b) 0 to 63
c) 80 to 95
d) 64 to 79
Unit-6

1) A local telephone network is an example of a _______ network

a) Packet switched
b) Circuit switched
c) both of the mentioned
d) none of the mentioned

2) Most packet switches use this principle

a) Stop and wait
b) Store and forward
c) Both of the mentioned
d) None of the mentioned

232
3) If there are N routers from source to destination, total end to end delay in sending
packet P(L->number of bits in the packet R-> transmission rate)
a) N
b) (N*L)/R
c) (2N*L)/R
d) L/R

4) Method(s) to move data through a network of links and switches

a) Packet switching
b) Circuit switching
c) Line switching
d) Both a and b

5) The resources needed for communication between end systems are reserved for the
duration of session between end systems in ________
a) Packet switching
b) Circuit switching
c) Line switching
d) Frequency switching

6) As the resouces are reserved between two communicating end systems in circuit
switching, this is achieved
a) authentication
b) guaranteed constant rate
c) reliability
d) store and forward

7) In _________ resources are allocated on demand.

a) packet switching
b) circuit switching
c) line switching
d) frequency switching
8)SONET stands for
a) synchronous optical network
b) synchronous operational network
c) stream optical network
d) shell operational network

9) In SONET, STS-1 level of electrical signalling has the data rate of

a) 51.84 Mbps
b) 155.52 Mbps
c) 466.56 Mbps

233
d) none of the mentioned

10) The path layer of SONET is responsible for the movement of a signal
a) from its optical source to its optical destination
b) across a physical line
c) across a physical section
d) none of the mentioned

11)The photonic layer of the SONET is similar to the _____ of OSI model.
a) network layer
b) data link layer
c) physical layer
d) none of the mentioned

12) In SONET, each synchronous transfer signal STS-n is composed of

a) 2000 frames
b) 4000 frames
c) 8000 frames
d) 16000 frames

13) Which one of the following is not true about SONET?

a) frames of lower rate can be synchronously time-division multiplexed into a higher-
rate frame
b) multiplexing is synchronous TDM
c) all clocks in the network are locked to a master clock
d) none of the mentioned

14) A linear SONET network can be

a) point-to-point
b) multi-point
c) both (a) and (b)
d) none of the mentioned

15) Automatic protection switching in linear network is defined at the

a) line layer
b) section layer
c) photonic layer
d) path layer

Unit-7
1. A unidirectional path switching ring is a network with
a) one ring
234
b) two rings
c) three rings
d) four rings

2. What is SDH?
a) SDH is similar standard to SONET developed by ITU-T
b) synchronous digital hierarchy
c) both (a) and (b)
d) none of the mentioned
3. The attackers a network of compromised devices known as
a) Internet
b) Botnet
c) Telnet
d) D-net

4. Which of the following is a form of DoS attack ?

a) Vulnerability attack
b) Bandwidth flooding
c) Connection flooding
d) All of the mentioned

5. The DoS attack is which the attacker establishes a large number of half-open or fully
open TCP connections at the target host
a) Vulnerability attack
b) Bandwidth flooding
c) Connection flooding
d) All of the mentioned

6. The DoS attack is which the attacker sends deluge of packets to the targeted host
a) Vulnerability attack
b) Bandwidth flooding
c) Connection flooding
d) All of the mentioned

7. Packet sniffers involve

a) Active receiver
b) Passive receiver
c) Both of the mentioned
d) None of the mentioned

8. Sniffers can be deployed in

a) Wired environment

235
b) WiFi
c) Ethernet LAN
d) All of the mentioned

9. Firewalls are often configured to block

a) UDP traffic
b) TCP traffic
c) Both of the mentioned
d) None of the mentioned
10.Secure shell (SSH) network protocol is used for
a) secure data communication
b) remote command-line login
c) remote command execution
d) all of the mentioned

11. SSH can be used in only

a) unix-like operating systems
b) windows
c) both (a) and (b)
d) none of the mentioned

12. SSH uses _______ to authenticate the remote computer.

a) public-key cryptography
b) private-key cryptography
c) both (a) and (b)
d) none of the mentioned

13. Which standard TCP port is assigned for contacting SSH servers?
a) port 21
b) port 22
c) port 23
d) port 24

14. Which one of the following protocol can be used for login to a shell on a remote host
except SSH?
a) telnet
b) rlogin
c) both (a) and (b)
d) none of the mentioned

15. Which one of the following is a file transfer protocol using SSH?
a) SCP

236
b) SFTP
c) rsync
d) all of the mentioned

Unit-8
1. SSH-2 does not contain
a) transport layer
b) user authentication layer
c) physical layer
d) connection layer

2. Which one of the following feature was present in SSH protocol, version 1?
a) password changing
b) periodic replacement of session keys
c) support for public-key certificates
d) none of the mentioned

3. SCP protocol is evolved from _____ over SSH.

a) RCP protocol
b) DHCP protocol
c) MGCP protocol
d) none of the mentioned

4. Which one of the following authentication method is used by SSH?

a) public-key
b) host based
c) password
d) all of the mentioned
5. Which of the following delay is faced by the packet in travelling from one end system
to another ?
a) Propagation delay
b) Queuing delay
c) Transmission delay
d) All of the mentioned

6. For a 10Mbps Ethernet link, if the length of the packet is 32bits, the transmission
delay is(in milliseconds)
a) 3.2
b) 32
c) 0.32
d) None of the mentioned

237
7. The time required to examine the packet’s header and determine where to direct the
packet is part of
a) Processing delay
b) Queuing delay
c) Transmission delay
d) All of the mentioned

8) Traffic intensity is given by, where L = number of bits in the packet a = average rate R
= transmission rate
a) La/R
b) LR/a
c) R/La
d) None of the mentioned

9) In the transfer of file between server and client, if the transmission rates along the
path is 10Mbps, 20Mbps, 30Mbps, 40Mbps. The throughput is usually
a) 20Mbps
b) 10Mbps
c) 40Mbps
d) 50Mbps

6) If end to end delay is given by dend-end = N(dproc + dtrans + dprop) is a non

congested network. 10) The number of routers between source and destination is
a) N/2
b) N
c) N-1
d) 2N

11) The total nodal delay is given by

a) dnodal = dproc – dqueue + dtrans + dprop
b) dnodal = dproc + dtrans – dqueue
c) dnodal = dproc + dqueue + dtrans + dprop
d) dnodal = dproc + dqueue – dtrans – dprop

12) In a network, If P is the only packet being transmitted and there was no earlier
transmission, which of the following delays could be zero
a) Propogation delay
b) Queuing delay
c) Transmission delay
d) Processing delay

13) Transmission delay does not depend on

a) Packet length
238
b) Distance between the routers
c) Transmission rate
d) None of the mentioned

14) Propagation delay depends on

a) Packet length
b) Transmission rate
c) Distance between the routers
d) None of the mentioned

21. Tutorial Problems

Tutorial-1

5. Explain security attacks, services and the related mechanisms

6. Explain internetwork security
7. Explain how gateway works in internetwork security model
8. Exercising Substitution and transposition techniques

Tutorial-2

8 Explain about conventional principles for encryption

9 Describe basic fiestal cipher structure for principle encryption algorithms
10 Explain basic DES algorithm and how it is dependent on fiestal structure
11 Describe public-key cryptography principles

12 Explain how public key cryptography algorithms are framed depending upon the
principles
13 Explain RSA algorithms in detail
14 Explain how key exchange is done using Diffie-Hellman key exchange

Tutorial-3
7. Explain how SHA-512 works for message authentication
8. Describe hoe hash functions was developed based on MAC code
9. Describe one way hash functions for message authentication
10. In detail explain Kerberos 4 and version 4 authentication dialogue

239
11. Explain how certification are issued using x.509 authentication service
12. Explain Kerberos realms and multiple kerberos

Tutorial-4

6. Explain the features of PGP

7. Explain how key rings work during message authentication and encryption
8. Explain S/MIME?
9. Describe the concepts of MIME
10. Explain the following
d. Compatability
e. Key legitimacy
f. Multipart and message type in MIME
6. Explain the architecture of IPSec
7. With a neat diagram explain the architecture of authentication header
8. Explain how encapsulation security payload works

9. Describe security association

Tutorial-5

9. Describe the requirements in web security

10. Describe how SSL works
11. Explain about TLS
12. Describe SET in detail
13. Explain secure session layer architecture with its requirements with a neat
diagram
14. Explain the concept of intruders in detail
15. Explain how the principles of firewall works in security
16. Write a brief notes on intrusion detection systems

240